Trending Automotive Exhaust Systems & Parts Products

What is Automotive Exhaust Systems & Parts?


Top Customer Reviews: DC Sports EX-1013 ...

Rating: 4 out of 5 with 56 ratings
4 / 5
This was a perfect arrival for the 4corridor after taking the big flow muffler welded until a otherwise normal system. Without a resonated tip one exhausts tended to have the 'boomy drone' in the low rpm light throttle place. This softened out of this something, has done a sound of less inner in general, but a better part is a sound 'polished' that is maintaining has orchestrated with a Hooker Aerochamber muffler in an outside of a vehicle. It sounds the small 'rough' on invaded with the odd 'bafft bafft bafft his' in goes, and now sounds the perfectly balanced deep 'blab-blab-blab-blab-blab' except smooth and throaty with the small burbles has invaded on. I expect it conceal it seats marks .
A Bad (-1 star) : Some rays to locate when maxed was to look cute while they bond out of a tube in an inch. I am planning in welding he until taking drawee of a ray of odd look in appearance.
5 / 5
I have posed mine in the 2015 Silverado with the 5.7 engine of litre. Have had to loosen some clamps all a road, then access like the glove without slack among a resonator and a normal tailpipe. If you are posing this in the cart buys a version of diameter of the interior the small plus. I think that that one measures an elder is feigned for trucks.
4 / 5
I have bought this tip for mine 2011 Subaru Impreza 2.5i and has been impressed with a look and surprisingly a difference of his remarkable in the mine exhausts... I have not expected a lot the change of his with only that attaches a tip, but take the small deeper and throatier.

IS by train of the give 4 stars so that have had to to take the sawzall and has cut two inches of mine exhausts tube to do returned without bond far out of a back end. I know a period is remarked, but has not known exactly which look on.

After doing an adjustment, the looks and the utmost sounds... I actuate Already recieved the greetings vary of 'these looks awesome in these automobiles' in some more passive 'thank you for not going overboard with to beat of coffee this clave out of a backside, and that sounds like your car careers in rices'
5 / 5
Some looks of product very good and is material fact of big quality. Difference of mark esthetically in my agreement in a normal muffler tips.
5 / 5
In the principle has bought this for my cart (small corolla) has not measured a tip but while it says universal. You are not the tight access so much at the end has posed the in my Hiace which there has been the thickness of plus exhausts the tube and he looked utmost. Any overpowering only the light perceivable growl when spends on he especially besides big RPM want to it.
4 / 5
They are beginning in discolor, but supposition that is to be has expected given a heat, etc. Was easy to return and looks very fresh!
5 / 5
These like acute looks have attached in my exhaust. Taken down 10 minutes to install mass. Further the attach the sake hum!
3 / 5
Any extra sound (vroom vroom) but the utmost looks.... The only problem is that it touches my bumper and will melt it.....!!!!!! The heat has attached resistant but still tape rattling..... It can take exhaust it (muffler) perch and try concealed.... But why.... resonates Not doing .... Necessity In rethink this... Any stock exhausts updates for my cart ....14 it Treats note....But you maintain to try.... I want to it burner of rice to arrive to this point....!!!!!
2 / 5
It IS it returned. Be of the reason does not change a sound of mine exhausts. Looked adds and easy to install. Tried the three different vehicles and he have not sounded any different in any one of them
5 / 5
Mina returned 2018 Silverado perfectly, good quality
5 / 5
A product looks very good and is material fact of big quality. Difference esthetically in my agreement in a stock muffler tips.
5 / 5
I mine dipped in the 2015 Silverado with the 5.7 engine of litre. I have had to that loosen a clamps all a way, then gone back like the glove without slack among a resonator and a stock tailpipe. If you are dipping this in the automobile buys a version of diameter of the smallest interior. I think that that a measure an elder is feigned for truck.
5 / 5
This was a perfect arrival for the 4corridor after taking the big flow muffler welded until a otherwise stock system. Without a resonated tip an exhausts tended to have the 'boomy dron' in the drop rpm light throttle place. This softened out of this something, has done a sound of interior less in general, but a better part is a sound 'polished' that is does now orchestrated with a Hooker Aerochamber muffler in an outside of a vehicle. It touches the small 'rough' on invaded with the odd 'bafft bafft bafft touched to go the, and now touches the perfectly balanced deep 'blab-blab-blab-blab-blab' except smooth and throaty with the little burble on invaded. I expect that it feels frames .
A Bad (-1 star) : Some rays to mount when maxed was to look pleasant to the equal that stick out of a pipe in a thumb. I am planning on it solders he until taking touched of of one odd looking ray on appearance.
4 / 5
Has bought this tip for mine 2011 Subaru Impreza and has been impressed with a look and surprisingly a difference of his remarkable in mine exhaust... I do not have very expected the transmission of the his with only that adds a tip, but take the little deeper and throatier.

Are by train of the give 4 stars because I have had to that take the sawzall and yard two thumbs of mine exhaust pipe for is it returned without sticking far out of a rear end. I know a period is remarked, but has known no exactly which look on.

After doing an adjustment, the looks and the sounds adds... Have Already recieved compliments varying of 'these looks awesome in these automobiles' to a passive plus 'give the graces for not going overboard with to beat of caffè that estacas out of a backside, and touching like your car careers in rices'
5 / 5
originally has bought this for my car (small corolla) has not measured a tip but to the equal that say universal. It was not the tight access taste finally dipped the in my Hiace which there has been the fat plus exhausts the pipe and he looked utmost. Any overpowering so only the light noticeable growl when of the a very on he especially besides big RPM want to it.
4 / 5
The work adds to dress on a stock exhausts tip in mine 2012 Mitsubishi Launch. It was also long to use a resonated the part but he have done any difference in his in my car, tried it. I slid the almost all a way behind to where a tip of mine exhausts fulfilled an end of a muffler aims it and he have very improved a look of the mine exhaust tip. I have taken the casualidad and has bought the scratch and dent special of Amazon, for $ 8 more economic, this in spite of among a container of factory. An only difference was a fund of a container there has been the light tear and has had the very light scuff mark in a fund of a muffler tip where the person will see it, as it was totally currency he.
5 / 5
Is beginning the discolor, but the suppositions concealed is to be has has expected given a heat, etc. Was easy to return and looks very fresh!
4 / 5
This product is incredibly easy to install, while you are able to regulate rays and presionándoles down the placing in your pipe of row. It LOOKS he adds! It returns to surprise and presiona down without wiggle, rattle or shakiness. It does not look or feel Almost like this economic like his prize. This in spite of, have bought this more for a sound that a look, as I have wanted to so only he throatier his out of my exhaust without spending hundreds in the new exhaust or at least muffler. Like this far, I have driven so only around a blockade and in general Street in city on 30mph max and honradamente can not listen any difference in a sound. Have Still for the take on a street, as so only can require listen he in of the main speeds and RPMs. Otherwise, Aesthetically, ossia a awesome buys the spruce on a look of any walk. If yours buying for his, would research another the one who has dipped this product in your particular vehicle. The mine is a 04 4.7 V8 Dodge Durango. To good sure recommend buy for looks!
5 / 5
Unless it was has had to that to cut some period of my pipe, has had to that jerry rig this to do do in mine SR5. An end of a SR5 is 2 3/4' wide and although you can slip in this extension in the, calm so only can do like this with only one of a washers in an interior. I literally installed this with the ray and washer. I have bought so only the stainless steel (as it do not rust) given of a same diameter, but a shorter could buy (as it does not stick out of obnoxiously), dipped the in a less visible side of an extension, and then used some Loctite Blue. There was on by means of a car wash and remained in just well. ALSO, I have loved a black version, but look in of the pictures some black starts quickly. Included is one , has pictures of him rusting. For like this, I sprayed some Rustoleum clear enamel in the for the protect. I think that that it goes to last the long time for me. I can periodically recoat the.
4 / 5
Has bought this for mine 1998 Mazda B3000 Pickup truck with backside of cat Flowmaster súper 40. Have has wanted the buy this before I have bought the weld on touch to see if in fact he the difference in sound. It was pleasantly surprised when he a tone the sound the deep plus, no the whole plot, so only enough to do touches appropriate if this felt. When it Comes to Vehicles of all the walks of life, yours exhaust is splits key of your personality of vehicles, these helps of product take some annoying sounds of the yours after the phase exhausts and sound to mark alot more pertinent. The short long history, Rays in Easy, the sound of small difference to the yours exhaust but enough to do the difference. If you can hide a 10mm rays that clamp in looks really cleaned. It suggest that it buy the weld on touch if yours in active hard core as you can take one the majority of out yours exhaust potential of tips for sound. But, if yours of the that knows like this to weld, of the that has of the money for the take to take welded, or simply so only love an easy car modification to improve your partorisca exhaust his ossia a product for you. And a last what, Mark sure your @harm some dimensions of this tip, calm of any one the ray in games that a same diameter of the yours exhaust or more he wont slips on. Triple control before shabby. I am speaking of experience.
4 / 5
That liked me is a fact they so only cost $ . My original passenger tailpipe the tip has been partorisca lose on done the year. I look for an original Toyota tailpipe tip and a row partorisca just that one was $ 89-$ 110. If this was some type of the functional piece would comprise but, has taken another was partorisca the inspect and so only there is not any one a lot his. Any ray and calm basically can him the attractive was with your hands. I have looked for the long time and has found finally these. It has seen a prize and imagined the one who a hell like bad could. Better that was-symmetry of balance in a backside in having them like this chosen up.
Was very surprised in like this substantial these were. They are fat very done and ensure closely with there of rays. A record extremly sure and no any sound. It is the different fashion and my another but, can win has 20 is and he 268 HP to engine likes reason no. A chrome works with some emphases in some automobiles as I will give them two thumbs up.
Partorisca A prize, absolutely is a better call.
5 / 5
The product adds my Toyota Highlander the look adds and hot
5 / 5
has dipped this in mine 2015 Silverado and looks stylish has done also the sound of the yours very wise
5 / 5
This looks like this acute attached to the mine exhausts. Taking down 10 minutes partorisca install too much. Further it adds the good hum!
4 / 5
Has done recently the muffler delete in 2000 cougar of mercury, and partorisca be very sincere... The bad sound. It has dipped in a rest of some pipes partorisca dip it has spent a backside, and touch better, but still eh... I have dipped this on and saint crap it has helped the fact the plot less “farty.” If you are looking for an economic tip partorisca the recent muffler delete ossia the election adds !

A pros:
•prime of Amazon ;)
•prize (more economic that zone of car)
•hex rays (the rays can undress quite easy in these)
•resonated
•a lot of room for adjustment
•simple to install

A gilipollas:
•is coming with some black residue, and shavings of metal still on he (assuming to manufacture)
•a ray can be difficult to achieve if any one the the bloated wrench.
•Does not look real stainless steel (would recommend to rust inhibitor partorisca north east folks).
4 / 5
Has struggled to install it reason some 3 rays with the flat dice would not leave it slide in. It can so only it uses a ray. I have drilled then in 2 self touching rays to fully ensure it to the mine tailpipe.
Has Had to cut of a big plus has developed bbn final of the mine tailpipe to start with.
Value a work because the look adds, (and matches my Chrome
sweep of nerve)!
4 / 5
Sound very extra (vroom vroom) but the look adds.... The only question is that it touches my bumper and will melt it.....!!!!!! The heat has added resistant tape but still take the exhaust (muffler) hanger and try concealed.... But reason.... resonates Not doing.... Need to rethink this... Any stock exhausts upgrades for my car ....14 it treats it it will maintain to try.... Master it burner of rice to arrive to this point....!!!!!
4 / 5
For a money, the quality is surprising, his easy to install, an only complaint has is that although he technically returned, does not seat flush with a bumper in mine 09civic ej. It can cut a pipe to row to do seat flush but prefers any to. Also it looks enormous when seen of a backside for the civic cup. I think it that it look better in the truck or the main car as to calm. For the small black car, this enormous polished exhausts is quell'has bitten obnoxious for my flavour. There is does not differentiate of his remarkable mine this in spite of. But im sure one measures it brightness of undoubtedly will draw unwanted attention of some police here in california which is reason I will return for something more suitable for the civic mine
5 / 5
Good touch to mine 2019 Silverado . It was easy to install but has used so only one of some 3 rays for slide he in a tailpipe. I have not loved to cut a tailpipe And is still flush with a bumper. A transmission of sound was noticeable for the little has bitten.
5 / 5
It can any gone bad partorisca a prize. But, I ordered it after reading the response in of the Questions and of the Responses has distributed of a costruttore. They said it that it return 1.5' and up. A one has received was paralización '. Any question, has substituted so only some 3 rays with slightly longer some and he well!

Again, fantastically manufactered and has to that weighed partorisca a prize. And yes, he sweet out of a tone in mine Opel Kadett. A baffling interior is well. Mina Kadett does not touch enough so as the car to sew like this do without him.

Purchases again!
5 / 5
Well looks for mine Tacoma 2019 SR5 but a sound almost very existent and the little has bitten hard to dip in reason a diameter is a lot stagnate for a truck. But global happy with a compraventa.
4 / 5
Perfecto for my truck.
Likes that return of mine 2014 Silverado 1500. Has has had to that so only use a ray because of a diameter.
The so that only did not like is that one of one sending to us had been used previously for more, in some outsides was impeccably cleaned but in an interior was sooty.
4 / 5
Is returned. Be of the reason does not change a sound of the mine exhaust. Looked adds and easy to install. Tried the on three different vehicles and he have not touched any different in any of them
4 / 5
WHOA the one who the difference! (Pictures to come). My old muffler the tip was ugly, small, and has had it trashy appeal. With this tip, volume that flashy-ness that I want to, is easy to install (not drilling required), is a lot of abordable, and gives my car the good sound. HIGHLY recommend!
4 / 5
Has loved a product arrive it, but no the week is spent of longitude before a clamps in an of a two I has has bought fracasado while it was in a street. It bounce it it was and this was an end of him.

Was very simple to install, it fantastic look in a backside of mine Mercurio and calm can not contest with a prize, but require to improve his control of quality.
5 / 5
Was skeptical but has thought, in $ , that has has taken to lose? I have required to take a flange out of a note of Tundra of mine Flowmaster dual exhausts system - and has had some strong droning 1800 RPM this was a lot of annoying. Well These few creatures have done so only concealed: refined a harshness and cut for behind a dron the little has bitten. They are very pleased that with such the small investment, could see these results.
5 / 5
Has required something to touch the rusty muffle I chopped behind. Easy to install and gives a car the very small touch. It does not remark the difference of noise likes some have declared. There it go it one for the few weeks now and looks sturdy like this far. I dipped it/ I dipped It on one 06 Mazda 3 S
5 / 5
A lot so only done this look of the unit well changes an exhausts note of mine 2020 GMC Canyon V6. It is throatier with an exhausts the installed tip. I love it.
4 / 5
The look adds in 2015 Toyota 4Corridor has Limited. (I still think it would have to that it has come with the tip of a factory/dealership.)
Has preferred a creation of round, in an oval of very other tips. If you can resupply a TRD or Toyota tip, goes for him. This in spite of, given this point for of prize an all stainless this was quality very big , thinks that is the accessory adds. I fill a niche in a skirt of bumper amiably - not touching , but full. It has had to touch with one situating the first bit of presionar some rays to take a better look.
4 / 5
It DOES not RETURN , the stock 2016 Nissan Embroider pro4x. My truck exhausts the tip is 3”, the desire has done these partorisca return 3” anchored and any to do jump until to 12” longitude 4.5” tip partorisca the diesel. It likes to see the 3” anchored to the 4” was like this one.
5 / 5
Really well partorisca a prize! The utmost looks. Sounds the few improvements that stock. Any one a lot although w is perfect strong reason exhausts bug of systems. J Right. The alike tips priced around $ 50-75 in 4 part of wheel. Place on 2018 Colorado n has had welded on as it do not fall off .
4 / 5
Has taken partorisca mine 07 Tacoma. Piping Of the truck was too big. So only using 2 of a clamps partorisca the ensure pipe. Looks Well!
4 / 5
Has saved the little bit and taken some units of turn of the warehouse. Any one the macula but that loses the piece of the smallest hardware, has had something manually concealed returns it. Because of which exited of pipe of a mufflers in mine CTS and his place, this clave out of a bumper enough the bit but looks quite good. Been due to groups he of metal has attached to a cup of an accident tailpipe, could not take all some rays have presionado in this side how is the little release. Although still chinese, can say these am very done and add the light purr to an exhausts sound.
4 / 5
After measuring, asking questions and research it still is not returned correctly. Some clips still go in a way when trying slide on. It wounds on taking them was and taking stainless self taping rays and has gone well to a tailpipe. It looks decent but has begun already see the little rust inner, Like this to the left is to go the one who hard time. If you have read anything roughly changes a sound of a no. Then again conceals is not reason has loved that.
5 / 5
My husband has purchased this element for his loved his muffler to be sweeter and is less state pleased with his cost.
5 / 5
I like a look. The installation has required to file down a three clamps that a rest of dice squared in. My main disappointment and the accident was my drop in fuel mileage. Of 18-19mpg city to 16mpg. Ossia Quite significant that takes.
4 / 5
Has dipped this in the 2016 Chevy Silverado. I have cut a tailpipe of the few thumbs behind to do it has spent a tip installed roughly still with a fender. Precise use the hand-held grinder or file to do a tailpipe perfectly smooth. It is the tight access but go in. I think that that it looks to add and a prize was a lot.
4 / 5
The addition adds to my truck. 2017 Colorado LT Taxi of Crew with 3” exhausts, BUT an access was A lot of tight. So much I stagnate that it can so only it uses 2 of some 3 rays but is more than sufficient. To good sure not going anywhere. It does not listen any a lot of the difference of his May concealed is not of entity partorisca me.
5 / 5
Substituting to the tassel exhausts tip that has rust blotch. May also law like the noise reducer. You update when installed.
4 / 5
Has not looked in boxes of element ready partorisca install. Found all 3 of some rays and the clips are missing. Such the disappointment and now has to that do the travesía partorisca return an element. It thanks gentlemen!
5 / 5
This produced are extremely Adds . I have ORDERED 2 PARTORISCA DUEL EXT PARTORISCA MINA 2013 MALIBU. IF it MEASURE WELL YOU WILL HAVE ANY LOOKS of the QUESTIONS & TOUCHES UTMOST ! It INSTALLS IN 15 MINS. It THANKS. R. BOYKIN
.
5 / 5
Adds exhausts tip. Doesnt Feels economic likes alot of one some was amazon . Shopping again when I convert a browser to dual exhausts. If a coronavirus doesnt kill me.
5 / 5
This has done mine 97 Civic much calmer and the looks adds. This has changed a tone of one 2.5” exhausts to the remarkable deeper growls. A lot very in general. Woukd Buys again.
4 / 5
Unfortunately in spite of the amazon that says access my vehicle. He no. Any access 2016 Ram 1500 tradesman. It does not trust an amazon returns your vehicle. Measure attentively
5 / 5
looks well, and looks partorisca be very built, but is much bigger that some pictures suggest, as I am returned he without the install.
4 / 5
Well, he no, but look 100 better times that a stock some. Has 2 of them on the Ford Evasione and panted his with painting of black heat. The looks mean now behind

Top Customer Reviews: Exhaust-Mate 35794 ...

Rating: 4 out of 5 with 30 ratings
3 / 5
Owe heavy sake. Bought 2. One has had all a hardware and was complete, another has been missing some nuts. The amazon was very enough to ship out of the substitution asap, but the control of quality could use some improvement. These do a work to ensure exhausts to canal and has has not had any subjects so far.
3 / 5
VERY robust. Easily compress it a tube for the solid joint. MAYS.. It is missing the NUTS.. Felizmente Was able in salvage the functional but rusty nuts of one of some old clamps..
5 / 5
I have bought a 4 version of inch of the same an also. Very good and beefy. Almost on build it. You tin to good sure crank he down so hard as to want to and any one the preoccupy or bit. It buys this to exhaust clamps, any cheap was.
5 / 5
Some clamps is coming while it expect. They return and look in this time to be of good quality.
3 / 5
One of some three clamps and has purchased has had only a hole in him for one Or ray. Drilled the hole and some looks of clamps to do well.
3 / 5
Received two 3 inch clamps today . In onening boxs to verify the clamps has remarked one of some clamps has not contained any nuts.
A clamp the box has been closed and has recorded closes so some nuts has not been lost to ship.
HAS another clamps in my garage to use nuts of so of problem very real. Only the problem in of the controls of quality .
Otherwise The clamps IS cual required for muffler in my Ram 1500.
1 / 5
Complete rubbishes...... Correct part but exhaust mark of partner..... The nuts undressed tensed with the wrench of combination.
5 / 5
I have ordered four partorisca the project. Some boxes are packaged come - to avert - to the long of a side. I have ordered four. His all arrived in the brown mailing stock exchange that has not gone entirely sealed, as when one of a clamp the boxes have come averts, one of some dice has escaped. OF THE THAT JUST TAPE The FINI OF THE BOX, HE DOESNT SOLVE The QUESTION. TAPE I SIDES ALSO.

Regarding a clamps his, is the abonos and sturdy, and use the 3/8' diameter or-ray, and flanged dice to the equal that has expected.
5 / 5
I edges undressed in a leg that use so only the ratcheting English tones! So only begun to snug the down and has been dried was. With which conceal, a die a lot behind was so that it is the good thing an or-the ray is like this flimsy. It was able to bend it enough to pull it was a pipe with my hands of the gloves and I are not known for my physical people! Walker the quite decent clamp. And, I think that that they are done right here, in some the EUA.
5 / 5
These clamps is that one some agree of some pasts that in fact can be presionado really good and never snap or pause. (Often and strong) A coating and the metal resist corrosion a lot well. Better clamp rid my door for roughly 2 and the half bucks each one that that. Recommended without the doubt.
4 / 5
That can say, has required the 3' clamp and ossia that is to go in a topmast . A prize is ridiculous. Or Esily and Napa has wanted to $ 15 for a clamp. I have ordered 2 (a to have manually) and was the still way more economic that a prize of 1 in these places.
5 / 5
Be a less expensive muffler clamp but will do a work. Investigation be done so only like another expensive plus clamps.
5 / 5
Produced excellent that one has been machined perfectly. The service done of the commission is cups , and the police of turn is awesome.
5 / 5
Has bought a 4 version of thumb of of the east some hips. Very good and beefy. Almost there is it on build. You tin to good sure crank he down like this hard as to want to and any to concern a bit. Spent this to exhaust clamps, any economic was.
4 / 5
Has had so only this installed with the new exhaust - like this far are adds.

Will update if these transmissions.
5 / 5
This 3” clamp access 3” I.D. Cat, muffler, etc.
I material looks to be quite heavy. A saddle is different while it is aimed on-line. See my pic.
5 / 5
Has that has weighed well. Bought 2. One has had all a hardware and was complete, another has been missing some dice. The amazon was a lot enough to ship out of the substitution asap, but the control of quality could use some improvement. These do a work to ensure exhausts to pipe and has not had any subjects like this far.
5 / 5
Fact perfectly, has used these partorisca prevent leaving in 2' estaca!
4 / 5
That is supposes to. More economic that is in some tents.
5 / 5
Way less expensive of another clamps and do like this has to that.
4 / 5
The husband has said that this has done adds partorisca his project. Any complaint.
5 / 5
A clamps is coming as it has expected. They return and look this time partorisca be of good quality.
5 / 5
Has received two 3 thumb clamps today . The onening boxs partorisca verify clamps there is remarked one of a clamps has not contained any dice.
A clamp the box has been closed and taped has concluded likes some dice have not been lost partorisca ship.
Has another clamps in my cochera partorisca use dice of as any real question. So only the question in control of quality .
Otherwise clamps Is that I have required partorisca muffler in mine Ram 1500.
4 / 5
The element has received quickly, the typical creation but the quality looks for partorisca be appropriate. Installed on 3' pipe with zero subject.
4 / 5
Complete rubbishes...... Part corrected but exhaust mark of mate..... The edges undressed presionados with the wrench of combination.
4 / 5
Has treated as it has expected... The quality clamp has built out of heavy gauge metal and a lot machined rays!
4 / 5
Losing some dice. I have ordered 3 pieces and 2 has been missing some dice
5 / 5
A lot of sturdy. It has it compresses easily a pipe partorisca the solid joint. MAY.. It is missing the DIE.. Felizmente Was able to salvage the functional but rusty given of one of an old clamps..
5 / 5
One of a three clamps has purchased them has had so only a hole in him partorisca one Or ray. Drilled pierce it and a clamps looks partorisca do well.
4 / 5
Has arrived with only a die. Doing this conpletely useless

Top Customer Reviews: DC Sports EX-1012B ...

Rating: 4 out of 5 with 49 ratings
5 / 5
The product is awesome. I access my oval 2 1/tube 4 perfectly. Real tight. A++++

2006 Scion xB the stock exhausts

UPDATE - 4/24/2018
Has to buy the nine a, after 2 years, the mine has been rusted, and after any one finished me to him behind, was attached still, but loose. The time of winter has destroyed a painting in a underside, and oxide-melted some rays. Taken an old a apresamiento, new one poses on, looks an original has done.

For 0 , he 2 lifespan of year, lived through the little take NY winters, and taking it back arrivals in 35MPH and that remains semi-detached, That is to say a lot of values a money for the re-purchase

STILL knows need the car wash. It do not judge Me .
5 / 5
So far so good. Installed today in 2016 Ford F150. Some access of perfect tips, in fact had of the law on. It was preoccupied that bolting his on has not been sure quite be, but is very sure. I have cut behind quite 3' in the each side to maintain some tips of protruding is spent a bed. Has dual exhausts flowmasters with 2' tubes. I am not the mechanic and usually turns the low project in the project of entity. The installation was very mere and very sure. I began it up and it have not remarked any difference in sounding until I am trace a gas. Has one he crackles that it can listen calm in the Nascar vehicle. I am very impressed so far. Amur A look of road and sound. It recommends, the prize was excellent and shipping fast.
5 / 5
Has the powder he coated arrival, sudden material , thickness, and a product aims the good quality. It IS black fund and no shiny. He bolted well in mine 2' the tube exhausts with some slack. I create it return it perfectly and stagnate in 2.25' tube.
With this class to finish, immediately annul my plan in weld the in my tube.
I weld the point around one exhausts the circumference of the tube instead and install the rays of a tip in front of a grandson to prevent he to slip.
4 / 5
Mina returned 2018 toyota tacoma trd perfect. The utmost looks with all a black in my truck. I have verified all some tents of cart of entity of parts and some prizes for this tip was $ 30 in $ 35. So that is to say a awesome roads
5 / 5
Piece of art
the Good tip those filters the bad noise that softens a sound
Cheap prize
5 / 5
So far also, it take less than 5 minutes for the install. Read the plot of people tac weld he in the place but I personally do not think very all concealed. The utmost looks, but do the tight access in a plastic of my Ford Directs hatchback as it is expecting does not melt /clear in of the stock exchanges. Update with time.
5 / 5
CE EXH. The TIP IS AWESOME!!! Has LOOKED FOR WEEKS to FIND Or And HONESTLY I DIDNT WANTS TO SPEND $ 75-$ 100 in or.
Has TAKEN THIS OF LOW $ 30 And the UTMOST accesses, the UTMOST looks And The SOUND IS PERFECTO, NO TOO STRONG. RETURN PERFECTLY, the FACT HAS TO HAVE MY LOW TUBE WAS QUITE 3 EXCEPTS EXPECTED THAT. HAS One 1990 Mazda Miata. The FLIGHT!
5 / 5
The on-line information is bad. It declares access 2 1/4 in 3 and only access until 2 inches.
1 / 5
Any bad, has to to good sure tack weld these on even so. The mine has begun to take loose after 24 hours. Screwing The angle of rays down some pieces of metal. These only flavours that will lose you to him these over time if you very tack weld the on. If you do not plan in welding the, then does not recommend this model. The fact adds with mine 1 7/8' tube. This was an only DC tube of sports in this way that apt the.
4 / 5
Like this far like this well, it has taken 5 minutes less partorisca the install. I have read the plot of people tac weld he in the place but I personally do not think a lot of all concealed. The utmost looks, but do the tight access in a plastic of mine Ford Sposa hatchback so much are while no light /funds on fire. You update with time.
4 / 5
An on-line information is bad. It declares access 2 1/4 to 3 and only access until 2 thumbs.
5 / 5
Has read some other descriptions in this element that says it ray in the 2017 Tacoma, but when I have received an element and has been partorisca the dipped on, a tip of mine exhausts was big that an element. I am not sure it have the mixup of some class but I has been disturbed that it was unable of the install.
4 / 5
awesome! Better that a OEM deep the pilot exhausts tip. East exhausts the tip gives partorisca exhaust the low deep hum sound.
5 / 5
Has bought this for the 2019 Toyota Tacoma has Limited. I have had to that cut of a section has developed to exhaust in a truck and slip this tip in a pipe without a clamps resupplied of the contingent. A tent of local car welded he for me. The utmost looks that estaca out of just for behind a right rear wheel and is resisting on well. Still it looks new.
5 / 5
I hate to leave to 1 description of star for anything but this said it would find 4corridor 5th Gene. It neglects to inform you that if your muffler has any type of the twist no . Please verify your pipe to do sure calm will have to that cut the a muffler to leave this to slip on.
5 / 5
Any bad, is due to good sure tack weld these on this in spite of. The mine has begun to take free with which 24 hours. Screwing I rays down bends some pieces of metal. This so only tries that you will lose these over time yes calm no tack weld his on. If it do not plan in his welding, then does not recommend this model. The fact adds with mine 1 7/8' tubing. This was an only DC pipe of sport in this way that apt the.
4 / 5
The look adds in mine new 2019 Toyota Tacoma. Parties perfectly with my Tyger Bars of At all. Well the fact and The Look add. Very easy to install. It recommends spraying the bit of spray of corrosion in some rays to protect to rust.
5 / 5
Does not return in 2014 JK Jeep Wrangler to the equal that has announced. Envoy behind for repayment.
4 / 5
This is not mine returned 05 44corridor Deports so it has given was. Looked has been done well. It installs looked quite easy, he clamps on. It was surer with edge locker or tack weld.
4 / 5
The piece adds for my car but class of calm, was specting the little noise but the look adds.
A star less reason some pieces of hardware that fixed to a scape tube whose retract all teh the ant of way has left the empty among scape and tip
4 / 5
the title dictate it, he doesnt returned a 4corridor exhausts tip. It looks well.
5 / 5
Could not decide yes chrome or black but now looking the looks adds in blacks
4 / 5
really gives one 71 BUG of DECREASE the new sound ,bosses of Torres while the people try and figure out of that is coming !
5 / 5
A description has stirs it of mark and models that is supposition to return but he didnt apt mine.
4 / 5
The element arrives 2 nave of the turn of day adds in mine walker muffler can not complain the extra security added for welding the to a muffler besides using some rays avenges with.
5 / 5
The works like the charm give my car the good look and final of row and sounds like the purrr
5 / 5
More pertinent like the weld on, has lost an earring the likely longitude a weight and continous vibration that loosen he still with loctite.
5 / 5
This tip has on resisted and in fact gives it the noise the deep plus to good sure values of the money and recommends them buy
5 / 5
Like this far like this good. Installed today on 2016 Ford F150. Some tips return perfect, has to the fact has had to that do on. I have been concerned that bolting his on has not been partorisca be quite sure, but is very sure. I have behind cut roughly 3' in the each side to maintain some tips of protruding has spent a bed. Has dual exhausts flowmasters with 2' pipes. They are not the mechanic and usually turn the short project to the project of entity. The installation was very simple and very sure. I began it up and it have not remarked any difference in touching until they are trace a gas . There is a crackle that could listen you in the Nascar vehicle. They are very impressed like this far. Amur A look of way and sound. You recommend, the prize was excellent and shipping fast.
5 / 5
Is returned mine 2018 toyota tacoma trd perfect. The utmost looks with all a black in my truck. I have verified all a car of entity tends of part and some prizes for this tip was $ 30 to $ 35. Like this ossia a awesome extracted
4 / 5
the product is awesome. I access my oval 2 1/4th pipe perfectly. Real tight. A++++

2006 Scion xB the stock exhausts

UPDATE - 4/24/2018
has Had to buy the new a, with which 2 years, the mine has been rusted, and after any backside finalised, was attached still, but free. The time of winter has destroyed a product in a underside, and rust-has melted some rays. Taken an old one has takes, new one dips on, looks an original has done.

For $40 , he 2 year lifespan, lived by means of the little hard NY winters, and taking it arrived of backside in 35MPH and that remains semi-detached, Ossia a lot of value of the money for the king-buy

knows need the washed car. Not To Judge me .
5 / 5
Has tried to locate a mine of tip 2016 TRD M-5 Tacoma. I have cut an end of mine exhausts was where he Extruded the thumbs. It can not take a tip in a now 2.5 thumb, or as it exhausts final with a hardware resupplied. I have finalised trashing a hardware, and has finalised to cut 3 2.5' run slender in an anchored and has used two stainless steel pipe clamps to really crank down and express an anchored of the tip in mine exhausts pipe. It is not going anywhere. They are happy with as the product has finalised to return. It is a lot of flush with a pipe of row (any empty of air,) and matches my black truck. To good sure can listen the transmission of the yours light around 2-4 thousand RPMs. A lot satisfying, and cockroach of cosmetic modification. It does not return properly at the beginning because they are for the buy in the first place, thinks client later. Mark sure knows your dimensions, or taste ;)
4 / 5
has the powder coated arrival, rugged material , thickness, and a product aims the good quality. It is it walks black and no shiny. He bolted well in mine 2' the pipe exhausts with some slack. I create it gone back perfectly and stagnate on ' pipe.
With this class to finalise, immediately annuls my plan to weld the my pipe.
I weld the coverage around an exhausts the circumference of the pipe instead and install the rays of a first tip of a coverage to prevent he to slip.
4 / 5
Has this in my House with the magnaflow. His, noise, and crackle all sounds to surprise! The looks add in my opinion!
5 / 5
Piece of art
the Good tip that filter the bad noise that softens a sound
Economic prize
5 / 5
has had to cut my exhaust pipe in the foot the short plus of the maintain out of new aftermarket shock and suspension upgrades in my Jeep TJ. This uncle was an excellent access and with some rays of fixation some easy installs. I sanded and welded the to prevent he to fall off while paste hard trails and bunps in a street and looks sum hiding for behind a suspension under my Jeep. Looks Really well so that the look in quite firm for the see and take the plot of compliments on that. I have expected reviews the to see that a lot one paints has on resisted with which some use and looks like this of at all has been affected at all with which roughly 1000 miles that career by means of him. I produce it adds for the prize adds! Highly recommend love the hard looking tip.
5 / 5
EXH. The TIP Is AWESOME!!! Has has LOOKED FOR WEEKS to FIND ONE And HONRADAMENTE I DIDNT WANTS TO SPEND $ 75-$ 100 on one.
Has TAKEN THIS PARTORISCA LOW $ 30 And the RETURNS ADDS, the LOOKS ADD And The SOUND Is PERFECTO , NO TOO STRONG. TURN PERFECTLY, HAS TO HAVE MY SHORT PIPE WAS ROUGHLY 3 “ BUT has EXPECTED THAT. HAS One 1990 Mazda Miata. You LOVE it!
5 / 5
Fantastically Do. So only it is not returned my R55 Clubman S.
4 / 5
Love this product. Easy to dip on and a lot something concealed the estacas was like the plot of muffler the extensions do.
5 / 5
This was partorisca be the slip on, but is not returned at all. It is returned, because he no returned.
4 / 5
Element wouldnt is returned mine 2016 Tacoma, one returning is too small to attach, looks the good tip if it was a right measure
4 / 5
the look adds in 2004 Trailblazer, gives the real aggressive look to my truck. I produce it adds! MODIFICATION//: beginning partorisca take some surface rusts, yes live in a zone where rusts is possible, the expect take the little bit of a salt after the snowstorm.
5 / 5
Layer of black powder a lot that would be necessary to resist it on well. Required the new muffler so it has had a tent weld he on. Amur A noise!
5 / 5
Looks fresh. It gives my Civic the little growl and easy to install.
5 / 5
It looks and it touches it adds! I have had to that this in spite of cut a pre-existing exhausts tip and weld a new one to plant.
4 / 5
Has bought this for my f150. I have ordered this in spite of a measure of anchored bad for my truck. I modified it to return. This has not been one the fault of any but I. This has said that it is solid and well has built. I plan on that buys a correct measure later.
5 / 5
I looks is of quality of descent. The question is that it does not return to to my expedition likes has said. Like this here it is.
4 / 5
The look adds. Some group that has come he with him has not left a tip to return in mine exhausts partorisca have to that way that has had to that weld the. It looks to add
5 / 5
Segundo a have bought. Dipped an on 2005 Scion xB and this an on 2013 Deep Civic LX. I produce it adds. Súper Simple installs. Bite tinier that throat added. Nizza Clean simple has impressed

Top Customer Reviews: Dynomax Race Bullet ...

Rating: 4 out of 5 with 60 ratings
5 / 5
If you want to attach 57 it try it horsepower in some back wheels, that is to say a muffler since you. It enciphers the totally designs that he a lot the fact some happy neighbours to listen when has work in 6 is. A second begins in your cart or truck with this muffler installed, he instantly unleashes 3 bald eagles and turns your red to paint, aim, and blue. If very want to you nettle some hippies in the Prius, that is to say a right election . 10 Out of 10 funds he again
5 / 5
2016 Dodge Uploads 392/6.4/SRT: This cart is bad now. 50 $ dollars more spent in my cart. If any one be able of the install to you, one exhausts the tent will touch you around $ 150-$ 200 for a habit installs ( will have to attach some tube). NOTE: in a 392/6.4/SRT Dodge Challenger/Load, can pose a road grupal of the tone in DEFAULT in your neighbourhood and a cart would not have to offend your neighbours. It poses a cart in YOUR or road of the sport and he result the beast because of a big plus RPMs and turn outs. Has the resonator deletes and a AES simulator setup (takes active to exhaust like the stay of valves opens all a time) like the cart is substantially stronger that normal to begin before these mufflers was installed included. As that directs in DEFAULT is the must for my cart goes to do in 530IS. The decree that reads some descriptions and ATTACH To the cart will not listen .
5 / 5
I have deleted a mids in mine 2017 Daytona 392 and installed some mini balloons of race in place of a mids sounds to surprise. To listen my control of clips of the sound out of my Instagram NJMOPAR
5 / 5
Installed in 2017 load scatpack 6.4l. The easy utmost sounds install. 100% reccomend. If you are debating, he. It Beginning the strong cold plus. It goes them deeper, crusies in a same any drone. Wide open throttle, oh mine!
5 / 5
I have purchased this muffler like the resonator to minimise a 'drone' has taken well in 1900-2100rpms with my recently installed Cat Behind exhausts system. A system was in the Dodge 2004 Ram 1500 with a Hemi automotive. These engines are fulfilled by some 'drone' with the insurances exhaust systems, the mine has not gone also bad excepts in this very narrow field. It does not except when being too intrusive selected this muffler because of a measure and this could cut one that exists 3' tube of row and slide he on, then slide a 90 beginning of tube of title in a muffler, installs two clamps and the be has done. It remarks that this part is 3' Enter an entrance and 3' OD in a beginning (finishes lower). It can not be happier with a result of final, a drone has gone totally, but one exhausts the deep still sounds and sweet.
5 / 5
I have tried some a lot of different things before finding this product and he are a plus so far. I have tried flowmaster mufflers muffler delete and gave me at all that some V8 yours without any drone minus a dynomax. The cheapest solution in his add and highly recommended in my opinion.
5 / 5
Nice exhausts the key update in Scat Group Challenger 6.4l, he beginning the strong cold plus in a tone of 4 bald eagles, in goes his strong plus then normal out of a vehicle, normal behaviour slightly the tone the deep plus then normal but no in much stronger then normal, wide open throttle 6 shouting bald eagles. It installs you are $ 100 therefore welded in in the venue exhausts tent. It Likes him his no so raspy so of the people that mark mid muffler deletes in these carts, these attach the good tone in the good prize.
5 / 5
Bought this to substitute a mid mufflers in the challenger hellcat. Simply a compraventa exceptional. A sound is exactly that has looked for. Yes stronger (the most car race strong) but any limited muffler raspiness. Highly recommend it this pose above that spending $ 1,700+ in an on priced mark. It maintains to import some works of normal tube are already excellently designed and a resonator (behind some tips of finals) is of excellent drawing a mid muffler substitution of substitution with this mini the balloons are some tones to do a symphony of engine comes of the lives.
5 / 5
Only I these had installed in mine 2018 Dodge Uploads R/T Daytona.

Those of you concealed has the Dodge Uploads newer V8 fulfil you already has the add to sound cart of the muscle with a factory exhausts system. These mufflers takes that his and crank a volume until 11. Of a moment I revved an engine in when punch a throttle wide open in a road, has known had done a right election. I have wanted a sound my cart has done before, and absolutely wants to one issues some car sounds now and has 0 remorses that has these situates on.

Can try describes a difference of his, would say one goes is the slightly grave more tones, cries in WOT, and a rev in the park is So more than satisfies (and concealed is saying the plot that considers what stock of sounds of bones). It IS a mark of his still before, but stronger. Besides, now it listens some crackling/gurgling when I downshift subjects of sport that is the good thing. There is not a lot drone that any one already exists, and one of some characteristic better is that he still the low sake when engages road of normal behaviour. Easily it can line the conversation with the passenger, listens in musician and habladura in a telephone without a sound of your automobile when being the problem.

TL;Dr.

STRONG! AWESOME! Any drone. Taking the, no very remorses.
5 / 5
Installed these in place of a mid mufflers in mine 2017 Load Scat the group and he sound awesome! It gives the very good tone without the roads adds of rasp and any drone. For a prize, these can not be has beaten!
4 / 5
If you want to add 57 it try horsepower to some rear wheels, ossia a muffler partorisca you. It enciphers the entirely draws that he really done some happy neighbours partorisca listen when have work in 6 are. A second begin on your automobile or truck with this muffler installed, he instantly unleashes 3 bald eagles and turns your red to paint, aim, and blue. If calm really wants to nettle some hippies in the Prius, ossia a right election . 10 Out of 10 paths he again
5 / 5
2016 Dodge Uploads 392/6.4/SRT: This car is bad now. 50 $ dollars more I never spent in my car. If any one calm can the to you installs, an exhausts the tent will touch you around $ 150-$ 200 for a habit installs ( will have to that add some pipe). NOTE: in a 392/6.4/SRT Dodge Challenger/Load, can dip a way of band of the clue the INCUMPLIMIENTO in your neighbourhood and some transports would not owe that offend your neighbours. Dipped a car in CLUE or way of SPORT and results the beast been due to a big plus RPMs and turn outs. Has the resonator deletes and a AES simulator setup (takes active to exhaust like the stay of valves opens all a time) as car is substantially stronger that normal to begin first of these mufflers was installed included. As driving in INCUMPLIMIENTO is the must for my car in disposal to do in 530FOLLOWS. The stop that reads some descriptions and ADD To the CALM CART will not feel .
4 / 5
Has deleted a mids in mine 2017 Daytona 392 and installed some mini balls of race in place of a mids sounds to surprise. To listen my control of clips of the sound out of my Instagram NJMOPAR
5 / 5
has tried some a lot of first different things to find this product and he is a plus like this far. I have tried flowmaster mufflers muffler delete and at all have to me then some V8 yours without any dron minus a dynomax. The most economic solution to his add and highly recommended in my opinion.
5 / 5
Has purchased this muffler like the resonator to minimise a 'dron' has taken well in 1900-2100rpms with my recently installed Cat Behind exhausts system. A system was in 2004 Dodge Ram 1500 with a Hemi engine. These engines are known for some 'dron' with the insurances exhaust systems, the mine has not gone too bad excepts in this very tightened row. Any that wants to be too intrusive has selected this muffler because of a measure and that could cut one that exists 3' pipe of row and slide he on, then slide a 90 start of pipe of terracing in a muffler, installs two clamps and be fact. It remarks that this part is 3' Go in an entrance and 3' OD in a start (final shorter). It can not be happier with a result of final, a dron has gone entirely, but an exhausts still touches deep and sweet.
4 / 5
Installed 2017 load scatpack . The easy utmost sounds installs. 100 reccomend. If you are debating, he. The cold starts stronger. It go him deeper, crusies in a same no dron. Wide open throttle, oh mine!
5 / 5
Well Exhausts your upgrade in Scat Band Challenger , the cold that begins stronger to a tone of 4 bald eagles, go his strong plus then stock out of a vehicle, normal behaviour slightly the tone the deep plus then stock but any to much stronger then stock, wide open throttle 6 shouting bald eagles. It installs it was $ 100 for both welded in in the venue exhausts tent. It likes his no like this raspy like this of the people that do mid muffler delete in these cars, these add the good tone in the good prize.
5 / 5
Has bought this to substitute a mid mufflers in the challenger hellcat. Simply a compraventa exceptional. A sound is exactly that has looked for. Yes stronger (the car race stronger) but a lot chambered muffler raspiness. Highly you recommend that this dips on that spending $ 1,700+ in an on priced mark. It maintains to import some works to pipe accionaría is already excellently drawn and a resonator (behind some tips of finals) is of excellent drawing a mid muffler substitution of substitution with this mini the balls is some tones to do a symphony of the engine that comes alive.
4 / 5
Has had so only this installed in 2018 Dodge Upload R/T Daytona.

Those of you the one who has the new plus Dodge Upload V8 know you already have add it touching car of the muscle with a factory exhausts system. These mufflers takes that his and crank a volume until 11. Of a moment I revved an engine to when have paste a throttle wide open in a street, has known had done a right election. I have loved a sound my car has done before, and absolutely love a way some car sounds now and have 0 remorses having these places on.

Can try describe a difference of his, would say one goes him is the tone slightly lower, cries in WOT, and a rev in the park is Like this more than satisfies (and concealed is saying the plot that considers that stock of sounds of bone). It is a same sound do first, but stronger. Besides, now it listens some crackling/gurgling when I downshift in way of sport that is the good thing. There is no dron concealed a lot already exists, and one of some characteristic better is that the quiets a lot down when you involve way of normal behaviour. Calm easily can resist the conversation with the passenger, listens the music and habladuría in a telephone without a sound of your automobile when being the question.

TL;Dr.

STRONG! AWESOME! Any dron. It takes him, calm will not have any remorses.
5 / 5
I installed these in mine 2017 Dodge Upload RT this comes stock with active exhausts. One of a prime minister mods has done when I have purchased initially one transports 3 month ago was a mid muffler delete and has maintained some stock resonators. Has think that touched to astound. Chico of boy of the boy... This in spite of afterwards install these dynomax mufflers this thing blew literally was a water. I have substituted my resonators with these mufflers. Sounds like the car of true American muscle. If yours that looks for to imagine out of that street to go I terms of the yours ehuast. It looks no further reason these puppies his awesome. All the world-wide and his mamma has tried run me on a way for behind a muffler tent lol and very there is no to run them ... haha... I say that these things are surprising? Lol
5 / 5
Place in mine 2017 Scat Sells Challenger Shaker now touches partorisca surprise more than the aggressive tone deeper

UPDATE FEB 9 2020
has been having these Mufflers roughly. 3 years now In mine Challenger Scat Bandage 392 still sounds that has surprised. Included better with resonator. It deletes Now my woman Uploads RT 2018. 5.7 hemi has TAKEN ALSO thesis Muffler and sounds so only that surprised with these balls of the race and the resonator delete.
4 / 5
Installed these in place of a mid mufflers in mine 2017 Load Scat the band and sounds awesome! It gives the very good tone without treating adds of rasp and any dron. Partorisca A prize, these can not be has beaten!
5 / 5
First of all, would like me thank all the world-wide the one who has answered everything of my questions and concerns pertaining to do my modification in mine 2016 Dodge Load Scat Band. I have taken my car in today partorisca take it done and a tent was excellent in his work. These balls have spent more roared my daughter and I have asked included a welder partorisca paint all welds with a product of big heat partorisca the protect. As you can see, a welder has had to that add pipes to extend like this of the balls were too many short. But, in general I am happy with some results. Still it owe his deep but even more strong his and ossia exactly to the that has wanted to him like the result.
4 / 5
So only installed this in mine 2019 Trackhawk. First to use this ball mufflers has deleted so only a “chance” muffler and directly-the piped. It was too strong, and too raspy! After seeing some recommendations for this element have decided to give has shot it to him.

• Is quite small and will return so only in any car and place up without part of paste of your car.
• Maintains to import that these have 3” day outlets. In my chance has 2.5” day exhausts. A tent was able to weld his on without the question.
• In the stairs of 1 to 10, directly piped a sound was the 10 . With these balls on would say that they are now one 8.
• A big difference this in spite of is with a raspy and a bit crappy sound to go with just straight pipes. Adding these balls have done certainly my truck touches more like my stock exhausts, but certainly has the difference in quality of his (will not touch like this as well as your stock is looking to indistinto that with something of a same, so only stronger). For a money this in spite of, really calm can any gone bad with these balls.
5 / 5
Has dipped these in mine 2013 Mustang gt with out street h the pipe and that the resonator deletes and Roush orients behind. A car was extremely he likes it strong there is wanted but loved it still maintain soothe down. Accelerating Around 2k rpm has had the strong unwanted noise. A cold start was also súper strong. With which has dipped these in him exactly that there is wanted. It leaves it down and it has done the smoothest sound d down light acceleration and has taken rid of an unwanted noise. Also you leave down a cold start to has been is so only the little stronger that a tassel atak has had on. But this any soothe an exhausts on big. An exhausts is still extremely strong when I Rev the up. Im Like this happy with him.
5 / 5
Does not take Me bad, loves strong pipes. But, I have had already he Magnaflow muffler installed. I have had a resonator of the factory takes and this installed because of the love the little stronger. It is too strong and now has to that dip another resonator in a tailpipe to try and quieten he down. Also it has some resonance/of vibration that a resonator of factory has cured of. I/m the giving 4 stars been due to value, construction of stainless steel, quality. But so only too strong. It can be better was directly out of one rear. Has the Ram GRAZED with the side exhausts. It resembles now to echo under a fender.
5 / 5
So only installed these in mine 2019 Challenger Scat Band. If yours debating taking these - gives a not debating and take these. That a awesome prize to do the enormous difference in a sound of your vehicle. Any included loves exited of the mine car now - been looking for all a overpasses to go down to listen the one who awesome is. My venue muffler the installed tent these for 120 dollars and has bought two these Dynomax balls. For around 160 I has an amazing touching exhausts without dron. Calm believe you will not be disappointed.
5 / 5
I installed 2 Dynomax Balls to Run that substitutes a mid mufflers in mine 2016 Dodge Challenger R/T . A product is very a lot of crafted. A car has touched well originally in big speeds but been missing of in sound in of the low speeds. With which installation, startup has touched fantastic. Some balls of race offer the basses, deep, classical american muscle his car at all times. Down RPM and go them, a sound is surprising. It touches even better in full throttle. Ossia The fantastic election for any one looking for something concealed the fantastic sounds, but is not obnoxiously strong. There is no dron in cruising speed, and in my opinion ossia the way negotiates better that spending thousands of the dollars in an exhaust box, like some balls of race will do a bit was, possibly even more. Fantastic product, very happy.
4 / 5
Has bought recently the beautiful Load Scat Packs the few months done. A stock exhausts honradamente surprised and loved it to plot but goes has felt likes was quite calm in general. With which a lot research has been rasgado among the mid muffler delete, or that substitutes a mid mufflers for these. Mid muffler Can be a lot of raspy and in my opinion does not touch a better but these are just right! Mina startups is very aggressive (warm starts was) and engine revs is absolutely insane... If of the yours 392 some gas with these things on you def left another knows is coming... Very happy with cost of mine and really recommends to try these was in the first place first of calm entirely delete your mids.. Sounds like this well my telephone of short dam was on some of a revs reason was that powerful!
5 / 5
Has had this installed by the local tent partorisca in $ 150 bucks. It has dipped these in place of a mid-mufflers and has maintained some resonators in mine 2018 Challenger RT. I am satisfied entirely with them. There is zero dron in of the speeds of street and is so only the little has bitten deeper and stronger that touch that a stock active system when driving usually in way of Sport. But paste a throttle wide open and suddenly bark and snarl a way any value of car type his salts would fall enamoured with. Really they are some better of both worlds and I could not be satisfied more with a total prize with installing and function. It have planned in that paid 2k for a aftermarket exhausts, like this very happy that I stumbled by means of these for advanced.
4 / 5
It has done the mid-muffler deletes and installed these in mine 2016 Dodge Challenger Scat Band Shaker. Parts and installation......$ 150.
150 $ more has has not spent never!!!
These have done the utmost touching the BETTER car sound. Deep growls, a lot gurgling, and that explodes when exiting a throttle, the entertainment adds when going under the viaduct. LOL
Touches quite calm for regular behaviour, but the look was when I of the a step!
These things speak on BIG TIME!

Tries these BEFORE it install your expensive Tassel or Run exhaust system.
Thinks that to calm will like him, and yes of calm a lot still can go another way.
4 / 5
That can say? They are besides strong likes has loved, further has built well. Well of his in mine 2006 Magnum R/T, has had him also in mine 83 K20 and loved them on that also. If it wants near the straight pipe for economic and still able to have rear pressure these mufflers is for you!
5 / 5
Dipped in 2012 Wrangler unlimited in place of resonator of factory. The fantastic sounds. Utmost build. It looks a lot of sturdy. Downfall Has been has ordered 2.5” in and was and has received the 3”. As it has had to go a tent of part and buy adapters that cost another $ 10. Another that that very happy with him
5 / 5
has purchased these for mine 19 Load SP based in forums and Youtube. They touch very better on-line like any have to him legustado he in WOT. Any the import when being strong, but did not think it has touched clean. It was not it was rasp or that but has decided to change to Dynomax 24248 and is very better. I will give it 4 stars to the equal that has his purpose but he so only has not been for mine in pleasant.
4 / 5
Loves a sound of this ball minis. Dipped his in mine 2013 dodge challenger rt and gives them the good tone. Taken all a raspy his out of straight pipes of the mid muffler delete. Yours exhausts will be stronger but there is no dron. If it wants to wake your neighbours go straight pipes with your mid muffler delete, but love the solid of aggressive sound concealed is not too strong to snatch these bad boys up!
4 / 5
Has purchased 2 of these to substitute a mid mufflers in mine 2016 Dodge Challenger Scat Sells 392. Taken his installed in the venue muffler negotiate it and ASS of sound of Has FALLEN!!!! One 392 Challengers already have the sound adds of a these mini the balls add the ferocious sound when you hammer one adds the little snap, crackle and pop to the yours exhaust.
4 / 5
These $ 25 mufflers is really the value that buys him. Spent 50 for both and when I took him installed really well of sound. Strong taking when of the a step and on go them is quite strong for you for the listen. The cold starts are some better also. It does not complain buying them.
5 / 5
2017 challenger 392 YOURS. The pipes add. Debated the long time on doing anything to this vehicle. A stock exhausts is perfect, this has fallen so only he on the notch. Virtually any difference in touching anything, so only slightly stronger around the city and the obligations of way stronger of the State. Deeper go them. Any empty/economic sound here, and with an active exhausts is the party done in heaven.
Only downside was to install. Substituted my mid mufflers with these and has had to go to 3 different tents before any one would do him. It goes city anywhere of 600 to 1000. (Because of curves around mufflers) Last tent has been to touched me 100 and was in and is gone in 40 mins.
Ossia An only description there is on writes amazon. The countless hours displaced that it researches on Youtube and forumz. It has been to car shows. Honradamente Can say prefer this in stock. And I prefer this in any tassel/aftermarket setup has listened.
4 / 5
Very a lot of muffler. Cost abordable and install was $ 120. A start on the sound is a turn of instant on. Wide open throttle will spend tears of joy to your eyes. His add for my Hellcat.
5 / 5
The sound adds! A model has taken them was the 3' anchored/outlet. So only be conscious when buying so only because of you will have to that take the yes calm adapters of those who has the 3' exhaust. Besides under rpm is his taken the good growl but swim annoying. Besides big rpm is really opens up and taking alot stronger. More separates no dron on motorway.
5 / 5
I have bought partorisca dip in 06 CSRT8 directly piped w/3”, I recently addition LongTubes and has had the strong smack has looked for to take touched of of this had stirs it of good descriptions of friends Mopars. Sad to say the complete waste! An interior baffles the screen is coming free and could here he almost as I whistle it or whine. I have imagined that the majority of a reviewers has commented on adding these to the stock exhausts. In this point anything would touch better then the together stock up.
5 / 5
Has had two welded in the mine Uploads RT and
his rattled at the beginning but perhaps an interior to pack moved and now has no rattle after the day to drive. They have taken rid of a dron in some automobiles but is two calm for me , hopefully takes stronger to the equal that take older. One in and was the diameter is not one same , supposition to be 3' & 3', more like 2.5 and 3 . It can try Flowmaster 40s if this gentleman'to to the pause likes master. Neither they have taken rid of this slappy raspy in wide open throttle .
4 / 5
Has used this to substitute old stock muffler on 1997 F150. Any really delete street dron. But you are touching the music would owe that be good. A one has ordered was 3' in both front and he behind the arrival has used 3' pipe of aluminium of cats-rear. More the light so that action accionaría and well his deep.
5 / 5
Any really calls this the muffler. More than the resonator. Short out of a raspyness to be directly piped but still has one same loudness. Has this in the 95 Chevy k1500 with one 350. Any cat and 3' piping with which some two banks combine.
5 / 5
Has bought 2 of these for 2016 Challenger Scat Band. A prize is abordable, and found it reputable tend that has takes a mid mufflers in place for these for $ 150.

A sound is aggressive in startup and fast acceleration, and has no dron in of the big speeds. Highly it recommends this
4 / 5
Another client satisfies here. Mina taken muffler has substituted today, this muffler is incredible, a sound is better that attended. The cold start is stronger, when or has paste a gas paddle, a sound is awesome. Personally it thinks in a cabin is calmer that stock. I can go it advances order two more to substitute resonator of mine. Better dollars I never spent in the car.
4 / 5
Has substituted a big mid mufflers in mine 18 Dodge challenger 392 with these mini balls. A sound is glorious. Roughly more 30 strong and very your deep plus this in spite of any dron inside a car. Relatively levels of his stock in the street that cruises. Couldnt Be happier with them.
5 / 5
Fast 2 days!! The balls are that I have required for mine 17 rt sound!!!
5 / 5
This touches to surprise. As it surprise it it take such the clear and aggressive exhausts note for a prize. It has dipped this in mine 2016 Dodge Challenger Scat Sells.
Would recommend to take that that the resonator deletes the installation of these mufflers, yes love your neighbours to hate you. While when being for behind the moment goes the, will feel in yours @@@cofre a same way he subwoofer fact.
Also, an exhausts the flow is not when being restricto and takings he súper aggressive exhausts tone any time when you accelerate.
4 / 5
Has dipped these in mine 2019 Dodge Uploads Hellcat, knows no any sense that the $ 25 muffler would improve your partorisca exhaust, are 100 sincere now, ossia a thing has better does mine like this far Hellcat, absolutely loves it, the cold starts are súper strong behaviour , aggressive is strong, but drive your automobile mello has not been the strong as when you see a cops the cold and would have to that be well, absolutely any dron, this will give you Attack of Tassel, or Run his of type for 50 bucks, will not be disappointed shabby and install them.
5 / 5
Very very he he. I have installed this like the substitution of resonator in the 5.0 F150 with the dynomax muffler, has no dron down 70 MPH. Combination a lot good.
5 / 5
Finally has taken this installed in mine 19 Challenger Scat Band and an only negative is that I took the months of pair partorisca take around when doing. Partorisca That want to so only the little more than a factory exhausts ossia perfect. Stronger in of the starts, especially cold but any obnoxious and that low speed/down rpm touch that has been missing before it was sound very better. WOT Is also better that stock of course and all can say is if you are in a fence this maintaining. The venue exhausts negotiate it touched 60 partorisca do so much partorisca down 120 has has transformed entirely a sound and experience. It can not be happier.
4 / 5
Touches quite well, although I dipped it on my silverado 2500 gas with which some cats where go directly and has had any pipe after the and no another muffler. Added the little rasp and has taken the little noise was
4 / 5
substitution of Perfect resonator that adds salvation-flow mufflers to your car/truck. These block a big frequency / rasp his and leave an action muffler or the system has retreated axial to treat like this has to that. My Mustang GT with action H pipe and big flow mufflers the sound perfects now.
4 / 5
Amazing little mufflers. Very solid priced , has built. The the mid muffler delete and has had this installed in his place. Good noise. Strong but only obnoxious when you are on that. 2017 Challenger ScatPack.
5 / 5
Has dipped two of these in place of a backside mufflers in the hemi. I have deleted a mufflers first with straight pipes and a dron was like this annoying. These he much more tolerable, this in spite of leave it to shout in wide open throttle.
5 / 5
Has bought x2 for my promises 392 load. Now it touches like the car of muscle has to that. Perfecto and knows master quell'also a first time that the attractive was can not taking grinning.
5 / 5
These things are surprising. His add without that has to that fall $ 1500, yes please.
5 / 5
Installed these in mine Sr/T Dodge Challenger R/T, has had the muffler & king delete already but looked to clean on a tone bit it. After doing some on-line investigation has been with these and could not be the sound the happy plus is awesome. Really a better bang for your buck, can any gone bad..
5 / 5
The material adds. Arrival and good accesses. Used the like this the resonator in combination with stillen catback exhaust for 2018 nissan @@@titan . It has had to notch of the relief cut in female final to exhaust clamp for presionar but the believe this was to feign also to be welded. His easy plus to cut that to cover on slits... And you kill all a rasp without muting a growl

Top Customer Reviews: Design Engineering ...

Rating: 4 out of 5 with 50 ratings
5 / 5
Produced EXCELLENT. I have used the little different heat in/the headed wraps and ossia a plus like this far. The difference of another 'Headed of Titanium On', this an is not done with fiberglass. It is the lava -mecer composite ossia woven near . Also different outside on, calm does not require partorisca drench this one in watering before wrapping your partorisca exhaust. Continuous in dry which WEAVES it to it easier partorisca direct. The gloves still would be recommended, but is not necessary.

A tip can offer: When I cut it some finals partorisca prevent further fraying, applies some súper-paste to some finals of yard. Otherwise, Volume to this odd cycle of folding an end of the yard and that looks for to wrap/pinch he in the way that maintains the tension in one wraps without untangling.
4 / 5
Really disappointed,, has wrapped mine 2 v8 longtube headed, has used this exact mark 4 times in a past in the motorcycle exhausts, last time was 3 years ago.. It is regarding it wraps it it has changed neither , or this was the fake has sent mine,, when calm extend tight a 2 wide thumb goes to width. He never used partorisca do that. But there is LIKE THIS FIBERGLASS in this I has had to that launch was my cloths with which have wrapped my headed. I shine the light focused brilliant in a zone or has used he in, and everything goes if edges everywhere. And to top it was, his coming free in of the zones of wind in a street.. I have bought the circle of $ 20 wraps on here this looks one same,, and looks better, is fatter, and a lot almost like this fiberglass falling was.. Until or,, but the d just clave with a material an economic plus.

Update. 08-21-2020. I have found some of an old material have used in my bicycles in storage. Has has had to that the piece of pair likes 3 ft pieces. They are 100 different. His smooth. And it does not take thin when or extends it. It goes to like a1.9 inched Wide has extended. Like this neither it has taken the fake or his quality is gone down in a past 5 years. I also bought there wrap concealed looks beat and Velcro around is tubing and such. It was the joke . A Velcro was so much week took it so only was and sent it behind.
4 / 5
Tl:dr Has used for air intake, has helped to plot

Like this here is that I , knows them ossia partorisca of the headed but mine arent lovely wrapping, like this the decided to wrap my air of metal intake. I have thought, if this thing is drawn to keep hot in and the help prevents to extend, reason any one this work for mine intake. I have wrapped my air intake and help fact in fact!! And it has had heat in a tube, a cold air would take rid of him in the second and then his just spending in the fresh air. They are really happy this is to exit, and in fact looks mine quite fresh :)
5 / 5
Fund:
These have been a some V&H Shortshots in Harley Davidson Iron 883. I have wrapped some pipes up without some shields of heat.

Reason he:
Looks mostly. Has think that looked damn fresh.
Supposition to regulate a heat to slightly of action of increase... The one who know does .
Has wanted to run these pipes without some shields of heat of some bands snapped and rattled around.

Installs:
Any easy with a place of hands. Find the buddy or the spouse! This work is like this damn hard for calm and does not look is possible for him to be fact very enough.

Is resulted:
I like one looks and a heat resembles dissapiate equally during a pipe now. Perhaps that action of increases? Those who knows?

Suggests steel of use clamps of some shields of old heat in place of bonds of zip of the steel.

The time will say the one who durable will be. A lot of compliments same of any-of bicycle folk!
5 / 5
So only installed real has GIVEN to wrap. This is not to close to a same. It has begun immediately it frays everywhere. It is not GONE IN have GIVEN PACKAGING. It WAS in a GENERIC PLASTIC STOCK EXCHANGE. REAL has GIVEN IN THE HEADED BACKSIDE. The FAKE in the FRONT has LEFT.
5 / 5
Laws so that it has announced. Wear the mask and long sleeves, a lot of particles a lot well of a cloth takes airborne when managing a wraps. I do not have it remarked until any walked for with the flash light. It can not be well for some lungs.
5 / 5
A lot often write descriptions, but this material is absolutely abysmal and can promise will not be never in that buys it again. Been due to like one wraps is weaved, yes has cut for the shortest piece will cause a whole circle to finally the untangle so that it applies it. They say that 2'x50' is enough for the 4-cylinder, but after my headed has run so only out of wrapping before it has taken 1/3 of a way done with mine midpipe ( has not bent-up in a wraps for some headed neither). So much, it calms the favour and buy at least two circles if it is anything besides to motorcycle-sized project. After reading descriptions here and that takes an external suggestion, has decided to spend gloves a whole time. This in spite of, please @give concealed will not help , reason every time manoeuvre or cut this wraps loss fiberglass-like edges to an air that inevitably achieve your skin to some terracing (these edges have directed to take by means of my shirt, mine shorts, and to my nose and of the eyes. Terrible experience to dip it slightly.) It SAYS And Mishimoto could be some of some better players in a game when it comes to the to to products likes him to him to them these, but has had an absolutely terrible time with his product and can not recommend applying he for calm. Highly it recommends having external assistance. Seriously, so only save you of the money/of the time and the yours the ceramic discharge exhausts instead.
4 / 5
Have the heater of gas water in laundry room of mine that the absolutely terrible frames when a heater is heating water. An exhausts has flown taking really hot and will burn you takings quite look for his. I am coming up with this idea to insulate the (a lot like you would do with a headed car) and take a heat of a surrounding zone. I have wrapped attentively an exhausts to ventilation that ensures some finals with the stainless flies the bond wraps. Bingo, it Is gone down a temperature in a room and a pipe is no longer he hazard. Although it is still a lot warm the no longer will burn you . A quality of one wraps is excellent, dips down well and remains tight. I imagine it probably it would do also in a automotive application or anywhere more need the wrap concealed can withstand big temperatures.
4 / 5
I waste of amazon to leave me leave my critical long negation with a lot of pictures of this product of fake.

Ossia Third mine tentativa to write this description and so only are that it goes to skip some pictures.

OSSIA A FAKE has GIVEN PRODUCED.
A real heat on go in hard plastic husband, not thinning shrinks to wrap like legislation of china.
A real one is woven closely and spills a lot little.

These products of fake is loosely halftone and GLASS of EDGE of the NAVES EVERYWHERE. I have been covered and itching for days.
Could mine dipped literally fingee by means of a fake a bc one weaving is like this feeble.

Ossia Ridiculous. Left me estaca this revises already. The people would owe that know ossia the potentially dangerous (edges everywhere!) And produced inferior.

Please so only go to Autozone or Pepboys and take a real thing for $ 5 more. They are literally still finding edges of this now, like the month later.

I also bought some salvation temp the spray for one wraps of this vendor of the fake but any way am risking a real fire hazard with that.

So only go to a tent and take a real material.
5 / 5
Listens to the plot of people says that wrapping headed yours any the difference. I can say calm of my experience that does. A difference is not to like one transports is going the magically be AC the cold but a reduction of heat is real. My feet no longer burn up and my cabin is fresher. I have wrapped so much mine longtubes and has done for me. This in spite of, there are two things would owe that I comment. In the first place, you are wrapping to of to to the headed likes was, mark of sure and buy around 100ft. And secondly, and it thinks one the majority of of entity, MARK SURE to COVER YOUR ORGANISM WHEN still Yours WRAPPING EXHAUST! It listens a fiberglass in this wrap is torture when it locates your skin. I took 3 days to take he out of my arms -.-' It felt like the prickly needles that cut on hands and forehands. So only be careful. One wraps the works add this in spite of. Probably I will buy any plus and wrap my x-pipe.
4 / 5
I have bought a titanium that thinks it a lot of frey and take during a place like normal fiberglass done. HIS EQUAL! This material goes partorisca take everywhere, and his in disposal partorisca locate you and your cloths. You are going the itch. It has to that also this in a zone with circulation of good air. Outside to treat that, his plus or less sincere. I used it partorisca wrap some headed in mine GMC pickup. It has taken one 100 ' and has not been sure the d there is enough, but was ABUNDANCE for an engine and of the headed of passenger, with quite spare. This helped reason I messed on the little time when I originally begun, cut it a period the little shorter that necessary. Mark sure taken some bands of qualities of stainless steel (basically metal zipties), and will be in shape well. Once installed, the utmost look! The headed does not burn by means of my bosses to cover anymore any one!
4 / 5
An only difference among this 'titanium' wrap and 40 products of the sides in a phase is so only a prize.

Sees a semi-detached picture, one wraps has declared specifically any need to apply salvation-temp produced and can do a work well results to be very very attentive.

Well, Himself master wraps this turn to aim in just the pocolos once has turned minutes in an engine, ossia yours .

Knows will have some smokes once first start on a bicycle after a work done, but in spite of an excessive/longitude that burns of a smoke of one wraps, a black wrap turns to aims like this quickly that I can not believe a seal of the prize and the quality is opposite.

Does not recommend this wraps, at least, if has other elections other vendors for a besides down cost that 50 of this product.
5 / 5
Uses enough the bit of this material in my tent. Works really well and (I think) look fantastic when fact. Also, a prize for this particular quantity is a lot down that I can buy he by means of my wholesale cashiers! It does not cause a itchy feeling of a regular product, but does the 'fibrous powder' that probably would not owe that be breathed in the regular base (my opinion). It does not forget some hose or stainless bonds clamps.
5 / 5
Has ordered a 2x25 thought of the circle would be enough for my straight pipes but wound on that require the second. A band of prime minister was so only shrink wrapped and has been concerned that could be counterfeit but a quality was utmost. Had the fair has bitten to fray in some finals but some tape resisted it together until it has taken a clamps on. A second container is gone in the one who alike legit has GIVEN packaging but some flanges of one wrap was súper fluffy and to the equal that has wrapped had the tonne of the edges release that I begin. You can see a difference among a two on in some photos. Included once it was in a bicycle and coated in a have GIVEN spray of the silicone still can see which is rougher looking. We will see controls up... In general, easy to install and a lot terribly overpriced but the quality is paste or lose.
5 / 5
Has wrapped an exhausts in my Side X Side with east. Verified in several places of cat, this wraps looked to be a better election. A lot of people have spoken in the products the economic plus that takes fibber glass throughout, and that they have to wet one wraps to avert some of of the this. Also coming averts after the few years. It has loved so only do this once, how is spent of the extra money . First time I never this, has been a lot well. It classifies of the ache to take an exhausts of, but a wrapping was quite easy. He for my self, as it can be done for a person. It was to know haste, as I have taken my time. It has had to redo first pipe, has not liked him like this has finalised it on pipe, but imagined out of better way with which concealed. The bonds of metal have used to ensure wrap, class of the ache that takes him tight but has imagined that it was to. He the big difference in some subjects of heat.
5 / 5
Hate that easily these fraies, but I bad cloth usually does like this, edge of the carbon is not too dissimilar. Kinda messy Sometimes, be mindful around pets.

With this said, if an exhausts is of your car, is calm quite can does not wrap around your partorisca exhaust in a circle because it is not to wound a lot tight. Better of just developing he in my opinion, better leverage for the legislation wraps in all the chance. They recommend the relatively thin overlap and am sure ossia sufficient. I have bought four circles to do my integer exhausts reason have used in the 65-80 overlap. And when it has taken my car has dipped ready has taken compliments when a type has joined my car down. It has changed in fact a sound of the mine exhaust, enough the bit could add. It is calmer and To good sure resists a heat in better.

I desire has been woven bit it tighter and hate that fraies LIKE THIS easily reason in the now looking well is not already easy, has taken tedious, but was in good sure values he. It is not economic neither, but does the enormous difference.

Can not say anything roughly longevity cuz is so only be on for the week as ¯\_(ツ)_/¯
5 / 5
has Purchased this to wrap an exhausts pipe in mine webasto heater in my camp. It takes the little heat, but at all like a pipe is wrapped around. It is around be easily and there is the small smell when it heats on, but goes era. Any bad odorando, but remark it. I have read that before I bought it, as I have known roughly that. I thought that it that it was the thing of time, but raisin every time turns a heater on but a smell is less and less each use, as it has used his now. It would recommend in of the zones stagnate where precise something small. I seat sure at all it will burn now that ossia around an exhausts pipe. I have used the stainless steel exhausts wraps purpose closing bonds of boss to ensure it on both ends. So only it looks for it these words esatte on amazon. Nizza To have my well of look of the project.
4 / 5
Working adds like this far. I have looked the little video on Youtube first to try to install this in mine new manifold and found the pair of suggestions to be very useful.

1) Spray of the silicone of the use likes has GIVEN is to help protect a metal to choose on contaminants. It will help to preserve the one who youre wrapping and protect he of corrosion.

2) I skipped some bonds of zip of the metal and has gone directly to boss of security to ensure one wraps. Too many Complained in a zip of metal joins a lot that resists . The boss of security is workimg was a lot.

3) Begins to wrap in a subordinated and work to a flange of manifold in a boss when wrapping manifolds/ of headed. This has done one wraps the cleaner of plot and easier that ensure in a primaries with boss of security.
4 / 5
Has purchased this for deception, as there is no @to @give some headed there was the experience has come already with the circle of this exact product.

Will say that he absolutely works, and a lot of discolor likes fiberglass on. While there is not dipping an infrared thermometer in the, to at least a hand looks the insulate hot. I do not have remarked any time of main oil, and my headed run around my casserole of oil (Subaru engine, the headed original has had fiberglass insulation packed around). It was quite easy to cut and install, but the time of has bitten that eats (like any one wraps will be).

GLOVES of WEAR. Some will say calm does not require them , these people are crazy. Included spending gloves of nitrile for the majority of one installs, has chosen fiberglass out of my hands for at least the week. It averts to run this in your hands if at all possible. You will be very tried, as it feels so only like the cloth, until calm that. Then, so only it will rain your hands with fiberglass splinters. Included the mask could not be the bad idea, as it has blown roughly of of the east out of my nose.

Also would suggest to use zip of stainless steel-bonds, and considering his tool to take them tight. I have used the pair of needlenose and the flathead screwdriver, and was quite annoying. They are sure his tool bit it better and frames for the product the orderly plus.
5 / 5
After the tonnes of investigation, am coming to comprise the tape of headed black finally only turn to aim inside a first year, and I damn sure has not loved aim. Neither I want fuss with drenching fiberglass tape and all a hassle this goes with him. I have discovered then this product. Continuous in dry. Any fiberglass. The look ADDS. And it will turn in colour. It is perfect!
4 / 5
These looks partorisca be the fantastic quality! A trick is by train of the maintain on. Has not founding bonds of sum of stainless zip, but yes wrap this quite tight, could almost 'bond' he. At present it uses this in mine upgraded the downpipe and looks to maintain temperatures of bay of the engine the low plus that without.

REMARCE: This thing mokes' and has the differential smell for the very long while after initial installs. Ossia Known/normal. But good to maintain in alcohol, is installing this and gone back for estacionar and remark something esmoking' of a bay of engine. My brother has thinks that that we had done an installation wrongly or has had an exhausts leak, until I have informed that this was the normal byproduct of one wraps esettling.' Finally it goes it was (in my chance has taken roughly 2 weeks for there to no longer be any noticeable moke,' and almost 4 month for there to be any noticeable smell)
4 / 5
Easy to do with, I didnt has to that drench in in of waters he. I reccomend spending gloves because although they are rock of lava the material edge still has glass of edge, but calm of the that takes it like this bad like usual. Also reccomend one has given bond of stainless steel that presiona tool, has thought so only would use pliers but has finalised to ruin more the bonds then would owe that have. Bought a tool and ruined fewer bonds, although has the tendency to on presionar things. Also you are wrapping the tubular manifolds take one 1'. One 2' also width to the manoeuvre and calm arrival with excessive overlap. I also used súper adhesive to maintain a material of coming averts in some finals after cutting, finds something quickly drying the cause is annoying that it has to that expect for him to dry.
5 / 5
Has taken this to wrap a pipe in mine ATV (Four-Wheeler) to the equal that has taken burned By means of a work of plastic organism. It had purchased a aftermarket exhausts system that has augmented significantly a temperature of one exhausts components. I have wrapped a pipe of a point where attaches to an engine, all a way until a muffler. This, together with a compraventa and application of Thermo-Tec Hot and Touch Suppressor ( ) is gone down a temperature of my work of plastic organism of 120-125 terracings down to 100 terracings.
HAS the quite fresh look his, likes edge of carbon, but everything of my pipe is hid for behind plastic so that it has not imported mine. You will require hose of metal clamps to maintain it wrapped around a pipe. Please ignore a zip-the bonds in a picture have comprised. They were used so only to resist a material as it applied it. Hose clamps was installed and zip-the bonds have take.
4 / 5
Arrived punctually and to the equal that has expected. The walk to try tried quell'last night was. He a work. Look so only this in spite of - this material looks to be that fiberglass insulation. Gloves of the wear and the mask especially owe that cut the and/or work of down. My hands have been all the classes of itchy never of then installation.
4 / 5
UPDATE Oct 16th
Done excellent for 600 miles, the box has seen the one who a heat redirected has done to a rest of an exhausts system.

Better that has expected, but in a Polaris sportive 570 oem exhausts; it is resulted to be no such the good idea.
Be has 2 joints have resisted closed for cradles agotadoras, some cradles where forced to drench on a heat, included with stainless bands by means of a cradle eyelets, to help maintain some joints have closed.. A Goodness gaskets has taken hammered.
And an extra heat forced by means of a muffler the harm has caused to discharges he of powder for a bar of transmission.
5 / 5
Has measured each temperature of pipe of the headed before and with which. These produced has not reduced any heat.
I suspect is knockoff been due to as it was packaged (simple), that easily spent , all a fiberglass pieces that nave everywhere, resulted like this tightened when wrapping around the curve and he have smoked like crazy in mine first walk of test. Inferior line - has not done at all. It would owe that it has read it all some critical first negations to buy :-(

Try and find a REAL has GIVEN the lava wraps!
5 / 5
Plainly The container has wrapped.... That The must has been the fake because it has not helped to contain heat in my pipes. If it has not been the fake then he still a lot anything but look quite wrapped around my pipes.
5 / 5
Has wrapped my exhaust in 75 bronco to reduce the heat felt by means of a joint to walk and heating on my lines of fuel. I had it now for the few weeks, as I can not comment still on longevity of a product.

The has not been easy to install even when wet. I have cut a material with the good pair of the shears and he still frayed. I that operates it but he sucked and still with gloves and protect of the eye has been covered in fiberglass. HAVE TO THAT SPEND GLOVES THAT YOU SLOWLY ON LAUNCHING WAS With which And PROTECT of EYE!!! Also the wetted in the first place, likes drenches for at least ten minutes. I have launched literally it was mine tejanos and tshirt has spent reason was fearful that some edges/of particle would take mine washer and in other cloths. I have used tape to heat to wrap exhaust in harleys with my dad like the boy and I have wrapped each one which exhausts in mine in current karts that grows up. They are familiarised with a material.
5 / 5
Has purchased east exhausts to wrap reason has been done out of the edge of basalt more than fiberglass likes the majority of them. Although a basalt is nowhere prójimo sure to inhale, does not have all some dangers of fiberglass.
Has taken usual fiberglass precautions while installing, still there is not remarked anywhere after so much in an air, or any of him coating my cloths after neither. All-in-all an installation was quickly, easy, and with much less cleanup. Any subjects with him was had to more my inexperience that anything wrong with a product

has used his bonds (any one comprised) and has resisted perfectly well for my uses. It has taken one 25' circle, which was a perfect quantity for the Delkevic system for a Vulcan S. This blacked out of some pipes to armour plate exactly to the equal that would like to, and has resisted until of sun and snow.
5 / 5
Has used this to wrap an exhausts in 2014 Yamaha Grizzly 700. This was easy to install, and has resupplied protects of significant heat for me while it locates. It would suggest to run your ATV after washing or that spends for wet zones to entirely dry one wraps so that you do not rust a pipe.

Look, ANY WASH of PRESSURE DIRECTLY IN WRAPPING IT, PRESSURE of USES of HOSE of ONLY GARDEN!!! I have done this deception, and need to king-wrap this section of one exhausts like this spent one wraps.

In general ossia the product adds , and highly recommends.
5 / 5
I have wrapped one of my side exhausts mufflers in mine 2000 Dodge Viper, partorisca see if a door lateralmente sill could be fact more fresher, and a sill paints not breaking, crimps and finally the flake was. This wraps has had the habit of augments a coverage of heat of the factory. A wear of results austounding. After the walk along, can situate your hand in a sill, and not being the snake has bitten. To good sure will do one same to a side of passengers. I have not expected such the drastic transmission partorisca a better. I have wrapped so only a muffler, and no a conversor catalytic, because a conversor takes partorisca close to a temperature of the combustion of one wraps substrate. Sill, With just a muffler has wrapped, a transmission of global temperature was dramatic.
5 / 5
In the first place was, when beginning your loop, bond one wraps around in the knot, then wrap around the, does not use the bond of metal partorisca begin your partorisca wrap. It maintains partorisca do one wraps and the extend to the that needs around some corners, use acute scissors to trim any fraies. Mark sure partorisca buy some bonds of metal.

Now, once is done and go for the walk imitates and smoke the small and the cure. Then his amazing wraps, really maintains a heat out of your leg and I have the little compliments in some shines of way. Ossia Material of upper quality .
4 / 5
My doug thorley the headed was really strong, and my taxi has run really hot in a 120F been so it has added some of of the this. It is quite forgiving and easy to install while yours the little patient. This was my first time doing the headed on, but is resulted enough well, and to good sure helped with heat and noise. It was able to do a hole run in only 2 sections with 2 or 3 zip of bonds of metal.
4 / 5
A 25' the circle is not the engineering of real drawing wraps. The amazon sent another circle of one 25' and was the to same poor quality likes to last. Among plastic with the sticker in the different real has GIVEN this among the plastic container. One 50' the circle is a real shot . A different in quality of a lot of noticeable. So only be conscious a 25' is not real or is extremely the poor quality has compared to a 50'.
5 / 5
Are a lot disappointed with a durability/of quality of has GIVEN the titanium Exhausts Wraps. The installation has not gone too difficult using hose clamps and another together of hands, this in spite of a durability of one wraps is rubbishes; during installation one wraps/the pipe rubbed against drives of frame of my car (the steel rounded, coated in the hule, covered in painting of smooth gloss) roughly are time like this slightly mecer a pipe behind and advance for the take seated - during this chance of embrague small, one has GIVEN wraps shabby and rasgó pierce it roughly 3/4' in diameter. A hole is not in the something critical, as I left it so only a way was and installed he - but probably does not purchase this produces again.
5 / 5
Reason 2 stars... The prize and the material untangles easy. I have purchased this reason is looked to be the product of prize in another cast. Well I have quite lost to untangle that I have had to purchase more to completed a work. I have decided to try that the titanium of the lowest prize wrap (less than half a more comprised cost SS STRAPS). Well I have learnt that a product of the engineering of the Creation looks good and wraps better in of the curves stagnate but a lot enough to justify prizes. Some products of competitor looks very reasonable , is fatter and looks to be the data of better value a prize and I have not lost any material to untangle.
5 / 5
Fantastic! I have ordered this for mine 2012 BMW R1200GS -- I expected it to be the little harder that do with, drenches one wraps in of waters he and of the gloves to use to install is a lot forgiving. I have wrapped the section to exhaust this was in a direct street of any one goes forward has on launched, like this would take them all the classes of rocks, muck, another street debris constantly pounding a chrome. This has been stands out like this far, has resisted some finals on with the bond of boss of stainless steel, probably would go something different as they have not looked perfectly of the tight.

One another thing to remark of my investigation, one of some precautions with exhausting wraps is that with a difference of temperature on where yours wrap arrived to finalise, there is the possibility of an exhausts the pipe that cracks or resulting a lot brittle.
5 / 5
After burning my snowmobile the dress that looks gortex BMW in increasing trousers. I have decided to rewrap a front and pipes of headed backside. Like this leading fiberglass has based to wrap wet a bed.
Still although I fold wrapped some pipes of headed. A more next pipe to the leg still will heat on a better Yuppie has spent of jump.
Could so only walk and walk bowlegged, would be well.
Acclaims.
4 / 5
The fact adds in 2013 RAM 2500 Cummins Disturb Truck of Diesel. I have wrapped so only a portion of one exhausts prójima of mine G56 transmission because an exhausts is too prójimo to a transmission and has been known to cause subjects with heating on a fluent interior and potentially in habladores the houses of bell have broken. With which have installed this and has used a Silicone to seal it can remark my time down is using the thermometer GONE. In my opinion, ossia the must for RAM 2500 truck to insulate after your transmission to maintain your fluid of time of transmission down.
5 / 5
Has bought two circles of this (15 feet long, 1 wide thumb) to wrap a headed in mine Deep xr650l. I have used this product without wetting it, and has has spent gloves of latex. It has caused the little irritation but no bad. It is hard to wrap in of the tight places without causing some minor fraying.

After several weeks to beat in a bicycle of one installs one wraps well of still look. A colour changes the little bit, turning slightly browner, but still look really good.

In an end am satisfied with a same look although it is class of blurred now. And I am very satisfied with an efficiency of an on. I have used hose clamps to ensure some finals, some bonds of stainless zip would look better, but has had hose clamps already.

UPDATE: roughly 8 month afterwards installs, a headed on in mine looks of motorcycle craps. Somehow there is it rasgado and now is coming unwrapped. Has has had to that perhaps do with a way wrapped them on, the am not sure? But I think that that it is now of to take one wraps and try the coating of type of the product...
5 / 5
Fact very partorisca wrap mine disturb manifold and downpipe. He so only smoked partorisca the little moment with an accompanying smell. The only time will say like this resists up with an extreme heat. If it buy this, PLEASE PROTECTIVE DRESSED FRAY. Long sleeve, long trousers, gloves, and has included the mask would be ideal. When it Locates your skin and dresses, does not exit easily and itch partorisca days.
4 / 5
This material are adds! Any itch or rash like resemblance fiberglass the products can cause. As the one who can say that it is doing. It has been in easy and is súper flexible. I bought it partorisca soothe an engine of diesel in mine e350 the van and he have done! It would wrap my downpipe yes was had of the appeal was so only partorisca that.
4 / 5
Ossia The knockoff has produced. It is not any one has GIVEN wraps. It is the economic Chinese knockoff. It is so only fiberglass . If you look in a picture has comprised a one in a fund is some has GIVEN partorisca wrap bought of a cashier has authorised.
5 / 5
Took it today in a topmast, like the colour of a cloth remember materials of tents and military rucksacks, etc is done of.
Has bought 15 feet partorisca heat wrap for the only small manifold that it is roughly 1.5” GOES and 2' Long in period.
Wishes this product has comprised the bond of zip of the metal ,
could have me has saved a travesía to a tent of hardware.
4 / 5
I really like this has produced. It was really easy to use and extracted well. I sandblasted and repainted an exhausts in mine Suzuki Z50 ATV. I have used big temp produced partorisca this application.

After drying, has wrapped then he with this product, using small stainless hose clamps.

This wraps resupply less hot radiating of an exhausts. That gives the margin of the main security my young daughter the one who locates this ATV.
4 / 5
Has used the majority of this circle partorisca wrap of a pipe of headed to a front of a mufflers in a Ford old pickup with dual exhaust and stock exhaust manifolds. A secret, unless has 4 arms, is partorisca use some tape partorisca maintain this slippery to wrap situate calm so that spent some pipes. When Spaced equally, then go back with stainless steel tywraps each one that 6 thumbs or like this to permanently resist a heat wraps on, then peel of a tape. Load of port has a better shot in a tywraps and was identical to one some have purchased on Amazon. Beware That will have the enormous quantity partorisca smoke produced a prime minister little startups! It looks the toxic cloud .
4 / 5
The material adds! I have wrapped some pipes of 2 motorcycles with this material, more recently in the Deep CBR and a lot has reduced a heat felt by means of a chair and right leg.

Notes partorisca mark that this titanium wraps is bronze very brown/ in colour. Originally I thought it that it was black and the money weaves. The still fact adds, has finalised so only spraying he with black of the big heat exhausts partorisca paint to be black and match my better bicycle.

Also some finals come untangled a lot easily until starts partorisca wrap. So only the wrap on he in a start and be sure partorisca the curve on before it armours plate banding the in another end. Painting it after really the looks cleaned, while a product is still tacky can soften you all a fuzzys down with your hands befroe dry partorisca the look cleaned. Again utilisation this material partorisca bicycles, partorisca the cars can not import yours.
4 / 5
Has dipped this in my motorcycle exhausts partorisca protect. I have burned 2 pairs of trousers and has been tired partorisca feel a heat against my right leg. These produced is easy to install. Any need to pre wet. Mark sure partorisca order some bonds of metal as they do not come with this box.
In general done the good work that cut down a heat of an exhaust and resupply the discharge partorisca protect. It would recommend.
5 / 5
Has installed this the few months does looks partorisca do well with maintaining a heat down. I have had the coverage of headed in my jeep before this and this have destroyed a welds in a headed.

Cures partorisca use when installing or will do you itch. Also this does not take hard likes fiberglass with which cure, still looks partorisca be fragile and can be harm for the things that attacks it.
4 / 5
When you Use this heat wraps, be sure partorisca buy SAY straps of metal. I unknowingly bonds of qualities to experience lower that stainless steel and when I have used a tool for presionar a strap, a buckle there is pulled averts. The one installation of headed integer and now am concerned some economic bonds with loosen and ruin a work.

Top Customer Reviews: Spectre Performance ...

Rating: 4 out of 5 with 48 ratings
5 / 5
It was able in impulse he 1971 Lincoln 460 WITH a C6 transmission any problem.
5 / 5
He a work. Aixecat Each iron Chevy 350 with transmission of automobile (TH350) weighs around 750 lbs was and in. The dish is flat. The May HAS causes of DATA for worry. Used a point of aixecar- in a backside in a road has been to represent for a transmission. A result in an engine/trans combo poses in 15 titles of horizontals. This has not gone enough. In a road behind has used a point of impulse of the centre. This result in the 30 curves of title. A balance was perfect. It has to apply the small hand-decrease of streaky pressure to clear a wall of fire and the small arrives hand-the pressure has lined to clear a member of cross of the transmission. That is to say perfect while I do not want a semi-detached cost and height to attach the mechanism of adjustment of the balance.
5 / 5
Yep, looks sketchy And like him no except mark.

FORD 460 (1987 And other similar years) will REQUIRE the HOLES have DRILLED. I have finished reaming was two of a void, and has drilled then two holes to return a manifold. Cela 460 is almost 750 lbs and goes aixecar he in and out of my bed of truck without subject, any creak or crack.
3 / 5
Good plan, but is not also impressed with a welds be only in three something. It gives it more the stars gave me a warm and blurred with my big bloc dangling in an air. A weld would have to go all a road through. I will fix it...
5 / 5
That is to say the must has goes to do in your engine. This will maintain you to fall anything down in your manifold of intake. I have learnt this a road takes. It IS also I attaches like an engine lifter while it tends to leave an engine to hang of a hoist at most that neutral plant the very done easier when is installing a calm engine. Work very good and for a prize is the must has.
5 / 5
My husband has required this to be able in impulse an engine out of sound bounces. Once it was attached in engine and goes aixecar in a hoist, winery fantastically. While laws in his boat, which are not finished never in a weekend, has an engine in a hoist out of his road. Has an engine in a hoist the month and during this time this dish of the impulse has lined on in this engine. The prize and the product add a lot adds!
5 / 5
I postpone to take this for far also very time. Already I have me aixecat 2 V-8 east with intakes of aluminium in and was and is perfect! Cheap and easy! That more can the red blooded the flight of American boy?
5 / 5
I add to choose in of the engines especially with the parts of the dish have launched. Any I same uses 4 rays in my small bloc Chevy the this and this dish has absolutely very flex at all. An elect second this up for a first time prender the preoccupy tin to you line your engine.
4 / 5
Good concept and good prize. Even so, a welds left the small bit to be has wished. It have not trusted my new engine in this mediocre welds, as I have redone the on. If calm this, only take to take your time and very in the heat or he warp.
5 / 5
These capes of thing my Mopar 440 V8 easily! Any angling, not pulling . A welds can look small, but is strong abundance. If I any one need never another no very subject that buys this again.
5 / 5
It was able to impulse he 1971 Lincoln 460 WITH a C6 transmission any question.
5 / 5
A work. Lifted All spend Chevy 350 with transmission of car (TH350) weighing around 750 lbs was and in. The dish is flat. It has not given Never causes partorisca worry. Used a coverage of lifting to a backside in a way was partorisca account partorisca a transmission. A result in an engine/trans combo setting in 15 terracings of horizontals. This has not gone enough. In a way behind has used a coverage of impulse of the centre. This result in the 30 terracing tilt. A balance was perfect. It has had to apply the little hand-held pressure down to clear a wall of fire and the little arrive hand-held pressure to clear a member of cross of the transmission. Ossia Perfect like this have not loved a cost added and height to add the mechanism of adjustment of the balance.
4 / 5
In a pasted has used the canal to attach to a intake in both sides to pull an engine. With this dish of impulse, was able to so only take a carburetor, scrape a dish of impulse has retreated on to a intake , attach my host, and just impulse an engine of a car.
The work adds to seal of a intake when the carburetor was.
4 / 5
Returns perfectly in the small blockade Ford (289) with 2barrel carb intake. The access has confirmed on 4 barrel also. Only note to add is use a carburetor spacer and washers to fill an empty in a studs. Your edges so only go like this far in a stud likes spacer and washers ensure you firmly can locate a dish of impulse. 289 it Is roughly 500 pounds and a loft has done well. Any warping or cracks in a welds. Recommended for scrolling of fast engine.
4 / 5
Yep, Looks sketchy and like it no except doing.

FORD 460 (1987 And other alike years) will REQUIRE the HOLES there is DRILLED. I have finalised reaming was two of some spaces, and there is drilled then two holes to return a manifold. Cela 460 is almost 750 lbs and lifted he in and out of my bed of truck without @@subject, any creak or cracks.
4 / 5
Good dish, but am not impressed too much with a welds be so only in three something. It gives it more the stars gave me a warm and blurred with my big blockade dangling in an air. A weld would owe that go all a way by means of. I will fix it...
5 / 5
My husband has required this to be able to impulse an engine out of sound bounces. Once it was attached to engine and lifted in a hoist, control fantastically. While it does in his bounce, which is not finalised never in a weekend, there is an engine in a hoist out of his way. There is an engine in a hoist the month and during this time this dish of impulse has taken to the engine. I produce to add and prize I really adds!
5 / 5
Has used this in the Fully built Vortec 350 with all some installed accessories. There is a Edelbrock Aluminium intake manifold in the and a dish of the impulse done like the charm. It was skeptical to use he with aluminium at the beginning but a focus on a dish still has said to be able to be used with an aluminium intake until 1000 lbs. If you are doubt , is not !!
5 / 5
Ossia The must has goes to do in your engine. This will maintain calm to fall anything down to the yours intake manifold. I have learnt this a hard way. It is also he adds like an engine lifter to the equal that tends to leave an engine to hang of a hoist in the neutral plus situates like him the a lot of easier fact when you are installing a calm engine. Work a lot well and for a prize is the must has.
4 / 5
Postpones to take this for too much long. Have Already lifted 2 V-8 east with aluminium intakes in and was and is perfect! Economic and easy! That more can the red blooded the American boy master?
5 / 5
I add partorisca choose on engines especially with the parts of iron have launched. I any uses inclusos 4 rays in my small blockade Chevy the this and this dish there is absolutely a lot flex at all. A second choose this on partorisca a first time prenderá partorisca concern you can resist your engine.
4 / 5
Good concept and good prize. This in spite of, a welds has left the little has bitten partorisca be wished. It have not trusted my new engine in this mediocre welds, as I redid them on. If calm this, so only agree to take your time and any in the heat or he warp.
5 / 5
If you are the engine tinkerer, ossia the must has partorisca installation of scrolling/of the engine. Well, perhaps any one the soyust has' except frames a work an easy plus.
5 / 5
Pulls my Pontiac engine without a group. That the nightmare.
Has used the strap. An engine is exited has fallen almost.
While it was reconstructed has ordered this dish.
Has had an engine in and trace in 30 min.
Is gone in directly and slid right to plant.
5 / 5
Has used this in mine LS engine with two iron of corner weld on, much more economic that a LS flat of lifting of the engine
4 / 5
This thing manages my Mopar 440 V8 easily! Not bending, not pulling. A welds can look small, but is strong abundance. If I any one need never another will not have any @@subject that buys this again.
4 / 5
In a literally said sticker can stimulates 1000 lbs same with an aluminium intake! Really! Like this at the beginning it was skeptical but is not bad! Lifted The big blockade 454 without question.... It was surprised really 5 star has won
4 / 5
produced Adds. It was skeptical with a low prize, but is the very good thickness and a lot of welds.

Lifted The 390 V8 without questions
4 / 5
produced of Good quality. Turn of mine 4.3 mercruiser. It was not enough, but it take a work done. You recommend. Shopping again has required it .
5 / 5
Has shipped immediately and is the good piece of work, can not expect try has been
4 / 5
It has done well. A group upper bent during use. It was fearful a welds was partorisca break. But tolerance up. Bought the different one to reinstall an engine.
4 / 5
Used it partorisca pull it sbc 350 was with th350 has attached .. The fact adds
4 / 5
does not look partorisca be problematic, has not tried lining it on still.

Looks quite durable.
4 / 5
Ossia My second an of estos.un flat of impulse so only the like this easy fact to impulse and manage my projects of engine.
4 / 5
Has done perfect! So easier that do those canals or balancers
5 / 5
has had to take a small blockade 350 of mine C10. This was the no-brainer compraventa. A cost was economic, the quality is sum . Still I have it and it is used still to yank/engines to fall when the precise!
5 / 5
Pulled out of mine 383 of mine 1970 Challenger and was solid.. Any @@subject
5 / 5
has Done the dish adds was flush and welds was adds !!!
4 / 5
A dish of looks of impulse to be fact well and do quite well to pull engines. If you pull the plot of engines this is a better way to choose them level and square. The frames that goes back in the breeze.
5 / 5
Any a lot of to write another that does well and as it has feigned.
4 / 5
I lifted he 517lb. Big blockade Chevy engine with this dish of impulse bolted to an aluminium intake manifold, three times, level of eye.
5 / 5
Quite heavy so that it was the good signal , the quality adds that it use it to pull the 454 big blockade Chevy like this yeah resist all have launched in him. It notes 8 metal any economic metal.
4 / 5
Has chosen on my SBC with Muncie has attached. Attached to aluminium intake. Any question. It forgets some transmission of descriptions. This need of types to grow the together.
4 / 5
Pulled quell'has been and used it well with which take here. Rasgado A legislation of engine out of my truck!
5 / 5
There is pulled my woman sbc 350 without question. Strong and has had any worry that the could not resist engine. Bolted Well the intake. I have had so only 3 hardened rays partorisca armour plate that ensures it to a intake reason has had the ray broken in a intake. Fact like the field!
4 / 5
Works awesome. Attached to aluminium intake manifold in the small blockade Chevy.
5 / 5
There is drilled the little more holes partorisca pull bmw the blockades have gone by some holes of jacket of the water, has balanced much more. The perfect works
5 / 5
there is Pulled a small blockade, and there is stabbed another in a weekend. Perfect fact.

Top Customer Reviews: Design Engineering ...

Rating: 4 out of 5 with 50 ratings
5 / 5
Ossia A tape of better gold there. I use it partorisca line an interior of big-temperature reflow ovens. There is another resemblance looking material there in the prize the economic plus, as I thought that it would try it. Some the held insulating were very alike, but some glues is the different history. Some photos say a history.

Please on-vote this yes calm description the the expósito useful, as another can see it too much.
4 / 5
Absolutely gorgeous, to good sure maintains my intake time down. As for a heed other descriptions of villages around an internet with premature peeling of a tape, I in the first place sprayed an element wrapped with 3M súper 77 adhesive spray. In my chance has wrapped disturb it anchored has built how is located by means of my turbos hot side. First to wrap a intake, my premiers few walks with a car pointed heat drench after attractive strong full, especially when it is hotter outside.

I installed a tape partorisca measure a diameter (3' in my chance) and has added roughly 1/8' so only partorisca complete coverage. It has taken the moment, but I flipped each band on and also sprayed a 3M adhesive to a rear side. After the little hrs of operation, one with engine main time a tape has treated like this expected, was fresh to a touch shortly after closing down a vehicle and has aimed byline of zeros of sagging or peeling up. A bit those that walks and days later and same results. Still sprayed was with watering to clean a street debris was.

A last value of what that mentions, any class of radius goes partorisca be difficult to wrap. Partorisca This I cut one wraps for the half and used shorter 1.5'-2' band partorisca take 180 terracings of coverage properly. If you are wrapping a intake or intercooler piping and your filter or the coupler is estimated partorisca same diameter, recommends to leave that a tape of gold has retreated so only enough for your filter the clamp on. In my chance am running the K&N 3' the cone and was too snug to return in a gold on. After the few tentativas to frustrate I scrapping has finalised finally one 3' section to the equal that had taken has beaten also on slope of the tentativas to install my filter to consider presentable.

Sees semi-detached picture of my engine for reference.
4 / 5
This tape is sum ! I have wrapped my STI intercooler and averts of him looking add, helps to prevent my intercooler to result the heat there is drenched. It has treated this installs in a winter as I have not had the occasion to try he in a summer, will update my description but I strongly recommend this product. I have not had any question with a tape that sticks to anything (intercooler or AC tubing), although I have cleaned all some first surfaces of taping.

7/31/16 Update: underhood the time is prejudices a difference of day. To be just, I this upgrade in the times still likes disturb it of coverage and the excluyente of the main hood, as it can not compare what differentiates was of just a tape, but no longer chair as I am losing them can in a summer. It is the economic upgrade with noticeable difference, can touch my intercooler after aggressive behaviour or autocross, could any one that before.
5 / 5
Supposition to reflect 80 of hot, but after wrapping my Cold Air Intake the tube has found has added 7-8 terracings to his normal temperatures. Ossia To an effect still likes a bit money insulated reflective tape that any included announce concealed. And this was $ 17 more in $ 39 total. That the waste of the money and the failure that announces. If it is taste and wants to cool of your air intake temperatures, will have to take disturb it. Unfortunately ossia an only way until they invent something concealed to take fresher like the engine takes hotter.
5 / 5
He the work adds that it isolates a heat. I have used a tape in my test to heat insulation foam and isolated my air intake compartment of a bay of whole engine. In some photos you cant the see all but a hood has a mould of foam to try to heat to block of a street to heat totally. I have used this material to do the cold air some intake where hot of a bay of engine doesnt taking to a intake. A cold air intake need more than just the dish of metal and to focus of hule. I need to be isolate the engines heat how is known like this hot bleed. I have run the reader of diagnostic in my air intake temp and some does not number any lie. After isolating a intake air temp is gone down significantly for 30-40 terracings. A heat was the side was 71 at the same time so that it was a compatible factor where the air so only can take like this cold how is external in disposal to a intake of course. Global the used this with trying to heat insulation foam to do the real cold air intake and all a difference.
5 / 5
Has done enough the bit to research first to buy this product but man, work. I use it on mine 2011 WRX with the mountain at the head of Perrin intercooler to the equal that has taken quite hot without the only heat drenches of a transmission/of engine, but also hot to Knit. First to use it, touching a piping after running/that it runs a car was the true test of manhood, but with which installation, a test to touch resulted the breeze . He really reduced some levels of temperature of a piping and really adds some bay of good engine bling also. In general, it is quell'has bitten pricey but laws to maintain a intake the freshest pipes for better intake cariche.
5 / 5
This material does not stick . A lot still it adheres his self when it has developed. The cleaner will not help it still does not go to stick.
Another thing is is not fat. Has the one who to the looks to be likes him to him the tape of rock to cover to signal that is the alone edge of fiberglass often glued to a backside of the piece of gold Mylar. Defiantly Any value 40 bucks. I have expected to be buying aluminized fiberglass this was gold in colour and in fact hot of blockade.. Mylar The only works has of the empty of air. Ossia A reason because no in reflector Any heat. There is any empty of air. Ossia The one who a fiberglass is supposition to resupply. But reason there is not quantity a lot appreciable of glass in the does not go to do. No SHABBY!!!!
4 / 5
Remarked the significant drop in temperature of my aluminium intake pipe. A pipe was untouchable after the walk, with one wraps could atleast touch a intake pipe. Doing the coverage of headed has has spent temperatures down significantly once again and now a intake the pipe is warm but no hot. I will consider this wins it considering is proximity the coverage of valve and exhaust manifold.

Easy to install in of the straight sections, very difficult to wrap without wrinkles in upper of welds and curves.
4 / 5
Like this far is a lot pleasing to look in. Any insurance of like this effective is the syet likes the automobile is has reconstructed.

Has applied this to mine intercooler and has used on the majority of this 30' x 2' wrap, which have me like this surprised has not expected he to be finalised so only doing a TMIC 21'x8'x4'. Expected to have much more that I leftover.
I hope there is enough to cover mine disturb hose of has anchored.

Estaca followup Once car in a street.
5 / 5
A lot has been them with some descriptions and leave me to knots down. Im Very conscious of as and reason each surface that touches some needs of tape to be cleaned in the first place and this material has stuck initially but a course of an engine and each piece only have come on like this now does not have any function and looks horrible . Im Going to assume his so only a mine of batch has come from/come from reason knows them the fallen in a minority but there was at all more could them do to say has had them anything to do with him. Too bad has had them big hopes.
4 / 5
After seeing roughly of this material in the fellow Deep car of race of Apt street intake has bought the circle of him to insulate a Weapon R aluminium to cover the manifold of careers in mine supercharged Deep Apt street sleeper.. Reducing air intake helps of temperature partorisca do more power in any engine of the inner combustion and the heat drench is the big question in the tiny 1.5 engine of litre with 10 PSI impulse... Partorisca Verify out of some claims have done roughly Reflect-A-Gold, has used the thermometer of AutoZone an interior of measures and external temperature, the gun of hot and has beaten of fish of empty tuna.. I have situated a sensor of external temperature down one beats and has heated he partorisca 30 seconds that agrees a temperature.. Then with which one can cooled behind down to an environmental temperature, has covered he with Reflecting-A-Gold and has done a same thing.. I can not take some figures esatte but has had 80 difference among a first and second test has treated... I have purchased more than a material to wrap one to and of pipes for the highland advance intercooler will be to install.
5 / 5
Main purpose to apply is was so that it could take a OEM fiberglass the insulator has attached to a hood and an insulator of hule ontop of an engine. It takes these two pieces have augmented an experience of his exponentially.

Volvo Uses the engine to twin touched how is fun really listening a supercharger the trade of wine was to a disturb whoosh around 3500 rpm. I have imagined have take something purposeful would try to substitute he in fashion.
5 / 5
Pending is madness of the cups of virus has been boring and has required something to do has ordered like this this and has wrapped a intake piping of my house ST to create the REAL cold air intake and I gotta says is done decently well. My time of load is spent for the pocolas terracings that, for any car has augmented, is essential. It is quite sticky but can pulls was and substitute it to him required, is also decently easy to form around curves and curves, will not be a more beautiful thing but he will do.
5 / 5
Fantastic thermal barrier. These produced is supposition to prevent heatsoak for esflecting' radiated hot. I have added this to an outside of the mine airbox and in a underside of the mine disturb shield of hot and my IATs has fallen 3-5 terracings while moving, and prevent heatsoak very better when idling in traffic (for roughly 5 minute/of terracings until 25 delta of terracings). To good sure interesting in the vehicle of the induction forced where maintaining the time down helps to maintain horsepower constant.

The day 'normal', my IATs is +7 terracings the environmental (external temperature) of a car is been outfitted. Forward, would be +12-15.
And still after seating in traffic or in stoplights for periods of time, once are that it moves again, will fall to around +10 terracings the environmental and resist in firm.
4 / 5
Any clue in flexibility or of the adhesive properties.
Has bought one 2'x2' spent to dip in mine Hayabusa fairings. I unfolded A spent, has situated my hand in an adhesive side and has resisted the gun of hot 6' is gone in a side of gold. I have had to pull my hand was inner 3 seconds of a heat and I could feel a wind that swipes of a gun of heat was in a setting 'low' for 200 terracings or less.
Could comprise not blocking a wind, but has not blocked any of a heat neither! Felizmente, some vendors are very useful and has finalised to take the full repayment.
4 / 5
To his credit, this material was a lot of and sticky and looked well when it has applied. But, when exposure to heat, so only classifies . It has not melted or take fire, but so only classifies of vaporised and has peeled was. A bit in disappointing. Any outperform your typical aluminium ducting tape that can be found in any tent of hardware.
5 / 5
Tape of quality very big that looks a lot he take your time to apply.
The look adds under a hood and is a tape of the same hot used in the car that circuits of careers and run car builds.
Does not extend but still can be applied around the curves and he look has applied professionally. It sees photo partorisca reference.
Professional quality of the professional company.
4 / 5
Is not gone in a packaging of companies. The trace of wine in the box. Any instruction or spec the discharge or anything likes them concealed. It looked it the be be cut of the main discharge or the circle.

Regarding a product he, is surprising!! Easy to do with,according to odd forms,he backing is easy to locate models of different forms on. It sticks well and if I deceive it to you easily for the on so much can try again. And habladuría in bling!

Dipped it to a test. Has a A/C drain tubes this seats dangerously close to mine aftermarket exhausts. It is a lot of entity that this tube is not melted and can does not relocate. I have wrapped this tube with Reflecting-A-GOLD and installed my exhaust to find that in fact it touches a tube does not want to melt ! I took it temp the reading in one exhausts pipe. It was 460deg. I have measured a temp of a tube has looked for to protect in a estupefaciente 147deg!!! Quell'Concealed will not melt anything but ice cream!!! It would owe that say these WORKS of materials!!! Stray 1 star for an odd packaging any one a product.
5 / 5
Has received so only this today 1/11/19. The container has not been opened this in spite of like this has some staples in of the sides. It looks a glue melted where has been stored. Already feeling nettled of this is not the economic circle to heat reflective tape..
5 / 5
Fantastic thermal barrier. These produced is supposition to prevent heatsoak for esflecting' radiated hot. I have added this to an outside of mine airbox and in a underside of mine disturb shield of heat and mine IATs has fallen 3-5 terracings while moving, and prevent heatsoak very better when idling in traffic (for roughly 5 minute/of terracings until 25 delta of terracings). To good sure interesting in the vehicle of the induction forced where maintaining the time down helps to maintain horsepower constant.

The day 'normal', mine IATs is +7 terracings the environmental (external temperature) of a car is been outfitted. Forward, would be +12-15.
And still after seating in traffic or in stoplights for periods of time, once are that it moves again, will fall to around +8-10 terracings the environmental and resist in firm.

In a semi-detached photo-- has been taken previously to complete one installs (just to give an idea). A small inserts/inserts up was wrapped finally, and when all is reassembled was the box contained (with the lid and all)!
5 / 5
This material has done the world of difference in mine IAT is .It does not squander your time and the money that buys a swipe was material,his any value a material adheres awesome!! I have taken a clean extra step all some surfaces with simple green , first to apply subjects
5 / 5
the compraventa of Absolute must. Mayor downfall to a Gen3 Stillen FALLS in mine V36 G35x was an incredible quantity of heatsoak. A car is noticeably faster after applying this in an upper intake tubes. The adhesion is not partorisca order, but act side if you take the overlap properly. I am blown was that this has helped yard down in mine car heatsoak subject, highly would recommend it to any one.
5 / 5
Has used in the 3d law of printer partorisca retain more than a heat. To good sure can say help the bit, the time is more stable and retains some of a better heat. I have compared prize among a 12x12 spent and a tape, a discharge is slightly overpriced, but perfect for a CR-10S law of printer.
5 / 5
Has has maintained things to take hot but when they take hot can not cool down. Any bandaid to preserve hp. You take a bit defenders, main fmic, the hood has downloaded, or meth injection. HP aint Economic
5 / 5
I seen rasga offs before. But partorisca in $ 50 total tears era. Apresamiento Foil of aluminium out of your draw of cookery, paints it gold and apply clave tak a spay on does not stick to a wall of fire. Then dipped the backside in a box and return it.
5 / 5
My first description was the deception ; it has thought them the revised a material has substituted them this with. Have take this of has done them the bad work that applies it my first time and the cheaped was and has bought another mark. This material is in sure better quality good, sticks better and looks to cost of the extra money. Any one economic was on imitation, so only buy this mark or a equivalen the really better work.
5 / 5
Has ordered this on two occasions by means of Amazon. First time was Amsterdam has done the quality has GIVEN. According to order was Chinese of economic rubbishes done that separated in two. It has not been usable. It would recommend not ordering by means of Amazon, not knowing which will receive. Buying in your tent of part of local car helps to ensure is receiving genuine has GIVEN quality. A second order has taken to the long of the month to receive during one 'crown pandemic'. It is looked with Chinese writing throughout that. Clearly any fact in Amsterdam.
5 / 5
This has done adds!!! It has done a underside of a manifold together with mine FALLS the pipes and he dramatically have fallen a time in a bay of engine. I reccomend this tape to cool need.

Takes your time when applying to do looks like this very like this possible. I will attach photo in the date he late plus.
4 / 5
Like this far, the application was a lot. It does not squander a time and money and take one 30 circle. I have bought one 15 and was juuuust short for a sti intercooler. It could have been my failure but calm will save the little bucks to buy more. oh btw Has GIVEN Rocks 😊
5 / 5
has added this heatwrap to a intake in mine Hellcat, previously in the 80 day saws Intake time of roughly 125-132 and after adding is, am seeing a right time around 118-122 in a same temp days. Any one so only the concealed but a drop to time much faster when that creates to accelerate.
5 / 5
It acts the @subject to cater and use external jockey boxes partorisca touch beer occasionally. Because of a heat, a beer in some lines will take hot, as I have used king of ice cream insulation, wrapped in of the lines of foam, has used then this tape of gold for better insulation. After the day to use an already directed tape untangles it. A lot disappointed in a quality of adhesion. For $ 47, I have expected something concealed would last more than 1 use of days. Estick' With Nashua tape from now on.
5 / 5
One wraps was quite easy to do with,. This material does not have any a lot of elasticity/stretchyness his so much will require to cut thin band for the leave to wrap around outlines without wrinkles.

Has had to that use roughly 1 and !/3 circles of one reflect tape to cover my integer intake pipe to the equal that could wants to order the pair is wrapping the prodigious surface.

I results look well, a tape achieves that it alleges to do and his maintained my intake the pipe cools to a touch with which has has run my car.
5 / 5
This can be bit it pricey but is worth it. It sticks quite easy , is easy to the courses and reflects heats quite well. I have measured to 15 terracing Fahrenheit drop in mine intake temperature to air to wrap a intercooler. For my car ossia the quite big profit this hot time
4 / 5
has data any of term along still but my application was in the coating to powder/has saldado reflow oven. A tape is easy to do with - a crease (of folding and packaging) has has complicated things with some discharges. The external time is down, in the action has improved, and a tape is still where has situated the.
4 / 5
Has had to that reflect the gold in some tanks of finals of mine stock intercooler for the year now. Place simply, work. This tape is especially effective in a disturb side, as so only takes to roughly on lukewarm same after hard daily behaviour. No too hot to a touch in any side of your hand. A throttle the stays lateralmente was fresher that that consistently. I have had included enough it has left it on to line a underside of the grimmspeed shield of heat! To good sure the good mod to the tide in boxes you upgrade to the big plus intercooler, in the chance will repurchase to apply the hips. Highly recommended!
4 / 5
A gold any only look well, but do really a lot also. It has dipped this in an interior of the mine hood of edge of the carbon to the along in fact the month. Has the supercharger that takes really hot and this material protects my hood. Material adds.
5 / 5
Comes with abundance of material to wrap ram cut intakes. Any súper easy to use but the side a difference when driving. Probably it has to that of comprised some tips to help this in spite of. It installs taken awhile to complete.
5 / 5
Sometimes comes on, like this adhesive is not like this strong to the equal that could be but these works of product. I have wrapped my intake with this foil(after applying the thin discharge of Súper-77 adhesive spray) and has seen my IAT drop 15° that was it a leading day.
5 / 5
These tapes are expensive, and can be tried to try and go for this economic material, but those are duct tape with foil of gold on, and will not be to a heat and adhesive will fail. Ossia In fact my second compraventa and one has had in an old car has not failed, has maintained on adds for 6 month. Hopefully This hard while those some
5 / 5
I my intakes with east, I he mainly partorisca looks, but there is remarked less heat under a hood, could be so only me, but would buy again. Car is the q50
4 / 5
Used partorisca cover my casserole of oil and box of air in mine 2014 Subaru BRZ. Apresamiento Has measured before ordering or calm wind on those order again. You plough a container and think 'wow, this goes partorisca be spare' and can still wind on just shy. With my Subaru, my exhaust careers of the manifold extremely closes to my casserole of oil. I do not have any quantifiable data, has seen this in spite of the reduction of time of oil of of the this is to be install.
4 / 5
Wow I had bought this exact mark, has run out of him on my project, bought more and a quality is rubbishes . First order has done adds! Stuck and is remained . This material hardly can stick to and does not remain has to that paste partorisca use so only partorisca the take to remain .
4 / 5
Wishes this material has not been like this expensive, work very partorisca small material, has resisted until the headed exhausting in the car has followed.
4 / 5
Has bought a product because of airing augmented intake time in my Audios S4. Read some descriptions in a poor adhesion but decided to take it casualidad on that. Some separates situated to the tape on was cleansed and degreased previously to apply a product. A tape has been anyway. With which a walk come from, the multiple zone of a tape has moved and slid was. Any glue anything. The mine has covered separates like ridiculous lol - embarrassing.

With considerations to heat protect, my registers before and with which has aimed any decrease in time

No satisfied and would not buy again.
4 / 5
Has GIVEN Always quality of action and notch upper! Addition that protects required and the looks adds also!
4 / 5
Well, This material was awesome for a first pair of days. You grieve an air takes any class of moisture and the humidity is roughly, this tape loses his capacity to stick. I have GIVEN it is doing with me on the solution, but like this of now is not doing with a humidity unfortunately.
4 / 5
Has bought this together with to 12 thumb for 12 piece of thumb of steel of stainless dish the rivit in an inferior side of a hood in a aftermarket disturb has on dipped. Really it reflects good heat. My consultor is not still to drill by means of a material, instead so only poke the hole by means of or cut with the leaf of knife. A marerial entirely dulled and there is ruined the a lot of Milliwakee the hammer has bitten that it has used them. If anything concealed is the testimate his force!
4 / 5
Like this for a prize. I have had the few zones that is coming free of heat and vibration, but these zones have not peeled for behind far. In general, good value for a prize.
4 / 5
Looks well. Idk Has not had Never the occasion to verify if a temperature has improved
5 / 5
Looks to be that his for now. I will inform behind in month.

Top Customer Reviews: Walker 53539 ...

Rating: 4 out of 5 with 29 ratings
5 / 5
I add it exhausts tube. 27.5' Very time. A flared final, quite 4' very time, is 2.5' GO and a rest of a tube is 2.5' OD. The arrival is aluminised armour plate what welds easily and controls up against a salt of elements/of the good winter.
4 / 5
Well piece Of tube. Only an adhesive in a half. The only complaint is that in a flared to the final has the very small ding so has to when being aplanado before it returns in or another tube.
5 / 5
Shipped forms the good sake. It IS quite thin for Half the welding but he melt it weld cold. Only it has to grind afterwards. I have done the turbo the low tube and one exhausts out of the east and the law adds. All prenden less than 50 bucks.
1 / 5
Any one very shipping very dulcemente very half your time
2 / 5
The tubes enter regular boxes, not deadening or anything to protect them during traffic. The tubes more probably enter all angled up and unusable unless has the expander to tube the handy tool in re-form some finals. Well Produced robust otherwise, the tubes come with adhesives and focus in the but the burn was over time.
5 / 5
Cheap but effective. If you want the elegant work, go in the tent. Only it take it this he so that it can spend the inspection of security to Knit and has the right tube in mine '92 f250 7.3 idi. miiiint
5 / 5
Only what an orderly external mechanic and has not had to go in a muffler tent.
3 / 5
Required an extra piece of paralizaciones partorisca of the new exhausts installed in mine Mustang and has verified everywhere neither has has wanted to me touch an arm and the leg or has had so only 6 or 8 period of Feet, but this was exactly that has required, the upper quality separates concealed has been rid a day with which ordered it, and partorisca the cup was, was down $ 10, the nave has comprised. The AMAZON has TRIED STILL AGAIN partorisca BE The 1st And ONLY PLACE partorisca GO to TAKE THAT REQUIRE ECONOMIC, QUICKLY, And IN MARCOS HE the ATTENTIVE NEW CONDITION that TAKES BUT SELDOM RECEIVES partorisca GO ELSEWHERE!!!
SURE WANTS TO ME A bit AMAZON, & YES ADD in mine FIRST PROFITS INSTANTLY SEAT, LIKE the BAND of the 90 'BUSH' DIPPED L....'ALL is ZEN '
5 / 5
the mine has arrived also dented and like this was-of-net in a flared end. For my application has not required a clave and the cut that have been. But you recommend having the tailpipe expand in chance that - an economic expanders is meaning so only to restore the pipe dented the round in all the chance. A coating dips on the small fight when welding - for the better results grind is gone in a weld zone before it solders.
5 / 5
Adds exhausts pipe. 27.5' Long. A flared end, roughly 4' long, is 2.5' GO and a rest of a pipe is 2.5' OD. The arrival is aluminized armour plate the one who welds easily and controls on against a salt of elements/of the good winter.
5 / 5
Economic but effective. If it love the elegant work, goes to the tent. So only it take this he so that it can spend the inspection of security to Knit and have the straight pipe in mine '92 f250 7.3 idi. 👌miiiint
5 / 5
Adding the dual in muffler to the mine Ford Browser 5.0 to the equal that have required two of these pipes. The prizes add, better that any in prize of tent of the car in my zone.
These pipes will do perfectly. They are to the solid build with one finalises that easily slides to him
2 1/2 diameter muffler pipes of has anchored.
4 / 5
The dimensions have listed is smaller the one who that has looked in fact. This there has been the time of empty when jointing until mine muffler. It was able of the work but a lot really suggest this for the first timer. For a prize you kinda take which pays stops.
4 / 5
So only the one who an external mechanic ordered and there is not had to that go to a muffler tent.
5 / 5
Has shipped in shape good beautiful. It is quite thin for Mig the welding but melt it weld cold. So only it has to that grind afterwards. I have done it I disturb down the pipe and an exhaust out of the this and the work adds. All takes less than 50 bucks.
5 / 5
Has used like this extension after cutting was some work in fact of terrible welding for local mexican muffler tent. With Walker muffler, band clamps and exhaust cement all has come near to the equal that have to that. It recommends!
5 / 5
Has done perfectly to go of muffler to H Pipe in mine foxbody mustang. Remained with joint of butt clamps this work adds! Bought 2 and perfect is returned any fraction the arrival.
4 / 5
Well chunk of pipe. So only a sticker in a half. The only complaint is that in a flared end there is the very small ding so much has to that be aplanado before it returns in another pipe.
5 / 5
Returns perfectly, touches well with new muffler. I wish a costruttore would dip glue in of the stickers this in spite of, those have taken the few days the burn was!!
4 / 5
The stickers sucked partorisca try to take, has had likes 3 big some concealed would not exit
5 / 5
the fact adds in my Jeep WJ exhaust mods. Welded On easily and was the prize adds!
5 / 5
Unusable junk So much the sides are broken I can a lot of anything with him.
4 / 5
Was that it has required them the compleat exhausts work in mine 5 litre
5 / 5
The pipes go in regular box, not cushioning or anything partorisca protect them during traffic. Pipes more probably go in all has bent up and unusable unless the the pipe expand the handy tool to king-form some finals. A lot sturdy produced otherwise, pipes to come with the stickers and to focus in his burn of May was over time.
5 / 5
Liked that they were of new but both pipes have had the good measure ding partorisca be launched but will do
4 / 5
the sounds add and has been said by a mechanic that has taken the prize adds
5 / 5
Taken a work done. It is the piece of 2.5' OD tubing, with the section has expanded that is 2.5' GO. Good access and welds amiably.
5 / 5
Arrived with both open ends dented. Do coupling pipe to the impossible new pipes. I owe that hammer a his backside ready before that can use. It was it returned, but have required he partorisca the like this collected reparation to the equal that was possible.

The nave was punctually.
5 / 5
24 thumbs and 2.5 diameter .. It has taken clash was reason the cut of end is a bit sloppy

Top Customer Reviews: Design Engineering ...

Rating: 4 out of 5 with 57 ratings
5 / 5
It produces very well, in fact it has it roughly thickness in him.

Has used this to embroil anything concealed has taken the bit closes in the set of header of long tube, comprising lines of brake, capes, fluent lines, electrical capes, and my steering axis.

Has found has not gone enough so sticky while it would have liked him, even so using of the set of stainless zipties done the good work to prevent he to exit.
5 / 5
Quota of Heat of big quality the resistant tape has been installed in a wall of fire by behind a woman Polaris the chair of the The, to reduce heat by behind the chair of the operator.
Withstands 2000F radiant heat, Flexible and easy to apply, Strong self-the adhesive that backwards,Sure and poster of focus, boxes of air of focus he and more....
Fast nave...
5 / 5
I have used this to isolate mine 06 S2000 stock airbox with utmost results. I have isolated only a intake tube and a cup of a airbox and has seen the reduction of Temperatures of Intake of Air of 2-5 titles Fahrenheit in pause and go traffic; environmental time among 65-80 titles Fahrenheit.
Will be to isolate a rest of a airbox in some approximations the futures and am expecting to see even more reduction of temperature.
Recommends this product in any concealed wants to reduce the heat of engine drenches.
2 / 5
I have purchased this tape to protect the backside hitch the bicycle is trace racks of a heat that comes from/comes from a vehicle exhausts. Mate very well, better concealed and has expected. Alas a control of heat was minimum in better- a tape has turned black and was totally scorched in a first use.
5 / 5
He cual announced, although some of some anterior complaints apply (any sper sticky), etc. Has used the for prender heat of my new big wattage has DIRECTED clear system for my aquarium to transfer in a hood of the aquarium of forest has connected the in. The tape was perfect for this application.
5 / 5
The environmental test has directed, 400 upto 1000 title F My self before install in an engine of Diesel RV. The glue melted but a foil any same loose is resplandor . That is to say sure next heat to extreme .
2 / 5
This element is durable and thickness. But a self the adhesive part is questionable. Has a bit of the glue in a backside, but no good bond. I have had to to use clamps of hose to line he in place.
4 / 5
My purpose for this compraventa was to install he in Harley is some background chairs in an endeavour to deflect some of a heat of engine. A tape is thin which he easy to do the clean sake installs. I am not sure if a material a fat plus would do better for east or the no. Can say that it is doing sure and has thought included quite that does the second cloak to see yes helps even more.
5 / 5
I have used this tape to seal a seams after I have installed a background Tunnel of Engineering and of Shield to draw in my tunnel of transmission. A tape was easy to do with and was sticky abundance to take a work has done. I expect an adhesive support a test of time, will see.
5 / 5
Used the to embroil the line of the fuel of the metal in firm in the tube of row. It adheres well afterwards clean a line of fuel. The time will say reduces a temperature of fuel in a line and remains durable. I have applied double cloaks.
4 / 5
My purpose partorisca this compraventa was partorisca install to a fund of Harley chair in an endeavour to deflect some of a heat of engine. A tape is thin which he easy to do the good net installs. I am not sure if a material a fat plus would do better partorisca east or the no. can say that it is doing sure and has thought included roughly doing the second spent partorisca see yes helps even more.
5 / 5
Has used this tape partorisca seal a seams with which have installed a Tunnel partorisca Walk of Engineering & of Shield to draw in my tunnel of transmission. A tape was easy to do with and was sticky abundance partorisca take a work done. Appearance an adhesive stand a test of time, will see.
5 / 5
Claves of excellent product almost too well especially to the his self def buy again and highly recommends. I have used this in a LS stand to exchange harness only I built and looks better that a material of factory has taken was and the law adds
4 / 5
Used it to wrap the line of fuel of the metal in firm to the pipe of row. It adheres well after cleaning a line of fuel. The time will say reduces a temperature of fuel in a line and remains durable. I have applied spent double.
4 / 5
Directly out of a packaging, with a backing take, does not stick to anything at all. It has cleaned it surfaces. Metal. Plastic. At all. Squandered stirs It of this material and has included tried to stick in my hands, swimming.
5 / 5
Used it to repair a cup of the caffè roaster (that takes really hot) after several types of glue have failed. A tape is súper adhesive and in fact resists heat. Good product!
5 / 5
Adheres enough very which adds, but has begun to degrade that it assumes is hot, water, and film of street to drive in one rains that I the plot. Can try it again, but I am not sure like this first it can look for the product of better quality. I stick to to follow it up I find something more.
4 / 5
Has used this to wrap a tube in my Cold Air Intake, which is done of metal. This was a perfect period for the discharge . It looks to take well and feels fresh to a touch.
5 / 5
Has dipped this tape around the work has had in the muffler pipe and he no last 20 days before was has come entirely there is decayed was the think that was for real the waste of money
4 / 5
the adhesion is a lot of subpar, straps of bond of the use.

Is too thin for any control of significant heat. So only 2 terracings F Drop in of the effects of radiant temperature in mine intake piping.

My joint, takes something more like this the product is way too thin to be for real impactful.
4 / 5
The heat adds resistant tape, used it on my K&N air of the ram and he have helped partorisca fall an inner air temp of mine intake for on 15° is to very good compraventa!
5 / 5
Does not agree when I have bought he more than fact three years and bud storage with hot Clement and a lot working still. Good product
Thank you.
5 / 5
Would say that a tape needs the fire decal in the but does not have to that worry, in fact takes fire how is everything well. I have verified a thermal control of this tape and how was partorisca be using he with era the plenary 350 terracings under his max. So only you recommend that a tape is down 200 terracings.
4 / 5
If you are the patient person , can do a bit amazing material with this tape. I have covered each no-zone of flow of the mine intercooler with him, and an impact in heatsoak is dramatic. It does not look to like is that sticky when you are by train for the apply, but is been on for the few months now and there is no budged.
5 / 5
Has bought for the stove of pellet is doing adds like this far almost the whole winter
5 / 5
Good value for a money. Wrapped some snowmobile hoses with this tape.
5 / 5
Looks ordered and the law adds.
Protects a harness to exhaust hot, which is covered to exhaust also wrap. You go back to change a description if anything goes bad down a line.
5 / 5
My oil takes can usually would take súper in of the hot llamas to a touch after each walk. I have applied of then two discharges of of the east his material, is state noticeable the freshest way. No longer súper the heat that drenches in of the hot llamas.
5 / 5
The product adds like this announced act perfectly and the looks adds will buy again
4 / 5
Excellent adhesive. I have wrapped the boss that goes near of a muffler and conversor catalytic, has not experienced any smell in of the plastic llamas as it looks to be working
4 / 5
Purchased this heat by heart of the money reflective tape partorisca fix two busted intake house in mine car this there has been has has developed holes and of the cracks been due to heat. A prize for each intake the hose is $ 80 and has two of them he so that it is quite of the money to substitute them and can suffer some same consequences down a street. As it has bought this tape to wrap some plastic part of some hoses and layer some holes. In general, a tape is resisting on really well for the month now and remark better airflow and throttle answered as well as my gas mileage is returned the normal when before it suffer for one or two mpg. I have used a whole circle and he has not gone enough for my application how has been advance and has bought one 30 circle of feet also.
5 / 5
Quota of Heat of big quality the resistant tape has been installed in a wall of fire for behind a woman Polaris the chair of the The, to reduce heat for behind the chair of the operator.
Withstands 2000°F radiant heat, Flexible and easy to apply, Strong self-adhesive backing,Sure and poster of focus, boxes of air of focus he and more....
Fast nave...
4 / 5
Has purchased this heat by heart of the money reflective tape to fix two busted intake wife in mine car this there has been has has developed holes and of the cracks been due to heat. A prize for each intake the hose is $ 80 and has two of them he so that it is quite of the money to substitute them and can suffer some same consequences down a street. As it has bought this tape to wrap some plastic part of some hoses and layer some holes. In general, a tape is resisting on really well for the month now and remark better airflow and throttle answered as well as my gas mileage is returned the normal when before it suffer for one or two mpg.
5 / 5
Produces a lot well, in fact there is roughly his thickness.

Has used this to wrap anything concealed has taken the bit closes to the together of headed of tube along, comprising lines of brake, bosses, fluent lines, electrical bosses, and my steering iron.

Has found has not been enough like this sticky as it would have liked him, this in spite of using of the together of stainless zipties done the good work to prevent he to exit.
4 / 5
Does like this announced, although some of some leading complaints apply (any súper sticky), etc. has used He to take heat of the mine new big wattage has DIRECTED light system for my aquarium to transfer to a hood of the aquarium of forest connected them to. The tape was perfect for this application.
5 / 5
Has used this the insulate mine 06 S2000 stock airbox with utmost results. Have So only insulated a intake tubing and a cup of a airbox and has seen the reduction of Intake Temperatures of Air of 2-5 terracings Fahrenheit in stop and go traffic; environmental time among 65-80 terracings Fahrenheit.
Will be that it isolates a rest of a airbox in the near future and am expecting to see even more reduction of temperature.
Recommends this product to any any one reduces the heat of engine drenches.
4 / 5
Has purchased this tape to protect the backside hitch the trace of storm of the bicycle of a heat that comes from/comes from a vehicle exhausts. Estaca A lot well, better that has been expecting them. Unfortunately a control of heat was minimum in better- a tape has turned black and was entirely scorched in a first use.
4 / 5
Has directed environmental test, 400 upto 1000 terracing F My self first to install in an engine of Diesel RV. The glue melted but a foil any included free is resplandor . Ossia Sure hot extreme prójimo .
5 / 5
Has cleaned my intake with more cleaned of brake. Left the dry and tried to adhere this his tape. Has terrible adhesion (has been expecting them duct adhesion of level of the tape). I have done a tape the plot to do it clave while applying and has thought he workz a surface was slightly porous. In 1 short walk all of tape has begun to peel. Have take in fear of him taking stuck in some pulleys. Ossia The waste of money.
5 / 5
This element is durable and thickness. But a self adhesive part is questionable. There is a bit of the glue in a backside, but does not stick well. I have had to that use hose clamps to resist he in place.
5 / 5
Used the in dynamat near in mine Rv house of dog. Fact perfectly
5 / 5
Partorisca me didnot work. Didnot Partorisca A heat

Too expensive also , no

Too thin
4 / 5
A glue sucks, but resists up and maintains things quite fresh.
4 / 5
A bit expensive but works very like this cost the mine.
5 / 5
Looks a thing that loses here is calling the tape would expect it to be sticky..
5 / 5
This my first critical negation... This simple tape does not resist on down hot. They are by train to use it Down a hood of the G37 calm on roughly intake on and other locations. Every time I open a hood is peeling is gone in each location has been has applied. I have tried several times to animal-apply without any success... Absolute junk, tape of duck probably controls on better...
4 / 5
Using this to wrap a intake system for my car. Driving a RX8 some down the times of hood take quite toasty like the periodic engine that takes quite hot for his measure. Of then I the plot of autocross my main worry was heatsoak after installing a intake system. To wrap a intake in a Fresh Tap has found that my IAT is has fallen legitimately compared to another autocross days with alike time. It is the economic way , fast to protect an air that is fed to your engine.
4 / 5
Used it the insulate line of fuel , has gone concludes of steam .
4 / 5
Has used this heat shielded tape to wrap transports the electrical bosses under a hood approach a radiator. Good works.
4 / 5
Saved to buy the hole of new fire... It uses it to joint of the fire of the tape has jointed. The work adds
4 / 5
Works very a lot calm it sobres he so that it adheres his or yes used in smooth clean surface. I have required partorisca repair the rusty Ford old muffler, cleaned it a more could without investing to long in him. A tape has on resisted in some a lot good zones, in another he so only pealed on and result rigid.
5 / 5
Does not do like this announced that. It has dipped in in the hose grieves to take melted was.
5 / 5
A tape would not stick to some surfaces that applied it to. It can be a surface has used?
5 / 5
Has used he in mine car AC the tubes take much fresher.
4 / 5
Has used to cool down an interior of the mine Polaris general. The works cost and looks to be that they stick quite good. There is remarked some flanges that peel on the bit and expected it would do the main difference but I probably required more.
4 / 5
This material work quite good. It feels flimsy, but is quite strong and can not be rasgado manually. The utilisation to wrap my cold air intake tube with insulation, as any heat taking. Continuous stick well under conditions of heat of the engine.
5 / 5
The work adds. It produces used to ensure tram out of RZR exhaust.

Top Customer Reviews: Walker 35337 ...

Rating: 4 out of 5 with 41 ratings
5 / 5
Sound the clamp. He clamps. Clamped My muffler in my resonator .... 5/5 clampey Stars.
5 / 5
These have done utmost for one installs of my muffler and tailpipe good quality, the only thing has been ordered two of them and one of them has been missing some nuts but no the big roads there has been some extras ones in my proportionate nuts and rays. The only thing was lock of advertising washers to do sure that some nuts would not come calm loose, he so that it has remained far in place without subjects
5 / 5
This clamp remember me days when breakings of tents of car tents of the part of the cart looked and a type by behind a counter has known as to build the engine. Seriously, this clamp the basses of utmost bites for a money and looks to have good quality by behind the. To well sure buy it again.
5 / 5
For a prize, really can any gone bad with east. It researches to be the good quality and all the thread in just sake. This 35337 model is for 2-1/2' to the tubes like them be conscious only of that.
3 / 5
These clamps is very only. The ready amazon what Walker marks but one measures ordered where some any mark by name. It IS one exhausts the clamp and a prize was cheap quite so a lot very preoccupy me. Some of them have been missing some nuts but this was been due to poor band.
4 / 5
It IS your way to exhaust the clamp has ordered 3 of has taken clashes was so that one has been missing is nuts a box has been opened and was has touched entered a envelope of the paper was mailed in that had the hole in a corner would suppose is fallen out of.
5 / 5
Easy directions, perfect access. def Control out of a schematic of his web of place even so. We require 2 of the concrete measure and this unit would not have known w/checked schematic.
5 / 5
They are to exhaust clamps like any a lot of to say enough the Mays did with Walker tailpipe bought and was only the small extra of dollars. It takes The little of these is doing any class to exhaust work to save you the trip in Napa or Zone of Cart.
5 / 5
His one exhausts the clamp done a work for cheap. The work and any nude was likes him the sound takes to give he less than 5 stars
5 / 5
OEM SPLIT FOR WALKER 2 1/2' MUFFLER FLANGES. The fact adds and fast.
4 / 5
Easy directions, perfect access. def Control out of a schematic of his web of place this in spite of. We require 2 of the concrete measure and this one. It have not known w/verified schematic.
5 / 5
Good part partorisca use when calm your own muffler work. It civilises of terrible turn. Mark sure order exactly like the calm quota like this precise
5 / 5
has ordered three of these clamps and look partorisca do well. It take the warm feeling when a box has said done in some the EUA, until I have found one of a clamps has been missing the die. I a lot annoying when have release it exhausts system in yours automobile and has to that use more is partorisca go to a tent of hardware partorisca buy a stupid die.
4 / 5
Quite flimsy clamp. While trying apretarprpers down some dice are spent for in front some edges and has taken stuck and has had to cut it was. You do not recommend .
4 / 5
This muffler clamp fact my complete life. My acne has on cleared and my hound the dog is coming house .
5 / 5
Fast shipment the works of Sound would buy again Can not beat a prize
4 / 5
Shipped extremely fast and has arrived exactly like this described these exhaust clamps is the @@subject the economic plus will find but is still there is well does
4 / 5
has ordered 4 or a clamps and A clamps apt all went in him but an edge on all the world was all messed on way that could not take the die on like this in general no
5 / 5
that it says in one beats, as to speak. Any @@subject or has surprised.
5 / 5
Sound the clamp. He clamps. Clamped My muffler to the mine resonator .... 5/5 clampey Stars.
5 / 5
These have done utmost partorisca one installs of the mine muffler and tailpipe good quality, the only thing has been he has ordered two of them and one of them has been missing some dice but does not treat it big has had any extra some in my dice resupplied and rays. The only thing was lock of ad washers partorisca do sure that some dice would not come calm loose, he so that it is remained far in place without subject
4 / 5
Partorisca a prize, really can any gone bad with east. It looks partorisca be good quality and all the edges in just well. This 35337 model is partorisca 2-1/2' pipes so only be conscious of that.
4 / 5
The quality adds vendor of durable product and the hands quickly add highly recommend this calm product will not be disappointed awesome prize also!
5 / 5
Some straps of steel have broken in mine dual exhausts partorisca have used like this 2 of these and torqued down some dice. More exhausts partorisca shake or taking prójimo to a bumper
5 / 5
This clamp agree me days when it splits of tents of car tents of part of alike car and a type for behind a counter has known like partorisca build the engine. Seriously, this clamp the down utmost bites partorisca of the money and looks partorisca have good quality for behind the. To good sure buy again.
4 / 5
Is your half to exhaust clamp has ordered 3 of them have taken clashes was reason one has been missing is given a box was opened and was touched is gone in a paper envelope was mailed in that had the hole in a corner would assume has fallen went.
4 / 5
These clamps is so only well. The amazon to his ready likes them Walker of the frames but an orderly measure where some any mark of name. It is an exhaust clamp and a prize was economic quite like this really has not concerned me. Some of them have been missing some dice but that has been due to poor packing.
4 / 5
Is muffler clamp, works to the equal that has expected. There have it really any one a lot to them the dice of pair the or-shaped class of ray of what and a part of bar that presiona some dice on.
4 / 5
Has required this Clamp to repair my broken exhausts. A quality of a product is Utmost 👌.
Returns my need and he well each penny. It is more economic that any of some local tents.
And arrived in 2days.
4 / 5
It buys him again it has required . The prize was very also.
4 / 5
Access 2 1/2 thumb exhausts pipe perfectly. Used partorisca attach muffler. Any leak any subject.
4 / 5
A threaded side has them has had to that retread like the ray will go in ,the another a snapped of
4 / 5
Big clamp, any a lot of uses partorisca levels muffler reparations
4 / 5
OEM LEFT PARTORISCA WALKER 2 1/2' MUFFLER FLANGES. The fact adds and fast.
4 / 5
Has ordered 2 of these clamps, so much desquels is unusable. Some edges look terrible and does not line up with an another. I have looked for to use the data partorisca fix them up but is like this bad not even that it can spend behind the life.
4 / 5
The product listed as 'ACCESS in your VEHICLE' has entered after specifications. Well, he NO! Now they are not to the left return it!!!
4 / 5
Is exhausts clamps like any a lot of to say roughly his May have done with Walker tailpipe bought and was so only the little extra of dollars. Grab The little of these yes is doing any class partorisca exhaust work partorisca save calm the travesía the Napa or Zone of Car.
4 / 5
It is the muffler clamp, law like his supposition the
5 / 5
Demand partorisca be walker but was some Mark of name I never listened of the his all some same tho and the value compraventa
4 / 5
has loved the rubbishes done cheaply could go anywhere.
Am ailing of not taking that it has ordered !!!!
5 / 5
Torsion dowm . Any worry of metal or the ray or the edges that do lacking. The time and the heat will say a truth


Related YouTube Video: