Trending Engine Compression Gauges Products

What is Engine Compression Gauges?


Top Customer Reviews: BETOOLL HW0130 8pcs ...

Rating: 4 out of 5 with 52 ratings
4 / 5 Fiona
It take my set hurriedly and that is to say the very good container . Everything is very contingent. I have tried you are a same day took it. The measures are a lot of all apt well. Alas take it an apparently defective gauge or valve of emission of the pressure. I have tried three different engines. One has thought to be defective and two that is to say very well with low hours and hurriedly principle. All has recorded enough 25 psi.

Has contacted a vendor and he have asked the few questions and had me roads lucidas the picture. After the days of offer of pair the road me the box of substitution. It have been happy with just a gauge. But I routed join me whole together. I have said if a walnut one has verified was subjects another backside. It says that it was not necessary.

A walnut one has entered hurriedly and has verified enters some same 3 machines and the compatible results taken. As I am satisfied with my set. Included when I go in some tents of the big boxes take defective materials sometimes. A mark well and this mass of the vendor done. Knowing that it would buy it to it he of him again.
2 / 5 Diane
I can pose this compression declares in a same cylinder 3 times in the row and taken 3 wildly different readings every time. I can live with the compression declares in these signals to price concealed is not 100% accurate while it is consistently inaccurate. That is to say more to good sure That the no. IS too bad so that another that those some looks of quality to be fantastic. Hoses of good quality and fittings...Etc.
4 / 5 Lyndsay
A box contains each what so pointed/announced, and side very less than some comparable options. Also the comprised was the procedure has detailed to do the test of compression.

IS generally well with mechanical material, although this was a first time has done the test of compression.
Required of tests of the compression to be done with a hot engine. A nut of adapters of covers he in a hose of pressure manually, and these necessities of connection to be very and tight. If it is not quite tight, a heat of a leader of cylinder can develop some nuts in an adapter of brass, in the hablador to bond in the a lot of inferior in a hole of cover and then only some beginnings of hose. I ask me that I have learnt this. It was able to back an adapter has been with the screwdriver, then tensed the in a hose with pliers, and all was very afterwards concealed. It averts this deception of the novice and you would have to when being well to go - but the message to look in a procedure of test would have been well. Some of some boxes more the types have the hose of pressure for each measure of hole of covers he that prevents this problem, but while you are careful is not the big roads.

Of course has learnt also that the engine of my cart has compression very bad, which are the bummer, but classify of has expected concealed and is not fault of a box.
1 / 5 Barbara
CE GAUGE IS CRAPS. A fittings and the box is well, but a gauge is has been for 30 PSI!!!! My outboard wouldnt included be able to run in a psi said that it was in, even so run well. I corss verified with the gauge of the artfice and to the era has been for 30PSI!
5 / 5 Adelaida
A lot of options of connection. A hose and the look endways very done and sudden. Enough very that-in the guide included that quite matched what a type experimented in them the the car forums have suggested. Pressure of gauge of controls firmly so yes is running some tests for you can crank of a chair of engine without concerning quite not taking an accurate wnd read for a beginning of time and controls was.
3 / 5 Tyree
A declare am add, and easy to use, good quality. Some adapters in or another hand is terrible. If you it the amour has to find it the road in not destroying your leader of cylinder while it takes an adapter that failed to unscrew or has broken included was while unscrewing, advanced and use these. Otherwise Saves time and money and buys some hex adapters of cape so that or does not unscrew with a hose, only can take thin the long wall achieves socket and the take was.
5 / 5 Carmella
For a prize, this is doing add, has done only one compares against the type those uses accident -on, and same results. He that bad these begins of calibration I sneeze in the? Only lucky volume with the 'a lot of or', can not say, but that is been my experience so far.
5 / 5 Melonie
Alas no longer have mine 'very' gauge to compare a precision, but research to be in right. Already paid for him in a first diagnostic required it. It can any one complain in that!
1 / 5 Toshia
It forgets to do my description. The prey of law after the month. Having a capacity even so to change the measures of nut was awesome, but a gauge is the joke. For an only posed money the eschew the and has bought one in the some place more.
2 / 5 Gaston
It tries to try a compression in mine 97 F150 but could not take this to thread in some holes of covers. Has the shoulder that tends to take in a bloc. No very well it design it. Work of better May in the small plus 4 cylinder with more accessable carried.
5 / 5 Jaleesa
Used partorisca a first time the weeks of pair after a window of turn has closed. Read down 50 psi in the known good engine. Tried with the known a lot declare and has taken 90 psi. This is not well.
4 / 5 Antoine
A lot of options of connection. A hose and aims it look very done and rugged. Enough very that-to drive comprised that quite matched that one has experienced writes in them the car forums have suggested. Gauge Pressure of controls firmly like this yes is running some tests for you can crank of a chair of engine without concerning roughly not taking an attentive wnd reading for a start of time and the verify was.
5 / 5 Jonah
The Fact for me. You take the main readings with main sized pistons. Precise compare serious trimmer readings of pressure of the piston with another series trimmer readings of pressure of the piston of a same measure, no the V-8.
5 / 5 Milan
Unfortunately no longer have my 'a lot of' gauge to compare an accuracy, but looks to be in legislations. Already paid for him in a first diagnostic required it. It can not complain in that!
5 / 5 Tim
Looks well. It has not used the closing. Received to the equal that has announced.
4 / 5 Derrick
Looks quite attentive like this far. Access each engine has tried, Sleds, ATVs, Cars and Trucks
5 / 5 Toi
I have ordered this tool partorisca diagnose my boss gasket subject with toyota tacoma and bingo. It is I gave some results every time consistently and paid of a cost.
4 / 5 Erline
Partorisca A prize, this is doing add, has done so only one compares against the type that use him snap-on, and same results. He this bad this exits of calibration I sneeze on that? Only lucky volume with the 'a lot of one', can not say, but this is been my experience like this far.
5 / 5 Lamont
Wants to all in this element he exactly that has has wanted to he partorisca
Thank you
Leandz
5 / 5 Angelita
A compression gauge has done adds and among the good plastic chance for storage. And in the prize adds. Shopping again
5 / 5 Darcey
has received my neighbour quickly and ossia the very good container . Everything is a lot is returned. I tried it it was a same day received it. The measures are a lot of all the returns well. Unfortunately it take an apparently defective gauge or valve of emission of the pressure. I have tried three different engines. One has thought to be defective and two ossia a lot well with low hours and quickly beginning. All has registered roughly 25 psi.

Has contacted a vendor and he have asked the few questions and had send the picture. After the days of offer of pair to send me the box of substitution. It have been happy with just a gauge. But I sent a together integer. I have said if a new one has verified was would send another backside. It says that the has not been necessary.

A new one is gone in quickly and has verified among one same 3 cars and the compatible results took. As I am satisfied with my together. Included when I go to some tents of big box defective material volume sometimes. A mark well and this vendor has done too much. Knowing that it would buy it he of him again.
4 / 5 Angeline
A declares does not have the valve (e.g. Simple schrader valve) in an end of boss of the cylinder of a hose likes a lot another compression testers. Like the result, a reading of pressure is affected for an empty volume in a hose. Ossia The built in inaccuracy, goes down it a psi reading, and was probably currency minus-two same stars. Then when I tried it using an adapter of boss of cone of hule against my hose of the compressor of the air aims the much lower reading that compressor of mine gauge (Declares Dial = 75psi, Compressor Gauge = 100psi. Minus A more star for that. I gave it an extra star reason some arrivals of hose ties concealed to a compression gauge the dial has connected well until a coupler in mine in mine hose of compressor of the air so that I can do filters down looks for to use a hose of boxes and some adapters of hole of sparking plug of boxes. Ossia The characteristic useful mine I so that launchings cleaned-two stars in this box to try of the compression. In general this in spite of, is not the very good compression tool to try.
4 / 5 Nikia
The a lot of solid fact and functionall. If there is unusually to the big sparking plug bores everything would require is some discharge of the hule main can easily cut to measure. Or some Duct the tape has.
5 / 5 Quintin
A box was more than that I has expected, very happy with him.
5 / 5 Martin
Can dip this compression declares in a same cylinder 3 times in the row and take 3 wildly different readings every time. I can live with the compression declares in these signals of prize concealed is not 100 attentive while it is consistently inaccurate. Ossia More to good sure no. That it is too bad because another that those some looks of qualities partorisca be fantastic. Hoses of good quality and .
5 / 5 Melynda
Ossia The tool that would have to be a bit attentive. It do not take on 75psi with hose and would not take on 90 psi with tube. Tried same bicycle esatta with mine another testers and took on 150. It sees photo.
4 / 5 Carolynn
THIS GAUGE Is CRAPS. A fittings and the box is well, but a gauge is has gone by 30 PSI!!!! My outboard wouldnt included be able to run in a psi says that it was in, this in spite of course well. I corss verified with the craftsman gauge and was has gone by 30PSI!
4 / 5 Rowena
A box contains all like this pointed/announced, and side much less of some comparable options. Also it include it was the procedure detailed partorisca do the test of compression.

Are generally well with material maquinal, although this was a first time has treated the test of compression.
Need of tests of the compression partorisca be treated with a hot engine. An edge of adapters of the sparking plug to a hose of pressure manually, and these needs of connection partorisca be a lot and tight. If it is not quite tight, a heat of a boss of cylinder can develop some edges in an adapter of brass, in the hablador to stick deep down in a hole of sparking plug and then so only a regime of hose. I ask as I have learnt this. It was able to back an adapter was with the screwdriver, it presionó then the hose with pliers, and all was a lot with which conceal. Avert this deception of the novice and you would have to that be good to go - but the message to look in a procedure of test would have been well. Some of some boxes more the types have the hose of pressure for each measure of hole of the sparking plug that would prevent this question, but while you are careful is not to treat it big.

Of course has learnt also that the engine of my car has compression really bad, which is the bummer, but I class of has expected concealed and is not fault of a box.
4 / 5 Lecia
The car of my edges has taken to crap it on the, while driving down a street. We have known he the misfire in cylinder 3, but looks that some coils and cover them was a lot. Have has loved the govern out of the subject of compression, before we begin to substitute other things. Well, this handy dandybtool governed in a subject of compression. Time to dip the new engine in a thing. Tried all some cylinders and this tool looks very attentive, so only aiming a 3rd cylinder as when being bad. It gives the graces for the effective and easy cost to verify out of our situation.
5 / 5 Susie
Gauge Stops In 126 psi. On 3 separate engines. Two desquels is very known . All three start of engines and ran perfectly. Any way is 126 psi.
5 / 5 Monty
Decently Done for a prize. Totally inaccurate. Law 50 psi down. Verified the against two another gauges. No really well for anything when being that far it go.
5 / 5 Nola
Although this product was a lot of appealing; when being easy to use and of good quality, is inaccurate. I tried it on the yz 125 this there has been the upper end recently reconstructed, the ttr 125, and another ttr 125 with compression a lot down. His all hovered so only on 50psi. It maintains it imports I have followed some instructions.
4 / 5 Maynard
So much an adapter of the cylinder and the line of hule concealed goes to is threaded a same direction, which the cause to come averts in an is stuck with an adapter in a cilindro.un the adapter would owe that it has been threaded with edges of sinister direction, as when you go for the take was does not come aside,or dip the hex hoards in calm so much could use the socket for the take was.
5 / 5 Andria
A declare is add, and easy to use, good quality. Some adapters in another hand are terrible. If you want to have it that finds the way to not destroying your boss of cylinder while it takes an adapter that failed partorisca unscrew or has broken included was while unscrewing, goes advance and use these. Otherwise Save you time and money and buy some hex adapters of boss so that if a does not unscrew with a hose, can so only grab thins the wall a lot the time achieves socket and the take was.
5 / 5 Denis
Has better had not purchasing this unless it plan the use immediately. With which 4 month of having this in mine shelves unused he rad on 60 lbs less than the mine another quality declares. A reason has bought this one east that avenges with 4 different adapters, but does not have quotes attentive readings at all. Too late partorisca return:(
4 / 5 Sallie
the piece was useless of a start has tried the cylinder and this a bed 30psi when I have used the attentive piece has read 105 does not buy this POS
4 / 5 Lela
has not done in a prime minister tries, taking stuck on 125psi in of the different engines.
5 / 5 Gina
Ossia The tool adds partorisca any that wants to verify compression in his engines. Used the in my RV and the law adds and was attentive. Goodbye Partorisca Of the money.
5 / 5 Ira
I hate partorisca be this type, but this thing was the piece of rubbish partorisca me. A valve of the emission of the compression has broken on me with which a second use, although it act left still partorisca press the nail to a valve of control, he later then totally the explosion was all hover and failed partorisca resist compression. It spends an extra $ 30 and take the decent box.
5 / 5 Dillon
Has forgotten partorisca do my description. The prisoner that does after the month. Having a capacity this in spite of partorisca change the measures of edge was awesome, but a gauge is the joke. Partorisca Of the money I so only dipped averts it and has bought one to somewhere more.
4 / 5 Cherri
Rubbish. The inaccurate way. It has had to that pursue me my row in the reparation of a ATV has aimed 50psi to the equal that have maintained to substitute parts. It has given finally on and it has run an engine in a compression said and has utmost course! A declare now tip my ATV is running on 25 psi!!! Haha unbelievable Feels better that when it was new. I any economic is gone in of the tools anymore sure.
4 / 5 Cynthia
Does well for a prize. No the appearance to last very long, but in a prize has paid am not complaining. Tried in the engines of dozen like this far, still doing like the field and died in attentive.
4 / 5 Raelene
I have bought this partorisca try a compression of cylinder of mine 2003 King of street. I have read some revises partorisca question accuracy. This was VERY SIMPLE the setup and use. I have run a test in the each cylinder 3 times and has received an exact same result every time, like this according to which can say, the accuracy is not a subject with this together. Some looks of qualities partorisca be very good and a machined the parts are well has done. I recommend.
5 / 5 Christena
Uses this mainly in mine V6 outboard. The sleeve comes with multiple sized adapters, but has not required partorisca use any of them. It likes a fast connects partorisca return for a gauge. Easy to use and would purchase again.
5 / 5 Laree
Partorisca An occasional user looked neither come with any a lot of the times achieve adapters that is as required partorisca my ford. It has had to that buy one for separate. Another then this looked to do like this drawn that.
4 / 5 Stefania
Has has not used never a forward, but this box has been next day rid still free, and has all could require. It can not verify accuracy, but the results look reasonable.
5 / 5 Jay
Has bought this the months of pair , has not taken for the use until this weekend spent. Not even it can it take to return in some pertinent edges of a socket of sparking plug. After using the different adapter any one has comprised. I have directed to take it to do except would not go in 50psi. I have finalised to rent one in my tent of part of local car and gave on 100psi differentiates to read. I can not return he because of what time is been of then bought it.
4 / 5 Brenna
There looks to be a subject with a plastic box comes with, the mine there has been the harm (whole in plastic) which is more like defect of production (fusion). Another that that a value of tool of the money, will maintain it.
4 / 5 Owen
Inconsistent In of the measures! The multiple results in the cylinder included has compared the Mac gauge, this gauge is unknowably on 30psi was. QC Is required. Any included loves spent of mine of the waste of time he behind. Any some first time have had his lacking products.
4 / 5 Emmy
Has done exactly to the equal that has expected. The product has had a lot of record and arrival and has done exactly as it has expected. I do not have the way to verify the accuracy but some results were in a row has expected.
5 / 5 Beth
This element looks big quality and has a resupplied of adapters that is well. This in spite of, a gauge has not done when I finally taken around to use wrist on and down like this engine cranked and would not resist never the value. Unfortunately, I have not taken around for the try was until after a 30 window to return like this now am stuck with him.
4 / 5 Rosemary
Tried to try a compression in mine 97 F150 but could not take this to edge in some holes of sparking plug. Has the shoulder that tends to take in a blockade. No very well you draw it. Work of better May in the small plus 4 cylinder with more accessable spent.

Top Customer Reviews: 8PCS Professional ...

Rating: 3 out of 5 with 42 ratings
1 / 5 Winnie
Results of the compression compared in 3 chainsaws against the compression of the mark of known sake declares, and this unit has failed miserably. My bomb of saws in 150, 165, and 205psi in a acquaintance a lot declare, which matches up with figures of the factory fulfilled by a respective model chainsaws forms well. C declares was of a mark for enough bit it. Tan Very time while I know that it is not an accurate representation of PSI, is usable I supposition.
Like An example, my Dolmar 7900 bombs 165psi. C declares has aimed 120psi...This saw ails run yes at all in this low of the compression. The piston and the cylinder are the form adds while it has had one saw averts.
1 / 5 Marcia
Everything needs to try the compression with a lot of sized adapters and connectors, each ordered in the case of convenient plastic.
A metre is the mere dial with the needle these points in an apparently random number so purportedly the compression measured. A result is the reading of compression that is extremely inaccurate and absolutely useless. But a case is well.
1 / 5 Assunta
Any compraventa... It does not read correct. Around 8.00 it ships to return. Any compraventa.
2 / 5 Nerissa
It does not look to do at the beginning uses a right of test of the compression in a box only could take 60 pounds of the same compression snowmobile with the compression of O'Reilly declares has had the hundred and twenty pounds for any reason have tried to use the much more the time and he dulcemente begun to do properly create now is quite accurate
1 / 5 Idell
Of the that Buy this need PSI precision. A unit I recived recorded consistantly 20 PSI lower this was real. I have tried this guage against two another compression of different manufacturers that flavours guages to verify a innacurate readings.
1 / 5 Dixie
This reads quite 95 psi for both cylinders. A gauge of the compression has trusted reads quite 150 psi for a same motorcycle.

Is trying Finds that the cylinder has low compression, this gauge will do. But a numerical psi is useless. I have to return this.
4 / 5 Hilda
Declare The box is cual required, well enough for an use has limited will give it. The looks of boxes to be complete and adapt in several measures of covers. It tries the Chinese ATV 150cc automotive.
3 / 5 Deloras
They , but the case any a quality of adapters or gauge the main quality. Even so while I any one need the often is so far, well enough. The prize and the quality are comparable with Load of Port with an exception of any tax of sales and has rid here in planting to direct 100 around the trip of miles to buy them. Like the sake buys for my purposes.
2 / 5 Linn
A F-150 camera of covers there has been the tapper or enough 5/8' in 9/16' while you are gone down in a width of covers. An attaches of hole of covers he of compression was also down and too big to achieve a thread of covers. It was in Autozone and has rented a compression declares. Comparing a two, a autozone the version there has been 3x a period to thread and was quite 1/8' the narrowest diameter. It was able to try with this box and was free (minus a hassle to choose it up and returning).

This can do for some carts, but the be conscious no in my F-150. I have found this quite odd because of engine with such big components never thought the spatial subject.
1 / 5 Sharron
Tried in my brothers three wheeler first only to say him has compression way down below, in my cart of golf only to reconstruct cause of engine of low compression, in my truck for the soiled misdiagnosis on all used it on ! Coming to discover this stupid thing reads bad down all a time!! In evening for repayment... That is to say that the hat will take for 22 some odd dollars!
4 / 5 Loyce
Havent Tried it still why has decided them exit of the mine mini hobby of bicycle n beginning simething more, as he so only seating around. It looks good quality but havent tried it still
4 / 5 Gordon
Some annexes are good to take to the plot of today of bays of the tightest engine and holes of discharges he tighter. The works add.
4 / 5 Elijah
Awesome, Or there is wanted always one of these things in my cochera.
4 / 5 Irene
The element arrived when fiancé. It was able to teach my students as to use a tool with ease. Very of confidence.
5 / 5 Ilene
The results of compression have compared on 3 chainsaws against the compression “of the sweats” of good mark declare, and this unit has failed miserably. My bomb of saws in 150, 165, and 205psi in some known a lot declare, which matches up with figures of known factory partorisca a respective model chainsaws in shape well. C declares was of a mark for enough bit it. While you know that it is not an attentive representation of PSI, is usable I supposition.
Like an example, my Dolmar 7900 bombs 165psi. C declares pointed invernadero to grieve run yes at all in this low of the compression. The piston and the cylinder are the form adds so it has had one invernadero averts.
5 / 5 Phyliss
All need tries compression with several sized adapters and connectors, all organised in the convenient plastic chance.
A metre is the simple dial with the needle that aim to an apparently random number like this purportedly measures compression. A result is the compression that reads that it is grossly inaccurate and absolutely useless. But a chance is well.
5 / 5 Doria
No shabby... No law corrected. Around shipping to return. No shabby.
5 / 5 Bree
I work in the tent and there is still to find the engine can use them this in. A tone of edge is different that anything iv never seen and yes is a hose is too big to go in a hole of sparking plug. Also you want to take different annexes and so only use a gauge his impossible because it uses the different that returns that another tool.
4 / 5 Jules
Declare The box is which has required, well enough for an use has limited will give it. The looks of boxes to be complete and adapt to several measures of sparking plug. It comes from the Chinese ATV 150cc engine.
4 / 5 Marilu
This law roughly 95 psi for both cylinders. A compression gauge has trusted law roughly 150 psi for a same motorcycle.

Is trying Finds that the cylinder has low compression, this gauge will do. But a numerical psi is useless. I have had to return this.
4 / 5 Robbie
Of the one who Buy this needs PSI accuracy. A unit I recived registered consistantly 20 PSI lower that it was real. I have tried this guage against two another compression of costruttrici different that tries guages to verify a innacurate readings.
5 / 5 Ione
Has not had adapter the apt spark-hole of discharges for edges to cover widespread-could not achieve edges in boss.
5 / 5 Rosemarie
Does not look to do at the beginning uses a legislation of test of the compression in a box so only could take 60 pounds of the same compression snowmobile with the compression of O'Reilly declares has had the hundred and twenty pounds for any reason have looked for to use the much more the times and he have begun dulcemente law I correctly believes now is quite attentive
5 / 5 Odessa
Tried in my brothers three wheeler first only to say there is compression a lot down, in my golf cart so only to reconstruct cause of engine of low compression, in my truck for the gross misdiagnosis on all used it on ! Coming to discover this stupid thing bad law down all a time!! You take it for repayment... Ossia That the hat will take for 22 some odd dollars!
5 / 5 Boyce
If it can give accident of zeros . Bought this in July. Not to use it until well in October partorisca do control routine in the snowmobile partorisca a upcoming winter. You think it that it was the box has ordered at the beginning. A lot unaccurate reading economic and no durable. The inner glass has broken some uses of him. It can not return he because of period of turn. It is now feed for some rubbishes now. The waste of money spend more on something concealed will last.
5 / 5 Lemuel
I desire that a fight was the little tighter. Calm to good sure need 2 people to try.
5 / 5 Hae
Law, but the chance any a quality of adapters or gauge the main quality. This in spite of as I do not require him often is like this far, well enough. The prize and the quality is comparable with Load of Port with an exception of any tax of sales and there is rid here in planting to drive 100 round of travesía of miles to buy them. Like this very spent for my purposes.
5 / 5 Jerlene
A F-150 chamber of the sparking plug there has been the tapper or roughly 5/8' to 9/16' as six gone down to a width of sparking plug. An attaches of hole of the sparking plug of compression was too much short and too fat to achieve a sparking plug threading. I have been the Autozone and has rented a compression declares. Comparing a two, a autozone the version there has been 3x a period of threading and was roughly 1/8' the narrowest diameter. It was able to try with this box and was free (minus a hassle of the choose up and returning).

This can do for some cars, but be conscious no in mine F-150. I have found this quite odd because of engine with such big components have not thought never would have the subject spatial.
4 / 5 Marcelino
Has purchased this to try my compression of cylinder of the daughters and I have taken erratic numbers. I have taken loaned the fellow east and tried and has compared results. Big difference among gauges. Fact a lot on pressure to feed so only any compression.
5 / 5 Carlita
Has used this several times in mine big disturb mk7 gti. They are not 100 a one accuracy of a gauge. But I show 174-176 by means of all the cylinders. My main worry is consistency , and ossia like this does. I produce it adds
4 / 5 Jayson
the mine Snaps In the box has been flown. @It gives used That perhaps three times for the year could not see that it pays that a lot partorisca like this of small use. This box has taken my eye.
Ordered it, used it interior 30 minutes to take he out of a box. The fact adds, the looks adds, probably all a Snaps there is on does paralizaciones less than means a prize.
5 / 5 Cristine
Total . I have bought this to try a compression in rucksack of mine blower which have thought has required the upper end reconstructs because it tries in 50 PSI. Coming to discover a gauge so only will locate to 50 PSI any one @subjects that has bought the quality an and now tries in 140 PSI. More economic is not NEVER BETTER!! Spend of the extra money and take the quality a
5 / 5 Dulce
has bought this without looking in of the descriptions. I am spent $300 in those substitutes the upper end for mine ATV... You think there it is it so only be 50psi compression... It have to that it has known it... Entirely I reconstruct upper final... And it was 50psi still!!!! 🤬
5 / 5 Layne
It has done a work easily in mine 54' jeep. They are not the mechanic but this box have done the control of easy wet compression and attentive. Highly recommend, the value adds.
5 / 5 Nilda
Is awesome! It looks partorisca be good. I do not have the cup of a line gauge partorisca compare he with this in spite of.
4 / 5 Rhoda
A box partorisca try read with accuracy. I used it several times and he consistently does like this described! I add compraventa!
4 / 5 Asia
I have not used this produces still but is the very complete looking unit partorisca of the money..
4 / 5 Dorethea
Fast and attentive nave. Good quality partorisca a prize. Had the piece of metal has had to that file down in some edges but the law adds still.
5 / 5 Trina
The hose has blown of a quickly connect in a prime minister cyl tried it on and believe me has dipped the plot to try to try to do is now a box is useless.. I am not sure like this to return a box as I have not received any documentation with him. You appreciate the response of Amazon or a manufacture..
4 / 5 Alena
Horrible do not attack at all like this crazy rasgó down the whole engine that did not require it reason if this junk and has used some times and I can do not taking for behind the east is rubbishes
5 / 5 Evelynn
has Used this compression declares to verify for soufflé headgasket in the 2007 Toyota Camry. Expósito That has had two cylinders with zero compression. Although so only you suspect one. Easy to use and easy to read. Among handy in a future to the equal that has the little more transport that need.
5 / 5 Nanette
Prefers to use a hose and of the annexes for screwing to hole of sparking plug
the hose of precise box longer that achieve hard to achieve holes when a hard root is worthless. But it looks to do well otherwise

Top Customer Reviews: Orion Motor Tech ...

Rating: 4 out of 5 with 10 ratings
4 / 5 Lavette
Fact that is supposition partorisca do.
Has substituted the 30 old year setup has used that probably side 30 more done years.
4 / 5 Meghan
All is looked punctually Dn was there. At all kissing. It has not had an occasion to in fact the use. If it can not say a lot there still. Once I will modify.
4 / 5 Bradly
Very easy to use well has done. It compares to a name a frame of expensive plus has used. Any remorse.
5 / 5 Luz
Bought this partorisca do the control of compression in the small atv. Hooked He on and has given a atv 10 appeals or so many. 25psi Was a reading. With which have ordered a cylinder, piston,coverages etc partorisca do an upper end reconstructs. My buddy has spent his tools on and in his arsenal there is the compression declares with him. It snaps-On. Hooked He on and has taken 110 psi. Wow Little difference there. As we hooked Orion has retreated up. Sure enough 25psi. That the pos
4 / 5 Ivette
the element has not done properly... The service of client was wonderful issued the full repayment
5 / 5 Theo
I have had already the compression declares but has been missing adapters partorisca verify a compression in mine mini cooper. This neighbour was less than 2 of some adapters in a truck of tool. It looks and it is built also like my snap in declaring. Calm will not go wrong with this compraventa.
4 / 5 Aisha
Using this partorisca verify compression in the motorcycle. Quite handy and easy to maintain organised. This unit will not see the daily use or anything close to this but looks to be well for my purpose. A lot for a prize.
4 / 5 Jamison
So only rid and opened to find has not done so only a chance looked he has had state used and slid around in surfaces' snap the zone of the looks of hinge has been opened and has closed a lot the time and a plastic box have odorato like this more cleaned of parts... glielo Resembles has been used......
4 / 5 Lorena
Good quality for economic prize. Nizza Durable wife also.
4 / 5 Dacia
That is supposition to do .
Has substituted the 30 old year setup has used that probably side 30 more done years.

Top Customer Reviews: INNOVA 3612 ...

Rating: 3 out of 5 with 59 ratings
2 / 5
I use this in 3 different carts now. State using this to try of the compression has used vehicles before I buy the to do sure is in the sake that order of works. It IS to take to say if the cylinder is in his road was if he isnt in a phase to aim signs still. This will say you immediately need to the walk was or is enough to have some expensive reparations.

The laws add and quite accurate of the this can say.

Comes with a proportionate of different fittings for type to cover different.

UPDATE 8/3/17: A gauge now records 45 psi when any one into use. The May HAS BEEN fallen or abused and begun to do this when tried to use he for a first time the few months. In addition to an injustice of gauge to be, he also the leaks air quite profusely giving dud readings in cylinders. It uses the unit of friends to compare is, and is the subjects was, so much in initial reading, with the 45 psi adjustment, as well as lining pressure. The law adds in fist but has not lasted. I guess it it require to go with the most expensive unit.
1 / 5
A needle has been installed by behind a pin, was near waste to cheap saw so that the does not have any compression... It buys the better product, this cheap sense in all the case and probably would not last several uses
1 / 5
Used two times. Done a first time. Identified the bad point in an of my cylinders. squirt Some oil in a cylinder to do sure has not been some valves and tried to do the test of wet compression but a core of the era of valve has broken. Substituted the. The leak found in hose. Junk.
1 / 5
Bought this to try chainsaws. An adapter is far too very time and paste a piston. Also doesnt seal very enough to try compression.
1 / 5
It can not try compression in hayabusa
Injustice fittings
Suzuki is mark of main current...
There is not returning
3 / 5
I have bought this perticulary to do the test in my Stihl FS-90 and for this reason and routed retreats so and dident give and has required the 10mm returning for one covers
the necessity for east is a Innova 3614 which owe adapter'
I a lot of people of the desire would not comment in the product and what is able of without knowing sure.
1 / 5
Quality very poor compared in in element of tent (same model). Probably the cheap swipe was.
1 / 5
I have bought to do in my skis of jet - tried in a premier skiing has crossed then a prjimo an and no - really??
1 / 5
Perhaps only it take it the bad a, but this gauge read 150 psi when a compression of cylinder was in fact 190. I have tried this against the acquaintance very gauge. That of some 5 descriptions of the star has confirmed in fact that a gauge was accurate? Without doing so that it can any never trust a gauge. Has thinks that that this there has been the engine of junk trusting only this gauge. It classifies it shows that the descriptions are usually useless. I generally only look in or a star to take the better picture of a product.
1 / 5
A needle has been installed in a wrong side of a pin of decree. I have tried to use the anyways expecting it would fix , but any luck. Really I need this tool ASAP. It opens I Am in the loss.
4 / 5
I have used this on 3 different cars now. I have been using this partorisca try of the compression has has used vehicles before I buy him partorisca do sure is in good working mandate. It is hard to say if the cylinder is in his way was if he isnt in a phase partorisca aim signs still. This will say you immediately if the precise walk was or is roughly partorisca have some expensive reparations.

The law adds and quite attentive that I can say.

Comes with a resupplied of different fittings for types to cover different.

UPDATE 8/3/17: A gauge now registers 45 psi when any into use. It is not never state fallen or abused and has begun to do this when I have looked for to use he for a first time the few months. It outrage a gauge injustice to be, he also the leaks air quite profusely giving dud readings in cylinders. It uses the unit of friends to compare to this, and is the way was, both in initial reading, with the 45 psi adjustment, as well as that resists pressure. The work adds in fist but is not lasted. I guess I will require to go with the most expensive unit.
5 / 5
A needle has been installed for behind a pin, was near the scrapping to economic invernadero because there is not any compression... Buy the better product, this felt economic in all the chance and probably no last a lot of use
4 / 5
has Bought this to try chainsaws. An adapter is too long and paste a piston. Also doesnt seal a lot enough to try compression.
4 / 5
Has used two times. Done a first time. Identified the bad coverage in an of my cylinders. squirt Some oil on a cylinder to do sure has not been some valves and tried to do the test of wet compression but a core of valve was has broken. Substituted the. Leak expósita in hose. Junk.
5 / 5
Could not try compression in hayabusa
Injustice fittings
Suzuki is mark of main current...
There is not returning
4 / 5
has bought this perticulary to do the test in mine Stihl FS-90 and for this reason sent it to them behind like this the dident @give has required them the 10mm returning for a sparking plug
the precise partorisca east is one Innova 3614 that owes adapter'
I really people of the desire would not comment in the product and that it is able of without knowing sure.
4 / 5
Has bought to do in my skis of jets - I tried in a first ski has spent then of a prójimo an and no - really??
4 / 5
Quality very poor has compared to in element of tent (same model). Probably the economic swipe was.
5 / 5
Perhaps so only has taken the bad a, but this gauge read 150 psi when a compression of cylinder was in fact 190. I have tried this against the known a lot of gauge. That of some 5 descriptions of star have confirmed in fact that a gauge was attentive? Without doing like this like this can calms does not trust never in a gauge. Has thinks that has had the junk the engine that trusts so only this gauge. It classifies it shows that the descriptions are usually useless. I generally only look in some of the accidents to take the better picture of a product.
4 / 5
A needle has been installed in a wrong side of a pin of stop. I have looked for to use the anyways expecting it would fix , but any regime. It was really requiring this tool ASAP. Now they are in the loss.
4 / 5
Junk. Take the mark partorisca appoint well one. This a dead person after verifying a cylinder. You do not surpass 30 psi reading now. Now I have several hours partorisca pursue the subjects of the low compression have squandered tried that once in a good cylinder. JUNK JUNK JUNK. It AVERTS To all the cost. The vendors would not owe that remain to sell 'Look equally' crap concealed would owe that do consistently like the normal product but no.
4 / 5
Have an old Volvo that has developed recently the misfire in cylinders 2 and 3. In fact, some cylinders have not shot at all. Of then some two cylinders are right next to the each one which as another (and some other cylinders have shot a lot) has suspected strongly the boss has failed gasket was a cause. I have not wanted to pay to have a car towed to a tent and then has verified was to confirm my diagnostic, this in spite of. A bill of tow and a checkout the cost would have been in some hundreds of dollars and that still would not have covered towing an automobile of rear house again if I have not paid one $ 800+ for the take fixed.

In all the chance, has has wanted to one of these for the moment and a need is arisen finally I so that it has taken the casualidad. In 15 minutes this device has confirmed that has suspected. We find strong compression in cylinders 1 and 4 and virtually any compression in cylinders 2 and 3. So much, sure it looks the boss blown gasket. Like this minimum some needs of boss to exit and be verified with the legislation-bordos to do sure is not warped. There is always a casualidad external of coverages of the piston failed but ossia the a lot scarce occurrence in of the modern cars.

So many, inferior line, partorisca around $ 30 now have an excellent idea that is bad with a car. We know it is the subject of compression and any to do with ignition or delivery of fuel. Although this gauge pauses some next time goes for the use paid it already for him. Client very happy!

MODIFICATION: pulled a boss and sure enough a boss gasket has been gone among cylinders 2 and 3. This be has said, at least 2 people have left informative commentaries down which would have to that be read and has considered.
5 / 5
Can give this POS the negative indication I .. Another example of Chinese junk has sold to the American buyers have trusted. I have ordered two of these and both were defective, both have been returned, both were useless reasons neither one of some metres would connect with a hose that screwed to a hole of sparking plug. It looks a machining in both has been taken my money behind.. Never again I can that to him help.
5 / 5
Swimming inherently injustice with a product. This in spite of, When I have received this declares, any one gathered it dipped a needle in a wrong side of a stop. I have had to that open he until remedying a question and now does like this has to that.
5 / 5
Like this far like this well for small engines... I am using he partorisca chainsaw testing. An advantage to the east INNOVA the unit is that a schrader the valve is in an end of a tubing where he edges to a hole of sparking plug. You want that valve like prójimo to a cylinder like possible to take attentive readings. I have used this declares in numerous chainsaws with/without the scored pistons and is doing well.

Versus One uploads of port 8 box of piece 62638 (to possibly save some people some endeavour & of time):
has bought initially one uploads of port 8 box of piece 62638 and is returned... This is resulted to be the piece of junk. In the first place I give readings in a 60-65 psi row in known a lot of chainsaws like him 372xp this uses all a time (read 155psi with one INNOVA versus 60 psi with a HF 62638). A chainsaw generally a lot included begin until takings a lot on 100psi according to costruttore. One INNOVA read the plus believable 150-170 psi in mine chainsaws ossia perfectly operational and 115psi in the 390xp with the slightly scored piston/cylinder. Another subject with one uploads of port is that one of some connections is falls averts after 2 days of use.
5 / 5
He Do laws of engine a lot small neither for profit or so only the tune on on possesses material the control of compression can save you the plot to time troubleshooting subject to begin. Easy to use and will know where is with an engine immediately.
5 / 5
Looks to do so only well, has had the 20 old years declare this was of confidence until it take the tumble of the house of engine. C declares looks to do like this as well as old one has done. Often it does not like quickly disconnects test of tools but a disconnect looks sturdy enough,and a fittings is interchangeable with a hose and fittings of my past declares. A lot down $ 50 comp testers has a piece crimps finals,or measures of dark edge that prevents to extend them or substituting hoses,but this unit is has better thought was. It is Innovas is the value of descent
4 / 5
This compression declares the good works and is easy to read. And has the valve of emission of the pressure that is as well as you can release a pressure without unscrewing of a cylindar boss. This also has the gauge on he thatll say you if a comression is acceptable or if precise work. Of course would owe that verify you with your engine specs to see exactly that compression your engine would owe that have but so that the fast reference so only to give you an idea if an engine is same value messing with, a red/green gauge in the compression is sum . I have bought this for working in of the small engines to the equal that to locate mower and the work adds. An only thing that the to of to the that likes is that of him didnt coming with any type of chance to dip he in. This isnt something those the majority of people will use every day and was a lot is them coming with some type of chance so that the doesnt taking has broken rattling in a toolbox. But it is them so only be in here and has bought quell'cushioned handgun the chance and this have done utmost to store he in.
4 / 5
Ive Used it so only once like this far in the chainsaw but work. Tip the low reading, saying me my coverage has been stuck. I have substituted a coverage adn tried a compression again and read main likes has to that. I add for occasional use. Adivinos If you are the pro and slowly on using this calm often would want to one of better quality, but for a half homeowner would be necessary to be it well.
5 / 5
It has been expecting the tool that would be GOOD to use the little time and he then would finalise in some rubbishes, but was pleasantly surprised by a quality of this declare. A hose of looks of hule partorisca be of quality a lot well, a fittings is a lot of fact and connect securely and closely. A gauge looks partorisca be very attentive. I am pleased particularly with a way a hose of hule reacts partorisca rid entrance partorisca drive a tip to a sparkplug hole. 5 stars.
4 / 5
Ossia A second compression declares has purchased. A prime minister (any one this mark) has touched partorisca likes it has had marbles going around interiors. Amazon refunded An element and I have been with this mark based in indications. Easy to use, has the telltale characteristic in that resists a box partorisca read main emission a pressure with a key. He the fact the easiest plot when doing test of compression for calm. It buys it again.
4 / 5
Would not think it would do a lot of difference in a world-wide that compression guage use in any engine. I have had the real hard time that finds an attentive a concealed done with small engines ( tried 3 other frames). Another gauges so only read 50-70 psi until I have bought this gauge. The excellent works highly recommend it.
I partorisca die the 5 stars yes avenges with the chance.
4 / 5
A misfire my cost $ 1000 in a dealership, if any one the some right tools.
Verified with Fines-Amazon partorisca Scan of the System, and expósito misfire in cylinder 4.
Has verified a compression, with INNOVA 3612 Compression Declares, was Or.K. Any boss of cylinder gasket question.
Has verified a Spark. Any spark. Has has substituted sparking plugs any spark. Verified a spark among a band of coil and earth. Any Spark in Cylinder 4.
Based in a diagnostic, has substituted some sparking plugs, bosses of sparking plug and a band of coil. The question has Solved.
4 / 5
This compression declares is at all elegant, but work so only well. I have verified compression with him and another dollar another big plus declares for comparison and his both read on some same. So many, would say to touch the quite good shot for a prize.
4 / 5
Compression quite solid declares. The only complaint is does not have the chance for storage. This is not something loves tossed around in the toolbox and that no. looks attentive and was one of an economic plus still compression of confidence testers there.
5 / 5
Good lovely box. There is not one 10 MM connector has required, but there is no known required it has ordered at the same time a box. There is to 3614 box for the little more concealed comprises it. Calm will require was doing in bicycles of muck.
5 / 5
Has used a gauge to try a compression in my car of mammas. I have been concerned was bad because of an age and some symptoms has taken them of an engine. One transports to go them súper rough. This in spite of was blown entirely has been to find all the cylinders in 120-122 psi And the able era to govern out of bad compression!

Has used an adapter of deep hole for a test. I will say this in spite of that was them dissapointed to find one or-coverage among an adapter and a connector of prime minister in a hose the little broken after a first use. It is due to an inner lip in an adapter. As you could invest in or-coverages or modify a fittings. If you can win this defect im the sure law adds; then again it can them have has presionado the on.

A product arrived in the clear disposable plastic headline. So utilisations a thick tool or the travesía with him can consider take some class of chance for him. All the things have considered, if precise the economic gauge to try compression this a work adds!
4 / 5
The work adds on 5 of my cylinders, on cylinder 6 begins to lose pressure of air, and has given the way low reading, which have known was bad ! As I have Taken it it has loaned friends to complete, which was attentive, and a cylinder has aimed well!
Has taken the casualidad, beacuse the PLOT of descriptions has said a same thing ;-(( appearances take lucky and at least complete it on a car, but No. :_(
5 / 5
has used this to try compression in mine Mustang and was able to see have compression a lot down on 2 and 3 like this helped to diagnose that it is going in with my engine(hopefully his a headgasket). A declare is easy to use and read. The the few tests on cylinder 1 again and again to see yes has taken any difference and the reading and aimed a same number every time he like this the compatible look.
4 / 5
Yesterday I hooked this gauge until Yamaha and has taken 115psi of all 3 cylinders, has done well, value a $ $
has rented 2 of Or esillys that gave readings of 60psi in mine 96' Yamaha F70 outboard engine, which have known was bad. My engine has produced 115psi of the test I last year (2016).
Like this because of this bad gauges, has decided so only to buy one, of this one was economic.
Says, this is not the heavy duty gauge, but is well to try the few engines the year, but probably the pause has used on.
4 / 5
Has used this in mine outboard and the focus on adds. I have run by means of a test the little time and some numbers that goes back is quite compatible. It was able to quickly enciphers out of that was in fact bad with an engine after knows it has not been the question of compression. The tool adds to have for the prize adds.
4 / 5
That is supposition to do exactly for economic. Discovered my outboard engine this is been crapping out of the fact has the compression adds like this now knows is something more ossia more abordable to service like carburetor.
4 / 5
Has purchased one innova 3612 compression declares in 2014 and a more straight valve fracasada in 2020. Ossia For use of house and is exited adds. He no a quality of mine snap on I use in work but one Innova taken a work done. When A more straight valve has failed was the simple substitution and has had felizmente one in mine toolbox.
5 / 5
Has use he with my KLX110L but has taken also an adapter reason an inaugural is different that one some have resupplied... Mark sure returns your bicycle,car or anything.
Are happy with him. It is easy to use and easy to read... Any one sure roughly accuracy because I do not have against tried anything more... But I guess his quite GOOD... Read that have expected in my almost new bicycle.
:)
4 / 5
Always wanted to and or has required the compression declares on some years, but has not bought never one. On until recently a cost was so only too big to justify for an occasional user. This in spite of thanks to our neighbours by means of a Pacific, now can choose an up for a prize of the pair Frappachinos.

Imagines has done the living doing in of the engines of inner combustion, could give sustain the little ridicule of coworkers you whipped out of this little bad boy. But to help the adolescent-ager take an old heap on and that careers. This will do so only well.
4 / 5
Laws perfectly, the adapters return more vehicles. In this prize, an use and these paid of tool for him. Outside to be the specialist the one who would use the compression declares almost daily, has any reason to spend 8 to 10 times a prize for some frames of big name when you can take is one. More, can buy other adapters for him. Shopping again.
4 / 5
There is no @to @give the one who easy would be it to use this. Bombs until a max psi and stays there, enough the good tool. I think that that some extensions could have been a lot if he something another the chainsaws.

Has tried in the well has seen in 160 psi and the blown invernadero in 85, as it looks to do a trick!
5 / 5
Has has had subjects of zeros with this declare. Before I used it even I have dipped the little tephlon tape around some coverages so only to ensure has taken the pertinent reading. He screwed in amiably to a boss of mine Yamaha blaster and the compression resisted and has not looked to fall any one. Free when calm the questions to. Any complaint in this element he his does.
4 / 5
Declare Laws well. Some the multiple adapters connects and disconnect easier that has expected. The valve of emission 100.

I slit a side of a container and servants like the box of good storage. Two 1/4'x1.5' slivers Of the tape is all apresamiento for the hang (in container) of the nail in a ol' wall of tool.

Mina the only remorse is not buying this declare more collected. It have not spent so the time that blame my poor carburetor when has 40-70PSI. ( It have to that be in 185 +/-21.) Buying declares it the insurances beaten that it pay the mechanic to diagnose subjects!
5 / 5
Extremely happy with cost of mine. It was quickly able to try compression in my mamma Pajero with the v6 engine. The compression of engine would owe that be anywhere of 120 upwards..
Has @to @give has not taken compression on everything of 3 cylinders and the compression was down in another 3. If it was not partorisca this tool, has to them that pay the plot of money partorisca take the test of the compression done. Very happy with a compraventa
4 / 5
has a 12mm adapter that need partorisca my V6 engine. I used it so only once like this far, cranked an engine 5 revolutions partorisca each cylinder partorisca obtain my readings. Lower 195 psi and elder 205 psi. Happy that some results are inner 10 variac.. I have not tried a lot another gauges, as it can not comment in his accuracy.
5 / 5
Does well. Used the in my jeep with 160k the miles in an original exhaust system. It has been it can I am missing and while all the world has said has required them to change my conversor catalytic this gauge aimed concealed has not been a question (zero rear pressure).. Finalised when being some injectors of original fuel that has required to change.. This $ 22 gauge saved to spend in $ 300 in the new exhausts system the has not required.
5 / 5
Had taken loaned the Load of Port declare of the hover and my again reconstructed engine have tried consistently down like this has suspected them a declare. I have taken loaned another of the tent of supply of the local car and the engine have tried well. While it have ordered it is one , row with a one of a local tent and has done well.
5 / 5
Am not sure the one who attack this Compression Declares is but some numbers are a lot of repeatable. Ossia One the majority of attribute of entity . I have tried some cylinders on 2 of our vehicles and has taken the very good indication of a condition of engine. Some numbers look very like this certainly quite attentive for me. Highly recommend this declares.
5 / 5
In general, would recommend it. This in spite of, when it takes he of a cylinder, an adapter has taken stuck in an engine. Has has had to that the undermine was. Basically, an adapter unscrews of a declare before he fulmine of a cylinder.

Could have been the ache, but still recommend it reason take a work done and some instructions were a lot.
5 / 5
Simple little extracted. The works well has 4 possible sparking plug adapters. Although one of them is a same diameter and the edge so only longer. The tool of diagnostic adds for just verifying real quickly that healthy an engine is. For 20 bucks you cant beat it. A packaging was terrible, so only the shell of packaging of economic plastic anxiety to write that is class of the bear to open up and essentially some times use so only. But hey, launches this in the stock exchange of tool and maintain clue of yours adapters and he would have to that be well, his all edge together with an adapter of small diameter in an end, so only leave them like that until your loan for the use.
4 / 5
Was in a phase for the ski of Jet has used, these handy devices save me! I have found the ski of jet in Craigslist, looked adds, has negotiated the contingent of just prize to the test of compression and listening it run. The ski of jet has begun, has not touched adds but has run. Tried some cylinders, 2 was down in the compression and one was compression. I walked it it was. Well with one $ ! Easy test to treat concealed calm say you stirs it.
4 / 5
Can not believe all some good descriptions. This thing is quite malicious that good use. I have measured the engine of motorcycle of the bicycle that has bought. C declares has taken 120 psi. I asked that it is wrong and has thought roughly that substitutes a bicycle or engine. I have trusted felizmente in gut of mine after the week and has bought the different to declare. A bicycle is well and taking 150 psi. Waste of time.
4 / 5
Has has used so only a declare once, in the small, two yard of has shot the active interview engine. I can say that it was easy to use and looks attentive. I assume it extracted well in of the main applications. Having at all to use for comparison, so only can do a supposition that considers accuracy.

Top Customer Reviews: OTC 4748 Belt ...

Rating: 4 out of 5 with 49 ratings
2 / 5 Nicholle
Be it has advised that there is tension graduated any stairs in this gauge; only or lines for 10 pounds. I can have read that one 10-calm the books are a parameter regulates for Davidson motorcycles of Harley, but yes wants to use he for a lot of anything more a precision simply will not be there, so that you will be guesstimating a reading.
5 / 5 Erminia
He life the easiest plot and not guessing work while I have done for in 20 years, would have to has taken or the mark of long time. I have verified my parameter of supposition and was the subjects was. You favour and purchase this tool, can not go bad, probably helps to extend your life of tape. It take, it does not use any dress of the tape or he reduce his lifecycle.
3 / 5 Wilber
Some laws of the better inch. A lot they have mark these only for use in of the motorcycles... It can probably some mathematicians and the figure was (perhaps) quite what a pertinent declination is in 10lb, but for this point a lot would have to only when being 'ratcheting low tapes until they are 'goodntight' with a ol' inch'
4 / 5 Delpha
A quite mere tool and earnest. For Harley proprietary, that is to say a method has agreed to verifies tension of tape of the walk. It poses one Or clean in 10 lb mark, presses a tape up and measure a declination.
4 / 5 Jackson
Fact well in mine 2008 yamaha raider. It IS the small also width to take in a guard of tape as have had to was a side of a 'East . But of these rays of the part in any one has preoccupy quite breaking a gauge during a modification.
4 / 5 Fermin
He what the chairs have feigned by,,,a tool that is not used very often but when there is 5 Harleys in a familiar necessity unit
5 / 5 Layne
The fact adds to measure tension of tape in my harley. The averages a prize of Harley a
5 / 5 Nilda
Work well in my Yamaha stars of road. It does not guess to take one of these.
5 / 5 Rhoda
I have to modify this tool with a grinder of angle to do apt interior a shrouds. But to be fair, a HD the tool is a same road . In all the case, the tool adds
5 / 5 Genoveva
These laws add in 01 Harley Issues the records of king of Wide walk.
5 / 5 Caroyln
Be advised that has tension diplomada any stairs in this gauge; so only a stain partorisca 10 pounds. I can have read that one 10-calm the books is a setting rule partorisca Harley Davidson motorcycles, but yes wants to use he partorisca a lot anything more an accuracy simply will not be there, reason will be guesstimating a reading.
5 / 5 Yasmine
A better thumb. Really they owe that it marks these so only for use in of the motorcycles... It can probably roughly mathematical and the figure was (perhaps) roughly the one who a pertinent deflection is in 10lb, but thus point really would owe that be so only 'ratcheting tapes down until they are 'goodntight' with a ol' thumb'
5 / 5 Sadie
has had to that laugh when the seen the automotive YT'r search to use this the tension Automotive timing tapes, and has had to that some stupid mathematics for the imagine was, not being any one follows this was Harley Davidson concrete tool.

This tool is stupid easy to use, but 2 need of things to be mentioned, to potentials DIY buyers.
1.) If your HD does not have a guard of tape with a window of stairs of the tension, will require the ruler, or the measure of tape to determine a pertinent tape deflection for your bicycle.
2.) It takes a pertinent tape deflection spec of the manual of service, or included contact trafficante local yours for a spec, DOES not GUESS , can break a tape, main iron bearings, and included your primary Interior to dip a tension to tight, or too free.

My only complaint the OTC would be, some first uses of pair, there is the hitch in a mechanism where the wouldnt start to compress until it take a lot near of a 10lb mark, reason once liberta on almost jump to a 10lb mark.
4 / 5 Jaymie
There is always has trusted so only in seat of mine when verifying tape deflection, but has thought would give this tool tries it based in low cost and positive critic. It looks to do well, this in spite of have not verified accuracy still. Interesting that the results that use this tool was quite one same as when I have used my toe to press a tape on and that use as it has thought was roughly 10lbs. All one same, will use this tool that goes forward of then has in my box of tool, and will be to follow a procedure like clear-cut in a manual of service.
5 / 5 Trish
Does life the easiest plot & not guessing work as I have done for on 20 years, would have to has taken a the fact of long time. I have verified my setting of supposition & was way was. Calm the favour & buys this tool, calm can not go bad, probably helps to extend your life of tape. It agrees, it does not use any dressing of tape or he decrease his cycle of life.
5 / 5 Agueda
He the one who his feigned partorisca,,,a tool concealed is not used a lot often but when there is 5 Harleys in a precise family a.
4 / 5 Page
Has has not annoyed never use one of these when remounting the rear wheel, but would have to that it has been. A tool is quite economic that has not felt the 'wing he' to approximate a measure that this tool any with accuracy. Almost I will not use it never, but when then I will be happy I has it.
5 / 5 Donnell
Has taken this to regulate a tape of walk partorisca Harley Davidson Cane at night. This tool is very built, simple, work perfectly well and to the equal that has drawn. For a prize, the calm only tin has beaten. A OEM HD the tool is way pricier and in my opinion, exactly a same thing. I have it quell'has used so only a tool once I so that pode a lot of vouch for his longevity, but that sees that it is the very simple and basic tool , unless you are by train for the abuse, does not see reason he wont last you a lot of years.
4 / 5 Lavone
The tool adds for tensioning a tape in mine 2009 Superglide. Used he together with the tool of alignment of the wheel that the also bought on Amazon. The fact adds.
5 / 5 Dannette
Reason spend upper dollar in a same element with a HD on that. Quite small to spend in your stock exchange of tool.
5 / 5 Maribel
Works well, some access of tapes can be difficult but can still tension of measure.
4 / 5 Thanh
Very partorisca have in an old toolbox. And because you take rasgado is gone in Harley stealership, takes this and properly tension your tape so as to not having the question to further go to a stealership and take rasgado was.
4 / 5 Donte
Partorisca a prize ossia a perfect tool partorisca take your good tape
5 / 5 Clora
This work adds in 01 Harley Issues tape of King of Wide walk.
4 / 5 Debbra
A quite simple and sincere tool. For Harley proprietary, ossia a method agreed to to verify tension of tape of the walk. It dips one Or coverage in a 10 lb mark, push a tape on and measure a deflection.
4 / 5 Fidelia
Has the pair Harley is - and has lost my last tape tensioning gauge (in fact thinks that was 'taken loaned' and never returned) in all the chance this one looks better, and the law adds.
4 / 5 Horacio
The tool adds to have if you are new to do in your bicycle. With which awhile tho will be able to judge a tension of tape without him.
5 / 5 Edna
I have had to that modify this tool with a grinder of corner for the interior returned a shrouds. But to be just, a HD the tool is a same way . In all the chance, the tool adds
5 / 5 King
has had to that cut some sides of some upper reasons does not return inside my guard of tape. Perhaps it is flr Harley this older and there is not remarked. Quickly fix any way
4 / 5 Julieann
has Done adds to measure tension of tape in mine harley. The averages a prize of a one of Harley
5 / 5 Jim
Economic simple and easy to use. Helped me tension my tape when that substitutes my wheel of motorcycle.
4 / 5 Stefanie
Has done well in mine 2008 yamaha raider. It was the little too wide to take to a guard of tape to the equal that have had to that grind was a side of a 'East . But of these rays to separate on has does not have to that me worry roughly breaking a gauge during a modification.
4 / 5 Nadia
Does to dip tension of tape in Harley the piece of cake.
4 / 5 Miriam
Paz economic of alcohol. It is probably a part esatta same like any name some, probably would not pay extra for OTC was to buy again.
5 / 5 Shaunna
Has done as it has expected. It has taken some starts of supposition of an old fashionable way.
4 / 5 Rickie
Easy to use and less spends that Harley Davidson frames.
5 / 5 Claudio
It is quite easy to use the sister for cold in the resistant against a tape with a delivery and pressing with another hand but work
5 / 5 Gladys
does not return in mine Slips callejeras, will have to grind was one of some sides to do the work thinks.
4 / 5 Georgeann
Works like the charm. Used he more than a swipe. A thing the note is hule graumets will dry was and pause but calm of the that requires them
4 / 5 Suk
Like the headline has said, this tool is well; but, appearances for something bit it more precise and with the row to upload wider.
5 / 5 Tawana
Works to the equal that has described. It was able to take an exhaust and presionar a tape I with a gauge to determine what tension. Saved $ 175 in a mechanic.
5 / 5 Kassandra
Has not used one or bookmark of coverage. Tight access for where has required the, but the good touch.
5 / 5 Caleb
Has the piece of plastic around a tape in Harley-Davidson visiting model this does not return in there without the grinder can regulate it he like this returns
4 / 5 Lucie
Happy used it. The tapes cost alot and yes too tight will break tape
4 / 5 Julene
Very happy with this fact seat very better after dipping my wheel behind in a street slips
5 / 5 Shemeka
work, the mark partorisca regulate tape of walk with accuracy.
5 / 5 Angella
Has been rid quickly and help me maintain a tape in my motorcycle in a correct tension. The original owner of the motorcycle the tape has left partorisca take too free, as it has purchased this and taken the specification immediately.
4 / 5 Gerald
Good simple tool partorisca use and to good sure more economic the one who that upload against HD!
4 / 5 Francina
No very big. Every time the calm use wants to verify a tension with another tool.

Top Customer Reviews: LEIMO Cylinder Leak ...

Rating: 4 out of 5 with 13 ratings
5 / 5 Hyon
Utilisations this partorisca do the leak down in mine '94 Bronco . First of all, it does not register Any loss of compression in six of some eight cylinders. ANY ONE. It have to that it has registered it at least 10-15 in mine 195k motora of one thousand. So only two cylinders have registered 10 or more loss. And then when I have gone back and king-has done a test with the warm engine, an adapter that goes to some holes of sparking plug have separated. Sure, it calms that can dip behind joint but now an adapter coupling transfers and just transfers. Like any podes any edge he all a way to a hole of sparking plug anymore. It sees picture partorisca a separate adapter. I have thought roughly using adhesive or crimping it, but I quite so only return it and buy something more durable.
5 / 5 Vicky
Fast nave and exactly to the equal that has described.
4 / 5 Mariella
A quickly connect filtered a percentage gauge is remained in a place and some leaves of regulator to do on according to trying .A hose of connection wa too short and no flexible to be used
4 / 5 Jada
the tool has not been usable because of unfinished machining on at least 2 components.
10mm Adapter - the edges have not been to cut quite deep the doing the big likes any edge to hole of sparking plug.
12mm Adapter - to Unfinished slug that the fact the solid peice in an end where the hose has been supposed to edge in.
5 / 5 Kerry
A quality of the build of this box was poor. It was able of the take to do, but to good sure filters directly out of a box - has installed grieves: the audible leak that comes from/comes from one of a pre-the connections of hose have gathered. The product was obviously very tried before it was packaged up. Some edges in an adapter of sparking plug was cut also very bad and was very difficult to involve in a boss of cylinder.

Am returned this product and will spend the little more in the together for future needs.
5 / 5 Tammie
A work. Had some connectors corrected and used in my Jeep Wrangler to filter try each port.
4 / 5 Alethea
Has come punctually,the law adds has diagnosed my friends Chevy 1500 pickup and found 6 cylinder has the burned exhausts valve. I will be to substitute intake and exhaust valves in this cylinder and ship it ,so only for the take down one issues for the moment,til takes moneyfor the new
5 / 5 Ward
Ossia a first time has used the leakdown declares. I have required to value the engine of clients that has not been in a car,as it can very easily be cranked on.
4 / 5 Alva
An accuracy is inconsistant. This in spite of, calm once takes used to some different readings, calm usually can take the quite attentive idea of the like the.
5 / 5 Alfredo
The mine filtered in a fast emission that connects to a cylinder.
5 / 5 Tessa
It has BROKEN ACCORDING TO TIMING that USES it The GAUGES any BED ORIENTS it has STUCK. ACT So that it has REQUIRED That A TIME.
4 / 5 Dwana
So only did not use it .So only I have the subject with some instructions do not clear when you ask the question in a tool takes the snotty answered to the equal that have has had to that the so only imagine has gone by
5 / 5 Olene
are a TAKEN has certified the technician of world-wide class has found this test of evasion of the cylinder partorisca be the awesome addition to my census of tool.

Top Customer Reviews: Engine Compression ...

Rating: 4 out of 5 with 12 ratings
5 / 5 Murray
Very brilliant and appeal headlights. The only subject is not exactly a better access in the 97 Firebird. In this chair of installation quite 1/4 far inch outwards (in a front). They do not join with a hideaway mechanism or coverage of bumper felizmente. I will require to use whip of protective cape in a wiring very soon. In general the updates of sake in halogen. The wiring has taken some experimentation.
5 / 5 Lettie
Unit of good test. Easy to use, easy to read. Box of the pressure of the controls is fall. Only cual required in the good prize.
5 / 5 Tomeka
The Chinese craps. It reads quite 2 psi in an engine these careers. ( It have to read 75-100 psi)
5 / 5 Marianela
It researches to be of well quality... Has has not had an occasion for the use still.... It think that that it was a worse speller in a world-wide but a fella this has written a manual of the instruction beat me was!
5 / 5 Scott
All was a lot of but no sure yes is true accuracy when you come from 2 and 4 engine of shots
1 / 5 Moshe
the Chinese craps. Law roughly 2 psi in an engine that pursues. ( It have to that read 75-100 psi)
4 / 5 Renetta
uses It partorisca try the engines of generators portatil
5 / 5 Gladys
It looks partorisca be of well quality... It has not had an occasion partorisca the use was a worse speller in a world-wide but a fella this has written a manual of instruction beat was!
4 / 5 Wiley
Very brilliant and attractive headlights. The subject only is not exactly a better access in the 97 Firebird. In this chair of installation roughly 1/4 far thumb outward (to a front). They do not join with a hideaway mechanism or coverage of bumper felizmente. I will require partorisca use whip of protective boss in a wiring very soon. In general the good upgrade in halogen. The wiring has taken some experimentation.
4 / 5 Israel
Unit of good test. Easy to use, easy to read. Box of the pressure of the controls has released. So only that has required in the good prize.
4 / 5 Sue
The hose softened because of heat of engine, difficult fact to take.
5 / 5 Elinore
Easy to use the compression of engine declares. Used once and was very satisfied. Shopping another

Top Customer Reviews: WINTOOLS Compatible ...

Rating: 2 out of 5 with 11 ratings
4 / 5 Yon
A gauge this comes with this neighbour is not a better quality. I have had to that substitute a hose reason when some finals have been crimped in a hose blocks a hose. I have substituted he with the much better hose of quality and while in the substitute a plastic face of a gauge has broken. I have had to that empty all of a liquid out of a gauge to maintain he to do the disorder in a chance. Some adapters of compression are qualities quite good . One some that has used has done a work. Another that a quality of a gauge recommends this together.
1 / 5 Hermine
Adapter of hole of discharges of glow and a pressure gauge returning no near when in an engine. Compression gauge will not resist pressure, filters. Ossia For the 97 Ford F350 7.3 engine of diesel.
3 / 5 Brooks
This compression declares no unless you yours possess a control of valve of way. There is any way to resist a pressure in a gauge. There is an adapter that has required to try the Perkins engine of diesel in the MF 135 Tractor.
1 / 5 Tana
Gauge Was busted when received would not buy never again
1 / 5 Kellye
GAUGE will not RESIST the READING HAS TO THAT HAVE CLOCK of ASSISTANT WHEN TURNING ENGINE IN
4 / 5 Rigoberto
Useless. Wine without valve of control. It do not resist pressure. It looks the good box but does not act.
1 / 5 Clarine
Ossia The very economic gauge this has no shrader valve like any tolerance and the compression have read. It does not buy this tool!
1 / 5 Chere
Right out of a box a gauge does not act!!! Ossia A lot of disapointing when the act to them partorisca do.
4 / 5 Akiko
Likes a lot another disatisfied clients of this product, after struggling to take to a cramped zone of an engine and take my first discharges of glow takes 20 minutes to take a gauge to pair to one returning because of lack of room. When I have tried to try a cylinder a gauge would not resist the reading. It looks that a valve of lack of control or sticking. After reading the numerous alike descriptions have decided to annul a substitution and purchase the diffrent frames. I have had alike disapointing is resulted of this mark when I have purchased a radiator presure declares that neither resisting the reading. Complete rubbishes, spend of the money and buy the tool of quality. A frustration is not to value he.
4 / 5 Josef
does not buy this box to try an adapter this and the nozzles do not have the valve to control so much pressure during trying is not retained in guage and does not have any way to in fact of compression of test.
4 / 5 Natalya
A key of relief of the pressure filtered like the piece would not resist pressure when that runs the test of compression. Some complete waste of my time. Returned and ordered it repubtable mark.

Top Customer Reviews: AZUNO Cylinder ...

Rating: 4 out of 5 with 34 ratings
4 / 5 Mireille
Right out of a chance this declares does not act. A show of diagram that has 2 valves of air in a hose and gauge, but this box has any one. Law 0.0 PSI does not recommend this box partorisca anything.
No attentive law PSI and will not resist pressure when trying compression. Jumps of the random PSI and never some same readings. Quality very poor the produced no spent never again. This was a second declare of this mark and is junk.
4 / 5 Rosina
Entirely inaccurate has included compared to one uploads of port gauge. Thought this would be the tool of utmost economic field partorisca my subject, after all is so only the gauge and the hose. Has readings of date of 60 lbs when in fact a value was in fact 110 lbs verified with the snap in gauge as well as the cheapie of a tent of parts of the car. If you are thinking partorisca buy is, the mark sure has another gauge partorisca verify estimate.
5 / 5 Lilliam
Are 100 happy with this compression declares. Have Almost has bought one of some versions some economic plus, but am happy has been for this one instead. A quality is really orders, and there are a lot of accessories. Frankly it was not that they can produce such an excellent product for like this of small money. It liked so much, I have bought of the second a like the present for the youngster arrives-and-maquinal coming that knows.
5 / 5 Jeff
This box of the test of the compression comes a lot very instrumented with adapters for almost all the measures of edge of the sparking plug, all neatly resisted in the plastic chance with a digital declares gauge. A digital gauge the looks have built to the cost, but looks attentive this in spite of and a key of bleeding of leaves of the emission out of a pressure stored of a cylinder. Reasonable quality.
4 / 5 Kortney
The plot to research first to buy this and am a lot happy that has selected this character is the well does to declare was adds to use. Perfect fact so that it has required them partorisca!
5 / 5 Merry
A product arrived in quality of works & of compression of excellent condition the complete box and the value adds, the must has! A lot easy to well and is a lot attentive.
5 / 5 Shella
Leaks... It take it avert and tape to pipe place in the this in spite of does not resist pressure. Junk...
4 / 5 Sharla
Does not act, read 60 psi and will not resist a reading. Used another gauge to bend control before rasgué an engine averts and law 125 psi. Economic gauges is so only concealed.
4 / 5 Terrilyn
A compression declares the box is very attentive. It can give some readings with a pressure esatta. There is the width backlit LCD screen and gives a convenient clear number partorisca me partorisca read. Well of the money.
4 / 5 Rebeca
This tool is that I have required in mine together, construction of quality, and has done well in the variety of uses. Marcos of long hose partorisca treat easy. Better that has expected.
5 / 5 Frida
Leaks... It take it avert and tape partorisca pipe place in the this in spite of does not resist pressure. Junk...
4 / 5 Franchesca
Does not act, read 60 psi and will not resist a reading. Used another gauge partorisca bend control before rasgué an engine averts and law 125 psi. Economic gauges is so only concealed.
5 / 5 Dewey
That.... Disappointed. Attended expensive. Right out of a record of boxes 70 lb with which cycling an engine partorisca five times. The compression has released to try it again and does not go in 40 lb. I guess I will require partorisca return the.
5 / 5 Camellia
A compression declares the box is very attentive and has the big screen partorisca me partorisca read a data clearly. Also it offers the complete container partorisca the compression that tries in engines of essence. I add.
5 / 5 Tien
Is in the incredible accuracy and is really useful. A gauge is able to aim 50 PSI, 50.5 PSI etc and is compared very better to another gauges. There are 8 pieces and his all return well.
4 / 5 Felicidad
I really like a quality of build and an accuracy of a digital compression declares. All an edge of adapters in easily and snugly to a hole of sparking plug to the equal that can take an attentive reading. To Fact so only likes has expected them.
4 / 5 Ashely
This compression declares the box is very useful partorisca me. There is the width backlit LCD screen that big exposures , and clear numbers. When I am doing a work , can see some numbers clearly. I add partorisca me partorisca use.
5 / 5 Vilma
Has tried this unit against 2 different professional testers. The units is roughly 25 pounds was.
Is there the way of aforar this unit?
4 / 5 Rodrick
Bought it partorisca substitute an old compression declares this there has been the box was that the be be describe and a quality is excellent. I have been using this partorisca the while now this in spite of like this well like the day opened it.
5 / 5 Nannie
A compression declares work perfectly. It is a lot of fact and extracted excellently. A gauges read a pressure precisely and is easy to use. Just ray in a hose, then attach a gauge quickly, and then begin your reading.
5 / 5 Fawn
Arrives with the container adds and comes with adapters partorisca almost all the measures of edge. A box is in the value adds and law enough with accuracy. It is easy to use and leaves easy viewing out of compartments of cluttered engine.
4 / 5 Kristofer
A compression declares the box is quite useful. It is ready showed with the screen FOCUSED wide and can see some numbers clearly. Utilisation in a tent and is really utmost. There is not a lot of @@subject like this far. Happy with this compraventa.
5 / 5 Esperanza
He no at all partorisca read well, leak of entity of a control of valve or and more where
5 / 5 Devona
the valve does not resist to pressure like them cant take the reading has tried 2 of them
5 / 5 Leona
the element is terrible has been partorisca use a first time and declare no the work will not resist compression when trying...... No SHABBY.......
4 / 5 Del
Looks versatile but would not read correctly. It has had to that use my analog old plus gauge.
5 / 5 Evelyne
Ossia A awesome and convenient box!!! Calm can not beat a prize. Helped me with troubleshooting my engine.
5 / 5 Shaunta
Very attentive, easy to read dial, among chance very good. A better part are has not paid the fortune for him.
4 / 5 Amelia
A lot looking chance. It looks the good piece of crew. It does not exit of a box.
5 / 5 Jonathon
Is not even close to be attentive has gone by at least 60psi
4 / 5 Marhta
has the habit of ck comprision in mine 2007 Toyota Rav
4 / 5 Shan
has Used this once in my Jeep and he have done as it have to that.
4 / 5 Jeniffer
innacurate. Steps of long 50 psi on all the cylinders in comparison to an equivalent. Good chance, looks well, bad. The together analog is attentive partorisca less than money
5 / 5 Ethel
are 100 happy with this compression declares. Have Almost has bought one of some versions some economic plus, but am happy has been for this one instead. A quality is really orders, and there are a lot of accessories. Frankly it was not that they can produce such an excellent product for like this of small money. It liked so much, I have bought of the according to a like the present for the youngster arrives-and-maquinal coming that knows.

Top Customer Reviews: Dorman 785302 ...

Rating: 4 out of 5 with 10 ratings
5 / 5 Norberto
It says well in a box 'any for the brake lines' would have to that have to in a description. The calm more use these stops?
5 / 5 Delsie
Perfecto partorisca connect 2 pieces to line partorisca Brake
5 / 5 Wilson
So only that has required. Works well, very lovely.
4 / 5 Iliana
Has done adds, has done my work partorisca brake the breeze.
5 / 5 Melisa
has Liked him this used aon the little diffrent vehicles
4 / 5 Delbert
Has had to that modify for my use, but has known that of a start
5 / 5 Aleida
Used partorisca line of the brake but a box have said any to be used partorisca line of brake. Like this far like this good.
4 / 5 Vera
Has substituted roughly 6 ft. Line of main brake , like this far filter very easy to do with . The container says no partorisca brakes this in spite of.
5 / 5 Fabiola
Im Is disappeared one of one 3/16 compresion unions partorisca mine 93 Jeep Wrangler a box is partorisca come opened with the hole under a box
4 / 5 Rosita
This has done to run some hydraulic lines very easy. Good quality fittings.


Related YouTube Video: