Trending Desoldering Pumps Products

What is Desoldering Pumps?


Top Customer Reviews: TABIGER Desoldering ...

Rating: 4 out of 5 with 20 ratings
5 / 5
Any one very require a desoldering bombs, but neither has required three spoos of wick, which was one another option expsita at the same time, more than the east was cheaper... As I have imagined, I'l advanced and take a one with some bombs... A wick is perfect, and if it has not used never is for desoldering... It IS the must has. Some bombs law well, and is well to take a big plus globs to solder around through-pins. It IS the good value for a money.
5 / 5
He the advertising has announced, has built a marshall clone amp which has required in totally take eschew and reconstruct. I have used only one of some pistols and quite a lot of 10 inches of a wick to take each a sald. I prefer a pistol for more each a wick the handy wine when required to clean up solder of a backside some pots.
1 / 5
Desoldering The bomb is hard to line and suck sald a same time.
Has tried to have more help me but very hard to time a suck and a melted sald. The trigger is to take and is not easy or hurriedly with or book with work in firm.
3 / 5
I am giving of it is the half of a description of career so that they can any one when being pas doing all that add because of error of operator. I have not had to solder in the number of years so many is the small rusty. This be has said, actuate never desoldered anything. A desoldering to beat of bombs that is too big in a tip but I poden any sure when being; it is quite 1mm in diameter. A desoldering wicks does a bit; I can any one when not being using flow quite additional to suck in an old/excess sald (likes him see in of the videos of Youtube).
3 / 5
I am beginning to repair stompboxes for electrical guitars, modding the, components of builds and some joints, and another diy the material of electronic musician likes reparation and assembly. If calm only is taking in a habit, likes him was could be it has tried to buy this. And for everything means I very wanted to some bombs in the first place, is quite easy to use and suck in the surplus sald well. But the calm will not be able to take everything with just some bombs, means to take the majority of him. But choose in different sald plait/wick so that a material this comes with mamma hella bad. Has thinks that that it use it erroneously, perhaps is dish of only mine to solder, but is hella the doubting.

Probably to the better shit there yes is looking for something finishes main, or professional tier, but if you are not looking to invert strongly, some bombs take a work done by basic diy solder.
4 / 5
Received Hurriedly of Amazon. The prize adds for 3 pieces. It requires 3 tips to cause melt and clog up very hurriedly. It does not know it can order only some tips.
5 / 5
It avenges punctually, used for joint of circuit in car , tool very well, easy to use, well to solder works
5 / 5
Works while it has to. It take to take averts to clean out of a surplus sald to residue like him some laws of the better suction.
5 / 5
It IS it returned cuz has not required he - the good looked tho for a money.
5 / 5
It can any one in that has it desoldered the joint of circuit without him! It recommends!
4 / 5
Partorisca Years and of the years saldados circuits of electrical guitar without the desoldering braid or soldersucker. I am not sure as it has lived without these paralizaciones almost 25 years. Value each penny!

Regarding a quality of a product; it looks very done and would have to that last the very long time.
4 / 5
Has saldado The tip of sucker is way too wide and so that I have used for (substituting transmissions of key of the mouse in Logitech M570) and could do not taking to do focus for vacuum to do. It can be he fences in if the tip was much smaller. I never seen the solder sucker with such the wide tip in 25+ years has done like electronic technology. A tip is looks like this wide the one who remain afterwards cutting of an end of the normal tip. If you look in some photos can see a tip is the tube without any narrowing in an end. A solder wick resembles not having any flow in him and so only a lot of wick on any solder. Adding rosin the core has saldado to nail and to a wick after several tentativas was finally able to take solder the wick. Better buy some the liquid flows that plan on using this solder wick.

Would not buy again or recommend this to any one.
4 / 5
No really need a desoldering bombs, but neither has required three spoos of wick, which was another option has found at the same time, more is was more economic... As I have imagined, I'l goes advance and take a one with some bombs... A wick is perfect, and yes calms has not used never is for desoldering... It is the must has. Some bombs law well, and is well to take a big plus globs to solder around by means of-pins. It is the good value for a money.
4 / 5
Wow! That the prize adds thus combo set! It can not find this value dipped in ebay or more where!
I amour that takes 3 pens of suction !
Surprisingly, well has built... doesnt Looks his in disposal to break the day or two!
A wick is the good addition to this combo, tiny and pleasant box is in, access anywhere!

A lot, very good!
4 / 5
The ad has announced, has built a marshall clone amp which have required to entirely take avert and reconstruct. I have used so only one of some guns and roughly 10 thumbs of a wick to take all a soldering. I prefer a gun for more all a wick is coming handy when I have required to clean on soldering of a backside of some pots.
5 / 5
Am giving is the half of a description of career because they can not be doing all these utmost because of error of operator. I have not had to solder in the number of years so many are the little rusty. This be has said, have never desoldered anything. A desoldering the bombs can be too big in a tip but I can not be sure; it is roughly 1mm in diameter. A desoldering wicks does a bit; I can not be using flow quite additional to suck on an old/excess has saldado (likes to see in of the video of Youtube).
4 / 5
Desoldering The bomb is hard to resist and suck solder a same time.
Has looked for to have more help me but a lot last to time a sucking and a melted has saldado. The trigger is hard and is not easy or quickly with a delivery with work in bylines.
4 / 5
Are new to solder, as I have loved to try both a braid and method of suction. This in spite of, included after reading on on like this to use a braid and looking some video, could do not taking to do. So only it heats up and hot on, without wicking on a solder.

A bomb of suction has done well, this in spite of. It is not súper strong but that the suffices thinks. Usually it ejects an old has saldado, but once has has had to that the take averts to empty the.

Has done so that I required it to do.
5 / 5
A tube of aluminium is quite thin, and any 100 line up with a blue plastic backside. Also I have doubts in an aim of plastic boss that last in a face of heavy use. This in spite of, a fact that takes three of them, and that an action of cradle is of confidence this the compraventa well for any one looking for the economic, but effective bomb. Also, there is less wick that looks in the each circle, as be conscious that a main value of this compraventa is in some bombs.
5 / 5
A tip has walls the width of has bitten to take on pins of DIVING easily, a suction is decent if a tip is perfectly flat in a joint and a tip is not too be mishappen to take hot of looks to be plastic. A wick the law yes adds flow, but extracted bad without him. Still it can take a work done, but so only takes more work. If that does the plot of desoldering, he desoldering the canal would be the must

Top Customer Reviews: Solder Sucker- ...

Rating: 4 out of 5 with 50 ratings
5 / 5
If it had looked more afterwards in a picture of a tool, probably would have of an upper half of an organism is plastic, any metal. Knowing that, would not have purchased a product. A question is that a plastic upper portion of a tool attaches to a low half metal saws superficial edges , finals. Every time a cradle is released, some slams of plunger to an upper half of a tool, stressing some edges. With using repeated, of the games of the edges and a tool is no longer useful. Your frequency of use will determine if a durability of a tool is the question partorisca you. Partorisca me, has based on experience with the tool of look of way has built, the durability is the worry . An alternative is partorisca buy the tool in those both halves are built of metal. An all the tool of metal was lasted roughly 10 first years of a key of plastic trigger finally succumbed to an accident repeated of a cradle/of plunger.

A tool is quite economic that will not return it , but will be more cautious when it orders his substitution.
5 / 5
While this has done well initially can not recommend this to any more. I have used this to help tones of substitute in the keyboard maquinal. Before it was still halfway done some edges in a cup undressed was and has caused an upper to burst was when quell'using. I took it so only it averts two times, when I took it in the first place and once for the cleaned was while soldering. Both times any I in the invernadero. As it used it I have seen a short begins to separate of a white tube of a force of a plunger and finally this has done he unusable.
4 / 5
This has saldado the windy is useless. When you Pull a plunger down to rooster he, begins to leave in 2 in some edges. When you Press a key to release some leaves of plunger entirely for the half of a force and a cradle goes to fly by means of a room. Perhaps the trick of fresh party, any gain for any real work.
4 / 5
Of confidence, compact, economic. I do not see any way of the improve. There exist some very big has saldado suck equivalent partorisca around $ 30; I used him and they some same excepts in heavy copper thermals where his perfrom slightly better reasons his big measure leaves the volume More adds them to air to be sucked. The this in spite of prefers these small units reasons some big some cost the plot of spatial of bank (roughly 12 thumbs long!) And this small has saldado the windy is easier that situate with accuracy around components.
5 / 5
When I Have been to use a solder sucker an end, where was screwed on, is fallen off. I have had to wrap electrical tape around the to resist he in place. Some edges were bad this has resisted an end on where cleaned out of an old has saldado. More than that, has done well. I think a company that is selling this element would be necessary to send me the new a.
4 / 5
Has taken this to help with an obvious @@subject -- the mine that solders is not glorious and sometimes take bit it too much in my work. It times also when they are of-soldering the component and has need to clean on the earliest traces and blobs. Ossia The simple mechanical plunger that does this a lot of well. You depress a plunger against an inner cradle until he latches; dipped a nib to better effect approaches a liquid has saldado; then press a black key to release a plunger and take a solder. Pfft! Any blob. A solder is dispersed inside a tube, which means, yeah, taking during a cradle and a backside of a plunger. This also cools a solder quickly and does not seat never any heat by means of a wall of tube. Dispersing A solder throughout can touch like the defect to draw but is really the no. is easy to clean, and calm no precise of the do except once in the longitude while. For my calculations, if the solder blob is the 2mm sphere, a solders the windy could resist until 500 blobs easily.

Pros:
Very light and easy to manage
Pocolos moving part and any electronic (read: simpler a better)
Replaceable gasket
Goes for hundreds of first uses of emptying is included at all the worry

Gilipollas:
Any, really, although a gasket is the bit in risking to be nicked or cut when you reassemble a device after his (a lot) cleansing occasional. This is not to treat it big, but so only something to be conscious of and sweet with.

General thoughts:
Happy took it, and of then I no the tonne to solder, does not think will require the upgrade this anytime punctual. It is perfect for my needs with joints of circuit and small components.
4 / 5
An image thus produced tip all the construction of metal.
That is to be receive was plastic average, half metal, with an upper half screwed to a subordinated half using your fine plastic edges.
These produced is not durable at all.
Will be to use the infrequently quite that will not return it . But that sees is not that takings.
4 / 5
These products looked well when have takes he of his packaging, but some first time used it, a separate unit to two pieces. A main cylinder is threaded in both ends. On one finalises a 'tip' edges to a cylinder. In another end, a plunger and an edge to cause to a cylinder. BOTH of some threaded ends of a cylinder are too big to accept some edges in a tip and some edges in a plunger. I am surprised that these produced was a line of assembly. I can not see any way that the alone one of some units possibly would be the compraventa well. Please, no shabby is one.
5 / 5
Has received so only a desolsering bombs today. It tried it so only see like this has done it and has burst averts. Then it tries to fix a bomb and find that it can them there is not the cradle inside that is entirely has bent. I so only by means of this product in some rubbishes because it touches any use anymore. I expect that this was so only the defective product
5 / 5
Does like this feigned and a prize is abordable! I have not had any question that extracted has saldado of some old Gamecube the controller has takes some parts of to fix another. A one has received was slightly different colorwise like the iron has the chrome arrived in place of a blue. But it looks identical to one some Adafruit the industries spend like this chair quite well in that.
A lot always have the hand in bylines as it can be the little delicate in time. Also a force slightly can press your yes calm project the the on says, the pair to help the hands but I have had any question that achieves my aim to the equal that would say that that shabby of mine has been justified. Also never it hurts to have solder wick handy to clean on those some bombs does not extract ! They are the noob when it comes to tinkering but still would recommend this tool for more the start was.
4 / 5
After purchasing 3 different types of these bombs, finally found a concealed like this described and like this reviewers said and has given the few tips on like this partorisca use this tool. A cradle of plunger is easy to pull behind, the key of trigger is easy to press (the difference of another three I experience).
Feels a lot of crafted in your hand, any so only the light piece of plastic, the majority of everything will suck especially of a solder around the alone pin (different some other I experiences). I have had to that rooster some another long to take all a solder of the alone pin and a placing of tip was one same, well afterwards to a pin with an iron in an opposite side. Some reviewers said it clogs on but used it at least 100 times and he there is no clogged on on me. For a prize and the quality look no further... OSSIA A a !
5 / 5
So only like some other descriptions complain roughly, has received a totally different element that pictured. My forward has saldado the sucker was identical to a picture, and has had one all the organism of aluminium. An element there is rid is the half plastic organism in two different colours. A superficial threading connecting some halves is also plastic, so that it does not have any way this will last more more than the little time that is disassembled to clean.
5 / 5
Agree when the small material like this was so only the travesía fast to a shopping centre or wherever a Radio Shack was? Now still with Prime minister you gotta expect the pair of days. I have tried also some tents of House of big box. I guess some the old timers were was, a boy that help to have to me then deer in a headlights answered. Taken to restore train of audio of the vintage and am beginning to @give so only that lovely RS was. The majority of a material am doing on is of a mid 70s Almost each joint has the little leaky capacitors. This does to take the grandson desolder like this easier. It maintains a surplus to run down some traces of joint of the circuit.
4 / 5
Has not had this bomb for very long, but has done enough his work when it used it to them. It was uncertain of an almost all the quality of plastic build, but has on resisted when I my projects to solder. An only With would say them is that there is remarked that has had to that try tentativas multiple use a bomb to suck on a liquid has saldado has been once heated up. Perhaps this was reason are not the professional so only the hobbyist.
4 / 5
Literally the falls avert with which 2 to reassemble the every time.

One first emission of some tears of plunger out of means of some edges that resists a piston to a main organism (near a key of emission)
A second emission, a piston breaks free sending he together with a cradle by means of a table

A unit I receipt does not look a a pictured. A main organism is money , and a rear portion with a plunger / of piston is blue.
5 / 5
Uses once in the moment to of-solder and cleanup the solder jointed or components of substitute. It holds of the heat is well. A tip has not melted or deformed still. A recoil of an action of cradle takes the small taking used to to maintain a tip in a be of something has done on. In general all the compraventa well.
5 / 5
Has been disappointed when it has begun to use the; a an I receipt would not remain near. An upper-the majority of near of edges, among a real bomb and cylinder, has not looked to return or control, as while the pressure has been applied for a cradle in a bomb, entirely would eject one the bomb (upper-part) of a device. I have received perhaps the defective a. Could have it it has estimated less, but after wrapping it closely with electrical tape to maintain some two pieces of a together organism, a subject has been solved and was able to use my satisfaction. Perhaps some the edges the deep plus could solve concealed.
5 / 5
In the first place was, solder the windy is quite simple according to which the mechanics goes, how is quite hard to ray he up unless pass roughly 10 seconds that draws it. I have bought this after the forward has saldado windy as it concealed one was the total piece to crap this has broken inside premiers 10 minutes to try to imagine out of some useless instructions. It concealed it is not a chance with east a.

Looks to be big quality, work well, and is real easy to open and clear was. In general I can recommend that this has saldado windy, especially for a prize.
4 / 5
Was reluctant to purchase this element because of all some negative critiques. Of then all another solder the suckers also have all these bad descriptions, has decided to purchase this one and the try was.

Am not sure the one who some bad descriptions are roughly. There it looks to be two complaints. I want to direct these with my experience.

1: it does not suck a solder of a joint.

Has used this long to repair the LCD monitor. It has not had any question that sucks a solder of a joint. It was pleasantly surprised in credit it a solder sucked of a solder point. After reading some bad descriptions, has been expecting the lackluster operates it but was cleaned more than the solder braid.

Can so only surmise that some people those who are having the questions are not jamming a tip a lot up against a goodness and an iron to solder tip. It does not concern roughly that burns a teflon, will be a lot while it calms is not in the resistant against an iron to solder for several minutes.

2: Jams of Device to solder

Again, was pleasantly surprised after the little solder the joints have been sucked cleaned, when I recharge a unit, has downloaded the film to solder. Apparently this unit is self cleaner. Perhaps it has had the question with leading creations. My experience is that a solder is ejected when you recharge a unit.

Thinks one of some questions that can cause this unit the jam is calm he a lot of jam a tip a lot up against a goodness, tip of iron, and joint. A solder is so only partially sucked to a device like this some of him takes stuck in a tip, jamming the.

If this device is used properly, a solder is sucked clean of a joint and then ejected after the pocolos use.

Any there that asks yes would owe that buy this, highly would recommend it. Test out of the little first time to use and see that well a suction this. If it does not look as if a suction is doing then a unit, more probably, has the leak to somewhere. Opened the on and lube some coverages and you would have to that be good to go. Silicon to use lube.

This law of unit 100x better solders it braid. You save a bit degradation and use this for reparations of joint.

Félix
4 / 5
Says Weller the mine is the Stern , any extracted big, shipped fast two days my door, dipped the to use and sucks still to solder! Action to jump quite strong, has taken a tool averts has extended a cradle the small and has solved that question some, the cleaners was the breeze the majority of a solder is exited during action of plunger, a rest so only dried was after taking a tip, dipped the drop of tool of interior of the oil and the place has been for another day! You could spend more for the best a, a way sees it free nave, there is not had to that drive around during a side of country (I alive in a forest) to find one, saved time and money on fuel, reason spend 30 bucks in gas for the tool that cost the little bucks!
4 / 5
As another there is remarked - right out of a container, with which three or four 'click' a thing has come averts with the parts that fly in a threaded neighbour among a plastic organism and barrel of aluminium. Not cooling for the product has feigned to close unexpectedly the plunger with the big cradle. I have wrapped some edges in the pair of discharges of the tape and looks to resist now, but the one who knows for what time. In a prize, any value a time and endeavour to return it, but can save yours.
4 / 5
One produces does the VERY poor work. It creates vacuum and work properly.

Ossia Where some good informative ends. I have bought this partorisca suck on soldering of the electrical joint in the Chevy pinch of truck. A gauge the engines have required to be reconstructed. It would not suck any solder of some pins in a joint. I have bet they are spent the good half hour that hot a pin and trying sucks on a solder. Any gone. The work so much is supposed to, so only any one a work. I think that that a whole question is in a cockroach of plastic tip with the too big hole partorisca suck on a solder. Calm can does not take partorisca seal down.

Is feigning Use this, likes WAS, trying the desolder and electrical joint, look elsewhere.
5 / 5
Hunk Of junk, press he down for the take ready partorisca suck and a enitre the organism comes averts. A threading sucks, and is too feeble to resist a cradle.
5 / 5
Has done mostly of aluminium, with the few plastic parts. It disassembles to leave for complete cleaner of some bits of soldato that takes sucked to a tube, which is the good thing reason with quite a lot of small bits partorisca solder a thing finally partorisca suck altogether.

A tip is some type of plastic, the soldato does not stick too easy, but can. A plunger has the cane that goes all a way down and clears a tip when there is depressed fully. I have had some solder to take stuck in a tip once, but then I so only pressed harder and a question has been solved.

When you Press a trigger a bomb lunges to a tip and when a paste of a short plunger will pull was the bit( is done sucking in this point in all the chance), supposes is doing on something really sensitive, or if your PCB is in fact the chip of potato this could cause questions, has not had any question with this appearance of him.

Does not suck enough. It loves more suction? Raisin more, ossia the $ 5 tool, no the $ 40 tool
5 / 5
Work like this expected that. Any terribly impressed with a quality of build, but takes a work done. Some first time have tried to press a plunger in, an integer has saldado the sucker has shot by means of a room! I have presionado once an end the little more to turn in a clockwise direction, no longer has had this subject. Also, I have not had any subject with the feeling of to tip likes was to melt or be too flimsy. My main worry so only is using over time and to the equal that resists up. Like this far I have no other complaints.
5 / 5
These produced sucks, but so only when you press down a plunger and then press a key. I have better used to solder suckers, but nowhere approach this row of prize. For an occasional 'undo,' this product is well.

Is not fearful to touch a tip with your iron or molten solder--that can take a heat. Drop in there with him.

Any to be add if these were semi-automatic?
5 / 5
Once some results of tip dislodged is useless same after pressing it behind in. This battery of useless plastic jam up after the alone use and spits has saldado during your project.
4 / 5
Some first time used it a tip has flown was and lined some window tinting. Some rays partorisca pour to this main organism, and am like this free that maintains to the fly was. And as it concealed it to him it has not gone enough to do me crazy, a darn sew any same work. It averts this bad fact, element of not doing to all the cost and take something that in fact works.
5 / 5
A tool not even would remain joint directly out of a container, entirely unusable. I have taken the risk calculated has based on side and thought it would cost to try it. It is not , it would estimate more below it is possible, spend the little more for the product of quality.
5 / 5
Once imagine this thing was, work like the charm. I have found that the majority of a time when doing with joints, his easier that take a transistor/of first discharges, then concerns roughly take a solder. After taking a cam/transistor, situates a Solder Sucker in a side of an opposite joint a solder directly in a hole where a goodness was previously, with a trigger in situating to suck. Then, I heat a solder in another side and press a key in a Solder Windy and usually finalised with the clean joint. This leave to do a work I, without help.
5 / 5
First time that uses one of these... That the saver of time! I have dismantled entirely the mine and he is totally value one $ 7. Some careers of axial of solid steel of down a thumb loader to the self-cleaning tip some presses some have cooled has saldado of a nose when you reload a plunger. Occasionally it was rigid partorisca the shot or two, but once clears a cooled has saldado, he behind until speed. If takings yours avert, sure mark to edge a piston and iron of an end of tip of an external tube.
4 / 5
Has not been that it has lived it without east. I have used so only the solder wick in a past. Now it pulls the majority of a solder with east. If has one spatial and can go in near with a gun can take all a solder. Otherwise, so only has to that do the little net up with the mine solders wick. This save of on heating a component. A harvest has saldado also ejects cleanly of a gun. Some tips is hot -try and will not suffer harm for your gun partorisca solder.
5 / 5
Has not been that it has directed it partorisca treat desoldering before it has taken this thing . To good sure the big timesaver. The works add and consistently. It is also easily deconstructed partorisca clean was built on soldering. But this is so only be the question once partorisca me.
4 / 5
The good work. To good sure would use this on soldering wick any day now... The desire had jumped partorisca he powered vacuum model, reason this can be delicate to paste an interior of the a moment exact key require it to take a solder. I have had this for the moment, and to good sure will maintain partorisca use the, is very of confidence. So only it requires better timing that has sometimes.
5 / 5
Low quality Chinese product that is has arrived broken. That The plunger would not remain down. Returned partorisca full repayment. Felizmente My mandate of desoldering wick is gone in a same box, how was able to do that it has required in all the chance. They are having the hard time that finds the bomb that is not the piece partorisca crap-- is all rebrandings of some same pocolos crappy bombs.
5 / 5
Economic tool , simple that takes a work done. It feels class of cheaply fact but has not had any one questions with him, and to good sure products quite suction to take liquid has saldado. Finally with which there is sucked on enough the solder jam, but ossia easy to fix: some inferior and upper halves can be unscrewed of an another (like him clicky pen) to take a solder. So only the open arrive and dump out of a solder flakes, scrapes some for behind together halves, and is good to go. But please does not touch a solder in some rubbishes; there is casualidad the well has goodness in him and in the does not require more the goodness that takes to a water supply. Instead, it situates of him a calm same way old batteries and electronic devices: one and-cube of waste.
5 / 5
Quality of the good build but I could not take this tool to do effectively for me. I found it hard to maintain a place of a tip in my joint. When I have pressed a key to start with suction, a unit would jump backward that loses a solder. It would guess that with practice, would improve to use this tool. A creation is his but would have to that try this calm product.
5 / 5
East has saldado to the windy is has arrived broken. Both plastic screwable the easily fallen finalises out of a metallic cylinder that marries a cradle. Like this comedic like this is in hindsight, mine according to tentativa in 'cocking' a mechanism to suck ejected a cradle and tip by means of a room and my Albero navideño. With which a lot of looking for I finally found some pieces and are now súper gluing a tip (and perhaps another end if need be) reason require to use this asap.

Is a lot cheaply fact, like the prize could suggest. Originally I Have been with this he so that it was the neighbourhood of a prize of RadioShack version. In all the chance, am disappointed with a quality of this product.
4 / 5
Any work adds. It likes. It looks to be easy to clean and for a prize was exactly whatI required
4 / 5
This tool is sum for when yours take has saldado neighbours of small circuit! I have bought this to substitute my old more has saldado windy! The reparations of controllers ( xbox & ps3 ) this tool is easy to use. Push down in a cradle he the black plunger has uploaded a then when it sees to heat on a solder press a black key one this will take all a solder of one yours describe to repair or of- soldering!

Pros : More effective solders it wick

Gilipollas: a fund of plastic tip when near of an iron to solder tip of iron!

On everything would buy this again.
5 / 5
I have required to of-solder the 9 connector of pin of the motherboard as I have used a solder sucker partorisca take a solder of the each one of some joints. I have it that has not used never a before has taken like this some time partorisca learn for the use. I imagined it it was that with any solders windy has to that dip a legislation of nozzle on a joint. A tip of a solder the windy is plastic, but has the quite big founding temperature that mine 30 Watt that has saldado the iron has not melted he in a bit those that chances that is gone in contact.
Could not have done a work without him. So only the no, a one has taken was black metal, with the white plastic tip and the key of yellow plunger.
5 / 5
Ossia The estimativa good has saldado windy. I used it the plot before it has begun to the fall averts. It has fallen finally it averts but it was repaired easily with some súper glue.

The reparations of estaca continuous do.

Roughly like this well the solder windy to the equal that go to take for a prize.
5 / 5
DOES not REMAIN NEAR, junk the plastic fulfils edges of metal and does not remain near.
Could very included use it once.

'These produced does not have the police of turn.' That?????

Buyer beware, pays an extra $ 5 to take one these works.
5 / 5
Has not bought this to solder (but has used to do in electronic assembly - I so that it follows familiar with soldering.).... This in spite of, a suction looks perfect... Any to little very too much..... In fact it has wanted to something cosmetically has seen like this the tool of dermatology for blackhead, cyst, etc. Scrolling in a face but some descriptions have said was economic and has not had quite a lot of suction. Hope These works. It looks a lot of-fact and sturdy also.
4 / 5
Like this has produced. He that would have to that he and in the prize I really adds. An only complaint has is that a @black of @the @knob on one load exits a lot easily. In fact the mine is to go like this when I have pressed a key for him to do his thing of suction, has flown was and no longer can find a @@@knob. It does not import he so that it is very easy of the press down with just using an iron of crowbar/of the uses of metal to touch and actuate a vacuum. I add compraventa this in spite of, would buy it again in the heartbeat has has had to that. I produce it adds.
5 / 5
HAS good suction and done a work well, but with which three years so only infrequent use, a latch is spending was and a piston any reliably stay cocked more. It is quell'has bitten uncomfortable (for my hands, in all the chance) to compress and release it totally with a book so that it has to that do two times or more when he accidentally the emissions is annoying and delays down my work. I will be to substitute he with something more robust, probably punctual.
5 / 5
Has loved to buy the big plus-finalise desoldering bomb (Weller) but has no the found on Amazon. When I have received it is one , has thought has not been to do a lot well because an iron of inner metal looked crooked and not having prendido in an a lot of tip of a bomb. I tried it it was, and it sucked on a solder really well! Still in the bit of the distance that I on, this bomb sucked still was the majority of a solder! Yes, it is self cleaner. Always it presses a bomb has retreated down to rig for a push of next key, and the little circle to solder explosions immediately!
And like the note when desoldering: hot a solder until 850F; I think that that this can be where another was having question.
4 / 5
Plastic and inferior cup as it does not remain in a device. It bursts it was and it has had to use electrical tape in both ends to prevent an upper or inferior plastic to burst of a metal that tubes. Cheaply Do. Better bought the entirely device of metal.
5 / 5
This has saldado the windy utmost work. There is metal to plastic edges, but there are quite a lot of edges that does not think it will undress was, while it is not to cross threaded. I sucked On the little bit of melted first flow, and he coated an interior. Now when the streak to solder occasionally hardens in a tip, bursts well has been with the light tap. It thinks the majority of some negative critiques is people that does not know that it is doing, or mistreat the. Also it has abundance of suction to suck on melted has saldado.
4 / 5
Has not opened a container still, but looks obvious that it would have to be able to do his rightful fulfilled. It Disorder of costruttore on a creation of the Solder Sucker? This would blow my alcohol. Really sad that this estaca is not a lot informative, but can update this once receives the mine Solders Canal. It would recommend this product to any concealed does not want to spend a lot of money in the box to the equal that would cost more, when calm so only can buy things individually and take more for your buck. The better thing are has taken this interior 3 days like planned.

Top Customer Reviews: Teenitor Solder ...

Rating: 4 out of 5 with 49 ratings
5 / 5
I am pleased with these escentro ad' sald windy. I am taking, but in in in the to to my professional likes him his has used Sada Pulit sald windy. They have done very well, but it was much bigger and take to handle with a delivery. A Teenitors to beat that it is handled very easily with a delivery. So that a prize was outstand for three units, has bought a Teenitors same although the has not expected action. As it Results I am very pleased with his action. They compare it varies favorably with some units have used in a past.
5 / 5
I have required to substitute the fatality, soldered in stack of backup in a motherboard of the Yamaha of vintage DX7II synthesizer, and could not find my esventosa older'. This three group was a same prize like the sun of some another, as I have imagined that a heck! I am happy to inform that he perfectly and has finished a work without problem. It opens, it do not say it is big precision , pro tools for any roads, but suck to solder. One issues sees it, pauses after the pair of uses has two more!

Inferior line: If you are a professional of electronic and soldering daily, probably wants to look for the big quality, precision of-soldering tool. But you are I how me and saldaste electronic two or three times the year, that is to say exactly what necessity!
1 / 5
This resolves a problem to ask how long these will last. Each what 3 is arrived angled, 2 any acting, a fraction in 2 pieces. Perhaps the Ziplok the stock exchange has not been pertinent packaging.
5 / 5
Why I do not take this earlier!!!!??? They wonderfully. A tip of these is plastic, but some plastic looks to take temperature very big without melting. I can pose this right in a dish while I am melting the joint, paste a button of emission, and take of a sald very good. Amur These things. Very better that plait, which caused me often to use too much heat and impulse the tampon.
5 / 5
I have chosen in this element so that it was three for a prize of 1. I have imagined that they were crappy at least could take 1 work.. Well Each what 3 preform equal in a one has purchased years of marks of Radio Shack. I spend the few hours the week in my sald canal and only could no with out of the sald windy.
5 / 5
The tool adds, the value adds. The May knew It this box has existed has seen included he in Amazon. The perfect works. Only thing that would be it better is the highly the resistant heat til with the slightly smaller orfice. Perhaps porcelain. But for a prize I of the that cured yes only take or or two uses out of the each
5 / 5
The laws of product add! Very happy with each 3 of them. It has to clean to era.
Has read the few descriptions in some nuts in the. Has learnt descriptions and was careful.
THANKS TO all this has published that!
5 / 5
I have moved recently so these are still packed was the boxes take my sald poses them of canal up. Has any one used it in fact these but has had an attacker and these looked very when I the test of suction.
2 / 5
My technician easily can improve, but in general this only look to suck the a lot, bit very small to solder. Like The consequence, of-solder taking the significant quantity to time to solder joint. There is probably the better road.
4 / 5
It looks and listen kinda cheap, but has expected that. Honestly Although this does quite well. It likes them to them another is substituting the aluminium quite one that at the end there went it the beginning of nuts. I think that that volume more the rests every time depress a plunger, but for a prize, for three any one less, and very can any one complain.
5 / 5
I have required partorisca substitute the dead person, soldato in battery of backup in a motherboard of the vintage Yamaha DX7II synthesizer, and could not find my esventosa older'. This three band was a same prize like the alone of some another, as I have imagined the one who a heck! They are happy to inform that he perfectly and has finalised a work without question. Now, it do not say it is big precision , pro tools for any piece, but suck partorisca solder. A way sees it, pauses after the pair of uses has two more!

Inferior line: If you are a professional of electronic and soldering daily, probably wants to look for the big quality, precision of-soldering tool. But it is taste and have saldado of electronic two or three times the year, ossia exactly that requires!
4 / 5
Am pleased with these escentro announced to solder suckers. They are you take, but in the to to my professional likes has used Sada Pulit has saldado windy. They have done a lot well, but it was much bigger and hard to manage with a delivery. A Teenitors can be managed a lot easily with a delivery. Reason a prize was outstand for three unit, has bought a Teenitors still although it do not expect action. As I result they are very pleased with his action. They compare diverse favorably with some units have used in a past.
5 / 5
This solves a question to ask what time these will last. All 3 is has arrived bent, 2 not doing , one broken to 2 pieces. Perhaps he Ziplok the stock exchange has not been pertinent packaging.
5 / 5
Sad to say has not had of the a lot of regime that use this device,has saldado a lot easily take sucked on a joint of circuit has done on. I have required to substitute some capacitors have required like this to desolder & take of a joint of circuit has printed. I have bought three of these devices have had like this the extra of pair ready to go, has tried the number of time with an iron partorisca solder in my right hand & a solder to the sucker has situated like this near of a solder like this possible in my sinister hand,the second an iron partorisca solder liquified a solders has pressed a key in a device so only to have law two times out of 5-6 trys. I have finalised partorisca pull in one covers. For a cup of a joint while founding a solder in a rear side, takes two trys for leg to take some old part of a joint but I feel this method has done better. Perhaps with more suction and or some the good directions in a better way of the use could have helped? It does not know ?
4 / 5
Reason does not take this sooner!!!!??? His wonderfully. A tip of these is plastic, but some plastic looks to take temperature very big without melting. I can dip this legislation in an iron to the equal that am melting the joint, paste a key of emission, and attractive out of a solder a lot well. Amur These things. Very Very better that braid, which caused often to use too hot and impulse the tampon.
5 / 5
Global a lot sucking can, mine desoldering laws successfully. Some looks to pour to be quite the resistant heat ( used 350F). Every time a surplus has saldado is pressed has gone by the cane of metal in a half when it uploads a bomb, class of self cleansing.
4 / 5
Has chosen on this element because it was three for a prize of 1. I have imagined that they were crappy at least could take 1 working.. Well All 3 preform equal to a one has has purchased years of Radio Shack. I spend the few hours the week in mine solders canal and so only could no with out the solder sucker.
5 / 5
The tool adds, the value adds. It has known no Never this box is existed saw it included on Amazon. The works perfect. What only that would be it better is the highly heat resistant til with the slightly smaller orfice. Perhaps porcelain. But for a prize I of the that has cured yes so only take one or two uses out of the each one
4 / 5
the looks of construction slightly less robust of the mine last a which is lasted 40 years, but has taken three of them for less than an original! Suctioning Is a lot well, which, after all is the one who this tool has been drawn to do.
5 / 5
Which in this chance is the good thing. Element the work adds that it pulls has saldado out of PCBs when desoldering components. The value adds for a money would buy again. Any subject with a tip that melts neither, good product.
4 / 5
The law of product adds! Very happy with all 3 of them. Calm has to him cleaned was.
Has read the few descriptions on some edges on him. Has has learnt descriptions and was careful.
THANKS TO all those who posted concealed!
5 / 5
My technician easily can improve, but in general this only look partorisca suck the a lot, has bitten a lot small to solder. Like the consequence, of-soldering takes the significant quantity to time partorisca solder joint. There is probably the better way.
5 / 5
Does a lot good to disassemble PCB partorisca modification, etc.
personally like much better of that welding wick.
No really cleanable partorisca maintain an extra manually.
4 / 5
Good product partorisca a plus of prize goes in to 3 band. If be any has not considered it never. It is not the product of professional note but partorisca use/of hobby of the laws of house.
5 / 5
These are compact in measure, but abundance quite big for more by means of-connections of hole. It likes that I can upload a plunger and extract a solder with of a delivery while it resists an iron in another. Having 3 is add, although I still am using a prime minister an and does not see it spending out of any punctual time. Recommended.
4 / 5
I recently moved like this these are still has packed was the box takes mine to solder the canal dips up. I have it that has not used in fact these but has had a before and these looked well when I the test of suction.
4 / 5
Has purchased a three band and all three there is prendido to create suction after so only the pocolos use. These really suck, but not liking has to that.
4 / 5
Law well, well in fact for a law of money adds cant goes bad with them quite economic that they so only last the little calm month would not be to hurt launching them was and buying 3 more.
5 / 5
Well of law for the main elements, nozzle he also big for form of circuit of small bosses in neighbours.
I only neede 1 but 3 band was less expensive.
4 / 5
Are very pleased with a way this desoldering the tool has done! I have required to do a bit repairing in the joint of circuit and a tool the work adds in sucking a heated has saldado was like this some the old parts could be take. A container of 3 tools was less than expected to pay for just the alone tool -- he so that it was for the win '' for me.
4 / 5
Look And feel kinda economic, but has expected that. Honradamente Although this does quite well. It likes him another am substituting the aluminium the very one more that has had finally the start of edges. I think that volume more debris every time depresses a plunger, but for a prize, for three much less, the really can not complain.
4 / 5
No at all. Tentativa On and on again in a main heat with tonnes of flows with leaded solder and does not suck on the drop. I probably stray more the money that destroys components with heats to try to use these things that in fact spend on him. Any I still uses these were free.
4 / 5
First time that use the solder sucker. It has done well while the tip has been resisted to a solder properly but assumes concealed is one same with everything of them. Relatively the economic construction but ossia that is paying paralización and there is 3 of them. Be careful when opening to clean like this of the edges in a sleeve of the aluminium and the plastic organism are insignificant.
4 / 5
Sucks has saldado. A device is amiably priced. The time will say like this stands up to use.
4 / 5
No an element of the main quality, but he a work. The desire avenges with extra tips instead.
5 / 5
Has required the solder sucker for the monitor recap project. This work surprisingly well and having the transmission is certainly a lot also.
4 / 5
Recapped The tube of vintage amp today. It has been the smoothest way that has expected. Partly thanks to this product. He an excellent work to take the surplus has saldado.
5 / 5
Could no to take them to suck a solder. I have finalised to use the solder wick.
5 / 5
Sucks On my unwanted has saldado then spit was like the good boy.
4 / 5
Sucks has saldado, And his spit the backside was. Has the life limited has turned, as all a cheeps , but do like this expected.
5 / 5
The economic looks, has another mark, another mark feels very better. But both good work.
4 / 5
wow Has saldado To the sucker has come punctual and the fact adds and takings 3 of then in the band a lot of value he the give 20 thumbs up in these
4 / 5
the Works likes them announced and of east is all has expected. Three band is the very good value .
5 / 5
To the suction is feeble. Hardly I see a solder taking sucked
4 / 5
has Fulfilled a work. Easy to use. It have to that see roughly durability. It feels the little less solid that opts more expensive ive has used in a past, but good value in general.
4 / 5
Law. The tips found the little fast, but, his thre work.
5 / 5
MINE LAST A has LASTED 10 YRS THAT HAS TO THAT BE PLACE OF FOR LIFE WITH THESE
5 / 5
One of them was crossthreaded (but still resisted closely and fact like normal) as it guesses I gotta takes some stars was but the product adds the prize adds
5 / 5
A lot headed has saldado windy, after only afew uses one of some units there is prendido partorisca suck still with which has repeated cleaner. Also a second some some use of courses partorisca depress a sucker a plastic piece has flown was after only the handful of uses. A third an east resisting on enough very for now.

Top Customer Reviews: Kotto Solder ...

Rating: 4 out of 5 with 27 ratings
4 / 5
Some two frames on have the plot of the descriptions and calm can apply some same to this element. Has an Engineer, and ossia identical excepts in colour and markings. Any reason partorisca think Vampire very also be what same. Of of the this is more economic highly can recommend, while you comprise is shortcomings. Still a plus solders the sucker that goes IMO. Again, it sees Engineer and/or descriptions of Vampire.
4 / 5
Any Tip of spare Silicon, flies of upper was the little time used it! I glued the to a root but has not done! So only take an expensive more a Ss-02, maintains out of the east a
5 / 5
Ossia the description partorisca KOTTO Magnetic Soldering Title partorisca Spend that it is odd of then has the plot of desoldering descriptions partorisca bomb here, any products of transmissions partorisca explode the better indication?

A cup of a cage arrived with the something broken-weld any idea if ossia the QC subject or the rid in the subject of the soft container but a result was one same, something does not want to trust on to resist the hot element: I choose the repayment as they are not engreído that a subject same will not arrive into use. An element has received is not one same like pictured.

The magnet is quite strong to resist an iron. It is stable vertically but moves the plot horizontally.
4 / 5
Aims it of a plunger that clears a solder and the helps create a vacuum has broken was after the use the little time. No longer works. Hardly it has taken any use out of him, as I can does not recommend.
4 / 5
Has required this to help take the transmission of contact for a xbox a right bumper that no . The better tip is to add more solder to a first component to try to use any solder sucker. This one has done perfect. Cleaned out of a thru hole usually a prime minister tries, and a time has not gone down to error of user, ie the messed up. It looks to be a lot has done.
4 / 5
The plunger snapped was. This point is surprisingly brittle. 2 month of use. Some another has mentioned this subject.
4 / 5
I like a quality of build. A suction looks light, but is the tool the small plus that a big blue and yellow plastic some have. But this tool is for my stock exchange of tool and need to be this measure. They are happy.
4 / 5
Has taken east has saldado windy on done the week, and with which some light normal use, has broken. A thing has done like this expected for the moment but when it was of-soldering the joint of circuit, a cup of one nails has come to the fly was while sucking on some solder. It would not recommend .
4 / 5
Sucks, And no in the good way. One covers of the aluminium leaves has saldado to clock an inaugural. Constantly disassembly to clean it was. Returning
4 / 5
Orders of suction, the tip is durable, light. And it comes with 3 tips.
4 / 5
This element are partorisca add and in the reasonable prize! The works that has surprised. This he much easier partorisca me partorisca change LEDs, easy fact rewires, and the helps clear partorisca solder the almost cleaned tampons. To good sure would recommend this product.
5 / 5
A work well, the power of suction adds I supposition but some tips of silicone take clogged with soldering really easy. Has has had to that take take a tip was and the cleaned was after each another desolder.
4 / 5
These works of device but is small to the equal that have taken the picture to aim you his measure.
4 / 5
pros: The suction is sum ! Very better that a traditional blue sucker.

gilipollas: I owe that take a thing averts and clean a hole of nozzle after each draw or some jams of plunger when dipping he for a next draw. Ossia Incredibly messy and the time that eats, he doing basically useless. Ossia Reason gave it some stars.
5 / 5
Ossia The product adds . A power of suction are to add and is extremely easy to use. I have had to desolder each transmission in the keyboard and I would not have been able to do he with out this sucker.
4 / 5
Powerful. He a work. Excellent quality. It would buy again. Please is coming with tips of substitution of the silicone.
4 / 5
A @@@knob in some flies of plunger was constantly. With which roughly 10 times of of the this in the transeúnte no longer goes back in calm so that it is pressing a cane directly and digs your skin. It DOES not RECOMMEND . A prize a big plus has compared to another solder the suckers does not give you better quality. It would owe that it has bought it the $ 10 a.
5 / 5
The work adds has more than enough power of suction and some tips of extra teflon have distributed also the good plus
4 / 5
It is light and a magnet is feeble. It does not think it it could resist the pencil without touching on, much less the iron partorisca solder.
Am returned and has bought the sturdier and no magnetic stand.
5 / 5
A quality is very good and magnetic force very powerful
4 / 5
One of a better Vacuum Of-soldering the bombs have used.
4 / 5
Sucks consistently. I have done perhaps 100 joints took it of then. Still it sucks. This thing sucks súper hard, every time.
10/10 would recommend.
5 / 5
Very Built and easy to use. Piece of the nozzle of the silicone resists partorisca melt.
5 / 5
A lot soldering stand with magnetic base. It goes well with a Kotto canal that has a base of flat metal.
5 / 5
In a indent of where a key takes an inner iron of a desolder bombs, has the thinnest section that snapped of cleanly after the pocolos use. Partorisca A prize, was more to good sure any value he like this more economic some probably will be more than confidence.
4 / 5
Exactly that the need has had Games my table quadhands and my iron maintains perfectly
5 / 5
The suction is well and produced real the one who his meaning partorisca do. This in spite of, an interior of plunger partorisca clear a solder inside a tube snapped quickly.

Top Customer Reviews: Tenma 21-8240 ...

Rating: 4 out of 5 with 58 ratings
4 / 5
I have tried this partorisca disassemble two junk near of circuit having the variety of by means of hole capacitors, MOSFETS, resistors, transformers etc. partorisca use a tool effectively there was in 5 learning of curve of small, and then does reasonably very for the moment - until precise cleaned. It has saldado Build Up inside a piston finally inhibits the suction until some results of tool less and less effective. This of course is expected, but like a hell is supposition to clean a thing? It is drawn to be disposable?

There is certainly a lot of esbotón of lease' to separate a piston of a cylinder for a purpose to squander has saldado scrolling. On Youtube there is to write it the one who is able to clean a unit so only for grabbing a root of plunger in an upper and rasgando an assembly of piston out of a boss. But to force in this way, a plastic frame that some accesses of cylinder to this fractured, which is unacceptable!

Has to that it does not have to that break a thing so only for the cleaned! I plan on that finds the way to release a piston of a boss without causing harm - perhaps the little micro-grinding or modification in some way. If any one has any ideas in of the this, please stick the commentary down.

BTW - My unit is marked '30W 110-130V' and when connected to 120 VAC draws the measured amps = 30 watts. But of then it tolerates the voltage he big plus, tried it also connected by means of the variac (transports-transformative) and has augmented a voltage to 130 VAC, then draws -0.3 amps = -40 watts. As some works of costs of units in 30W, but 40W sewing of speeds on has bitten it.
4 / 5
So only it take this and has has had to that the try immediately. Coming from the long history of electronics, solderig and desoldering is not the new experience for me. This in spite of, have not taken never around to take any one has advanced tools, meaning besides a bomb of suction rule. One there is anticipated so only solder the tool has dipped any money to of the this adjustable mine soldering canal. So much, now I have the heated desoldering bomb.

My first impression... It sucks... And no a good class. Well, fact and he the no. is so only 30W like this honradamente, does not expect too much. If you are looking to do the 'fast work', this is not a tool for you, of then takes roughly 5 to perhaps 10 minutes to create the temperature. Perhaps it conceal it is not long at all, but it is so only to take a boss, ossia the long time . I do in the middle of production like this while 5-10 minutes so only will not cut it . My canal to solder creates to temp in roughly 60 second (go in 550F-650F of colds).

This in spite of, once creates to temp, is not all this bad. It has saldado To to the regions likes them to them the container of the massive earth cushions this takes 15-20 seconds of the heat of the iron partorisca solder that it takes this desoldering bombs roughly 5 seconds, then clicks a key. This is due to a zone to contact main of a tip. It maintains that in alcohol for small points of contact. So much, some works of mechanism a lot enough.

Has tried this with diverse big solder regions and one or-the coverage looked to begin to struggle with which roughly 3-4 bombs, so that the point of reference. Still I did not open it on still, but any the one who has answered the question has said to basically yank of a cane of metal. I will try that afterwards. They are sure he at all is exciting.

Has to that mention the one who uncomfortable is to use and place down. I have looked the video of Youtube/of Youtube of the pair regarding this first bomb to decide to order one. One issues was, 'regarding the tent, while still using it', and was aimed that a bomb has the something dish where can the to you remain in a bank. Yeah Well... This something slowly has been created to run a boss, and a plan that remain the zone is so only he bi-produced of that. Like this when it remains, a bomb takes to whole plot of spatial and very easy to attack on and take a unscheduled hastes of adrenaline that goes. One something plans also feels acute, although it is not acute, as some designers to good sure has not had
ergonomics in alcohols.

Also, although ossia he esew' very but perhaps any in this application. A boss to be able to is to have to that quite heavy ... And it is weighed. A boss to be able to hanged to plot more than a bomb he. An element to heat is so only 30W, and your house cabling can spend roughly 1700W. Ossia Entirely in engineered or on-spec'and. A weight of a boss done this tool 'disturbed' and feels uncomfortable when quell'using.

In general, taste so only been due to of a fact that the to good sure is easier that use that the iron partorisca solder in a delivery and the bomb in another, and that it has to do the fast transmission-was to maximice yours suction. It can this produces to be better? Of course, but for a prize, will be to buy another for another bank and perhaps the third like the transmission.
4 / 5
This thing is surprising. I have bought he with sheer doubts in my alcohol, then,'oh a lot of', then my first use in the capacitor, clue for anto Sht!!, I do not create it ; WORK, And are WIGGLING The CAPACITOR FREE WITHOUT EXTRA ENDEAVOUR!!! Then I have changed it was fifty some discharge in the Bose irradiates wave with some same results, maintaining an eye in any action reduced (any) because of me any when cleaning until an end. Spent this am free of fear of of-soldering; it thanks God are free in last!!!
5 / 5
Any godsend that a lot was to be, but is in BETTER PLOT that regulates it has saldado windy. Boss a half in an infinity ergodox this has required some changes that takes finals, but is struggling in another half that has used to plot partorisca solder on.
A thing that the people have no really remarked but is the enormous plus - is in plot faster that use that separate tools - dip a sucker, besieges he in a joint, heat, key of press, repeats. Much faster that that it has to use two tools and of the hands, then dipping an iron down to reset a sucker. It has to that it weaves of components to take, the value that considers, especially for a prize.
4 / 5
Has has wanted to really this to be the good idea. Unfortunately, doing the plunger desoldering tool that the works in this prize is hard. For thirteen bucks, probably impossible. If you are using the plunger desoldering tool and the iron partorisca solder, a distance among a plunger and a tip is very short, as vacuum is acute and quite strong. It adds three or like this thumbs (the distance of a tip has heated to a fund of a desoldering plunger and a vacuum loses force. A lot of force. That takes one has shot with a separate vacuum the tool often takes three or four with east a. Ossia Especially true if an advantage of component is fat or a solder the joint is big. It can do well in small, slightly soldato near but some casualidades of lifting that the tampon is quite main to to that likes.
5 / 5
First of all I have received a 30W version, like this perhaps a 40W the version is better. A 30W takes the long time to heat up and was mediocre in better in a container of DIVING has tried desolder. One causes for a bomb is like this far out of a tip that you neither has to that adopt an uncomfortable hand-held place for the use, or go back to two hands like six state use using the iron partorisca solder/hand-held bomb combo. A tip surrounds a nails is desoldering, so only like some pro tools, excepts with a pro the tools can be quite sure that a solders the joint is melted. No like this with east a, so it calms that has to that take on faith that is GOOD to suck, but seldom is that a chance. This means calm each one joints long. A suction looks pertinent, if uncomfortable, but an element to heat leaves to plot to be wished. The utilisation? Nope. Behind to an old method until I can pony on a chance for the pro unit. And for a record has been soldering and desoldering of then has had 16 years and this was a lot behind a last century.
4 / 5
It is so only he 30 watt and takes the moment to heat until temp. He seams, although I did not verify it, that there is the short temperature was, reason he all a sudden apresamiento more with a longitude to melt a solder and the minute later begins to melt has saldado again. I need the big plus temp cutoff. IMO.

CLEANSING: it is really easy to take averts. Take your thumb and rooster a piston and maintain pressing until you move a yellow tube the 1/16” to heat tip and while pressing impulse up. An assembly of the key of the push has two recesses where two tabs of an apt frame in to resist joint. It sees picture (do this while unplugged and cold iron. This was for a some not thinking clearly)
5 / 5
Answered to your questions.
Act. Yes For the occasional work very shabby. Calm can take tips of substitution for him ,Some tips are (DESOL3 Spare Tip). Simply unscrew a tip and ray a new an on ( does not take some rays in a side were ! ) I can calm the cleaned he, to Press a key/of thumb of the advance to upload to a place of lock and apply the little pressure and impulse on top of a same time and he will come averts to clean. PRECAUTION !!!!! It WAS LOADED CRADLE like to be careful. Now it takes partorisca time to heat up likes all old school soldering irons , like the patience is the must .
4 / 5
Spent 'this' as an alternative to release work to the good quality desoldering gun and use it less or so only to desolder the smallest components.
Very same do the good work in simple two-terminal desoldering components that electrolytic capacitors or 2w resistors.
A better result is obtained with him Desoldering Bomb and the iron partorisca solder.
Another bad creation is that it is very difficult to be able to download a imposición of has beaten.
Could say that has the good creation and a cost is down, but really no at all.
4 / 5
This tool is distant a lot the upper-of-lines he- desoldering canal--but uses it often partorisca leaded the components and utmost. Taking awhile to take hot--leave you the little time to leave hot up for better results. One jumps it the loaded bomb is quite typical: no like this easy to click to the place with a delivery, but again, is treating an economic solution here.
Laws more in of the holes of advantage of inaugural component in normal PCBs. The main DIVING ICs, etc. Maintain your realistic and calm expectations like this tool.
4 / 5
It is so only he 30 watt and takes the moment partorisca heat until temp. He seams, although I did not verify it, that there is the short temperature was, reason he all a sudden apresamiento more with a longitude to melt a solder and the minute later begins partorisca melt has saldado again. I need the big plus temp cutoff. IMO.

CLEANSING: it is really easy to take averts. Take your thumb and rooster a piston and maintain pressing until you move a yellow tube the 1/16” partorisca heat tip and while pressing impulse up. An assembly of the key of the push has two recesses where two tabs of an access of frame in partorisca resist joint. It sees picture (do this while unplugged and cold iron. This was partorisca a some not thinking clearly)
4 / 5
has tried this partorisca disassemble two junk near of circuit having the variety of by means of hole capacitors, MOSFETS, resistors, transformers etc. partorisca use a tool effectively there was in 5 learning of curve of small, and then does reasonably a lot for the moment - until precise cleaned. It has saldado Build Up inside a piston finally inhibits the suction until some results of tool less and less effective. This of course is expected, but like a hell is supposition partorisca clean a thing? It is drawn partorisca be disposable?

There is certainly a lot of esbotón of lease' partorisca separate a piston of a cylinder partorisca a purpose partorisca squander has saldado scrolling. On Youtube there is to write it the one who is able to clean a unit so only for grabbing a root of plunger in an upper and rasgando an assembly of piston out of a boss. But partorisca force in this way, a plastic frame that some accesses of cylinder to this fractured, which is unacceptable!

Has to that it does not have to that break a thing so only partorisca the cleaned! I plan on that finds the way to release a piston of a boss without causing harm - perhaps the little micro-grinding or modification in some way. If any one has any ideas in of the this, please stick the commentary down.

BTW - My unit is marked '30W 110-130V' and when connected to 120 VAC draws the measured amps = 30 watts. But of then it will tolerate the voltage he big plus, tried it also connected by means of the variac (transports-transformative) and has augmented a voltage to 130 VAC, then draws -0.3 amps = -40 watts. As some works of costs of units in 30W, but 40W sewing of speeds on has bitten it.
5 / 5
So only has taken this and has has had to that the try immediately. Coming from the long history of electronics, solderig and desoldering is not the new experience partorisca me. This in spite of, have not taken never around partorisca take any one has advanced tools, meaning besides a bomb of suction rule. One there is anticipated so only solder the tool has dipped any money to of the this adjustable mine soldering canal. So much, now I have the heated desoldering bomb.

My first impression... It sucks... And no a good class. Well, fact and he the no. is so only 30W like this honradamente, does not expect too much. If you are looking partorisca do the 'fast work', this is not a tool partorisca you, of then takes roughly 5 to perhaps 10 minutes partorisca create the temperature. Perhaps it concealed it is not long at all, but it is so only partorisca take a boss, ossia the long time . I do in the middle of production like this while 5-10 minutes so only will not cut it . My canal partorisca solder creates to temp in roughly 60 second (go in 550F-650F of colds).

This in spite of, once creates to temp, is not all this bad. It has saldado To to the regions likes them to them the container of the massive earth cushions this takes 15-20 seconds of the heat of the iron partorisca solder that it takes this desoldering bombs roughly 5 seconds, then clicks a key. This is due to a zone to contact main of a tip. It maintains that in alcohol for small points of contact. So much, some works of mechanism a lot enough.

Has tried this with diverse big solder regions and one or-the coverage looked to begin to struggle with which roughly 3-4 bombs, so that the point of reference. Still I did not open it on still, but any the one who has answered the question has said to basically yank of a cane of metal. I will try that afterwards. They are sure he at all is exciting.

Has to that mention the one who uncomfortable is to use and place down. I have looked the video of Youtube/of Youtube of the pair regarding this first bomb to decide to order one. One issues was, 'regarding the tent, while still using it', and has been aimed that a bomb has the something dish where can the to you remain in a bank. Yeah Well... This something slowly has been created to run a boss, and a plan that remain the zone is so only he bi-produced of that. Like this when it remains, a bomb takes to whole plot of spatial and very easy to attack on and take a unscheduled hastes of adrenaline that goes. One something plans also feels acute, although it is not acute, as some designers to good sure has not had
ergonomics in alcohols.

Also, although ossia he esew' very but perhaps any in this application. A boss to be able to is to have to that quite heavy ... And it is weighed. A boss to be able to hanged to plot more than a bomb he. An element to heat is so only 30W, and your house cabling can spend roughly 1700W. Ossia Entirely in engineered or on-spec'and. A weight of a boss done this tool 'disturbed' and feels uncomfortable when quell'using.

In general, taste so only been due to of a fact that the to good sure is easier that use that the iron partorisca solder in a delivery and the bomb in another, and that it has to do the fast transmission-was to maximice yours suction. It can this produces to be better? Of course, but for a prize, will be to buy another for another bank and perhaps the third like the transmission.
5 / 5
Answered to your questions.
Work. Yes For the occasional work very shabby. Calm can take tips of substitution for him ,Some tips are (DESOL3 Spare Tip). Simply unscrew a tip and ray a new an on ( does not take some rays in a side were ! ) I can calm the cleaned he, to Press a key/of thumb of the advance to upload to a place of lock and apply the little pressure and impulse on top of a same time and he will come averts to clean. PRECAUTION !!!!! It will BE LOADED CRADLE like to be careful. Now it takes partorisca time to heat up likes all old school soldering irons , like the patience is the must .
4 / 5
First of all has received a 30W version, like this perhaps a 40W the version is better. A 30W takes the long time to heat up and was mediocre in better in a container of DIVING has tried desolder. One causes for a bomb is like this far out of a tip that you neither has to that adopt an uncomfortable hand-held place for the use, or go back to two hands like six state use using the iron partorisca solder/hand-held bomb combo. A tip surrounds a nails is desoldering, so only like some pro tools, excepts with a pro the tools can be quite sure that a solders the joint is melted. No like this with east a, so it calms that has to that take on faith that is GOOD to suck, but seldom is that a chance. This means calm each one joints long. A suction looks pertinent, if uncomfortable, but an element to heat leaves to plot to be wished. The utilisation? Nope. Behind to an old method until I can pony on a chance for the pro unit. And for a record has been soldering and desoldering of then has had 16 years and this was rear very a last century.
4 / 5
Really have wanted to this to be the good idea. Unfortunately, doing the plunger desoldering tool that the works in this prize is hard. For thirteen bucks, probably impossible. If you are using the plunger desoldering tool and the iron partorisca solder, a distance among a plunger and a tip is very short, as vacuum is acute and quite strong. It adds three or like this thumbs (the distance of a tip has heated to a fund of a desoldering plunger and a vacuum loses force. A lot of force. That takes one has shot with a separate vacuum the tool often takes three or four with east a. Ossia Especially true if a goodness of component is fat or a solder the joint is big. It could do well in small, slightly soldato near but some casualidades of lifting that the tampon is quite main to to that likes.
4 / 5
Partner of healths Of-Solder Mates,
A TENMA location of the tip of the AMAZON is TENMA 21-8241 DESOLDERING TIP, 2INCH (5 PIECES). $ + Shipping.
Paste & of copy!
And YES! Some tips in yours TENMA 21-8240 is one same like the tips expósitas in a VELLEMEN Of-soldering Bomb VTDESOL3U1.
A location of number/of the course in the AMAZON this: VELLEMAN has BITTEN/DESOL3-VP Vacuum Of-soldering Tip to Bomb
PASTE & of COPY HE!
Is an identical part esatta as in yours Tenma 21-8240.
More still! You take 2 Tips for $ like this of this message on 2/17/2021.
Any way, if I can not find a TENMA leaves of substitution, a VELLEMAN the tips will do a work.
Know this reason have ordered so only a Tool and chanced a VELLEMAN the tips and his scrape on and look identical.
Imagine concealed! It ENJOYS! 'The question has solved!' :) DRAGON7
4 / 5
Any godsend that a lot was to be, but is in BETTER PLOT that regulates it has saldado windy. It has managed a half in an infinity ergodox this has required some changes that takes finals, but is struggling in another half that has used to plot partorisca solder on.
A thing that the people have no really remarked but is the enormous plus - is in plot faster that use that separate tools - dip a sucker, besieges he in a joint, heat, key of press, repeats. Much faster that that it has to use two tools and of the hands, then dipping an iron down to reset a sucker. It has to that it weaves of components to take, the value that considers, especially for a prize.
5 / 5
I work on and collect old radios; this desoldering the tool is perfect to take components of neighbours of form of circuit. Before I have bought this used for the regulate soldering iron and the separate desoldering tool with the cradle loaded plunger (a lot like an included in a Tenma device). This technician has not required so only two hands, but has meant also move an iron out of a solder joint and a desoldering tool to situate quickly enough to prevent a solder of cementation. A Tenma tool so many functions. Disassembly To clean is not intuitive, and any instruction is included - but has the video of Youtube/of Youtube. There is better (I am said) ad desoldering tools there, but run hundreds of dollars. If you are the hobbyist likes are, ossia appropriate perfectly and would have to that be in your bank!
4 / 5
An idea is fantastic has done . It has taken the long time partorisca take hot, has included then, would not found a solder enough to leave a suction to do. I have looked for to add has saldado to do it easier that direct hot and help liquify one that exists has saldado point, helps the little, but he still a lot entirely clear a solder near.
If ossia something precise for an occasional use, could be quite well, then again how is a separate desoldering bomb.
Was 30 more watts, think it would have done very better.

Cela Is not to say is useless or bad, is only no for my needs.
4 / 5
On before impression has done adds. It pulls a solder immediately leaving the grandson has saldado tampon. After using it to clear the pair has saldado the tampons results entirely and absolutely unusable. Some clogs of tip of whole metal with soldering mark to suck anything up. Any quantity of disassembly and wins it cleansing he usable again like the tube is too long and tightened to clear was. On that, a heat of a built on soldering quickly causes a tip of a tube to start with that melts and disintegrating that it means that although you are able to go in there and the cleaned was, a unit is already junk.

Was it of just stay. It is not to value 20 bucks. It is not even value 5. It is still another of these junk has produced on Amazon whose only purpose is to take your money and the frames think the works of product for quite long to run out of a period of turn.
4 / 5
Has read the plot of negative critiques and in spite of these I have imagined would give to try it and turn was bad.

Are happy has given this tool the casualidad. It has done like the charm. Have has had to that desolder a Arduino micro (34 pins), 24 transmissions keys (48 points) and 24 LEDs (48 points) and once has taken a hangs to use has done it fast work of a work. I have tried previously the separate iron and tool of the suction and I have struggled to so only take a micro controller desoldered and is gone in hunts he for the tool has taken. I have not been ready to fall $ 120 on some big rig to the equal that have given this a profit of a doubt and he have paid was.

A thing would change, are wishes a hole was bit it smaller and apt tight around an end of component. That has finalised to do this fact really well is that it touches a hot end to a point has has wanted to desolder, then the movement slightly was-to centre likes leg to compose touched a hot tip, that really melted a solder this fluid by means of a joint and then a suction has done really well.

To good sure would recommend this to any need concealed to desolder the joint. I am pleased enough with east, especially for some prizes.
4 / 5
Buys 'this' as an alternative to release work to the good quality desoldering gun and use it less or so only to desolder the smallest components.
A lot included done the good work in simple two-terminal desoldering components like electrolytic capacitors or 2w resistors.
A better result is obtained with the Desoldering Bomb and the iron to solder.
Another bad creation is that it is very difficult to be able to download a imposición of has beaten.
Could say that has the good creation and a cost is down, but really no at all.
5 / 5
Has died with which around 2 weeks. The cleaner is easy. Maintain the paperclip handy to clear clogs. Has has had to that entirely disassemble the little time but his no the big of the shot. Yesterday I plugged he in and has done the big spark then leaves to do. While to the substitution now. Work and good works. To good sure value of the money but takes interview.

But an interview is in plot less time that eats that using has saldado wick. Commanded some extra pours flat in those use to plot.
4 / 5
This tool is distant a lot the upper-of-lines he- desoldering canal--but uses it often for leaded the components and utmost. Apresamiento awhile To take hot--leave you the little time to leave heats up for better results. One jumps it the loaded bomb is quite typical: no like this easy to click to the place with a delivery, but again, is treating an economic solution here.
Laws more in of the holes of goodnesses of inaugural component in normal PCBs. The main DIVING ICs, etc. Maintain your realistic and calm expectations like this tool.
5 / 5
Like another has described, this does surprisingly well. So better that using solders it windy and he seperate soldering iron. It does years, has used to use the a lot of expensive professional desoldering canal. Not saying this is like this well, but is quite near. Seriously. For occasional by means of hole desoldering, ossia all precise .
5 / 5
Has bought this for desoldering the keyboard of computer of big vintage, to collect his vintage transmissions maquinales. Has question with traditional solder suckers, and can not justify $ 200 in the desoldering the gun will use sparingly for a project of occasional hobby. In this prize, was pleasantly surprised in his can of auction and start of heat. It was able to desolder all 104 transmissions in time records. For hobbyist by means of-hole desoldering, this has not beaten can be in of the lovely terms. I have not had any subjects with clogging with which 208 has saldado points, as we will see, but for now, highly recommends. I can not comment on cleaning it is gone in this time. It will regulate bookmark if this looks for to be a drawn was production.
4 / 5
inconsistent The temperature means sometimes does not suck it all up. It has taken almost 2 hours to desolder 168 connections with this thing. It is faster that so only the iron to solder and wiggling some parts, but can go the fastest way with the wick and an iron. I will give it a thing, is easy to use.
5 / 5
Ossia A lot of gain in his first project with my old NAD preamp king-capping & reparation. They are very impressed and happy has not bought anything more expensive. A key/of the emission of the lock is quell'has bitten fiddly and sometimes need the pair of tries to close properly, but otherwise, this takes a solder perfectly, leaving the good hole, cleaned. Some cover the old fall very was and some new some legislation of slide in, ready to solder. Recommended!
4 / 5
I owe that admit that this does quite well for occasionally take by means of components of hole. I suppose if his wears was quickly, is like this economic so only will buy another. It would recommend coating all an inner mechanism with the fat of good silicon, like this CRC the note of Technician has Given-Electrical Fat with Applicator of Tip of the Precision, .5 Wt Oz
5 / 5
Does well. It is an exact product required when calm the precise. Funds even a goodness of the free factory has saldado and the sucks up without @@subject. The mine so only has a subject, when depressing a plunger he sometimes failsbyo lock in a cocked place and requires to move an iron to solder of a joint.
5 / 5
Has had to send this has retreated the amazon reason when pressing a plunger he a lot of click in place. I have found I have twisted a round of plunger, as his no diverse up could takes to do, but then would do his way behind to a normal place. How it was able the desolder, so only at all like this efficiently has done properly.

Considering if to take another so that it has taken the uselessness .
5 / 5
These looks to be of the esatti was like Velleman VTDESOL3U (Velleman VTDESOL3U Vacuum Desoldering Bombs With Heater 30W ). I have found a manual in Velleman put of United Kingdom. A Tenma has the plus well a difference of prize...(-1 star for value)

In 30Watts, is more paralización leaded solder and not directing-free or type of money has saldado. Work a lot well fix deceptions in by means of-the hole that has saldado. I have used this the desolder the 28-nails ZIF that has dipped in a wrong side of the joint. This desolderer has done a work like this easier that using has saldado wick. I desoldered all 28-the pins in some vain without any loss in suction. Sure, his no the consecrated desolder canal, but clean out of a hole how is opened again, almost 100 of some times have done once in my technician. I have gone back with an iron to solder to release some pins there is stuck to a side and to clean of a zone with soldering wick.

A whole thing is resisted joint for a force to jump created by an interior of cradle of the compression.
1. Tour was can and attended for an iron to cool entirely.
2. Rotate A cup of a plunger 180 terracings to expose the small tab that can pull you against. A cup can so only rotate a way. Good touch.
2. Push a plunger down the bit (any like this far that the latches, says roughly 1/4 way down)
3. The attractive WAS (outward to you or outward out of a rest of an iron) FIRMLY in a tab. It maintains yours another delivery around was a key is to maintain everything to explode like the cradle results free. It takes some force a first time and it dipping I behind near is much easier likes another has written.
5 / 5
When it Operates, work well. When He no, is angering. I think that that my main question is that some joints am trying the desolder is smaller that a hole in a tip of iron, as it does not result in utmost suction. Also, for a first time used it, for perhaps 15 minutes or like this, left of white smoke. It has not been if this was the normal symptom of a first time or the question.
5 / 5
Only finishing desoldering 8 thru pins of hole in 1 minute. This in spite of, a plunger will release a lot quickly if so only touches a key, of here so only 4 stars. So that he , can live with him for now. So only it has to that learn to maintain my toes out of a key until I am ready. Also I need to take used to the weight and the measure of him has compared to regular irons.
4 / 5
Has taken the shot and am pleased absolutely with this product. A suction and wattage are adds. We will see if my feelings change when precise to empty the, this in spite of. Trying burst out of a cylinder does not feel legislation.
5 / 5
With only 5 projects done would say that well of the money. It has done a lot well and it was easy to clean. I have bought one of this resemblance desoldering bombs without an electrical heat and was rubbishes after a first use.
5 / 5
Oh wow! I have bought one of this fact of long time and has had finally the occasion of the give try it. This has taken desoldering on entirely different level. Had some smell when it has taken heat for a first time, but thinks that them will go was next time. The only desire has had control of temperature, but concealed probably would do it 2-3 expensive times..
4 / 5
A desoldering the iron is coming without instructions. Imagining out of a desoldering was easy, but imagining was like this to clean, any so much. Youtube Was the big help here. A piston so only pulls well was, but was quite tight. Hopefully Will take easier after the little cleaner.

In general, is the value adds . Very better and easier that use that my type of old bulb desoldering iron.
5 / 5
Perhaps I have not had some skills partorisca use this iron properly, but has not done partorisca me. It has not created the very quite a lot of suction to take a solder, mainly because it has not gone quite flexible to create to focus around the majority has saldado joint tried to take solder of. I guess a better method to use the stand so only has saldado stir with the tip of the teflon and the separate iron likes him more types. At least this has done better.
4 / 5
For a prize, this iron takes a do one well. I have purchased this iron to solder to pull the pair to act bad relays of a GM5 form in mine E46 M3. It was able to without accidents take both relays without breaking a joint. This is not a the vaccuum iron of bomb, ossia the fashion of syringe desoldering 'vacuum' , meaning press a plunger of syringe down which results the paste and the cradle have uploaded a key of emission when youre ready to suck on a solder, a cradle forces a plunger of syringe on quickly to create the 1 as (or less) period of suction. You owe that maintain that it repeats that process to take a solder. SAFETY GOGGLES to SPEND while using this iron! When you Take for the use in the project and calm begins to go calm quickly could slip up and reload a plunger while an iron still is founding has saldado. Yes, I this and he have shot hot has saldado until my landing of face in my eye of course. Felizmente Has spent to contact which has protected my cornea (clear part of your eye). If I hadnt state spending my contacts would have harm to cause to the mine cornea, and the corneal ulcers take for ever to cure . And the cause is worse state is spent of mine cornea and hurt caused to an interior of my eye. PLEASE learn of the mine stupidity.

Pros:
Estimativas
desolders Amends

Gilipollas:
does not run quite hot to quickly melt sure has saldado. I have had to maintain an iron in the majority of a solder tampons for a long period of time, which could cause hurt the PCBs and components. There is remedied this question to use my weller iron jointly with a tenma to helps it funds a solder faster to the equal that could takes was a faster joint without heating on surrounding components and tracings too much.

Takes the slow time in fully desolder components that there is alot of contacts (relays, chips, etc)

am sure will find use for him again but for a prize, takes a work done for projects here and there that you can not justify buying the true vaccum bomb desoldering stops of iron. If you will be desoldering components often, would recommend to spend of the extra money for the vacuum bombs desoldering iron like this a will not be optimally productive in of the considerations to time.
5 / 5
(1) A tip can be too big to properly of heat by means of-components of hole, and therefore it does not melt a solder for suction.
(2) has invested in a tram desoldering bomb, or the heat-air rework canal.
4 / 5
Looking video on Tube, has learnt on to solder. Some heats of units on enough quickly. Any temp control. Pressing the key down and that presses an emission creates quite a lot of suction to do the good work that takes has saldado. It does not come with the cane to help with cleaning. This would be the plus .
5 / 5
Does very very good. I have been repairing some electronic units of several types, and desoldering has used to be the hassle. This desoldering the gun does very a lot well take a solder to take electronic parts out of neighbours of circuit.
4 / 5
This thing is incredible. No longer require use an individual and windy iron, or wick the frames he so easier.

Pair of notes:
An iron takes more along that has expected to take the temp. It loves it say was roughly 3 minutes before I have thought that that it was quite hot.
A key occasionally bursts behind on a down place. Probably the good idea to maintain the thumb in a plunger while using. More than an annoyance that the subject real.
He spit behind was to solder bit while it use it. After each little near, push and release a vacuum to try and force a solder was. It was able to take by means of 60-70 wall that use this method. I clean properly when you are done before/of next use.

And in general, if this does not suck especially a solder the desolder the particular joint, add the little bit of quota has saldado on.
5 / 5
Economic.
Has arrived quickly
Any instruction.
Easy operation.
Does very better that the wick to take has saldado. It takes more faster.
Easily desoldered several components of the TV PCB.
Plunger Of suction a lot always close to plant, requiring tentativas múltiplas, but finally works. Hard to beat for a prize.
4 / 5
This has done Very better that has expected. For $ 15 it is to fly it. It was able to desolder a NES CPU and PPU with east with relative ease. His no quite like this as well as he desoldering canal (that that can be hundreds of dollars) but is very better that the hand-held bomb.
4 / 5
A vacuum the part there is prendido to do, When I in the first place plugged he in has smoked. It has done then once or two times. Now he doesnt suck on soldering...
5 / 5
Tecla of sucker a lot in fact resists a vacuum @@@knob, as I owe that resist a cradle down with my thumb a whole time. Tip of the metal gradually is taking coated with soldering and there has any a lot of can do roughly that. The random parts of a house take heats like the hell and His constantly burn.

But is economic and sucks has saldado on incredibly well.
4 / 5
Experience partorisca recapping the motherboard. This tool fails partorisca choose on any solder anything.
4 / 5
Like this far like this good. I have bought this when my economic plastic has saldado the sucker has begun clogging on with which each one another desolder. It has saldado wick Is still necessary but this are adds partorisca scrolling of fast component. So only agree to beat a tip in this thing and take the posture. I have melted the few things partorisca leave it only chair in my bank. Tinning A tip will help partorisca result useless.
4 / 5
Turned it on and dip the 5 timer of small partorisca leave heats up. With which five minutes have @@give the smoke gone to derives out of a part where a metal has fulfilled a plastic, together with the bad smell. I envy that they have received the working product.
5 / 5
The element to heat there is prendido partorisca do after roughly twenty desolders. Functionally well, But no very durable
5 / 5
Used it to of-solder two DIVING of 40 pins ICs of the PCB. In a very last pin, a plastic that manacles a plunger snapped that it has caused some jumps some jumps partorisca launch some remaining plastic part in of the multiple directions. This was an end of that. The any needs to of-solder ICs very thick, like this fact partorisca this task.
4 / 5
Very does not take quite hot but knots sodering iron with him.
4 / 5
Has not taken quite hot to melt a solder... Perhaps my product is defective? Included when paired with my iron to solder, this does not stimulate any welding of my joint. It is economic for the reason.
4 / 5
These products do a lot well for some works to solder.
4 / 5
Any instruction, but the work adds. To clean an old to solder out of a chamber of yellow suction, has inserted the screwdriver for behind an iron of plunger of the metal and pryed advances. A bit prying in the each side a work. It has gone back joint easily.👍

Top Customer Reviews: Weller 7874B Manual ...

Rating: 4 out of 5 with 19 ratings
5 / 5
I prefer to use this bomb when only has the small number of tampons in desolder. I Like him his of an edifice of metal. A button is easy to operate with a delivery. It has done well suck sald of PCBs. This is resulting my tool of election when law in of the new projects. Also have the cheap desoldering canal and the sake Hakko pistol. Even so, my new projects can have a bridge or a separate in a something injustice. Very it is not to estimate the to shoot in a heavy duty desoldering squad for one or two hurriedly fixed. Always it has he wick manually, but fulfilling a Weller bombs very book to have around too many. It has done well on through components of hole. This would be the second election of sake if the majority of expensive desoldering the canal is out of your estimativa. It has lined up well during several months now.
5 / 5
This thing sucks to solder really well. Predominately Use to modify joints. Taking covered of piece of the resistors and such, the laws add for this class of work.
5 / 5
Probably one of my favourite sald windy has used. It tends to take blockaded in the bit more often to to one would like him, but clean is not a subject in me. Only it wants the to do when he the precise, and marks. The works add to take solder of small through holes.
5 / 5
How much sald the pot solders it the windy mamma if the balance the windy could suck solder?
3 / 5
The quality adds, A tad expensive. Even so, work very good.
5 / 5
Very well cocked the piston sald windy. Well fact and with suction very good.
5 / 5
There is the cheap some accidents. I have bought this a one am happy these same better laws!
5 / 5
Good edifice. Works very similar in or bought of Radio Shack fact 30 years. I have found another but they have had organism of cheap plastic.
5 / 5
This acts very better that a plastic variant that slope much more.
5 / 5
I prefer to use this bomb when so only have the small number of tampons the desolder. It likes- one construction of metal. A key is easy to operate with a delivery. It has done well sucking has saldado of PCBs. This is resulting my tool of election when doing in of the new projects. Also I have the economic desoldering canal and the good Hakko gun. This in spite of, my new projects can have a bridge or a separate in a something wrong. Really it is not partorisca value the to shoot on a heavy duty desoldering squad partorisca one or two quickly fixed. Always I have wick manually, but finds a Weller bombs a lot of hand partorisca have around too much. It has done well on by means of components of hole. This would be the second good election if the expensive plus desoldering the canal is out of your estimativa. It has on resisted well partorisca several months now.
4 / 5
A desoldering the bomb has done reasonably well. I have done on 2 small circuit near partorisca some purposes of salvaging parts and adding to my census. A subject real only has had was with the tip of a bomb. I have had to that take a joint is to solder points quite hot and sometimes resist an iron to solder in a solder point while sucking out of a solder with a bomb. Needles to say, a heat has begun to deform a bomb' s tip. This has reduced an efficiency of a bomb (likes the game deformed). And tips of the bomb of the substitution is OUTRAGEOUSLY EXPENSIVE thus desoldering bomb.
5 / 5
This thing sucks still to solder really well. Mainly the utilisation to modify joints. It takes covered of chip of the resistors and such, the work adds for this class of work.
4 / 5
What has saldado that can solder the sucker sucks partorisca solder it the windy could suck solder?
4 / 5
I like this in of the applications where felt. It is the powerful few windy and good works to take components out of joints of circuit. It is sturdy and would have to that last the long time. To clean connectors or another irregularly shaped objects, this in spite of, has saldado wick better for me. It uses neither this or solder wick according to an application. To good sure any-the measure returns everything, but the good tool to use appropriately.
4 / 5
Probably one of the mine favourite solders windy has used. It tends to take jammed on has bitten it more often to to one would like, but of the cleaner is not a subject @of mine. So only I love it to do when I the precise, and does. The works add to take has saldado of small by means of holes.
5 / 5
This does a lot take has saldado, but almost require use so many hands to press a plunger down because of an organism of a thing that is like this slick that a whole thing just slides by means of my hand when it tries the one there is rid.

The really could use some texture in the to do it a lot like this slippery.
4 / 5
Unfortunately is too late to return this waste broken of the product. I have bought this to compare to the plastic unit more economic. A plastic one has won delivery down. This unit has done properly roughly 5 times; again a lot like this as well as plastic economic a. With which 5 uses has has had to that the the tear averts to clean and law two times with which conceal. Now a plunger wont click in place.
Please you the 't squanders your time or your money.
5 / 5
Originally has bought to less expensive unit that looked looked. Any Comparison. This unit is weighed more, built better, and work very better. Highly recommend it.
5 / 5
A lovely tool for any one doing routine soldering requiring desoldering qualified. Easy to clean. It has used this same model for years. There is not founding the best one for a money.

Top Customer Reviews: Velleman VTDESOL3U ...

Rating: 4 out of 5 with 50 ratings
4 / 5
Better of-soldering the tool has used! Almost I have not bought this because of some negative critiques, as has thinks that would dip a record directly...

Heats on well, has travesía good and utmost suction. It has cleaned out of each pin/of the hole and you could listen an air by means of a pcb to to hole likes , and a-there is rid. Works a lot on 0.1 spacings like a std 40 connectors of pin.

Of some negative critiques, can say has used the bad. This is not done to be used as to the pencil likes one any-heating some. A key is near a backside! A way resists is (to explain in of the words here) for inaugural yours (right) hand and situating he in your palmera with a push of plunger-down in a same side of your palmera like your thumb. Wrap your hands around that. Your thumb is now well in a key of emission! It controls it likes calm is stabbing a pc together. Perpendicular to plant to a joint, attack perhaps 3 dry, then thumb to use to press a key. Not moving, jerking, subjects for now, etc. So only slightly tinned tampons/of holes with which are done.

To clean, the vendor is bad. A lot of cleanable. Instructions in pkg, but has included the better way... Look Closely in a base/of house where a cane of plunger goes to a black end of a yellow tube. You can see a big plus outside that house the control has the little partition in a cup of a tube of suction. A yellow tube is cradled in an external tube. Utilisation the small flat screwdriver and impulses he slightly and the explosions was - a whole tube. It comes it averts to clean. A clean old toothbrush a plunger well. It resembles all gather in an end of a plunger. Has the light coating of fat, probably paste of silicone, like this yes take to wash you can require to king-apply...

Some instructions in a paper say to pull an end of a plunger out of a house. Any have to Him legustado a way that felt. A method of the screwdriver on is the no-way to force easier.
5 / 5
Possesses the few dollars of value of hundred to solder crew, and ossia some better-estimativas to solder the compraventa has has not done never! It heats like the field and has tonnes to be able to and can easily desolder big by means of-components of hole, pots and same transmissions a measure of your thumb, as well as small material also! A secret? Properly it has beaten a very first pour the calm time heats it on, and treat likes the iron to solder!--ie: Maintain a tip wets with the quota solders while works. Adding has saldado to the together master desolder is the esecret' a lot of-known for some experts because it maintains a fresh joint and flowing more than brittle and plasticized so that a solder the good flow and a joint is cleaned amiably when it press a vacuum key. Also be sure to resist a vertical iron to take good suction when sucking. And to the left repeat me: if you say an iron is not quite hot is BAD! (In 98 of some chances). That need to do instead is adds fresh flow-the core has saldado to a tip of iron--take it all up inside a same tip, then situate an on yours tip by means of-leg of hole the desolder and now a quota has saldado will flow a legislation to heat to some neighbouring--press a vacuum key of sucker and looked! Has has cleaned so only that joint perfectly! Repeat the little more time and a by means of-the component of hole can be so only wiggled well was! Amazing! BETTER Sub$ 100 SPENT has not DONE NEVER IN THE WORLD-WIDE to SOLDER LIKE THIS FAR (and is so only $ 10), and has been in him the moment: Google escommended Soldering Box & Tutorials Tram RC Aircraft Guy' for the chance and calm can find me.

Also, this unit can be cleaned. A light cleaner: with a fully heated iron, quickly press a plunger the little time. It will shoot out of drops to solder these seated on interiors. A heavy cleaner: a vacuum the tube can be take with some force, cure, and the small to half flathead screwdriver. It researches some video of Youtube.
4 / 5
Has ordered this reason has looked a union of the iron to solder and solder it vac has behind used in a 80s-Sure enough is! MI main pet peve of a 80s the version was in the first place you has had to heat with the gun to solder, then dipped the down in the place sure chooses on a solder vac and suck out of an easy, but a lag time among heating and pulling out of a solder the meaning has has had to that you on heat a solder to maintain liquid for period of this transmission. This iteration takes that the @@subject that mean can of-solder included the delicate components easier that add so only a heat to melt a solder. It adds to the calm once take a hangs of him and is all once rid and quickly, salvaging the parts goes quite quickly! A cord is long enough to be usefull, and the field that undresses a tool is quite quickly and easy also, has meant this will continue to be the useful tool until an element to heat gives on-probably several years or more. A tool has the good weight and feels very drawn and done-the really is a combination of the iron to solder and the solder vac... A Pic shows my Old Blue Solder Vac of Radio Shack-the still works are, but has required to substitute my iron to solder, and has seen has thought the 30 watt that has saldado-the hell takes both in a- the law adds, a tip is quite small for SMT work,-but to take change, Eproms, etc, work very a lot of-and returns the regulate soldering tool of iron in place of two, saves that never shrinking Bank to do realestate! It is done in a PRC(Republic of Villages of Cina) but knowing Tandy-so it was a blue a... They are very happy with a tool, his creation. And his action-but has then cut my teeth with some parts has been done of, as pressing a plunger, founding a solder and pressing a key was very familiarised, and having some necessary components on the container he easier that has used to be. If you have not used neither some separate part or this all in a forward, raisin for some motions the little time before you cover he in-any note fumbling with something concealed can burn you when calm is not familiarised with regarding the use! BTW-The foreigner in a picture is the silicone baking foreign of Amazon, are adds to do on-at all takes yours(another that silicone) and he shruggs was hot and solder drips!
4 / 5
Will be sincere with you, for a prize has paid thus desoldering bombs, has not expected the whole plot. The boy has been fooled ... One of some first works used it on take the soufflé IC and was able to take a chip entirely, one first tentativa with some tampons that receives exposure very limited to a heat. Much more that has been expecting! Work like the charm.
Now ... I owe precaution that has to use you technician of descent to take good results. Leave an iron to come until full temperature, sure mark a tip is properly tinned, when a solder is flowed fully, movement a goodness with a tip and then paste the key to draw of a bomb a solder. Always it takes a tip is tinned when the heat is present and is not actively using it. Once the tip is exposed directly to an air for the period of time, will result oxidized and is the efficiency is minorado appreciably.
5 / 5
Excellent quality, but any cane of more cleaned to clean tip. Any extra tip neither, but less badly value a prize. Way, way, the better way that using desoldering braid (but calm still braid of need in of the sure chances of then this can not go everywhere because of him measures... Also it takes 99 to solder but can require take that last bit with braid (true of any type of these desolderers, any so only a subject with this particular product). This will lose his capacity to suck has saldado if no the cleaned was periodically… Ossia very easy to take the bar of metal manually when a plunger is already state released… And simply pulling you… can require the screwdriver to take down the if any one the ones of the little fingers. Then an integer of yellow cylinder the only explosion was… Very easy to clean ... But some instructions to do so it is quite non-existent in a container.

TIP: If you are well in a half of the of-soldering operates it and calm does not have time for the cleaned was… calm usually can recover a suction temporarily for simply compressing it and releasing a time of diverse plunger while it is To the ROVESCIO… Has the big hands can in fact this with a calm rid… You so only really wants to do this if you are literally well in a half of desoldering operates it and you have required so only a better suction to finalise on… Otherwise would want to take a time to simply the cleaned was fully like this mentioned on.

Finally, If after emptying anchors it find that a suction is by train to be missing you of can wants to take the cane of thin metal (the piece of the hanger of the discharge of the metal would do) and insert he to a tip while it is heated up and with a yellow cylinder has take… This will leave you to break any blockage. Calm of course has to that be very careful reason goes to be extremely hot… The majority to time yes calms so only the clean maintenances, calm would not owe that have any question with blockage in a tube of main metal, but one in the law of procedure adds yes calm any never.
5 / 5
Has valued this tool and can say works a lot well. Education Avionics (electronic of aircraft) in the local community university and are an electrical engineer. Although it is not like this quickly like the device that use some trams vacuum bomb, work like this well, and is the fraction of a prize. It can be used with only a hand, which is the goodness adds in a desoldering tools that has the baster bulb (thinks turkey baster) on him. Have vacuum Type to bomb desoldering unit, but am changing these of then is like this easier and convenient to use, and give a same action.
5 / 5
Mina used Weller iron with the tool of plunger of hand-held suction that never done a lot well. This does so only bit it better. His main goodness is that now it calms does not have to that juggle two tools in of the opposite sides of a joint. This in spite of him a lot well clears has spent of-holes and looks to be entirely ineffective when the component is still in place. So only it can not take a solder was. An iron is also so only 30W quite taken the moment to heat up and does not have any controls of the temperature so only maintains to take hotter and hotter. It is so only $ 10 although, I eat...
Thinks that will be to save up for the Hakko FR-300. Although I no by means of-hole rework a lot often having a right tool will do it the breeze.
Modification: after using together with the liberal application of flow, his action has improved a bit. Flow, flow, And more flow! It is still very fantastic, but would say that it clears roughly 85 of some used it together on after adding flow.
4 / 5
Has bought this to desolder transmissions of my keyboard for the reconstruct. It was my first time using it desoldering the bomb but I had seen revises and video of him acting I a lot of have thought like this to give tries it.

The Fact a lot well for a lot of joints! The ones of the that thinks that some heats to pour on enough to melt an old has saldado this in spite of, but so only could be that I have not used any flow. I have melted rosin the core has saldado on an old solder and has helped to melt an old has saldado well.

I desoldered roughly 51 near and was well for the majority of them. My neighbour was for one the majority to separate quite clean until later on. A bomb has begun to the clog to the equal that has cleaned a chamber of cradle. It has done well again but then it clogged after the together pair more. It looks a tip has dried has saldado in him but I am at all thins enough for the press was. I have tried to heat an iron and then using a plunger to kinda swipe molten has saldado was but has not done. A plunger also now free a lot of dulcemente, that degrades a power of suction and it doing very difficult to suck on any solder. Calm alcohol ossia so only after the day of use (3 total of hours) Again, are the beginner as so only could be the poor technician but I do not imagine it would have to that be this difficult with which first use.

Thinks that will look for to use regulate it soldering the iron with the level has saldado windy more than is. A desoldering the looks of bomb has a lot of factors that could go it wrong and ruin his whole functionality. I guess volume that stops of has paid.

Is not all bad, this in spite of. It likes me quell'has said that has done well until him clogged. They are sure with the experience and the technician polished, these questions would be less likely and/or would not arrive . It is also very simple and easy to use and has taken a hangs of him a lot quickly.

If you are in the estimativa, calm call to try it but be mindful that it can attract a lot issues quickly.
4 / 5
Ossia He lifesaver. Saldado On the box and soldato in 16 connector of way to a wrong side of a joint, has been supposition to go in one rear. I have tried to release some nails that I use the normal has saldado windy and braid but could does not direct. It looked on Amazon for something more to help me and has found this desoldering bomb. I asked it was too economic but has thought would give to try it. It has arrived in the pair of days, turned it immediately on, the sinister heats arrive and felizmente take all a solder leaving me to take a connector and king-solder to another side. Calm could any never say that it had done the deception. It is it has pleased really I bought it. It is very built and sturdy, thinks it will last for enough the moment.

A pair of things has discovered that it help him that it takes has saldado:
Left a heat to spend on really very first of the use.
Has had a bit rosin in beat it that has come with this iron to solder (X-Tronic Model 3040-XR3 - 75 Watt that has saldado Canal ), looked to help to touch a desoldering iron to that occasionally. It has done perhaps to focus better?
With the small pin to desolder, besiege an iron in a pin but to a side so that I can see a solder melt in the first place, then move it so that a nails is centred in an iron.
Control an iron in of the right corners to a first joint to suck a solder. Ossia More than entity, has not done well when resisted in a corner.

I to good sure recommend this iron.
5 / 5
Used this to desolder my transmissions of keyboard. 15 minutes to a process when it has prepared one pumps it glob partorisca solder shot out of a tip (sees picture). A solders has fallen probably to a nozzle and has melted. With which roughly 30 minutes of use, a plastic guard was really hot. It has not melted but it was too hot to touch.

Can of the suction diminishes after several uses. I have found that that signals a tip on while preparing and that actuate a bomb clears out of a solder stuck in a tube. Ossia Probably the good idea to do after 2 or 3 joints. This also helps with reducing debris backfire when that uses a suction. But with which 30 near or like this, debris would fall was to all the cost. It looks to be missing of the-the valve of way to prevent welding of falling behind was.

Has mixed feelings in this desoldering bomb. It is the good idea but bad execution. A lot questionable and potentially dangerous for longitude desoldering sessions. Desoldering Is of course dangerous, takes some normal precautions. With this said, does not think that is to say a unsafe device to use, is so only a lot like this of confidence like those use the bomb and iron for separate. Has his place and is perfect in the pinch.
4 / 5
I have bought this device in the April that feigns partorisca the future use is one of these things that knows will require but does not need immediately very today I plugged requires to a desolder the little capacitors and the smoke has begun partorisca exit where a metal and the hard plastic fulfil. I thought it that it would go it to it was of then he was the first use of the time but a smoke has persisted. This in spite of could not find any one has melted separated finally will owe that dismantle this and figure out of that is bad to have of then has lost a window partorisca return this product. Hopefully Can can solve this :(

[UPDATE 6/12/2020]
This possibly can be been the refurbished has left a career of device but has smoked still coming has been blown was in that quickly takes partorisca solder was impressed like this has moved an indication partorisca think I once clean this thing out of a smoke will disappear.
5 / 5
Ossia The idea adds partorisca combine the solder sucker with the iron partorisca solder. But he no any better that using some separate devices. Ossia Very very built but does not take enough solder the goodnesses of free component
of the joint. Enough often it takes to solder of a surface of a joint but no in a hole that in fact the hardest fact to take a component. A tool neither does not resupply quite a lot of suction or a tip is not able to focus was around a solder joint. I have decided to maintain the to see can come up with the way to do better work (hack).
4 / 5
The sum of laws of the what for a prize. Taken roughly 10 minutes to heat up. The sound bit it uncomfortable to resist for the long time and is the bit clunky especially with a rigid cord. Meeting having the question that goes down a plunger with a delivery. Also every time down a plunger is conscious shoots out of hot air and sometimes molten solder. I have found neither it does too well in small has saldado joint. I neither precise use the wick or add bit it more solder his first sucking it up. Considering cleansing, his practically impossible to open. I have it almost broken trying pry the open. No an end of a world of the plot to solder arrivals to fall behind was as you press a plunger down, but no the good creation.

Like his uncomfortable to resist for the long time, a lot last to open to clean, but works well and for a prize to good sure would recommend it.
4 / 5
In yours chance that asks , comes averts to clean, as it does not launch it was so only still!
The sum of laws of the mine for speaker crossovers and in $ 10 will buy the little more, can has not beaten it
Update: this law of what still like a day took it, everything requires upkeep, yes cure of him , will last while calm loves it, extracted likes does not sell him anymore!
4 / 5
Has had this for the few weeks now but so only took around for the try was yesterday. For more desoldering work, thinks that this iron is only bested for this elegant (read: expensive) electrically pumped desoldering irons. It is in plot easier that do with that the no-heated desoldering bomb or wick. You can situate a legislation of nozzle on by means of the goodness of component of hole and melt a solder to take legislation up against a hole to effectively suck a solder was.

Has tried was the well has bitten in an of this generic PCBs has populated with stirs it of components that had connected mainly each one which as another street chunky solder bridges. This thing has done to take components and all this has saldado to the easiest PLOT that some other common methods. Like this easy in fact that the majority of some components has fallen is gone in his own. Awesome!

This has said, any all are adds. An ergonomics is the little has bitten uncomfortable. There it has enough so only a way can resist he to be able to press a plunger down with your thumb and paste a key of emission with your indication of toe, and is not particularly comfortable, but is not the accident that induces neither, as I guess there is concealed.

Then has an appearance of more cleaned. Some instructions vaguely mentions to open he until grandson, but could does not imagine was until seeing it done in youtube (the type pried in a plunger: it does not recommend he). Instead, I have used the screwdriver of flat leaf and wedged among the very totally the obvious breaking among one covers of black end that has a key of emission and a rest of the plastic structure of an iron. Maintain your thumb against a plunger of then is loaded cradle. Calm once avert them to him, is quite directly advances to clean. Ossia Bit it different that some of another no-has heated bombs has used that typically it is self cleaner for having the cane that protrudes out of a tip that the pushes solder was with him. This does not have to that , like this calm neither will open it on more often for the cleaned was, or, likes funds quite effective was to resist a key of emission while quickly pressing down in a plunger to cause molten solder to esneeze' was (be careful when that that, obviously!). Any ideal, but acceptable.

Pros:
Mark desoldering much easier and faster that other common methods
Economic
the tip is electrically grounded

Gilipollas:
A bit uncomfortable ergonomics
A bit procedure of uncomfortable cleansing

has been thinking roughly taking any desoldering tool to do yours yours life easy plus, and does not want to spend of the hundreds of dollars in crew of elegant speciality, this would have to that be in a very upper of your cast. It is more economic that Hakko manual bomb, and suspect easier that use and more effective because of this built-in iron.
5 / 5
Ossia One more windy welding has had to date. The container has arrived quickly. Well fact.
Update: have has had to that the imagine was like this to clean have gone back like this for another description. Leo Comments concealed has said to clean was very hard and some have said that that comes to avert and some have said he the no. has opened links he of another reviewer for the video of Youtube and a video was 25 seconds. The mine has come averts, was VERY EASY to do, very very easy to clean and easy to dip for behind near. I have not used my solder sucker the death and until it was absolutely plugged before I have decided to clean the neither. Quell'Concealed can be reason another there is had questions. I have decided to clean he in a prime minister gives it to comprise that it has required it to it to him.
Has had ANY LOW HEATING or questions of voltage and in fact heats on almost instantly. If it was to estimate a time would say 3 minutes max.
Has taken the rigid copper boss and softly has turned he in a game how was cleaned relatively. I have run also he of one rear where some accesses of bomb and softly turned it. One has saldado had collected in powder and fine particles that I softly scraped with the flathead and the just fall resembled the pieces without endeavour. I have dried all the parts with the part of the mesh and dip the for behind near.
To take averts has dipped a tip in a table, dipped my thumb in a black part that kinda the estacas was where some stops of the plunger when committed (leaves a plunger on and disengaged), has pressed down and there is pulled was and a whole plunger (the yellow part) has burst was easily. To dip has has stuck behind behind in, has pressed down and the snapped behind to plant. Easy. Or Youtube the.
Took so only roughly 6 minutes for the clean and the turn behind on. I owe that finalise this description. It is expecting on me.
4 / 5
There is tinkered with electronic all my life that use him that it solders irons and copper ribbon to desolder together and has known in a sucker/to spend combo for some time but has thought always use the ribbon was a lot of quite until recently when I decide to buy the stand so only has saldado windy. Timing Is all using them and frustrated often taking for ever to desolder a pin. A partner said to buy it combo the unit and I would not cry in frustration anymore. It was a lot! Mina a lot first tentativa there is pulled 100%has saldado of a nails. Then an after another like magic was able to quickly, cleanly, and without accidents components of appeal of joints. You can purchase tips of substitution of the variable measures but I has loved to expect see if in fact it would use this iron and I recommend this iron with certainty.
4 / 5
The Handy works,.. I LOVE it :-) ..,
Sure Mark to Leave it On A Solder the aim A lot the time Enough & Resists Plans in this Zone of Objective Yours doing In
And will do A Work,..
Are the the desire Was 10 Powerful Watts =>40 Watts would be Perfect
But His 30 Watts Does So only Well,
And Sure is Better then No in that has it .. And Or Better then using the Suckers of not Heating Economic :-)
A Photo the v Resupplied is That Of A Model of Real Product That has Received, //=>Velleman VTDESOL3U Vacuum Desoldering the bomb SOLD for Velleman // And SHIPPED FOR
4 / 5
has been using this to disassemble electronic old to salvage the leaves want to, and found those easy to use and work well. A tip is quite big to the equal that would say calm probably will have the hard time with electronic really well, but to take more the things averts or doing the reparations does well. A suction acts quite well and has there is has not had subjects with him like this far. It takes the little extra time for him to properly spent in the regulate soldering gun, but would say for a money is the good compraventa .
5 / 5
A solder sucker for him, is woefully unsuitable. It has saldado Works of braid, but, can be weighed. This, in another hand, looks to do fantastically. I have tried he for of-soldering 5 or 6 components, and was impressed extremely-the entirely take a solder of a leg of component, and some starts of component of a PCB without harm.

According to that cleansing, looks to be quite sincere.

A quality of looks of construction to be very solid. An only drawback sees to arrive to this point is, there is a lot on/was transmission. Obviously, it concealed it does not have any impact in an operation of a unit. They are very pleased with this product like this far!!!
5 / 5
It has done in the pair partorisca be able the inverters and that substitutes a MOSFET is in some joints. I have tried to solder wick and the no heated desoldering the bomb with great difficulty takes some old part. I have ordered one of these and wow! It has done I add. That the saver of time partorisca low $ 10. For a calm prize can any gone bad. A bit delicate to open but yes is cleanable. It shows a video of Youtube. I have ordered so only another for the transmission. Calm can any gone bad for a prize.
5 / 5
Has purchased this for working calm in near of circuit. When I in the first place plugged he in, there is taken on 5 minutes to be quite hot to melt solder.

Has been to use it to take the simple transistor. Hardly it has taken any welding was around a pin. Tried for on 5 minutes that tries to take three pins unsoldered.

Has has had to that finally pause out of my iron to solder and take a transistor that use my old desoldering the bomb concealed is old and falling avert but better fact then this.
4 / 5
Man ossia exactly that has required. Had state that use the separate bomb with my soldiering iron that was the ache in an ass. This the unit has combined is well, has can of good suction and takes abundance quite hot. Pair of tips.
1. It has beaten a first tip of calm uses it.
2. Leave an iron to heat up.
3. Place in that composes and leave to heat he for the pocolos second.

Ossia All precise . Ossia The compraventa solid .
4 / 5
Has been doing electronic reparations of an early 60 east. I have been of hard-frame wired some early days to surface highland reparations now. By means of all some years, plated-thru the holes were always some pocolos of the question. I guess if I have not been like this economic, would buy one of a bank of mark of the name of-solder vacuum unit or one of some hand-held units newer of Cina with a built-in vacuum bomb. Someday, I probably . But until then, ossia that will use. It is surprising. It is very built and work. So only a legislation wattage to maintain of lifting some tampons but quite hot to do more any work. Much easier solders it-wick, which was my old technician . Probably still it has the place to solder wick in some chances so that the maintenances around too many. Has-liked me this tool so much, has bought two of them. I do not know reason. It maintains in alcohol, has some technician has involved to take a better use out of him. A bit those that expert aim you some in Calm tips-Tube. But, it is easily mastered and do a lot well.
5 / 5
Any bad for one VERY ECONOMIC desoldering tool, with emphasis in economic. While he sufficiently well to do simple desoldering works, has a lot shortcomings everything because of his low prize: any on/was transmission, any indication of as this warm , covers quite dulcemente, and has the quite big advance the one of way that can not be used &62;&62; at all &60;&60; partorisca to fine to the work likes them the mountain to surface unless really calm does not concern you roughly that a neighbouring can suffer harm in a process. As I have said, it is economic. A bomb is likes stand-only desoldering bombs (and am not sure he raisin was, as to find parts of substitution). The next time uses it will undermine out of my sensor GONE of temperature to verify it temperature.

So he the occasional need and so only expect use this in of the big parts, then is the value adds . But it does not expect this to do in highland components of the surface!
4 / 5
...A beast! This 30W the unit is big, of the compatible quality with another Velleman produced ( taking those paid for)
would not recommend this for connectors/of boss less than 18ga/5A. Perfecto for a big some, way too big for small some.
A procedure of more cleaned Is not DELICATE, so only requires to plot to force to be applied, and the bit of patience. It reads directions.
5 / 5
This better work that using a normal iron and seperate bomb of suction.
This in spite of takes for ever to heat up. And one first half dozen the time used it an iron emitted smoke and smoke.
Sadly does not have to that it weaves of desoldering irons in this row of prize. So it love the better quality rework iron, has to spend at least 2-3 times so much.
4 / 5
This thing takes the moment to heat up but is lifesaver needs to take solder. It has not been that to empty went it still but has saved the pair of projects for me for a lot cleanly take all a solder. It Likes him one everything in of one draws, iron and windy all in a. I have used previously to the sucker with mine regulates to solder iron, these works of units much more efficiently and entirely. Highly recommended for DIY build of electronic of the studio.

Good music to everything!
4 / 5
Economic product. I doubt it is paste the plenary 35watts. If your working on anything besides 60/40 then calm to good sure will require to flow in 60/40 before you can touch he with east.

Has bought this just to do quickly by means of hole desolder work occasionally. It is quite decent but still there is not founding the way to take a bomb of an iron, which is odd.
5 / 5
Ossia A awesome tool partorisca of-soldering an occasional thing. After dipping the few hours of his use, a suction has begun to fall and a tip has begun to warp.

Cleansing is hard and the time that eats. If it is not for the cleaned will not do and can do the disorder.

Sometimes a recoil of a piston of suction would cause a tip to bounce to a joint of circuit has done on, breaking the trace.

For the occasional use are adds! If I need to of-solder often, spend of the money for him vacuum of-soldering canal. Ossia That has done.
4 / 5
I have required the no-on the earliest products that was it desolderers without an iron, and this returns a bill amiably. Has a profit added of both the approximation partorisca suck (the normal way to use he) and a way I use when desoldering headed of pin out of joints, which is the in the first place take a plastic leeve' of some pins, then press them was partorisca depress a key more than trying to suck a solder was. This does marvels! A hot air of interior expels a solder and pin of a hole more than rushing the fresh air in that I fries a solders. So that it has not been that is to draw partorisca be used... But I adds that way! It considers it the characteristic of prize.
5 / 5
Has not known that a lot this would do so that there is never has used to the to anything likes before, but of laws partorisca surprise well. It is so only 30 watts but concealed is sufficient to melt solder in roughly 2 seconds. Like These works are depresses a plunger, melt solder and key of press that the emissions sucks on soldering. A solders the joint is cleaned. Wow
4 / 5
This unit is the heated (more like this WARM) version of bombs of basic suction. The good idea but the bad implementation likes so only doesnt of work. He the fact he 60W or main and could do. But utilisations this unit, agrees partorisca BEAT YOUR TIPS folks... All soldering the tools would owe that be thinned when any into use, trust up this.
5 / 5
Punches On his weight.

Partorisca Clean:

Presses a plunger down until he clique.
Where Some slides of plunger against an external sleeve, uses the thin bladed screwdriver.

Pry Softly Go in plunger and external sleeve.

The yellow chamber would have to that begin to the impulse was.

Maintains thumb on key of plunger, or this will launch it everywhere.

Disassembles all the parts and cleaned.

When reassembling, Remarks an orientation of one the chamber against an external sleeve.

Would owe that take 5 minutes less, beginning to finalise.
5 / 5
Ossia The add desoldering tool for his prize. There are two things to maintain import while using it, this in spite of. 1) it Takes the moment to heat on - much more that my iron done. It covers he in and the give the good 5 minutes before it try the use . 2) calm has it that resists entirely vertically in a joint is trying desolder. It has to that be able to do the very quite focus around a joint for a suction to do. It hastens down a plunger, dipped a tip vertically in a joint, give it the pair of seconds to melt a solder, then press a key.
5 / 5
I supposition does not have to that it has expected a lot the $ 16 30W desoldering the tool but I expected it to at least take quite hot to melt a solder enough for a vacuum partorisca pull a solder out of a joint.

Melt a solder the surface but ossia roughly he -- some rests to compose firmly soldered. Still after using my iron partorisca solder to take a component of a PCB this device still would not pull a solder out of a highland hole.

After trying 3-4 different times in of the different components purchased it of then he roughly done 5 weeks have decided to write was likes the decision of compraventa bad.
5 / 5
Ossia So only the light improvement in the normal has saldado windy. A question that has is that it does not dip was quite hot to desolder the things have attached to the plan of big earth or with another heat that subject of tanks, but still adds some consolation by other chances. To take anything really calm a lot is that it goes to have that spends $ 200+ in the serious desoldering gun.

Another question with him is that there it does not look to be any way to open he until the grandson went it or take anything that has taken accidentally sucked in, as it would recommend against using he with SMD components especially.
5 / 5
Like the forward avionics technology of bank, are use to use professional note desoldering canal. Those typically cost among 300 and 500 dollars. Any practical for a house hobbyist. My experience with jumping loaded and fashionable tools of the bulb has a lot of be disappointing. This device was easy to use and very cost effective.
4 / 5
Enough adds it little desoldering iron in an economic. They are not the professional and mainly do soldering works like him hobbyist of then I like modding old school gaming console and has not loved to spend to plot of money in the Hako or canal looked still. After trying varied other methods and produced, am pleased really with some results these harvests of device. Very easy to use, the suctions has saldado enough effectively and in general simply the work adds.
4 / 5
Are the quite clumsy hand with the iron partorisca solder. I have very destroyed the joint of circuit for any prendiendo the attention where has situated components. This law adds. Work with a delivery and leaves the clean hole with the tinned the left behind tampon. It has saved already the project or two.
4 / 5
Seriously? You see the one who economic ossia? And work ASTONISHINGLY well! If you are use to your iron that hot up in 20 seconds, then learn the patience causes this takes the pocolos small partorisca take the temp, but once his there, his perfect partorisca desoldering components... If you are doing with directing free solder then could require add the little leaded has saldado partorisca take it well and liquified. The hate favours it free has saldado, thinks that is cruel that is to force partorisca use he for our legislators.
4 / 5
Looked the upgrade my manual has saldado the bomb to something concealed would heat a work and suck a solder, as I have bought this. My only complaints would be the scarce is really big and the smallest tips are not at present available. Also take a reservoir partorisca clean out of a solder is more difficult that thought it /would have to that be. In general he a work, sucks a solder and he he all really well.
4 / 5
There has been sucedido of zero with east. I have tried all could, comprising that I clean a tip, tinning the, adding fresh has saldado to a contact, etc. He so only taken quite hot in a tip to hardly sometimes melt solder. A question has had was that it has taken SÚPER HOT APPROXIMATIONS a boss, to a point could does not resist, and no very hot in a tip.
4 / 5
Has done adds for the short time. Some wears of tip out of far too quickly, and the costs of new tip roughly the averages so as a whole iron. Also I need to be cleaned was with which and often during each use. The cleaner is not exactly hard but to good sure is annoying. A temperature is also a lot down. When Quell'using calm in the joint of dual discharge has to that resist an iron in a remote joint longer that I am comfortable with, to suck all a solder by means of a joint. If any timed perfectly, this can cause you the overheat and traces of impulse. Like this usual, takings which pays stops. Ossia The economic desoldering iron and extracted like such.
4 / 5
Has chosen east a, reason he on 110V, and the connection of earth is integrated in a cord of power for easy connection. A connection of earth reads 0.2 Ohm in my metre of equivalent. In a metre to be able to, this bomb has given 24W reading. It takes the minute or two to achieve working temperature. It achieves 300C in a tip, the part at the head of a boss is hot to touch, the averages a thumb was is WELL.

With which achieves working temperature, work well. I tinted a tip for good thermal coupling, was easy to beat with rosin flow. A bomb is tight air , but the mine is very hard to dissemble to clean, are still to open he for following a manual. 300C is well for PCB, some bombs have not broken PCB in my test(20 seconds to contact PCB).

In general, work like this expected, thumbs up.
4 / 5
This thing is the godsend for desoldering works. Coming from an old Radio Shack type of hule of bulb desoldering iron, this a fact takes separates the breeze! Any accidentally spraying molten solder during your joint. No more requiring 3 tries to take a whole has saldado blob reason does not have sufficient suction. The ones of-has populated 30 components of the 4x6 jointed of circuit downwards 5 minutes. This iron is an indispensable part of my bank to do now. I recommended it to the handful of friends those who have the turn has bought one and loves the hips. If calm at present is using neither a hule old-bulb desoldering iron or (gasp) the standalone has saldado windy that reads in tandem with the iron to solder, chooses on one of these. Calm will not complain it .
4 / 5
Takes roughly 5 minutes to heat up but taking to the pertinent temperature to desolder easily. A suction was excellent and has cleaned relatively well. It was very impressed likes has been expecting to use this once and toss the reason a prize was like this down.
5 / 5
Is of-soldering the tool is quite a lot of fact and can learn like this to use he to verify was some of some other descriptions written on the here. I do not go to repeat the one who another has written, like this do your investigation and go for him!
4 / 5
Does a lot well holes like this cleaned. I need to rooster he for each use then causes it after going in place. A cube where a solder goes is easy to clean with which know to find that in an in of the instructions. But I require the cleaned often or a suction far very happy
4 / 5
This has done really well in recapping train of audio of the vintage. Sooo Much easier that a wick and wiggle method! I have not tried disassembling he to clean still, but with which desoldering 50 or like this spent, still is doing well. It is of entity to add some quotas solder in a first tip to begin. This is not required every time calms once begin to take multiple parts, so only add more if an old has saldado does not flow quickly.

Top Customer Reviews: Solder Sucker ...

Rating: 4 out of 5 with 15 ratings
5 / 5
Desoldering The bomb has done very well partorisca me desoldering small components in the joint of circuit. Easy to use and required very little cleaning. A pliers is also very acute, he doing easy to cut a Desoldering wick. In general I am very satisfied with this compraventa and can recommend it to any to to which likes DIY of electronic.
5 / 5
Exactly everything of some elements that has required in the alone order. Some snips are surprisingly treble to the equal that have stuck with them many times already but also does perfectly partorisca some small bosses that they are by train partorisca use them paralizaciones. It has saldado The windy work adds so that I need stops.
Also has taken a product surprisingly quickly. I have ordered with a free that ships how was 5-7 days and I took it in fact a next day.
5 / 5
All the world-wide the one who soldering would have to that have this. I add little tool has surplus to solder and need to take some or so only wants to clean up has used together ossia a tool to have , Pliers is also a lot convenient to cut a desoldering wick. It recommends!
4 / 5
You the elements are not a better quality, but partorisca $ 10, can very really complain. A sucker takes a work done the majority of a time, although the desire has comprised the soft tip partorisca leave for scrollings more precise. Some cutters of boss... Yard. They are not quality very good or has included lined on perfectly, but take a work done. If you are looking for the provisional solution while it save on partorisca the box of the better tool, ossia a correct election !
4 / 5
I any a lot of soldering but TRY fix the things broken when I can like this partorisca me ossia exactly that has expected some snips are good and a lot of gains would not try and cut anything to heavy with them the dreads could not remain triple, a sucker a work but is a lot near dipped cheaply (mostly plastic ) soldering is an each one once and the work for the moment these are economic and the law adds slowly on soldering more than the pair times the year could wants to invest in the better sucker
4 / 5
has used the plot partorisca solder suckers. This one better that the majority. State using he for the few months, and looks to be that it resists on well, and maintaining suction. Desoldering wick Very convenient to take a solder in a small zone, which a lot improves an efficiency of work. A matching that short pliers is very acute and can be easily cut of things, the very good soldering insiemi of tool, highly recommended!
4 / 5
Exactly everything of some elements that has required in the alone order. Some snips are surprisingly treble to the equal that have stuck with them many times already but also does perfectly for some small bosses that they are by train to use them paralizaciones. It has saldado The windy work adds so that I need stops.
Also has taken a product surprisingly quickly. I have ordered with a free that ships how was 5-7 days and I took it in fact a next day.
4 / 5
Has taken this just for a wick and snips. I have not used a solder sucker still, as it can not say a lot in that.
A wick that expect and some snips are good and treble. I add for contact of points of cutting/tiny bosses.
5 / 5
Some works of windy well. Any as well as my measure fill a. There is the reason a lot situates concealed sells these some sell in 3 or 4 bands. They are sure he wont last. Some jump of cutters there is broken literally some first time used it.
4 / 5
Very so only has flown recently my stock exchange of tool. I require the substitution has saldado windy. It was sceptic at the beginning because of a prize but I has been surprised with a power of suction of this tool. It is the good substitution .
4 / 5
All the like this expected work, but feels like his Materials of the smallest quality. This in spite of, is down $ 10, and so only need this for projects from time to time, likes work for me.
5 / 5
A wick is horrible probably the brass when copper is required.
The windy is a lot
the cutter is a lot of
5 / 5
Very a lot sucking can at all. But the cutters look well.
4 / 5
This bomb is easy to use and works so only well. I give 4 stars partorisca suction as it is not a better option partorisca SMD capacitors in some pocolos tight places. The law adds stops by means of-components of hole
4 / 5
has not used the mine but my partner has one and he was easy to use, cleaned and has loved the so much that has bought an I.

Top Customer Reviews: MOGAOPI Solder Wick ...

Rating: 4 out of 5 with 7 ratings
4 / 5
It has done partorisca roughly 10 - 12 cycles, then a mechanism partorisca jump that resupplies a suction has broken. I have listened it goes it has pressed like this a plunger down. Totally useless with which roughly 10 minutes of use. It does not squander your money.
4 / 5
Have come partorisca a solder wick, remained partorisca a solder windy

leaves of the stray airline of my box of tool, has ordered this on and is adds.

Solders it wick works perfectly partorisca clean on the PCB, a solders the windy is order too

5 stars sure
5 / 5
has Used this to of-solder some engines of any in the gm dashboard.
Easy to use, has done well.
4 / 5
This HAS COME SO ONLY with a solder sucker, at all more.
5 / 5
Has had the project partorisca solder with the pocolos something bad, has looked for to use so much a bomb and a wick and has done partorisca me. Any totally sure the one who a black tube was paralización , this in spite of.
5 / 5
Does a lot well and is not to powerful that appeals a trace of some joint
5 / 5
has Arrived before fact expected , fantastic! And has had included the free present in him, which was the tampon has used partorisca clean my iron with. It will be partorisca purchase of this vendor again!