Trending Household Polyurethanes, Shellac & Varnish Products

What is Household Polyurethanes, Shellac & Varnish?


Top Customer Reviews: Sunnyside ...

Rating: 4 out of 5 with 10 ratings
4 / 5
Pricing.
Has compared to some other products. You take almost two times so much for roughly $10 more. Like this more bang for your buck.

Unboxing
Has ordered 7 chevrons. 6/7 chevrons Have arrived there is sealed perfectly. One has arrived with the little has bitten to filter. But still done well.

As to Apply
I abundance seen of ways to apply this product by means of video of Youtube. I have opted for a paintbrush of big product. But I seen another product to use rollers. Any one has said included the gun to paint of the spray?

Quantity to apply
A tube the video have said the generous quantity.
And when they mean generous quantity. They mean it!!!!
Would owe that be almost beads down a wall!!!!

Comparing the generous quantity has applied.
All the world has the different idea of generous quantity. I have opted for two different options to see which has better fact
Option 1- entirely cover a wall, can not see a product anymore. (Has thinks that that this was the generous quantity .)
Resulted- no utmost. The aim has dried. A lot of scrapping to have that has weighed. And it has had to apply the second spent again once done and then even more scrapping of
option 2- and means this in one the majority of possible literal way. To SLIME that/ CAREERS down a wall.
Resulted- very better. Dried the green it dark plus. The pieces of scrapping am exited in of the main quantities with less than trying

take
has been for a scrapper option.
Was the good quantity to try
Defiantly the intense work!!!!
Does not believe an easy scrapes immediately video.
Other options I visas has been wired brushing

Coverage
A chevron has done more on 6ft quotes X 4ft wall of width

TIPS to AGREE

If he isnt slimes down a wall when applied. It applies more. And thank me more than evening!

Fast dry. It does not comprise a long tedious quantity to time apresamiento to paint on.
Or a scrapping even more long and harder that

Colours
is gone in the light green colour when applying

Resulted/ to dry
Option 1- objective dried
Option 2- has dried the green slightly darker, but still has looked wetted almost like him gel colour (the mark sure is this colour when you take)

Prepare for the week of long/ day with east. It can be fast dry. But unless has elegant crew partorisca east. It goes to be the longitude and I week of works of intense/ day that applies and take

gloves of Wear. And safety goggles.

Gloves-My wall of basement of the cimienta has not been very smooth and walk. They were bumpy. And a scrapper paste some swipes and coming to the complete stop before paste my hands without gloves a first day has not been amused.
Safety goggles- to plot of debrisfalling was as it scrapes. Maintain your sure eyes
4 / 5
has had 2 focuses on that. When the peeled a focuses of of the this is that it was down. Some needs of costruttore to contact me asap
5 / 5
AM ENAMOURED WITH THIS PRODUCT! They are by train to say you, If airily you decide to undress everything in your cookery, then @give the one who last the really is, then discover this stripper, and your arms of the graces and of the graces, has found the winner! I leave it on on it prejudices, ANY DRY UP! In a morning, so only it light drift of a puddy knife, and your fact. I promise that ossia an only thing will not buy never again. Expensive? Yep. Totally, entirely and honradamente currency he? YOU BETTER BELIEVE IT!
4 / 5
This that says that it does. This be has said there is pros and gilipollas.

Pros Is that he well in undressing multiple discharges of old product, comprising produced that contains goodness. I have selected this product in looking for the powder free solution to take 12-15 discharges to paint+ of 100 years of this door and frame like this safely like this possible and has taken a work done. It has not created the sticky disorder has done like this another product strippers and clean up with water. You owe CLOSELY follow directions. This result has required two FAT discharges on two days with the partial scrolling go in. I have used the knife of rigid putty and he fine scraper to paint of the leaf to take it was.

A gilipollas - has taken to PLOT of work - roughly 12 hours of total man to take this result. Admitted has to that it weaves to detail inlaid trim this has required extra attention, but has required still to plot to scrape. It has not been like this easy like the description has done looks. Also, reason is water based and contains sour, any subject like careful has been resulted in breaking to a forest; it has had tonnes of peelings and splinterings and curlings like the result of a softening a product has caused like to be careful like calm uses it. Also it would advise to cover each application with taped plastic to resist moisture in to prevent evaporation; it dispersed to an air quickly which caused to use more than would have liked me. I have used 2/3 of the chevron so only in this one door, doing this an expensive option for long projects. I require to undress roughly 100 sq ft of trim in a same room and been due to a side a lot probably be using this product that considers a cost and of the factors of now of the man. I can fulfil some same results with painting it that takes gun of heat for far less cost and time in good ventilation this in spite of has the gun to heat when I am done.

On everything, can give it 4 stars because he that alleges but has to that withhold the star because it is so only too much the time and the money that eats for a result of final.
4 / 5
Love this material. Have undressed 165 yr do a lot intricate inner paving, molding of window and spends it that this of uses. Has has tried guns of hot and other types of strippers but this does like this said . I prefer a green container a to a blue one of a green has less smell. Perhaps material outside for a blue a.
A suggestion has is if you are down to one disappears how is the ache to leave take some bulk that the economic thicket cushion you can cut to measure. It rubs that last bits were. If you can not finalise that it has begun it when you are in a level of varnish the just coverage with economic plastic on imo this dry too quickly for scrolling a next day.
Agree unless it find the place to dip band for you undressing the produced and that the varnish is WORK any import that use.
5 / 5
Awesome Produced - used it before. I owe that be very careful of the toxic smoke and this can use without question anything. In fact, I have bought it likes him the test to take glue of the concrete porch where carpeting had been glued down for years. Works like this well like some the adhesive stir to the equal that has done as it paints it stir. The amour that is able to apply he in an evening, has spent he in plastic and just walk was until a next day - the a lot of produced are not that easy and forgiving.
4 / 5
I originally tried sanding down this mid century he the modern dresser has bought, but has discovered has had 4 discharges to paint in the, as it has taken too much long. Ordered a tub of fines- stripper (blue lid a) and was impressed enough. Some zones where have left the the real thickness has peeled was extremely easy. A course a harder tried to cover a whole piece while leaving all real thickness. Like this while it apply fat, will scrape was easily. It would recommend!
Also, wear the mask when that doing. With which awhile, a smell has taken mine, as I so only grabbed mine COVID the mask and was a lot.
4 / 5
A product is coming mine in the separate state, that means that weaves to have of clear liquid and then globs of white substance that has not mixed well with each another. It was impossible to extend like this directed because of some two different viscosities have involved. For a way, there is not taking an arrival of varnish neither. It had expected that this would be the alternative green to Methylene chloride, but spends one same carcinogenic look!
5 / 5
These produced was.... Frustrating. Has has wanted to repaint my door forward. Imagined would be necessary to be it the 1-2 project of day. Applied this product to an interior according to some directions. When it has done, it has done incredibly well, but when he no, incredibly fallido, sticky, and left with chunks to paint and these produced that has been unable to take with to scraper to paint. I found it unfortunately so only done well on in the neighbourhood of a door. I reapplies another covers that thinks perhaps so only has not applied enough. I attach included a second time around. Have Almost has used everything of this container for some 18 feet spends squared with nine windows.

Modify: that painting that the rests on spends, unable to take produced was.
4 / 5
Does well but no a better. I have it that has not used never anything like this before so that it is not sure state as to expect.. A table are takes to paint of him could not have had but 3 or 4 discharges to paint.. & I am discovering the discharge of something more than this material will not take . Have undressed a table 2xs now every time leaving a product in the little in an hour covered for plastic so that it has not dried was the quickly of then was in 90s. Will have to go in him at least a time of plus to take a remaining product era. I am guessing I will finalise of a chamber with this last application.

A table is roughly 3'x3' and so only am undressing an upper portion.

Top Customer Reviews: General Finishes ...

Rating: 4 out of 5 with 10 ratings
5 / 5
Has-liked me the law with this arrival! This in spite of, have found that diluting it 1 arrival partorisca separate to 3 parts the alcohols minéraux leave me partorisca the apply perfectly when that uses a RIGHT cloth.

Is of entity partorisca use 100 tights of COTTON. These products of product bubbles like this EASILY if any polyester or man-has done the materials are @@subject if an arrival is 'tugged' dulcemente.

Also, has found that this arrival bubbled on more when it has not been more bent partorisca leave 'ridges.' In the first place the stirred a lot attentively first to dilute reason has the selection of ingredients that needs to be mixed on a fund of one can. Stirring And touching can cause bubbles quite easily, as I have done dulcemente.

Has used this to finalise my naturalidad, table of cookery of forest of arce. I have cut one all the cotton (white?) Mesh manually-the nude width this was in 12 to 18 thumbs long. I have gone these around the paper towel bent and has used a part that laps a lot to apply an arrival. It has dipped in the protective glove and done a lot of dulcemente and attentively. I have touched the little diluted arrival of the mine container with my no-gloved hand (when being careful any to create any bubbles) to a table and has dipped attentively a mesh of cotton rag to an arrival that use my gloved hand. I have tugged an arrival A lot the small and tugging has very achieved another end. An arrival has diluted soyelted' to some leading swipes and dried to the resplandor lustrous. First to apply any new discharges, has left each layer to dry for 12 hours and has used the hand sander with 400 paper the escratch' on a surface the little. A final discharge is remained lustrous. Very pleased and would purchase again.

Has comprised three pics of of my full view finalised of the arrival has applied recently with sun of the window, a final project of an end of a table with flashing, and another final project without flashing.
4 / 5
A law of product adds. It has done my look of beautiful island but has bought the chamber and a vendor send me so only the pint. Wow Trying the people of tear was. It does not buy Him him. They have been included according to which that dips to the focus on concealed said fourth and a real can says pint. I have taken pics.
5 / 5
Knows, I undermount the tank in the cup of forest is risked. But they are also the orderly freak, so that that has is very very cured of. I have done this cup of forest of a arce of old North Carolina slab. Have Never really done with first forest, but can dip the hole in anything and has known has not loved the mirror-finalise concealed would turn my cup to something concealed has looked plastic.
This cup has 4 discharges. Mark sure leaves abundance to time to dry go in and take a humidity in your zone the consideration. Although it was chomping in a bit to take fact, my patience has paid was.
A satin gives the glow has protected beautiful, all some natural tones to really come by means of and leaves some textures in your piece to remain also. Ossia The thin product like this included that 1/16' worm or hole of the termite can not fill all a way. It likes him-me some smaller textures to aim. If it calms of the that, that cures slow epoxy is more to fill them, as some knots some big plus in a picture.
LIKE THIS pleased with Arm-R-Focus! A measure of the chevron is the value adds , but I grab to beat of new empty product to maintain he in. Plastic in a liquid surface any hurt, neither, if you do not go it to use inside the little month.
Happy DIY!!!
4 / 5
Are the sculptor of forest and has been using Arm R Focus for several decades. It is perfect for a surface has twisted usually produced and works well in of the flat surfaces also. Has sculptures in my house that was has has finalised decades and still look well. Application with the rag is perfect for has twisted surfaces. These produced is not without his drawbacks. A lot greasy exotic forest, like Cocobola, prevents Arm R Focus to dry. This can be circumvented for coating a forest in the first place with shellac. I have it it had limited sucedido with drying a surface of greasy forest with painting thinner and other dissolvent. Another question of first order with Arming R to the focus is storage . If a liquid absorbs too much the oxygen begins cementation and once begins to harden the no prenderá , like this calm better use he on something punctual. Once it begins to take sticky is very difficult to avert streaks in an arrival. I have looked for to express an air out of bounced to bend and has reduced my losses, but that really the works is to substitute a volume used with smooth bone , clean, so that it does not have any air in a boot or can. Some spaces among some bones spend some losses, likes measured of bone and subject of form. In spite of these difficulties, Weapon R to the focus is upper to all some other arrivals have tried. They like him to him the finest things, so only precise be treaties well.
4 / 5
Has used to plot of arrivals my day, and has preferred always he Tung produced of Oil UP TO NOW!. When finalising it Parawood Table with multiple surfaces in a construction, as it has known an only election was to dry on arrival. Tried a Tung oil like usual, but GEEZE a smell (has not annoyed me never first, but now he ). I looked it on a next day, and has not liked him a tone of the his prominent Amber, and decided to the just sand has retreated down, and apply some the General arrivals arm R Focus seeds glosses. Usually it prefers Satin, so that it is reason was reluctant of the use in this piece. But boy, the one who the difference!
SMELL A lot PETIT, and has dried on fantastically, and has darkened even a forest further in the tone of the truest forest, which has done really the difference.
Very pleased with this product!
4 / 5
Taking some better results takes some practice. Work with some piece to take used to a product. It is also of entity to expect until a time is warm and an air is dry for some better results. If you are doing alfresco the wind and the powder is another factor to consider . It is not easy taking the perfect glass-like arrival but with some practice is doable. 400 grit sandpaper Among the arrivals looked to do well. Also, your results will vary with a species of forest is doing with. It has taken my better results with Cherry while Sapele required twice like a lot of discharges.
5 / 5
Had not used Weapon-R-Seal first, until it has been ready to finalise to dine he-the project of table has had the a lot of hours have invested in, and the client (spouse) this has said that that has loved to be able to 'used a table to dine without worries adds to leave coverages and maculas. Using the cloth of cotton exerts there is rubbed on 12-propiciado by Arms-R-Focus like the final arrival and really like some results. The only time will say that finally durable an arrival is, but to arrive to this point are very pleased!
4 / 5
This produced are adds. It takes the minimum of 3 toallita humid in of the discharges and I always dipped on four in an upper surface. So much, please be patient with a process. The dry time in hot & arid Arizona was four hours less. Toallita Humid easy on without bubbles or if any one has looked an easy to fix with the light sanding and toallita humid of alcohol minéraux among discharges. The results of finals is spectacular. A photo of headboard of mine and the bank have completed in June 2018. Aiming some results of products. Oak of raw bet.
5 / 5
Honradamente, The one who has 10 days to finalise the table, then the month for him to cure? Certainly a lot me. Any focus in these products is inaccurate in my experience. Mixed a product extremely well, applied covers very thin with to small lint and closely the free cloth has bent, the time of wait was among 12-14 first hours of blockers and recoating. Still with which 14 still gummed hours on mine sandpaper. Temperature to air the half has dried controlled 70 terracings. Everything of some professional informative video has said 3-4 hours among discharges, a focus says 6 hours. The mine is double to triple that enmedio has controlled. Vastly Disappointed in this product, included after such raving and big descriptions. Perhaps it has taken the bad a.
5 / 5
Has used mine eshelter in time of plant' to finally take some decent desks the spatial built and has chosen the General arrivals the stain and the focus has based out of my investigation of internet. They are not a worker of the forest fulfilled or finisher for any piece. I have applied stain and finalise numerous time in a past with successful variable terracings. Doing with this material was so only adds. I have used the conditioner of forest in mine pasador 2x8 project of construction and a stain of Spicy Walnut has been in perfectly. I have on followed with 3 propiciado by Arms-R-Focus and some looks of woman in the vast armoured mine of the office with envying now (and is a one with a good Amish office of Oak to the equal that thinks well with a help of this product.)

Also liked that a lot some beat was packaged for shipment, with some clips in some lids to help prevent to burst was and filtering everywhere.

Commentaries, has bought of a stain and a sealer a same time will be cut-and-pasting these comments to to the another description likes them the experience was one same.

Top Customer Reviews: Minwax 71058000 ...

Rating: 4 out of 5 with 10 ratings
5 / 5
I have purchased a Minwax waters of oil of Satin the polyurethane has based modified and frankly am baffled for some of a less than stellar descriptions of this product. The stained some pavings with Minwax Marcos of the oil based in Gunstock colour. First- the pavings are partorisca be slightly sanded among discharges and he plainly said any to use wool of steel. Secondly, While a time to dry is quickly, which have loved, the common sense would be necessary to say you to do in of the small zones. If it calms it did not conceal and it tries to do too big of a zone, can see where this could present subjects. Tercero, while there is the smell is at all has compared to the oil rule the polyurethane has based. I am aiming my attacker and with which photo. This harm is due to my dogs and a sand spend in a house and a harm that is resulted A photo has finalised is after three spent of this product. I found it very easy to do with and the mine has been in a lot of smoothly, those results in the pleasant feels to a touch and the look to please. For a record- I follows the 62 yr old woman to the equal that seat more any one can use this product!
5 / 5
Has loved this product. I have used everything of a Minwax varnishes of polyurethane. I really like a Polycrylic and used it of then is gone in a phase. It produces the very durable arrival has painted in pieces as well as the product is like this awesome of then can be used in of the pavings. The mine has to that when have in the first place used a Polycrylic, and this does one same. It Likes him the confusion has instructed softly, never shake . This in spite of, there is not founding any sediment in a fund of one can. A person the one who has used a product mixer in the hammer has done the big deception with that. I also paintbrushes of foam of the use. Any particularly an expensive. These times have used a work some. Secret is not to dry the paintbrush on can but leave a surplus drip was; like this, averting bubbles. All the water has based the polyurethanes would owe that be applied in a no brushed direction behind and advance. Like this happy to find this on Amazon and in this prize. No the defender of arrival of gloss, but in some looks to walk well. Dry to walk on less than 12 hours. That he better can ask?
4 / 5
This water-the polyurethane has based to dry a lot quickly, which is the blessing and the curse. A fast-the calm dry time leaves you to add three discharges a day; this in spite of, if I deceive it to you, you better the cleaned on quickly. If no, too late: it is dry! Cleaned on the calm drops grieve to see them. The soap and waters takes it on easily, law like this long quickly.

Has had an accident in that has had to king sand the portion to walk, then king marks and add polyurethane. A portion dried like the aim glazes. I have not done in the, reason have read that it is common for there to be mark targets that will disappear once dry. Ossia True, unless there is the big section of aim. If like this, take it up. If has small lines , aim, will dry clear -- no big sections.

Another more is that there is basically any smell. Two times, has forgotten to dip in my mask and any one there is @@give the to him until it was halfway done. Quell'Concealed would not have spent with stain that has used: A smell was strong.

For application, prefers an applicator of arrival of the paving for water-has has based stains and a paintbrush. It did not like using of a roller thus produced. An applicator and brush left for better control, in my opinion, which has helped to prevent bubbles. And, considering durability, is too punctual to say.

A lot usually write long descriptions, but wants to resupply like this information like possible to some novices there (taste).
5 / 5
Has used Min has produced of Wax for the decades but ossia my first time with this oil-modified, waters it has based poly. I have used it likes him the upper discharge in the core of foam boards which have used like the joint of wall and painted (stained) with the dud technician of grain of the forest. I have used both basic of water and stains of base of the oil, has used this water has based poly on everything of him, and has applied and has adhered equally well in both types of stain. Further of an ease of soap and clean water on, this dry material SÚPER FAST, astonishingly quickly! Cela The good election for joint of foam of this like this easily cut/of warps yes in exposures the moisture. In fact like this I water the polyurethane has based better that a Min Wax Polycrylic, which has has used also. I am not saying this is the bad product , is not , and certainly has the place in an industry, but has found apresamiento such the long time to dry and cure, and ossia sometimes the question. A speed in that this water has based poly dry, recoats and the cures is especially well in of the projects that requires multiple steps, the multiple discharges and the dry time go in. I have read that this is not like this durable likes the water has based Polycrylic under extreme conditions, but for the works projects like this one, was ideal and probably will be my gone-to base of water of the interior of upper discharge. Material Min the paste of wax the house run with this product.

PS - I has gone back reason has thinks that that this could be of entity for any the one who is also new to this product. I recommend to use the paintbrush to foam to apply this material. They are typically the bristle user of paintbrush and have oil and expensive latex the base brushes that it uses SO ONLY to apply his respective upper discharges to take the smooth application and the good arrival when done. These tried-and-the true paintbrushes have not done with this product, any of some paintbrushes has tried was a lot enough, as I finally changed to a paintbrush of only foam has had them in súper cheapies of a tent to paint, but this was a response . It has not been it is because of a súper fast dry time or a combination of water and oil in a product or as, but ossia like him $ paintbrush of foam. A gun of the spray probably would do well, also, but does not use painting sprayers so that it can not speak to this. And, it is not dawdling when doing with this material, and leave of the big projects the sections. Drought like this quickly, calm have that remains directed, maintains to move to the long of and a lot included think roughly brushing in that has done it already, although the calm only second does. To the left dry entirely and then see the one who looks, will look worse to try go in the moment tacky.
5 / 5
This material is terrible. I have loved like this the product and he there is much less of a terrible, overpowering the smell of the polyurethane of oil has based. It has applied first polyurethane as no the total newbie in application. Drought LIKE THIS quickly that the difficult fact to not having streaks. It redid my pavings of forests. It has finalised that it has to that whole king of past of the sand, which has required king-renting walk búfer (extra raisin), extra time, endeavour and plots more forests (& maintaining polyurethane) flying everywhere. Has has had to that then spend for a process to take all a powder of some pavings, window sills, near of base, etc. first to redo a paving with the polyurethane of oil has based.
5 / 5
On 30 years now doing work of cupboard. I love a water has has based polyurethanes for his lack of smell and facilitated of cleanup. But they were all is disappeared something, a beautiful yellowing and durability. Finally any one solved it. Ossia A polyurethane of oil has modified. Aka HAS the oil of polyurethane of light has bitten based in a formulation. It is still water cleanup, although to the soap of good dish likes dawns is required to dissolve to clean a paintbrush. An arrival looks wonderful. Owe your yellow wonderful that that the polyurethane has without a smell and hastle to be cleanup.
4 / 5
Absolutely HORRIBLE RESULTS. One produces has received was labeled GLOSS, that has ordered was SATIN. I have decided to use he more than going thru a time and hassle of the turn.
Is the milky colored produced in a thickness of the sobresalto of tins has melted. I have applied he with the NEW paintbrush to the equal that has instructed. A lot I last to see zones that has had state covered unless visas under the light of brilliant tent of a corner. It was hard to maintain at the head of a speed in witch has dried has like this state applied. It has been applied in sanded and oil stained forest of fir that was smooth to a touch after a stain has dried.
An only thing that was true in a description of era that he drys in 2hrs. But to the equal that has taken, any one @subjects that has tried, was the mottled arrived partorisca gloss that, when dry, has had the texture of 120 grit sandpaper. I have finalised to use wool of steel refinado partorisca soften an arrival. Included when I have applied the second spent and to the left dry a coarse surface king-has looked.
My recommendation is the SO ONLY the use loves quell'esel lip released surface and does not concern the one who some looks of arrival.
NO MORE Minwax,, going back the tried and some Varathane or Brushing Lacquer.
4 / 5
Are quite new to a world of woodworking. I have begun recently build some easy pieces of furniture and has required the good arrival to protect a forest and a stain. I can very easily obtain oil-has based arrived where alive, and fully recognise that a woodworking the community generally sees oil-has based poly like the upper product to water-has based poly. I have ordered this oil-modified, water-has based poly in of the hopes that would resist it on well further to offer protect decent of my products. An only arrival had used previously to of the this has been Minwax polycrylic, and this was so only partorisca to to the smallest projects like him the dishes of of prizes.

Was pleasantly surprised reason well these works of product, especially given his seal of reasonable prize. Calm visibly can say a difference among the zones where has been the applied and where the has not been applied. A texture is noticeably different also--I would not call a poly-has applied describe 'the hard rock,' but resupplies the good shell, and sure chair in his capacity to resist on while it is used indoors. It has not been that would trust he for external projects--I can does not see that it resists on incredibly well for the period along partorisca time against some elements.

Requires to apply multiple discharges. I have used two discharges in the frame of table (to good sure require at least a discharge of plus) and four discharges in a tabletop. It concealed still it can not be enough for the room to dine tabletop, which takes to plot of heavy use and takes the just quantity of abuse. I sanded among a second and of the fourth discharges on 320 grit to achieve the very sheen.

Like the point of reference, a farmhouse dining table of the room down has 3 discharges in a tabletop and so only one in some legs/of frame. I hadnt finished still. If you look closely in a fund of the each leg, can see where poly has not been applied still.

A table of the way of the entrance there is so only a discharge in a tabletop and a discharge in a frame. A tabletop sheen is attributed to the combination of oil-produced he acrylic based coverage for a discharge of poly.

Recommends this product for any one looking for the good water-the arrival has based that it will not break a bank.
5 / 5
Are not even sure where to start with with this disorder... I have seen mostly good descriptions for him and read to plot of a Q&A, and looked quite good and value an investment. I have applied he with the good paintbrush bristled to to paintbrush likes a bit the instructions said and is immediately state taken was guard for gloppy and the thickness has applied, was likes to look for to apply in pupil of note likes them to them the paste or cement of of hule. It was really hard to apply equally, and while I expected it to a large extent self the level was like another polyurethane, at all of a class. You could see each one has shot of paintbrush and zone he so only glopped on. I have tried sanding he down with the end sandpaper, cleaning thoroughly and applying he with the roller to foam this time partorisca smoothness and was included worse. One thousand of the bubbles formed and is gone in like this gloppy. They are tin like this angry a lot included see directly right now, enough take some ruins to project to arrive to this point... Avert these rubbishes and take regulate poly and is gone in thr time for some extra discharges.
4 / 5
Has used Minwax produced for several years. I have purchased this for a first time; more than a product of typical polyurethane has used in a past. Deliberately I experience seeds-gloss to achieve it sheen in my cupboards of cookery of the walnut. After initial prep to clean cupboards with murphys soap of oil, has applied a first discharge drought left, a next day has applied another discharge. Can say you it is the fast drying has produced. I have tried three types of paintbrushes; nylon, sponge and soft hair and a result of final was two disappointing facts: 1. Some seeds-to the gloss was no better that he crazy arrived and lack luster. 2. Difficult to achieve smooth, effect of level. I can not speak roughly durability of this product. The clean water up was the prize. I am disappointed enough after applying two discharges that will not purchase never again.

Top Customer Reviews: Minwax 33333000 ...

Rating: 4 out of 5 with 20 ratings
4 / 5
All has said this no yellow or affect a colour of a piece was refinishing. Some the official instructions do not mention never use in products, so only in stains. So many, my deception (?) Partorisca Use painting of white chalk east drop; all my investigation to this product previously to use declared the would not affect a colour for any way, and has the habit of focus of upper discharge inner mobile. Still it revises on-line for another has said that could be has used in this way to paint of chalk. To use it has been in milky aim (as expected) and dried with the yellow haze in streaks. This project was the longitude , the time accuses intense with multiple phases to refinish some elderly. Using this minwax was a FINAL step and I was like this disappointed to see some results. Look live in the house of the smoker for a past 40 years. It can any never recommend this product is trying maintains true colours down that; perhaps to use in a cup of stained forest, but has not painted never. I am resisting to a product to try in stained pieces; but this a lot of yellowing? I can not to imagine it it would resist colours of true stain neither.
5 / 5
Has used this to dip the upper discharge in my again painted cookery cupboards. I have used the paintbrush of product regulate to apply the discharge of the what on has painted recently cupboards. Two discharges and my mark of look of the new cupboards

Opinions: the mark sure applies the thin discharge, and use the paintbrush to foam to clean on any buildup. If you have dipped in heavy or leave exceeded in any nooks, dry yellow
5 / 5
uses this so it glosses it upper discharge for my acrylic and utmost products. It does not have the strong bad smell, in my opinion and is very easy to apply and dry quickly. If I need the lustrous upper discharge for acrylic products is east.
5 / 5
Has read all some critical negations and all some positive critiques and has decided some negative people have any known the one who has done and would be very better. I have not been... I have had some same questions with him not going in uniformly, with a lot of heavy blobs here and there. This in spite of, half way by means of a boat, has taken a hangs of him and finalising with the good smooth arrival. Material there have it so only the curve to learn.

Mina 2 cents, uses short explosions of in the second or the little less and does not take a blobs.
4 / 5
Love this product to finalise projects of the art of forests has painted. It seals my painted draws to give the the protective coating and I love a resplandor of big gloss. There is any overpowering smell like that can use indoors in my work of studio subjects how is a lot afterwards my cookery and living room this in spite of take any complaint of a family. A product is fast and easy to use of then is the water based and all I need done to clean up is run my paintbrush under a tap for the pocolos small. A discharge of this dry súper fast leaving me to finalise the project with several discharges the day. But for more than the projects find that a discharge is enough to give the piece the resplandor decorative. A word of precaution to crafters this in spite of, yes use any of an oil based 'pens to paint' in the precise project adds this characteristic of pen of the product After the poly-and a piece. If you come from to polycrylic in yours pen to paint the draws can break down and smear some colours of pen of the product.
5 / 5
The product adds! This small can goes the long way, was able to use it to seal an acrylic product in the dresser I painted and still actuate almost one beats the whole has left. A focus (lid) the law adds so I am able the reuse a product again and again. Calm to precise use good insurance the paintbrush of big quality with him this in spite of otherwise will remain with shots of paintbrush. Has the good thin consistency, any clumps or to the to anything likes concealed.
5 / 5
Has painted 3 insiemi of cupboards and in this together third has decided any to buy an on priced box. I so only bought some product of quality and cleaned and sanded. Well in a tent to product will say calm with pertinent prep any need the upper discharge... You do! I have it that has not used never any class of poly, has been so only my tent of local hardware and has had the type explains it mine. I attach this reason all say and all have read dictate will have the bubbles require the slightly of sand and dip the second spent. No a chance at all for me. I have used so only he well synthetic paintbrush and brushed the thin discharge on. It was able to dip the second spent thin on a lot shortly after that. This material look adds and to seat likes slick likes glass ( has taken seeds to glosses so only no liked me to him one the satin has used in of some cupboards) has not been that resists on closing but looks strong and is VERY EASY to do with. And a dry time is like this quickly the a last very easy!
4 / 5
Are no expert, but has struggled with some bubbles in a poly subject that vexes everything. You can do investigation and find some arrendatarias basic to apply poly, but here is the pocolos incidents of mine.

1. The technician really will solve more, but a lot all, a subject of bubble. And the decent paintbrush.
2. Applying in the basement, in winter, with the dry heat this material dips on quickly.
3. It tries to dilute the. I have begun to run down in the no critical piece. As I have touched some water in (30?), Mixed the on, and slopped he on, raping each thing of technician only had learnt. In fact, I am exited of my way the present bubbles. It has gone back 30 minutes later and was a better application of a whole project.
4. If pertinent technical utilisations, continuous in súper often. It uses the tonne of product. And calm then the the sand and paste he with another discharge. Suspicion that spraying the version diluted of a product would be an ideal solution . If I same do the project this big again, neither will expect until state and oil of use-based (external as it does not turn a house to the dump of toxic waste) or buy the sprayer.
5. Súper I fat frames look a lot plastic-and. It is a reason loves me escape of Poly totally.
4 / 5
After a lot of tests and the tests that use waterborne the lacquers is and deft. Here it is like I taken to surprise results:
any to the SOBRESALTO CAN HE!
Takes the clave of confusion and stir it, otherwise takes the boss for some reasons as it will leave bubbles in your project (in my electrical guitars of chances)
have any sprayed a polycrylic but has used the paintbrush of foam. Spent a wooster marks some. An economic plus some leave the roughest arrival. It is water has based calm so much can wash out of a sponge.
When brushing it On:
Tries to take it everything in a has has shot. It does not maintain going back and trying cogerprpers well. Your sponge of movement dulcemente and will not finalise with so the bubbles and like it has said, does not go back and retouch. It LEAVES IT SO ONLY.
Is the target when calm dipped quell'on, is so only fatter there and dry clear calm to leave it so only.
For me, taken around 8 total of discharges.
I paintbrush in the discharge, attended the hours of pair and add another discharge and 3 day/of discharges max.
Create a next day and slightly sand he with 320, the swipe was and toallita humid with the tack rag and he throughout again.
I usually expects 2 first weeks of wet sanding 600,800,1000,1500 grits and buffing to the big gloss (mirror) arrival. Utilisation Meguars definite compound in the 3' tampon to polish of the foam in the wireless mine makita hammer. All can be bought on here.
Expects that this help has to that the way that has had to that imagine was for my account. The test and the error is frustrating.
Btw This dry material quickly, And dry súper hard. Also, you are coming from using niter or regulate poly, this any 'burn in' as this material . You will owe sand to take it to stick if it is too dry. Good regime!!
4 / 5
Has used this in my person of 100 years that dines table and cupboard of china to seal pickling stain. He no yellow, how is perfect for white surfaces. Used four thin discharges. It DOES not APPLY WITH A ROLLER of FOAM, any do any! Will have bubbles, and will owe sand. It learns of my deception, please. It uses the paintbrush of big quality, any of this dollar-the tent craps. And sinister cures he for the few days. You will be like this happy has done!
4 / 5
I have read all some critical negations and all some positive critiques and has decided some negative people have not known the one who has done and would be much better. I have not been... I have had some same questions with him not going in uniformly, with a lot of heavy blobs here and there. This in spite of, half way by means of a boat, has taken a hangs of him and finalising with the good smooth arrival. Material there have it so only the curve partorisca learn.

Mina 2 cents, uses short explosions of in the second or the little less and does not take a blobs.
5 / 5
Has used this product partorisca a lot of projects and always does really well. I have learnt that you have to that shake this material A lot partorisca take better results. Also it is quite thin and pursue easily so much is more the spray of roughly 18' is of spray the pair of discharges read and has left the dry for 30 minutes. Slightly sand with 320 grit sandpaper and respray the. I this four times and he usually results flawless. Also agree, when you take the discharge sprayed, can look a bit uneven right with which you spray he, but yes calm has left plants for 30 minutes, he still was and will look the better plot. It is easy to clean up and ventilates well. It does not have the strong smell.
5 / 5
Has seen another reviewers complain in spitting spray and has had a subject same. I have directed to do well with one can, another 6 I has tried was the enormous question. I have shaken of directions, included dipped some beat in 90 water of pot of first terracing to shake. It has done a lot well. Tried to brush of spit with paintbrush of foam, but something sinister darkness, or has eaten the product. Now I owe that sand and beginning on.

Has found another product, the clear lacquer has called Deft, give it 6 stars. It can be purchased on Amazon or Imposición of House (more economic there). The spray was flawless, any sanding has required among discharges. I have applied the sprayed produced of chalk in cupboards of Arce. It requires well airy zone, so only likes Minwax has done.
4 / 5
Has has wanted to something to spray the arrived protective in my Aeroplanes of Radio Control. Minwax Polycrylic Was my election. A lot easy to use, drought a lot quickly, and looks to be the durable arrival. It is water -based and does not affect an arrival. Sprayed Two discharges read in a plan. I have used an arrival of the clear satin but he can be purchased in glossing also. In a future will be them to try in the well protects an arrival.
5 / 5
Has used this to finalise the chair done of the mix of solid and plywood. A spray is invisible as announced, and dry a lot quickly. An arrival is hard to the something but is satiny and done a grain of the richest forest, but a lot too much. @In rodeo, loves to maintain a look of raw forest, this helps varnish a forest while doing the minimum impact. Yes he correctly, an arrival would owe that be smooth. I sanded among discharges and three discharges in of the totals. My chair is has located indoors so that it can not say that well it resists until time. In general this in spite of, the external pieces of furniture would owe that use oiled has has based varnishes anyways. Has Has complaints of splats, while one can does splatter sometimes is not too bad. Spray So only out of a forest in the first place and then spray in a forest when a spray is same.
5 / 5
Could not find this in this arrival in my tents of local hardware, as I ordered it on Amazon. It is FANTASTIC for white cupboards. It has not changed some boos or have any one maintained at all. I used it on Sherwin Williams produced of Big Gloss in Big Reflective Aim. 100 it recommends.
5 / 5
Laws well for darker colored projects, but beware the lightest products yellow.
4 / 5
Easy to apply the life has propiciado the subject has bought in fb warehouse ..Type of interview in the edifice to walk said me roughly that ..Arrived quickly , without accidents and well a prize ..
5 / 5
Our product there is not coming with the spray or a straw to one has beaten. I have tried it imagines it has been something more to dip his, but does not have to that it has been has gathered fully.
Has tried to return this element down defect, but is not leaving any turn any @@subject that.
Be careful! You could take the defect a.
5 / 5
There is disappointed incredibly with this product to the equal that has destroyed something are to spend the long time and the endeavour that creates. As you can see the photos have used a product in white product and he bad yellowed the. The the side for comparison lateralmente of an original colour and an after effect of this sealer. It has impacted Everything of some colours has used to do looks him has lived in the house of smokers for 100 years. Absolutely the heart broken.

Top Customer Reviews: Minwax 630500444 ...

Rating: 4 out of 5 with 10 ratings
4 / 5
I have used this partorisca protect two external chairs. Place four spent. Now some chairs look of sound.
Would buy this urethane again!
4 / 5
Fiberglass Door & Sidelights for ThermaTru: Cleaned with alcohol minéraux (the thinnest product) using clean soft pieces of shirts of cotton. Originally I have applied the Walnut Gel Stain to both sides of door, then clear coated before I have installed.
2 propiciado by Helmsman using Wooster 2" Paintbrush of Tip of the Money, the clean paintbrush up with for the prejudices drenches in of waters he & Detergent flatly, then air dry.
Prognosis of time of the first control to apply.
Looks mobile :)
4 / 5
This description is not in a quality of a Urethane of then is the a lot of very a condition of the nave certainly can be improved. The mine has arrived almost with an open lid. It had filtered during a container and a plastic stock exchange has been wrapped in. Please Please dip clips or coverages in these beats like this some lids remain firmly in some have beaten! Thank you For advanced for any improvement to the respect.
4 / 5
Of the normal polyurethane can not be applied in products of latex, this resupplies protects adds to use in products of latex in mobiles or if the element has painted goes to be exposed to time, brushes on stick to almost anything so it protects to surround surfaces!
4 / 5
Has applied several thin discharges to an external bank. It has not known it has had one for external use. Result really good. Easy to apply with the paintbrush of foam and easy Cleanup.
4 / 5
Are very happy with a water-the version based of Helmsan varnish. Utmost arrival , durable and a goodness added to water cleanup.
Has used this the spruce on a woodwork in a boat. Maintained in a cradle on Michigan of Lake all season and is still shines brilliant.
5 / 5
All was bubbles of cause in a container of the plastic plant and another did not bubble but a sheen has not been a lot shiny. Perhaps reason has been painted in the first place in plastic. No for plastic at all. It is it disappointed
4 / 5
Ossia a first time has purchased this product of Amazon although I have used this product in one drives of external stair for years! It likes that continuous in easily, drought relatively quickly, and offered of net very easy up.
4 / 5
A poly has the very yellow boo his, more than the polyurethane rule done. I recommend to use the in the forest the dark plus. I have decided that would save one beats to seal on my fence instead. I have finalised sanding out of a discharge has asked my original project.
4 / 5
Art of drink in of the llamas and find this to be a better arrival for my pieces to help with turn and isolation. Always well of the find on sale although amazon also! Frequently it can find this product or some seeds-gloss on sale here, like cost as never an on sale east at the same time:)

Top Customer Reviews: Minwax 409160000 ...

Rating: 4 out of 5 with 10 ratings
4 / 5
I have found this material so only fabulously easy to do with—has discovered once that a better way of the apply to the recently stained the surface of forest was partorisca DRY on with the MICROFIBER cloth. A process has produced the smooth-like this-arrived of glass in two spent! (Sanded Slightly among discharges with finals sandpaper.) A prize is a ultra-fast drying time. Down it has animated (any hot) and conditions quite dry and a first discharge dried in 30-40 minutes! I have used also this poly in a unstained (but sealed) the piece and some results were equally wonderful. Clean- up is easy with soap and of the warm water. Be sure to thoroughly washed out of your microfiber the cloth when done; among applications, maintain a closely sealed cloth in the plastic ziplock stock exchange like any dry was.
5 / 5
Has purchased a wipe of clear satin in poly.

Was refinishing an old table. I think that that it is arce but any 100 insurance. This was my first time doing with poly. Some the leading owners have had although it looked the hot pot in a table that leaves the very deep burn mark.

I prime minister sanded down a whole table and sanded out of some frames of burn. I have applied then roughly four or five propiciado by this poly. I have used some economic sponges have bought on Amazon. I so only squirted the bit of a product in a table and used to an applicator of sponge and applied it slightly equally. I have used the torch to shine in a table to underline any bubbles. They are so only be in this zone again slightly with a sponge. This material drought quite quickly law like this calms of need quickly. In general I have not been a lot of subjects with some bubbles. So only it would spend when I have had too produced in a zone.

After applying a first discharge, a raw forest will absorb a poly and fluff up. So after a first discharge has used the fine grain sandpaper and slightly sanded softens with the pocolos throw manually. I have left I dry at night among each layer. If the parts of a table feel the little rough among discharges, sand the only paper run in the a lot of slightly. Mark sure to take powder.

Has applied a poly external reason in a container has said that a smoke is toxic and would not owe that be breathed in. I have then left to dry for the few first hours to spend it inner. I have found that a smell was surprisingly extremely sweet, included well with which application. With which was dry, is remained there the light smell. But it has not gone too unpleasant. So only odora like this odorare take when calm new mobile cost. I guess it concealed it is the one who poly to to the smells like.

Has applied so only this poly and at all more. It was pleased really with some results. He really spent out of a rich colour gilded of a arce, and has left he with the good-looking glow and the resplandor thin.

Was really good to so only has to that buy the alone product and take these classes of results.
5 / 5
Has done well. I have used the paintbrush to paint, as I have found has given the smoothest arrival. I have tried the polyurethane rule and was incredibly yellow. This has not been, this in spite of, if calm many covers can yellow down the bit, as you are loving several discharges could find dull bit it. I tried it on the first neighbouring. If it check a picture down, can see a base of oil in an accident is a lot of yellowed. A waterbased is in a legislation. Ossia A discharge of the each one, in white product. Look in a half upper included there is the something dark, this was an excessive drip of a water-based​, which left to know that calm dipped quell'on quite fat also will be yellow, as I have maintained thins with just two discharges. Turned one 80 is has on beaten piece of Allen of Ethan to the beauty to paint aim and then that does the discharge of this base to water poly.

Also has diluted he for 1/3, with more than water.
4 / 5
Can any gone bad with this mark. If anything, would recommend hard-working of word of the novice to look some youtub video in a 'to the equal that to' to apply waterbase poly, then experiences on some first forest to do a real reparation/refinishing. Ossia The arrival /of dry satin , but has found yes calms simply is trying refinish the table this in spite of takes like a result of final of gloss of oil, is possible with this product. I refinished 3 tables and with which 3 months all the controls on perfect with tear of big/wear w boy and familiar daily use. There is the concrete way to apply poly (water of bases) to the arrival inclusa smooth different that varnish like this like this, a youtube vineyard. Recommendation. To the as it likes me is does of calm does not smoke . Any messy clean up with this water has based poly. Drought quite fast. Hardens When, And like this state of focus of the product. It has taken awhile for me to transfer on to water base poly. They are happy has taken one submerges. I have found gradual 600/800/1000/final 2000 grit paper of sand and some well, slow water sanding, the final discharge of this poly getsa arrival of varnish /of final comparable oil durable table upper result. 5 Stars. I produce it adds.
4 / 5
Builds to plot of mobiles, and has trusted on oil-toallita humid based-in poly like my gone-to finalise for years. One sew key to comprise in this product is that it is entirely different of oil-toallita humid based in poly, as it can not try apply the using some same technicians. These produced is much fatter that an oil-material based, and dry Much faster. Have Perhaps 30 seconds to do with him once paste a forest before it takes tacky. You owe that do very fast to maintain the working zone wetted in a surface like your shots blend together. If there is to macula, so only the ignore and the sand was later. A key to do this sake of the look is to build on a lot of discharges, and then use very a lot of sandpaper to buff/polishes a smooth surface. For a piece of sample in a picture, I 7 wet discharges-sanded he with 600 grit. Need of build on the thickness quite layer that can you the sand was all some imperfections and any paste coffins forests. With which that can the to you polish further, or use to wax of paste up. Some instructions in a container say to use the cloth to apply an arrival, but has found that the paintbrush of foam he much easier to apply a same discharge. Take a whole surface coated like fast to the equal that can, then quickly go in a surface learns again using overlapping shots in a same direction to same of the things was. A big goodness to this water-has based poly is that no odora. With oil-has based poly, has to expect the week or more partorisca rid mobile reasons a smell is overpowering. This material is good to go hardly is dry. I think that an oil-the material based is more foolproof, but a difference in odorare prefer me a water-the products have based.
4 / 5
Was new mark to dip arrivals in pieces of furniture of mine of the forests and this there is not disappointed. I used it to cover one 8-chairs to dine the cups to subject concealed is coming our unsealed (nightmare to maintain clean and the something release). It has dipped on three fat discharges that use he microfiber cloth. It would dip the thin discharge throughout and before it has dried would add another thin discharge. A table drenched on a first round, a second averts could see a satin sheen, and a last an era súper easy and clearly has not required so much reason has not been drenched in. Has has had to that do the small bit of sanding something after a first discharge, but was extracted no big .

Dry quickly and has not had any question maintains it free of streaks or frames. Has three cats and the boy and any subject has dried of then like this quickly. Lava immediately book with water (and the little scrubbing) and while it is not dried was, lava well out of some cloths have used. I can not testify for him dry was and calm then try wash. I will be to buy again to do all some chairs. It has taken so only the averages the bounce to cover an integer tabletop!
5 / 5
If no the appearance to go to like oil-has based poly ossia quite good. It looks to take absorbed to a forest a bit but I on some joints of pasador is and is good and smooth and I quite enjoy a natural look. Almost any one smokes how is reason has tried this. Has the habit of the oil has based poly and has required much more of this that would have expected. I have purchased the container so only while has leftovers and has had to order the second a to take a work done.
4 / 5
Has given our chair repairs the perfect satiny arrive it on marks and full forest. Have takes some arms out of the light mahogany that dines chair and has had to fill in a zone with stain and full forest. I have finalised sanding out of a stain (any one a right colour or shadow) and redoing a staining with bookmarks/marcadors of stain and then using a poly spent. A result of final was roughly 95 perfect. Highly it would recommend this wipe-in poly for ease of use and aesthetic.
4 / 5
Has finalised so only 3 pieces of furniture for the room of my edges that use these materials and was awesome! Súper Easy to apply. I rubbed it so only on with the pieces rasgadas of tights of old cotton. Continuous in easily, time of decent work, and although it feels likes has done deceptions during application, dry smooth and almost the clear crystal! Very minimum yellowing has compared to the oil has has based produced, which is that it has loved. Really it preserves a colour of natural forest. With which some test and error, so only will say you wants to do really thin that calm probably think! So only equally rub in the small quantity, has left the dry, slightly sand, and king spent. The 3 discharges and took it súper smooth arrival , perfect! Pro Tip: with which yours third discharge, rub all the surfaces down with the piece of paper of printer. Work like the very well sanding/buffing and softens out of some final bubbles and specks of powder. Also, I am spent for 1.5 bounced to do 3 discharges in these three pieces, which comprises the half sized 3 dresser of drawer, the slightly big 4 dresser of drawer, and he nightstand.
5 / 5
Has bought the discharge my office has painted. Used the 30 poly- 70 mix of water in my aim of products of the office. Required to use 3-4 discharges but has be worth it. I have used soft-bristled brushed in suns of long shots by means of an office to create the good smooth arrival. Like this far it has no yellowing or other discolorations, and looks to resist on well with waters spilt. To good sure lived until my expectations. Tip: it does not rub in too much or it could cause macula your work to paint, especially yes watered -down a poly. It will dry quickly, I have done it covers 40mins-1hr averts. Applying too quickly will cause a poly to stirs on and is not quite neither smooth.

Top Customer Reviews: EPOXY Resin 1 ...

Rating: 4 out of 5 with 20 ratings
5 / 5
The product was to add and to fact likes him Epoxy has to.

This was my first time with Epoxy as I will share my experience to help a next victim :)

Crafted 2 tables to finish and has wanted to inlay the picture under a epoxy, Looked several videos and read that is in the.

Tips:
the powder of the CLEAN CLEAN zone CLEAN will kill you. ( It explodes in garage with the open door, no this)

Prep, HAS TO do the cloak of focus, reads this and has thought ehh, I prepped a quite a lot of forest and skiped this. It favours in a lot of bubbles of air. They OWE of it FOCUSES! It has battled it bubbles for in an hour while the upper cloak has dried. Then they were bonded under the upper cloak and looks bad.

Mina touched quite 3' thick. It does not try to do each immediately. I have done and it was the deception . The FAITHS EXTENDS!!

But yes is how me and haste, any preoccupy . It looks the video has done so instructed.

Has taken 80 grit paper of sand and sanded down bite it. The streaky and clouded look what heck. He no preoccupy !!
Has taken then mine Dremel and recorded out of some bubbles of air! ( I knows the crazy sound in me also)
HAS DONE then the poor very thin and fast. It looks the glass and everything airs the bubbles are gone!

Has wanted that the result for my first time,
He take a thing of my description, left the be to touch cloaks of multiple thin!!
5 / 5
Afterwards be motivated by a lot of videos of Youtube, decided to take the stab in art of resin and has begun has been to order this product. After reading the few descriptions, give the plot of frustration could be it has derived to read and that follows some directions very carefully. If it is for art or coating the tabletop, always does sure in:

- gloves of wear. This material apresamiento sper sticky and will take everywhere
- do sure anything is coating is lined with paper of wax or newspaper or anything to take a resin. Once he hardens, difficult result to take!
- Always blend the 1:1 proportion and uses the cup in measure. Please very eyeball the, otherwise does not cure properly and will remain with the tacky and sticky unfinished project ( learnt a road takes)
- the marks sure is the thorough mix also! I have used the popsicle bonds and has done sure this has taken some fund and some sides
- has the window has limited to do with a resin once is blended. Has the plan in advance of the this wants to conform
- no preoccupy has bubbles. It continues to do against this window has limited, and the hurriedly flash of a torch the paste or the pistol of the heat will take some bubble
- the mine used since like a project of art, required to do sure my cloth was big (with a help of cups) likes resin dripped of some sides. And also he sure to rub in some verges before fully it cures.

To well sure will be to order more than this product!
5 / 5
I postpone to buy epoxy after the histories to listen of numerous horror and seeing some firsthand disorder ups (bubbles galore, sticky arrivals, etc...). Desprs Posing quite 15 cloaks of polycrylic in my slightly uneven tabletop (rasgado and stained 2x4s as to any sand could soften) still has not been satisfied. There are 99 pieces in my tabletop and does not want disorder up. Desprs Looking numerous videos the numerous time at the end has taken a nerve to try epoxy and for the first beginning of timer adds! A tone for me was to do sure to have equal parts of the each and the blend the set for the full 5 more minutes. I have used the bustle to paint of metal of clave of chevron (or these looks have the propeller in an end) and has used the wireless hammer in a low pose so do not take even more bubbles that the already had. Once it applies used the pistol to heat to take rid of some bubbles. The photo has attached.
4 / 5
I have used this to finish the afflicted the cup of the forest done for my island of cookery. In the principle has used urethane, but had too many cracks and crevices and my woman has said that it was also take to maintain clean. As I have lined in a surface with 220 grit sandpaper and has used epoxy to pose the very smooth surface in the. A product coated a urethane without problem at all.

Anteriorly Had used JB Weld the liquid premium epoxy with terrible results in the anterior work - an arrival has turned milky while it cures and a piece marred . Any insurance that was bad like the instructions were minimum. Because of some descriptions add and the reasonable prize has decided to try that this the glass Clears epoxy resin. Some instructions were of sound. They were very detailed with a lot of tips to take utmost results and very better that some useless instructions that is coming with a JB Weld product.

An arrival is begin very good and my woman is happy! I gave it only 4 stars so that some scratches of arrival easily. I actuate Only the used some crowns of island the few weeks and there is already scratches and scuffs, in spite of using reasonable precaution. Desprs Has used this product gives that a same company done the similar epoxy for the Cups to subject this is supposed to be harder. If I take too much the scratches can go for another cloak of a Table Upper version to see yes is more durable.
5 / 5
Purchased some epoxy of the big woodworking tent of supply. $ 130 Prende resin and hardener. He no come with instructions only in a backside of a boat. 2 - 1 mix, blended two different tips and both overheated, cracked and bubbled terribly. It do not have to the good luck with him, probably more error of operator that anything. This material has been recommended in me. His half a prize, 1-1 mix like any mathematicians and the wine with 4 pages has detailed instructions. With some instruction of professional seasoned and these instructions some tips that the surprise resulted. And know some instructions are not bad, the clouded the turn when begins to blend a two joint, but after quite a lot of 3 minutes can see clearly in a fund of a cup. It opens Only blended 3 ounces of the each every time for the total 6 ounces for each cloak for the total of 8 cloaks, 2 fat inches. This material was fantastic, easy the blend and the result adds. To well sure it will use in a future.
5 / 5
Material adds. According to the time ordered it. Used subjects he for my restored 1946 Logan 10x24 gone back. This turn weighs quite 450lbs. Any sign to crack in a resin at all!
5 / 5
It IS clear glass ! If it wants to be the small soft, likes him the hard press with your nail of the toe and he will leave the small indent then, the mix that says... If it wants to be taken like the rock, uses only the touch more hardener that resin. Calm expect you to touch all a resin was then each a hardener. To do that of course final with more hardener been due to like fat and sticky a resin is does not think so a lot of final of resin in a mix that hardener. If it is your first time , game with him (these odd sounds lol) finds a proportion these works. Calm always maintenances in alcohol, a hardener is much thinner, blend easier and any bond in some sides of a cube to blend like some marks of resin. Included even so, I have found that blending only the pinch more hardener mark sper take! I have used he for the counter of cookery that built and still has the left wing of abundance on. They go the long road!
5 / 5
Has so sake to say in this product. Law with epoxies before this alleged to be clear and has not been. So a lot arrive the front goes to say that that is to say a product a clear plus has not used never. I me the table of coffee out of the plywood with the wise bonded around a verge. My idea was the cover he in epoxy to do something some boys could eat dine on or the guest could pose his drink in and any one the preoccupy on spilt them that career of a verge of a table (the liquids would be contained by a epoxied twist). The decrease of long history, I quite decided in wing he, that guesses a quantity would require, stirring violently (all the world said that this will cause bubbles of air), not beginning with an initial of thin cloak, and doing an interior of whole thing with the follower on while I very choke in my sleep ( has liked him every day during 2 months here, and wants to take this arrival). Result perfectly. A bit epoxy go the long road, entered with A lot of bubbles but dried without them, and a material does not have any steam. I seat fully in 24 hours have used the reasonable quantity and no an ocean.

SUBJECT COMMON
has read revises in a product that is sticky and not drying never. SURE when being to touch a hardener in your cube to blend FIRST, a epoxy SEGUNDO. This has to marks with some sides of a cube that retains cradle epoxy that never will solidify. I trust me on this. It recommends the blend with something recorded in the a lot of-bit recorded of hammer and only using the hammer to be able in, but blended manually for the few minutes.

Has read revises of the same very when being any 1 chevron -- both bounced to ATTACH Until 1 chevron.

My table is pictured. It uses plywood for subflooring, Stain again, 4 legs of tube ('Decoration of Tube 12FLGLEGS Table of 24 Inches the Place of legs of Complete Industrial Steel Grey') and 5 soda-beat it sized titulars of cup ('6 Titulars of the cup Bounces Plastic RV the Car truck Inserts/Inserts the sofa of Regular Truck Inserts/Inserts Pocket of the table of the Big game Recessed'). The blend epoxy used '20 8oz the cups of Claro Plastic Graduated Disposable painting of Mix, Mancha, Epoxy, Resin.'
5 / 5
Awesome Produced. Sper Excited and happy with one was come . Done the penny toolbox cup. Start to surprise. Vidoe Nexus Of cup of penny.
5 / 5
Using this epoxy has built the glow in a table of dark coffee that amours! It solidifies In the pair of the days and he do so expected! It suggests to fill on some holes with something cheaper likes him glue of forest to start with with and then begins pouting epoxy blended with glow in a dark powder that can be it easily on-line coverage. It is not cheap in a glow in a dark powder so that really the fact the difference.
5 / 5
The product was partorisca add and to fact likes Epoxy has to that.

This was my first time with Epoxy to the equal that will share my experience partorisca help a next victim :)

Crafted 2 tables of finals and has wanted to inlay the picture under a epoxy, has Looked several video and read like this to this on that.

Tips:
the powder of NET of the CLEAN CLEAN zone will kill you. ( It has done mine in cochera with the open door, did not conceal)

Prep, HAS TO do the discharge of focus, has read this and has thought ehh, I prepped a forest quite and skiped this. Advantage the a lot of bubbles of air. DO SPENT of FOCUS! I have struggled it bubbles partorisca in an hour while the upper discharge has dried. They are then states stuck under the upper discharge and he looked bad.

Has touched mine roughly 3' often. It does not try to do all immediately. I have done and it was the deception . DO SPENT!!

But yes are taste and of haste, does not concern . I have looked the video has done like this instructed.

Has taken 80 grit paper of sand and sanded down bite it. You look streaky and cloudy like you heck. It does not concern !!
Has taken then mine Dremel and carved out of some bubbles of air! ( I knows touches crazy mine also)
has DONE THEN the poor very thin and fast. It looks the glass and all airs the bubbles have gone!

Has has wanted as it has resulted for my first time,
He take a thing out of my description, has left the be to touch thin multiple discharges!!
5 / 5
After being motivated by a lot of video of Youtube, has decided to take to stab in art of resin and has begun was to order this product. After reading the few descriptions, @gives to the plot of frustration could be stemmed to read and that follows some directions a lot attentively. If it is for art or coating the tabletop, always does sure to:

- gloves of wear. This material taking súper sticky and will take everywhere
- do sure anything is coating is lined with paper of wax or newspaper or anything to take a resin. Once he hardens, difficult result to take!
- Always mix the 1:1 proportion and use the cup to measure. Please a lot eyeball the, otherwise does not cure properly and will remain with the tacky and sticky unfinished project ( has learnt a hard way)
- do sure is the thorough mix also! I have used it popsicle clave and has done sure that has taken some funds and some sides
- take the window has limited to do with a resin once is mixed. Has the plan for advanced that loves to fulfil
- does not concern to have bubbles. Continuous do against this window has limited, and the quickly flash of a torch of the swipe or the gun of heat will take some bubble
- has used of then mine like a project of art, has required to do sure my cloth has been elevated (with a help of cups) like resin dripped of some sides. And also he sure partorisca rub in some flanges before fully it cures.

To good sure will be to order more than this product!
5 / 5
Is clear crystal! If calm want the partorisca be the little soft, likes the hard press with your nail of the toe and he will leave the small indent then, mixes it like this says... If calm want the partorisca be hard like the rock, use so only touch more hardener that resin. Appearances to you to touch all a resin was then all a hardener. To do the calm of course finalised with more hardener been due to like fat and sticky a resin is does not think so to the resin will finalise in the mix likes hardener. If it is your first time , game with him (this touches odd lol) finds a proportion that works. Always maintain in alcohol, a hardener is much thinner, the easiest mix and does not stick to some sides of a cube to mix like a resin done. Included this in spite of, have found that mixing so only partorisca pinch more hardener mark súper hard! I have used he for the counter of cookery that has built this in spite of has the abundance has left on. It goes the long way!
5 / 5
Postpones to buy epoxy after listening histories of numerous horror and seeing any firsthand disorder ups (bubbles galore, sticky arrivals, etc...). After dipping roughly 15 discharges of polycrylic in mine slightly uneven tabletop (rasgados and stained 2x4s so you can no any sand softens) still has not been satisfied. There are 99 pieces in mine tabletop and does not love disorder up. After looking numerous video the numerous time finally has taken a nerve to try epoxy and for the first start of timer adds! A tone for me was to do sure to have equal parts of the each one and for the together mix for the plenary 5 smaller. I have used the confusion to paint of metal of clave of chevron (some these looks has the propeller in an end) and has used the wireless hammer in a lower dipping so that it do not take even more bubbles that that already has had. It has applied once I have used the gun to heat to take touched of of some bubbles. The photo has attached.
4 / 5
First time that use this mark and to good sure NOT recommending. Claims to be the clear crystal. Opened both jugs of the informative frames done an hour, has measured that has required, mixed has touched then. This separates all has been smoothly.
Has gone back to look in my project and all was the bad yellow. Some white zones of my piece, yellow now. An outside of a jug has turned yellow (run B). My mark to new silicone that mixes the short was ! I can not save my project now but calm perhaps can with this description.
Both cups of silicone in pic was the new mark. A one in a legislation still has wet resin of an hour after touching and his obviously yellow!
5 / 5
Has used this to finalise the cup of anguished forest has done for my island of cookery. I originally used urethane, but has had too many cracks & crevices and my woman said it would be too hard to maintain clean. As have lined on a surface with 220 grit sandpaper and has used epoxy to dip the good smooth surface on that. A product has covered a urethane without question at all.

Previously had used JB Weld the liquid prize epoxy with terrible results in the leading work - an arrival has turned milky likes the priest and a piece there is ruined . Any sure that has been bad like the instructions were minimum. Because of some descriptions add and the reasonable prize has decided to try that this Crystal Clears epoxy resin. Some instructions were of sound. They were very detailed with a lot of tips to take utmost results and very better that a worthless instructions that is coming with a JB Weld produced.

An arrival is @to begin very good and my woman is happy! I gave it so only 4 stars because some scratches of arrival easily. Has has used so only an island tops the few weeks and there is already scratches and scuffs, in spite of using reasonable precaution. With which have used this product there is @@give that a same company done the alike epoxy for the Cups to subject concealed is supposition to be harder. If I take too many scratches can go for another discharge of a Table Upper version to see yes is more durable.
4 / 5
Using this epoxy has built the glow in a table of caffè dark that loves! It solidifies In the pair of the days and do like this expected! It suggest to fill on holes with something more economic likes glue of forest to start with with and then beginning pouting epoxy mixed with glow in a dark powder that that can be easily deep on-line. It is not economic in a glow in a dark powder reason really done the difference.
5 / 5
The material adds. Second time ordered it. Used the in a table for my restored 1946 Logan 10x24 gone back. It is turn hanged roughly 450lbs. Any sign to break in a resin at all!
4 / 5
Has purchased some epoxy of the big woodworking tent of supply. $ 130 For resin and hardener. There is not coming with instructions so only in a backside of a boat. 2 - 1 mix, mixed two different games and both overheated, broken and bubbled terribly. It has not had good regime with him, probably more error of operator that anything. This material has been mine recommended . His half a prize, 1-1 mix like any mathematics and wine with 4 has detailed pages of instructions. With some instruction of seasoned professional and these instructions of the games that astound resulted. And know some instructions are not bad, turn cloudy when it begins to mix a two near, but with which roughly 3 minutes can see clearly to a fund of a cup. Now I so only mixed 3 ounces of the each one every time for the total 6 ounces for each layer for the total of 8 discharges, 2 fat thumbs. This material was fantastic, easy to mix and the result adds. To good sure will use in a future.
4 / 5
Have like this good to say in this product. I have done with epoxies first of this annex to be clear and has not been. Like this a lot arrive the front goes to say that ossia a product a clear plus has has not used never. I me the table of caffè out of plywood with the wise glued around a flange. My idea was to cover he in epoxy to do something some boys could eat dine on or the guest could dip his drink in and any to concern on spill them that career of a flange of a table (the liquids would be contained for a epoxied twist). The short long history, I quite decided the wing he, that guesses a quantity would require, stirring violently (all the world has said that this will cause bubbles of air), not beginning with an initial of thin discharge, and that does a whole thing indoors with the defender on while I a lot of choke in my sleep ( has liked the every day for 2 months here, and wants to take this finishing). Result perfectly. A bit epoxy goes the long way, goes in with A lot of bubbles but dried without them, and a material does not have any steam. I dry fully in 24 hours have used the reasonable quantity and no an ocean.

@@SUBJECT COMMON
has read revises in a product that is sticky and not drying never. Be SURE to touch a hardener to your cube to mix In the first place, a epoxy SEGUNDO. This has to that do with some sides of a cube that retains wet epoxy that never will solidify. I trust up this. You recommend to mix with something taped to the a lot of-taped bit of hammer and so only that uses the hammer to be able to, but has mixed manually for the pocolos small.

Has read revises of this a lot when being any 1 chevron -- both bounced to ADD Until 1 chevron.

My table is pictured. It uses still plywood subflooring, Stain of Walnut, 4 legs of pipe ('Decoration of Pipe 12FLGLEGS Table of 24 Thumbs the legs Put Complete of Industrial Steel Grey') and 5 soda-has beaten sized titled of cup ('6 Headlines of Cup Bounce Plastic RV the Car truck Inserts/to Insert the sofa of Regular Truck Inserts/Inserts Pocket of Table of the Big game Recessed'). To mix epoxy I used '20 8oz Disposable Diplomado Hoard Clear Plastic to Mix Produced, Mancha, Epoxy, Resin.'