Trending Power Spindle Sanders Products

What is Power Spindle Sanders?


Top Customer Reviews: WEN AT6535 3.5-Amp ...

Rating: 4 out of 5 with 59 ratings
5 / 5
Ossia A less expensive example of the batch of virtually identical sanders this varies partorisca paint and colour of coverage so only. A working internals is all one same. So any calm worry you on which paint your sander is, this one is a better election . And it is not bad looking! Although my plastic coverages are yellow in place of oranges. ;)

In operation, an oscillating action is smooth and a table is flat and squared to an iron. Collection of sum of laws of the powder. Some have commented that a port of the powder does not return his final of hose. Partorisca They recommend a unsung hero of connections of collection of the powder: A connector of pipe of hule adjustable. They go in a lot of measures and a stainless band clamps in each final enable you to tweak a diameter of final interior partorisca obtain the perfect access. Here it is a an I used partorisca obtain the a lot of the connection sealed , solid to the mine Festool 27mm final of hose: Fernco P1056-125 1-1/Stock of 4 Thumbs Coupling These are also easily available in any improvement of house of centre of big box. So only take some arrivals 1-1/4 and another finalises a pertinent measure partorisca resupply the returns of embrague sure on you hose. One 1-1/4 final slides on some outsides of some plásticoes sander port of powder with empty minimum and presionando a sale clamp the fact to seeds splits permanent of the yours sander.
5 / 5
Has taken this of Amazon partorisca the prize adds. Works like good like a two times a prize. Has has not received instructions in a box but WEN service of client promptly emailed complete me dipped. It scheme it is reasonably calm, very built and that it is supposes partorisca do. If your woodworking requires inside curves, calm will ask you that it calms has not done never without one. After buying some tools 'better' supposed partorisca one the majority of money, am finding that WEN tools partorisca be able to do like this well the work partorisca less than half a prize.
4 / 5
This is to build well, that need. Abundance partorisca be able to. I have bought specifically this partorisca help with the leaves of substitution of forest partorisca the bank that had deteriorated. I have comprised an image of as my rough yard has finalised after sanding partorisca form with this sander. Very excited partorisca use in of the future projects.

Has not concerned Me partorisca some options of storage partorisca some small pieces, but the stock exchange of the economic sandwich fixed that. Some descriptions say does subject partorisca presionar a die partorisca a spindels and a sandpaper the bosses that movement. I have not had any question, but has done sure a sleeve has not slipped first of working with a sander and one 3' roller. You are not a lot strong, my vacuum partorisca the collection of powder is stronger. A collection of powder was súper, has used so only the little duct tape partorisca connect my Ridgid vacuum hose. With which sanding this cedar 4 joint of the feet can not say one 80 grit sandpaper the sleeve has been spent at all, still has abundance of life.
4 / 5
Can not take a last time was this satisfied with the last-in-tool of power of the class.

Was extremely leery partorisca buy this tool. As I have progressed in mine woodworking hobby, found me frustrated and disappointed for economic, down-can of note of consumer of final tools. Often they will look a esal sews' in a tent. But calm then take them home, plants him partorisca do, and @give all a crappy committed fact partorisca achieve the point of low prize.

This WEN could be an exception that come from a principle for me. A record and the arrival is acceptable, work a lot well, and some committed is obvious and well for my work.

A table is launched iron (or some steel), any melamine like another model has considered. An arrival is the little rough - is not the glass milled smooth. So only roughly sanded with the big grit. I expect that in this point of prize - calm is not that it pays enough for any one of extra finishing. A table looks flat and quite generous in measure for my work. With the discharge of wax of paste, is smooth.

Some illustrations do not describe this, but my copy has comprised the wrench for a spindle given. Ossia The good touch .

Real sanding The operation is effective. Has quite can for my application (sanding hardwood the band has seen box). I do not have it closings or bog down, although I have left a tool a work for me.

The collection of powder is a lot effective. Has the crummy collector of powder, but still eats 99 of a start of powder of this car. I am pleased extremely in this front. The collection of powder is often an ineffective afterthought in economic sanders.

Short smoothly quite and does not vibrate around.

With a legislation grit of sandpaper, effectively can vary of fast stock scrolling to final-finalise sanding.

Some committed looks to be mainly in a front of noise. This sander howls. You cover for the listened of wear.

The hips would be well has had the place to store an extra washers. Calm suppose you can dip him behind in a spindle when you are fact , but has been well to have it cubby in a base for them - all more has one, that comprises a wrench.

Inferior line: of the which have seen, would owe pay four times so much to take more. For hobby or light professional use, can not see this disappointing.
5 / 5
My woman and I have begun recently do small boxes our spare time, and prpers found in need of the spindle sander. After doing some investigation decides that this was a way to go , and is quite happy has done.

To receive our Wen Oscillating Spindle Sander, one first what there is remarked was that it is STURDY. Has his excellent weight, and pode sand without requiring to be screwed to the surface to maintain he in bylines. There is remarked also that has the together good of spindles, more then quite a lot of measures to take to the smallest corners could do. As I have been he advances, put he spindle in the, has attached mine vacuum to a backside and shot it on, and here is that there is remarked:

A vacuum attaches it in fact does quite well. Like this far my woman has did not say me still to leave a room to dine when they are by train for the use. A spindle is good and place with a program, and there is well oscillating motion. A base has spaces to resist everything of a spindles and separates securely like this has to that no does not have to that it never concerns roughly in his loser. In a whole, this car is very dipped near, and good works.

Now a Gilipollas (yes, knows are picky)
1.) A surface of work is a bit rough. No like this rough that maintains calm of working smoothly in the, but quite rough to be the sweet annoyance. 2.) This car is STRONG, likes REALLY STRONG. In fact it can rival my table has seen. 3.) A spindle is in the slightly was location of centre, which could be a lot of problem loves sand the element he big plus, likes surface to do main is in the to side still likes vacuum outlet. 4.) (Ossia A reason loses the star) A measure A big spindle has had subjects with a sandpaper walking of boss on a spindle like this you sand. I have found the way to resist he in place (to use a small plus spindle basic) but still ossia something concealed is the defect to draw , and inconvenient.

With this description is an image of a box has done: the sides softened and squared thanks to this tool!
My woman is and my conclusion: considering cost and function, reason buy a lot another spindle sander that this?
5 / 5
This spindle sander is the option of the level of entrance adds. No like this well like some this converts the oscillating tape Sanders also, but does not allege to be.

A tool is the must has calm he frequently cut with him bandsaw of leaves such rough flanges. This has been the addition adds my tent. I still that exits a protect better for a cup, rusts if it do not think never roughly waters interior 10 feet of him.

Pros
A lot spindle elections of diameter
Good force
Solid upper

Gilipollas
the cup rusts incredible easily
Easy to on presionar spindle die
4 / 5
Ossia a awesome addition my cochera. A lot it asks a knife and self the projects of bond am doing on. It can as well as he no bog down.
5 / 5
Has bought this for the project of improvement of small house, as have has wanted an economic plus sander possible. I have bought this with low expectations, because of a prize. Any one so only he a work well, surpass expectations. Here it is pros and gilipollas:

Pros: prize

Luz and hanged portable

the engine has abundance to be able to and stable of careers with the small vibration that considers light weight.

Resupplied well of spindles, and the good creation means does the place for all the extra parts, excepts....

Gilipollas: ...Any place to maintain an extra washers of measures resupplied (small black washers east retains a spindles under a die) during use. An integrated tray or the cube would be well of calm does not want to lose these.

Measured of table and form. A bit small and uncomfortable in a front

Spindles fray quickly in hard forest.
5 / 5
Take the decent car for the very low prize. A collector to powder fact for me and a speed, can, and gearing does amiably. It is packed well and arrived in good order. My subject only with this car concerns a table. An image suggests the cup of the fat mussel but ossia so only for show. A cup is ribbed and my supposition is is in the thumb of fat neighbourhood. It has dipped the his right flange and the mine has not gone totally flat. The mine there has been the depression of roughly 0.2 mm. It conceal it is not in plot and for more than the calm tasks would not remark this class of error. Another subject with a cup is that a grinder has used to flatten was the quite coarse grit car. This could line pieces of delicate work in some chances. Finally, a cup was really dirty with some earth in by-product of production that was difficult to take. Rubbing the alcohol looked to do a trick second the one who takes an accident embedded in a table.
5 / 5
Are the luthier and when being able to do a bit mainstay of preliminary electrical guitar shaping, save me plot of time. Volume of the plot of a forest of suspenders with a spindle sander, first to install them in the electrical guitar. Still I reserve chisel and voice some cups, and behind, but has the quantity dates of forest that begin a lot of @@subject that. A sander acts efficiently and quickly.

Has has done also bridges of ebony of Gabon. Utilisation Adirondack spruce for some suspenders. It is managed both of these extremes in hardness, as well as a lot the forest goes in. A sanding bosses last the long time.

Have the small and spatial tent is in the prize. I hooked the small tent vac the sander and the maintain a lot cleaned. It is the good sander for a small tent.
4 / 5
Ossia A less expensive example of the batch of virtually identical sanders this varies partorisca paint and colour of coverage so only. A working internals is all one same. So any calm worry you on which paint your sander is, this one is a better election . And it is not bad looking! Although my plastic coverages are yellow in place of oranges. ;)

In operation, an oscillating action is smooth and a table is flat and squared to an iron. Collection of sum of laws of the powder. Some have commented that a port of the powder does not return his final of hose. Partorisca They would recommend a unsung hero of connections of collection of the powder: A connector of pipe of hule adjustable. They go in a lot of measures and a stainless band clamps in each final enable you to tweak a diameter of final interior partorisca obtain the perfect access. Here it is a an I used partorisca obtain the a lot of the connection sealed , solid to the mine Festool 27mm final of hose: Fernco P1056-125 1-1/Stock of 4 Thumbs Coupling These are also easily available in any improvement of house of centre of big box. So only take some arrivals 1-1/4 and another finalises a pertinent measure partorisca resupply the returns of embrague sure on you hose. One 1-1/4 final slides on some outsides of some plásticoes sander port of powder with empty minimum and presionando a sale clamp the fact to seeds splits permanent of the yours sander.
4 / 5
This is to build well, that need. Abundance partorisca be able to. I have bought specifically this partorisca help with the leaves of substitution of forest partorisca the bank that had deteriorated. I have comprised an image of as my rough yard has finalised after sanding partorisca form with this sander. Very excited partorisca use in of the future projects.

Has not concerned Me partorisca some options of storage partorisca some small pieces, but the stock exchange of the economic sandwich fixed that. Some descriptions say does subject partorisca presionar a die partorisca a spindels and a sandpaper the bosses that movement. I have not had any question, but has done sure a sleeve has not slipped first of working with a sander and one 3' roller. It has not been a lot strong, my vacuum partorisca the collection of powder is stronger. A collection of powder was súper, has used so only the little duct tape partorisca connect my Ridgid vacuum hose. With which sanding this cedar 4 joint of the feet can not say one 80 grit sandpaper the sleeve has been spent at all, still has abundance of life.
5 / 5
Has taken this of Amazon partorisca the prize adds. Works like good like a two times a prize. Has has not received instructions in a box but WEN service of client promptly emailed completes me dipped. It schemes it is reasonably calm, very built and that it is supposes partorisca do. If your woodworking requires inside curves, calm will ask you that it calms has not done never without one. After buying some tools 'better' supposed partorisca one the majority of money, am finding that WEN tools partorisca be able to do like this well the work partorisca less than half a prize.
5 / 5
Can not take a last time was this satisfied with the last-in-tool of power of the class.

Was extremely leery partorisca buy this tool. As I have progressed in mine woodworking hobby, found me frustrated and disappointed for economic, down-can of note of consumer of final tools. Often they will look a esal sews' in a tent. But calm then take them home, plants him partorisca do, and @give all a crappy committed fact partorisca achieve the point of low prize.

This WEN could be an exception that come from a principle for me. A record and the arrival is acceptable, work a lot well, and some committed is obvious and well for my work.

A table is launched iron (or some steel), any melamine like another model has considered. An arrival is the little rough - is not the glass milled smooth. So only roughly sanded with the big grit. I expect that in this point of prize - calm is not that it pays enough for any one of extra finishing. A table looks flat and quite generous in measure for my work. With the discharge of wax of paste, is smooth.

Some illustrations do not describe this, but my copy has comprised the wrench for a spindle given. Ossia The good touch .

Real sanding The operation is effective. Has quite can for my application (sanding hardwood the band has seen box). I do not have it that unemployed or bog down, although I have left a tool a work for me.

The collection of powder is a lot effective. Has the crummy collector of powder, but still eats 99 of a start of powder of this car. I am pleased extremely in this front. The collection of powder is often an ineffective afterthought in economic sanders.

Short smoothly quite and does not vibrate around.

With a legislation grit of sandpaper, effectively can vary of fast stock scrolling to final-finalise sanding.

Some committed looks to be mainly in a front of noise. This sander howls. You cover for the listened of wear.

The hips would be well has had the place to store an extra washers. Calm suppose you can dip him behind in a spindle when you are fact , but would have been well to have it cubby in a base for them - all more has one, that comprises a wrench.

Inferior line: of the which have seen, would owe pay four times so much to take more. For hobby or light professional use, can not see this disappointing.
5 / 5
I a lot of intarsia, these courses of what down mine sanding time. One 1st a burned on some weeks and I is returned. It has been substituted an astonishingly short time, probably before the amazon has received a turn! So only it wishes that it could find it substitution sanding the besides big drums grits.
UPDATE: it is now 9/14/2019
follows to do in of the presents familiarised for Natal 2019, and a sander once has burned further up. They are so only sanding 1/2' forest, at all hard likes oak, and at all but sanding down acute flanges. A guarantee has run was, and will be to substitute he with another mark.
5 / 5
In the first place, a good. Has the big, place, the surfaces of solid work concealed is smooth leaving material to slip on that. A front of a table is adjustable for sanding in a corner. A collection of powder is quite good. A sanding the transmission of drums was easily and there are zones of storage for both a sanding the drums and the table inserts/inserts to do for the storage has organised, something finds particularly of entity.

Now a bad: it is a lot A lot NOISY, more than another car in my tent. A spindle has the wobble which is quite noticeable with a main drum, that creates the vibration that marks that the difficult law. With which has had spent a sanding the bosses have has ordered substitutions of WEN only to find is a thumb a short plus that some drums.

Uses this to boss of knife of the profile and he extracted this adequately but because of a factor of noise has there is appealed increasingly to use files and rasps in planting for the use. Still the utilisation because it is there and are the past money has won last in the but has had I known then which knows now, would not have bought it.
5 / 5
Take the decent car for the very low prize. A collector to powder fact for me and a speed, can, and gearing does amiably. It has been packed well and arrived in good order. My subject only with this car concerns a table. An image suggests the cup of the fat mussel but ossia so only for show. A cup is ribbed and my supposition is is in the thumb of fat neighbourhood. It has dipped the his right flange and the mine has not gone totally flat. The mine there has been the depression of roughly 0.2 mm. It concealed it is not in plot and for more than the calm tasks would not remark this class of error. Another subject with a cup is that a grinder has used to flatten was the quite coarse grit car. This could line pieces of delicate work in some chances. Finally, a cup was really dirty with some earth in by-product of production that was difficult to take. Rubbing the alcohol looked to do a trick second the one who takes a grime embedded in a table.
5 / 5
UPDATE: My original description has been written in 2017. It will be 2021 in 6 days, and still is going strong. I used it today to form a heel of the with the one of electrical guitar am doing. It has eaten to plot of forest to preshape a heel and wanted to. It is cost each penny. I am thinking in upgrading to a beveling model.

Are the luthier and when being able to do a bit mainstay of preliminary electrical guitar shaping, save me plot of time. Volume of the plot of a forest of suspenders with a spindle sander, first to install them in the electrical guitar. Still I reserve chisel and voice some cups, and behind, but has the quantity dates of forest that begin a lot of @@subject that. A sander acts efficiently and quickly.

Has has done also bridges of ebony of Gabon. Utilisation Adirondack spruce for some suspenders. It is managed both of these extremes in hardness, as well as a lot the forest goes in. A sanding bosses last the long time.

Have the small and spatial tent is in the prize. I hooked the small tent vac the sander and maintains it a lot cleaned. It is the good sander for a small tent.
5 / 5
A bit those that observations- I does not think will be to require an oscillating spindle sander in the daily base, never. So much, I have ordered this unit, based in descriptions, that's that of prize. In this prize, ossia the quite very compraventa , of takings versus has paid stops. It is obviously 100 Chinese sourced. A packaging has survived, an interior of unit has been protected for upper and inferior styrofoam inserts/to insert which has on resisted well, roughly 30 ship of books hanged. In the first place it was, a collection of compulsory powder does really well! It is the 1 -1/2 OD port of thumb, like this probably will require to adapt the to anything yours the tent is dipped on stops. Has both 4 thumb and 2-1/2 thumb predominately, and the pocolos adapters, as this has not been the question. A manual of proprietary specific has to that be used with collection of powder! There is the number of questions in some descriptions roughly noise, and ossia the quite noisy unit . If has the Bosch Colt 1/4 thumb dread, has your comparison. A table is main that thought it would be, (prevail) is launched iron , a balance of a car is several types of plastic. A table is quite rough in some sides, some upper steps for smooth, was a lot dirty when I took it. The wise action, he the decent work so that the the, a spindle is squared to a table, and looks to have quite a lot of reservations of torsion to treat more sanding situations. Internally, you will find the DC permanent magnet engine, when being walks directly of the bridge of wave diode has fill directly of AC line to be able to. It suspects this crude, gross approximation by force to powering an engine contributes to plot to a noise. It is the mystery also that this has taken of some “mandates of correction of factor” to be able to, but somehow this does. Have wrestled With an idea to take some “guts” of this unit, and building the substantial plus (and the noise that suppresses) base, powering he with the much more refined DC supply to be able to. But an endeavour and spends it would take me to a territory of “compraventa so only the best sander in a first place”. Dunno, uses need this thing to plot, could do that, but right now, he one a work has taken for beautiful well, and will be the headline of the place in some leaves lateralmente otherwise. For one $ 138 bought it at the same time, was a right prize for a solution has required. This is priced less than some other comparable units, which probably has one same innards, table, etc. Forget one “on board storage of accessory”, so only dip joined several coverages in the stock exchange of lock of the zip, then dipped a stock exchange and a sanding drums and bosses in the toolbox drawer or to somewhere.
4 / 5
Ossia A awesome addition my cochera. A lot it will ask a knife and self the projects of bond am doing on. It can as well as he no bog down.
4 / 5
Like this far like this good. I have not dipped he by means of any toil still but a bit those that the small things have done is partorisca exit well. It is likely obvious, but taking another grits in the available sleeves done this better tool has adapted partorisca do finer. Unboxing Has developed an odd lock washer so only seating on forming that it has not been awesome. Upper is the bit oft' and scratches easily. I cleaned it, sprayed boeshield and waxed a cup partorisca protect. No, a washers partorisca some drums do not have the elegant yard or molded space in it partorisca return and stay. My simple and quickly fix was partorisca use an extra magnet or two lying around my tent and have any complaint. Inelegant, Sure. Fact and working? Absolutely. The time will say resists up and am happy like this far.
4 / 5
Has bought this model in place of the Grizzly/Fox of Tent/Tritan/ appoint it, mainly because of a prize and some descriptions. It was hesitant, but was a lot of felizmente surprised when it has arrived. Everything of some descriptions here are corrected in reply to level of noise, collection of powder, can - a collection of powder is surprising with the regular tent vac, but some the main drums leave bit it more powder in a table that a small plus some. Noise-wise - is not the calm car, but my tent vac is stronger likes anything. Power-wise, does not have any question sanding 3/4' hardwood, has included aggressively. An on-storage of the coverage for some accessories are add, although it would be good to be able to store a wrench and washers to somewhere. A transmission of drum was is reasonable. It has given 4 stars on accuracy because mine a table is not perfectly 90deg to a drum (but each one has bitten of 89deg), and a table is not perfectly flat, but has not gone by more than 1/64'. Still highly it recommends this car. In my tent I use this to simply finesse the curves cut in forests and in this point of prize, is an incredible value !
4 / 5
Has bought this for the project of improvement of small house, as I have loved an economic more sander possible. I have bought this with low expectations, because of a prize. It has not done so only a work well, has has surpassed expectations. Here it is pros and gilipollas:

Pros: prize

Luz and hanged portable

the engine has abundance to be able to and stable of careers with the small vibration that considers light weight.

Resupplied well of spindles, and the good creation means does the place for all the extra parts, excepts....

Gilipollas: ...Any place to maintain an extra washers of measures resupplied (small black washers east retains a spindles under a die) during use. An integrated tray or the cube would be well of calm does not want to lose these.

Measured of table and form. A bit small and uncomfortable in a front

Spindles spends quickly in hard forest.
4 / 5
My woman and I have begun recently do small boxes our spare time, and prpers found in need of the spindle sander. After doing some investigation decides that this was a way to go , and is quite happy has done.

To receive our Wen Ranging Spindle Sander, one first what there is remarked was that it is STURDY. Has his excellent weight, and pode sand without requiring to be screwed to the surface to maintain he in bylines. There is remarked also that has the together good of spindles, more then quite a lot of measures to take to the smallest corners could do. As I have been he advances, dipped the spindle in the, has attached my vacuum to a backside and shot it on, and here is that there is remarked:

A vacuum attaches it in fact does quite well. Like this far my woman has did not say me still to leave a room to dine when they are by train for the use. A spindle is good and place with a program, and there is well oscillating motion. A base has spaces to resist everything of a spindles and parts securely like this has to that no does not have to that it never concerns roughly in his loser. In a whole, this car is very dipped near, and works well.

Now a Gilipollas (yes, knows are picky)
1.) A surface of work is a bit rough. No like this rough that maintains calm of working smoothly in the, but quite rough to be the sweet annoyance. 2.) This car is STRONG, likes REALLY STRONG. In fact it can rival my table has seen. 3.) A spindle is in the slightly was location of centre, which could be a lot of problem loves sand the element the big plus, likes surface to do main is in to a same side likes vacuum outlet. 4.) (Ossia A reason has lost the star) A measure A big spindle has had subjects with a sandpaper walking of boss on a spindle like this you sand. I have found the way to resist he in place (to use a small more spindle basic) but still ossia something concealed is the defect to draw , and inconvenient.

With this description is an image of a box has done: the sides softened and squared thanks to this tool!
My woman is and my conclusion: considering cost and function, reason buy a lot another spindle sander that this?
4 / 5
Has bought this because of a prize and several descriptions. This has done well in mine first use, which is lasted roughly three minutes. Roughly three or four minutes to the mine second use of sanding some forest of cherry a lot easily, has begun for odorare something like plastic in of the llamas. Before it could take sanding, a sander so only leave, never to start with again. It is clear mine that the majority of retailers of this type of economic oscillating sander and buying of a costruttore same in Cina. Stay out of the this or a lot another ranging sander concealed looks it, but can be the different colour or can have the name of the different retailer on that. Now I will break down and spend more money to take an oscillating sander with metal, any plastic part , inner. I will be to contact WEN to see that it will do.
5 / 5
Had loved an oscillating spindle sander for the long time and treats it good to research first to select is one. Has the 1/2 HP engine and abundance to be able to, compared to a lot of competitors that there is so only 1/5 HP engines. It comes with the together full of drums of hule of different measure to return different measure sanding cylinders, has comprised also. Like the die is presionado on a cylinder, a cylinder of hule explains slightly to closely resist a sanding drum to prevent slippage. This system does a lot well. And an iron of mussel the upper surface so only speaks quality. A sander is compact, still powerful and that is feigned to do a lot well. A tool is very solid, and the firmly has planted stays without any wobble when into use.

Have a lot of hooked on the vacuum his closing because I need to find an adapter of hose of pertinent measure, as I can not judge that efficiently a vacuum will suck on all a powder. But with which use, that resists my tent vac hose afterwards to a port to powder quickly empties any powder still inside a car, as I have data little doubt that will he well.

Has built the stand consecrated with closing casters for him, so that easily I can movements around my tent when any into use. This also maintains in the comfortable working height. Later I will add drawers is it to store extra sanding tapes, etc.

Are very satisfied with this compraventa and am convinced that has done a right election. This sander there is not costing much more that knockoff competitors, and in fact cost less than some minors has has instrumented cars. Highly recommended.
4 / 5
Uses this for the electrical guitar that does / shaping. Literally I fry not living without him. Before this has had a hand-held version (also of WEN) and has done well but more have @@give he late so only has not gone quite big to the sure thickness headstock creations. Because of this limitation has bought a next step arrive (this type) and are LIKE THIS freaking happy has done. It is like this more powerful and easy to dip on / use. My only complaint is trivial - have onboard storage for a spindles and sanding sleeve, but any for a washers (to the equal that has to that be careful any to lose them). Cela Have it almost gone down to 4 stars because it looks such forget obvious, but truthfully this thing has done such the difference in mine workload that still the go to give 5 stars. Like this yeah, if you are in bouncing it the only start resemblance has built electrical guitars and is by train for the ask calm can escape you with a portable version, “yes” but calm will be to kick the short time down a street for not spending the little extra bucks in an of these stationary models. Do your future self the favour and so only take an economic plus stationary sander can resupply you in place of a laptop a.
5 / 5
Any one the bad has bitten strong and done the odd noise when winding down after the neighbour was, to to the sounds like him some the moving parts are in the bit for the join or something. A plastic organism looks very light and no very robust, but a cup of table of the looks of mould to be quite durable. These looks of units to be one same likes quota another sanders so only with the mark and the different colour stamped on him. Everything is chinese import now and unless a retailer is specifying heavier bearings or something for his units, then these are all some same and Wen has a better prize, like this yeah, also could go with them.
5 / 5
This sander act a lot very This in spite of so only like a Roll has seen a disk to centre that goes around a sanding the drum does not joint up with a table his all seat roughly 2 mm lower then an upper surface the one who this half is if your sanding small part will take in a flange sometimes pulling a work a more afterwards to a drum and sanding further has feigned then. I do not know reason WEN has the question that takes a cup of same table with some dishes of centre in a spindle sander and run has seen it his any science of rocket. It is the shame because some tools are decent and value a prize one @subjects done a tool a lot so only less attentive in the sound has drawn to do excepts also dangerous.
4 / 5
Ossia My second Wen sander, already have an oscillating tape sander, slowly of sound and very others do another. I tired me of constantly changing of a tape sander to a round some have bought like this this unit as will have both types always have been partorisca use. It has arrived today and it used it and doing mini Adirondack chairs, as I have expected is amazing taste all more do, but partorisca the better prize and with service of excellent client. If you are in a fence roughly buying is one or the different one without the doubt for a wen. For real they a product of excellent quality! For a way I country of pieces of furniture of mark partorisca the living and my tent would not be complete without Wen produced.
4 / 5
The tool adds in general, but dissapointed in a defect. A two hule smaller the drums do not return in his allotted space in a base. An external diameter of some drums rubs against a base. If it calms it does not take them never on, it would not exit easily. Also, it thinks it it would have to that have the hook or something partorisca store an extra spindle washers concealed is not when the be has used. It likes-me a storage partorisca some dishes of throat and English tone. Has the small tent, as maintaining all near is of entity of mine. Functionally, it Is the add sander and another that a storage of roller, am pleased enough with him.
4 / 5
Has done well in sanding Teak handrails to bounce it. Good quality for a prize: works of collection of the powder well, calmer that has expected, the aluminium of looks of the table but is launched iron. Any sure that the time would last low heavy use and/or abuse it but do like this expected for a situation of workshop of occasional house. Ossia A second Wen the product has bought and am happy with both for value of characteristic and prizes.
4 / 5
Today my work is restoring historical edifices in my Victorian city. In a past two years a Wen the reparation helped or substitute a lot some group, cartouches and a window of round casings in this edifice of 128 years. While he , have imagined some original carpenters sanding and shaping with rasps and chisels. It has had moments of guilt likes Wen has done fast and attentive work with small of a sweat has to that it has experienced. But the fact is a guilt any last too a lot the time has received once a dough and recognition of some owners. For two years now, this car me money without causing me to sweat. I have been buying cars for roughly 50 years. Some of his big to the equal that to 6 figure CNC subject. Like reason informs this little car? Reason admire engineering and excellent creation any to mention money again. For the simple poverty takings Forces 10 usability. Homeowner? Refinadas Of week woodworker? Tradesman? Professional craftsman. II thinks it could do well for you.
4 / 5
With which 30 years to say me that I have not required an oscillating spindle sander has bought this for the stands at night of labour edifice with multiple curves to be sanded and has finalised has done adds for this work and saved hours of hand-held work. Of then, fulfilling frequently go to a spindle sander. Changing the diameters is quickly and easy. A sander is weighed enough so that I have not had to scrape he down, although it would be easy to do like this. The collection of powder is well, the noise is down.
4 / 5
Ossia An excellent spindle sander, and for the a lot of lower prize of another touch for him, and much lower that low names of different mark. A unit has come a lot of packaged and ready to gather and use. Some instructions are clear and any work of supposition is required, I this in spite of, highly recommend hooking arrive some type of vacuum to the equal that to the plot of powder is created for sanding. I have ordered a resupplied grit container together with east and am happy has done. Using 80 grit the rough sand then 120 paralizaciones further sanding leaves the very smooth surface that brotas small or no further sanding has required. A table is a lot on in 90 terracings to a drum, and some drums are easy to change. With some drums of different measure have resupplied has found that there looked to be at least one this was able to return to a zone was sanding, and more often that no, is returned a curve has created. In general, I am pleased extremely with this unit, and actuate absolutely any question that recommends it to any one requiring this type of sander. Well value some five stars.
5 / 5
Knows is class suddenly but has received this yesterday. I know it is class suddenly of the revise but which have seen of is thinks is more than amazing for a prize was to purchase a rigid version with a tape sander in the May have listened sees Benny Conns in that a so it has been with a more economic unit reason have had already the tape sander. I pallet projects I maps of yard and all the classes of other materials like this of the turtles and I need the sand some sides and also some shaping. These produced looks to do a lot well thought it could has to that clamp he down but although stays quite sturdy in my labour bank gaze in some of some the people those who give it 1 star and unless it has been calm broken sends it behind the does not write the description because it was messed up . Box to expect takes a new a then written the description but otherwise there is at all bad with this unit for a prize neither does not know regarding the use or calm does not try to read some directions regarding the use. If any one says that it is under the power sends for a a that cost $ 400 to 8 Amp type . If calm only doing small projects. This no for commercial use, this a perfect east for a type of works of person of small type.
4 / 5
Has not used a unit still reason when I gathered it and read some instructions says that the guarantee is VOID if any one the the system of collection of the powder hooked up. It has to that that before I can use it. This information would owe that it has been with all another specks when the person is revising for compraventa. They would owe that leave know that in an end forward.
5 / 5
Right out of a box one of some drums of hule wobbled. They substituted it and now a spindle is wobbling . Has 2 another spindle sanders the delta and he craftsman and never the question for years.
5 / 5
In the first place was, can not beat the greeting of the amazon. Ordered the night of morning and the late Thursdays of Saturday rid.

Has bought this has based in a lot of some good descriptions for this particular tool and WEN in general. It has used drums in my press of hammer and he so only any a work. Any precise drum sanding that often as it does not love drop alot of money in an of these. A house and the dishes of throat are all the plásticoes with the table of iron of the mould. It looks solid, short smooth and quite calm and a port of the collection of the law of powder adds. 10 better times that drum sanding in my press of hammer. I will update this description run to any subjects with east but my initial impression is that it calms can not beat this for a prize
5 / 5
[ Description partorisca an oscillating spindle sander so only. NO partorisca a tape & spindle sander. (Amazon, Please the stop that combines the descriptions have taken.) ]

Am wanted with this car. It is solidly built, and very especially does not wobble! My only complaint is that a port of powder is slightly main that a hose in my tent vac. (But a way these things usually go in the fact would be surprised is returned.)
4 / 5
For a money, quite happy with east. Short of the table is not perfectly flat, a front is quite near, but a lot exactly 90 terracings to a spindle. The rear portion of a table is better. Short of the table was a lot rough, has used my orbital sander still soften it down and then applied Minwax wax of paste.

I really like a fact that has the port to attach my Wet Dri Vac, although I have required an adapter.

Are so only he hobbyist like this this will do for the majority of my projects. With just bit it more attention to detail, this could be perfect.
4 / 5
Are the take patternmaker (woodworker) the one who has used industrial spindle sanders partorisca on 40 years. I have been surprised and wanted with a quality of this cup of table sander. It is heavy quite that does not require to be fastened down, but quite light that I can move he for me.
Used it so only the sand any 6' holes in some hardwood that the plywood and he have done quickly and attentive work of him.
Also have it WEN press to hammer that really the taste. A quality is well.
4 / 5
Has bought this to help with all a sanding has involved to build the one of forest geared clock. It has done perfectly for hours and of the hours. They are more sensitive to noise that the majority of people, but simply uses some discharge of volume of same ear to concerts and wear in the aerial and I listen well enough after an hour of sanding to go back to a studio and modify music again. A sander looks very solid. All the turn and do a lot well. I also chosen on the 18 piece spouse resupplied of sanding bosses in 80, 120 and 240 grit. His exactly returned some drums of hule that is coming with a WEN.
5 / 5
Are so only he hobbyist. I build material partorisca around a house like some cupboards and shelf. I have required this for a red oak corbels am doing I so that it thinks that the chimney surrounds and mantle. Has all the costruttrici different of tools in my tent. DeWalt, Boss of Porter (when they were independent), vintage Craftsman, Makita, Milwaukee, Ryobi, Rigid, vintage Rockwell, Atlas of vintage, Hitachi, Delta...
There is a bit quality very good tools and this sander is the very good addition. An engine of walk directed is strong. And you have to that no bog down in the piece of forest in all the chance, unless you are trying to burn the. It is light how is easy to dip out of a way. Some dishes of throats are fat and durable, any flimsy likes more another. This sander will do it easier that build pieces of furniture to leave me the sand out of curves in of the creations. Originally I have loved a Rigid spindle/ tape sander, but has decided that it could do without an extra bulk of that an and I could save the hundred bucks still kick. Happy has chosen is one. I have taken it casualidad in this reason have not listened never of this first mark, and after seeing and it using, will consider him in of the compraventa future.
5 / 5
Tend tool done very impressive! I want to WEN produced, and this spindle sander is my addition of mine new plus to a cast. This sander is very very built, portable, still main that has been waiting for some photos. His oscillating characteristic is the definite plus , and substitution sanding the drums are easily abordables. Storage onboard a unit is a lot well for all some accessories, my only disappointment would be that it would have to that have the compartment onboard to store a washers has required for some different drums. Ossia The product adds . Fact a lot well, and pursue quietly. Highly I recommend it!
5 / 5
Has taken a sander in two days to the equal that has promised. A box stood up to ship good pressures and was in shape well when it has arrived. All some parts were there when the unpacked. First what has been dipped it sanding boss in the drum of hule and has has presionado things up. I grabbed the piece of cherry and has gone to do a bit sanding. It has done I add. Any bog down, sanded by means of a forest of cherry well. It does not take Me bad, am quite strong to jamb this piece of forest of cherry to a sander and the take. Under normal the big pressure this sander will take it. A RPM is is main that has expected but is feasible. Calm so only has to that be conscious and sand your piece consistently. The to plot of woodworking. I do not see using this newspaper but once the week or like this sure. This sander is abundance quite strong to do in a hardwood projects the precise hard........
5 / 5
Has been using this for the few days of then in that take it this week. For a prize has been surprised for a quality in shipping and managing. It was very easy to setup and instructions to follow. It is quell'has bitten heavy, but ossia the good thing reason do not owe that scrape he down. To the mine first use I also plugged in my Tent vac and has had zero powder. Yup, Included with the simple tent vac a powder port canals well to a spindle different some other frames and he sucks on a fine dust any question. I have tried also the mine regulates 4' collector of powder ( using an adapter ) and has taken a same result.
A sanding was a lot well in mine first piece. An only draw behind is that this table is not tilting, but then again can do he jig to fulfil a same thing.
Any part has been missing. All the drums of the measure and the notes have been comprised with one inserts dishes.
Ossia Prime minister of mine WEN produced and yes the start will buy more.
Like this far like this good.
4 / 5
In general, thinks that this thing is solid. It is calmer that unexpected. A packaging is before class . And it takes material quickly.
A subject main has is one inserts the coverages are not flush with surface of work. There is the counterbore (the surface recessed) that has measured .152 Deep. One measures coverages . Thickness. This leaves the .027 any that the small pieces can hang on. Felizmente, has access to the 3D printer and remade the coverages to be flush with a surface.
4 / 5
Has Had this unit partorisca to the long of the year, and I low uses very heavy. To date have a lot of state impressed. Had a pop of the tape of main walk was once, but any the one who has sockets, engine of ray, and the forward his shoulders can burst it behind on in 5 minutes or less.
5 / 5
Has four WEN produced that maintains (the band has seen, unit of leak of the air, tape sander and this spindle sander). They are the believer . My WEN the products maintain well to almost the daily use and a quality of build is well. There is plastic here and there but also the solid metal where required. This spindle sander has the table of construction and heavy metal of good quality throughout. Especially, there is storage for each alone component. Highly I recommend it and also it recommends to buy more sanding paper in 120 and 220 grit.
5 / 5
A WEN 6510T 3.5 Amp Oscillating Spindle Sander is the good value for a money. It is compact and access amiably in my bank. Changing a spindles is easy. It is calm for the sander. Much calmer that my disk/of tape sander. He the good work to take material. The desire had bought the the time along fact. Would have save a lot of hours to rid sanding outlines.
5 / 5
...As it is going back the Amazon. Spindle Was 1/16' out of square in 3'. Table sloped in of the sinister flanges and of the legislations, as well as having the diving in a centre. So only that has surprised that such basic appearances are eluding control of quality. We go to try a Triton after, of Rockler.
5 / 5
Like this far like this good. A speed of rotation is slow and the the dose does not take the a lot of the time shot but he preforms well. A sanding the drums are easy to change and some measures of different drum he easy the sand different curves. A working surface is launched and polished to do the easy the material of slide to the long of a drum. A base is composite looks durable, A vacuum the port is located in a backside that partorisca my tent is not convenient reason requires more spatial. In general a car is good comparable to much more of expensive cars.
5 / 5
Has Had this partorisca to the long of the year. The works add excepts collection of the powder but ossia adapted besides spindle sanders. I have had three wen produced and some so only a has not liked went him a Wheel has Seen. Well wen has to that two guarantee of year also. Has does not have to that the never use. They are ussally the dewalt man of tool but this sander returns a bill and saves a stock exchange. Control out of my full description on Youtube in fisherman308. Also tip my homemade stand of tool thus too much. Fisherman308
5 / 5
I supposition takes that paid for first time have dipped any pressure in the Spindle has Broken a lot he use same for 30 minutes. It is begun for some rubbishes can
5 / 5
So only unboxed my new spindle sander, and are not disappointed! Any assembly (another that that will do every time use). All the parts are there. The car has good storage for them on estacas around a perimeter of his base. Works perfectly. Little to any vibration. Sound? It is not almost like this strong like my radial has seen; any unpleasant at all. For a prize, are more than happy and look forward to a lot of hours of use!
5 / 5
Has not listened the plot in WEN produced, but like this far are not disappointed. There is to good sure at all likes in this sander, but every time turns it on laws and guess that? He sands. Ossia All can ask in this point of prize.
5 / 5
Am giving is the mid bookmark to vary reason have not taken he out of a box still and for this any one follows like this to him are to add or junk. I am building the new tent like any ready for him still. It looked in the each costruttore possible of these sanders and decided is a reason if a spindle measured, form of table, can and prize. Has a lot of sanders and a lot of projects of works. If I have chosen well, I will be the happy to camp. It controls behind in roughly 5 month and I will leave already know like this satisfies are
4 / 5
has measured of abundance of sanding bosses, for diverse zone of hard different measure the sand or create. This sander is solid fact, and does not bounce around, but suggests to ensure the to the table, or bank before use. A sleeve is is easy to change, and he;s quite calm, for the oscillating, 1/2 hp, car. I am impressed with this sander, and WEN. He on done 30 years, has purchased the WEN hand-held Roll jig has seen, and still use it. In 30 year is, any subject! It thanks this WEN

Top Customer Reviews: WEN HA5932 5-Amp ...

Rating: 4 out of 5 with 23 ratings
5 / 5
A WEN the hand-the variable speed has lined that rows spindle sander has the 5 Amp that engine would have to handle everything of calm precise. Some fields of spindle among 50 in 90 times for minute, with the adjustable speed can pose that anywhere of 1800 in 3200 RPM. A box comprises these sanding scopes (1/2 in., 3/4 In., 1 In., And 1-1/2 in.) And 3 drums of rubber (3/4 in., 1 In., And 1-1/2 in. It comprises two clamps to locate in any robust surface. A small instrument and the collection of powder is the breeze . The desire had had this a lot of mark of years, is so handy! It have looked in the different mark and in three times a prize could not justify. A first work takes was to adjust the pair maintains this was to cut far too very time.
5 / 5
The works cost to drop has to that sander. The desire could take the heavy more grit bosses. It does not take a some recommended in a page of Amazon. They are too long and many of some bosses are too many big in diameter. Finding some correct sleeves was the ache . It researches WEN 5932SPC Substitution Spindle Sanding Bosses, Resupplies Sandpaper Grits, 12 Band
5 / 5
partorisca be so only, am adding the description here.
Short and the law adds. They are happy bought it and would recommend it highly. If it was not partorisca my down the experiences would give it 5 stars.
Here is my first experience/ of description. I am maintaining he partorisca an audience to know in his voltage that estimativas so only. 1.os Starts of description here:
Be Careful. Ossia 120 car of Volts . When 2 minutes have odorato likes something is burning. Then in another minute an engine has begun partorisca smoke. I have been surprised and has verified some indications of a car and has been IMPACTED partorisca discover his 120V. The mine can is 240. It is immediately state partorisca verify a specs in here and found AT ALL ROUGHLY CAN RATEING. It has had to that verify a manual and look for a grandson to confirm my fear. An enormous disappointment. Now it has to that purchase the conversor to be able to and expect he of the still careers.
5 / 5
A Sander is fantastic and very easy the setup and use, May! A question with a Sander is finding a esplacement spindle bosses. It is by train to do me to Seat likes him the deception that buys it Of then has the question that spent or has included that tries to find Some Substitutions spindle sanding bosses.
5 / 5
A sander works and to the equal that has announced trace to the cup of bank, 2x4 screwed still bank, etc. An oscillating indication of a sander is minimum in better and would have to that have an aggregated characteristic that is disabled; this in spite of the no. does not squander yours $ in east is looking for something concealed will resupply the plot of use; this in spite of six the hobbyist and so only will use it occasionally he probably laws for you. For the projects the big plus cost the tabletop sander which is purpose built or use the drum sander in the press of hammer.
4 / 5
(Amateur woodworker) ossia a so only spindle sander has used like this can not compare to another but like this far give it a A+! Powerful ! This in spite of, a paper of sand goes QUICKLY and for a prize, can take expensive calms use he often.
But regarding a quality of a tool, highly would recommend !

Fun toy, has touched around with some pieces of forests of piece. There have it to good sure the curve to learn but is the tool adds to add to a collection.
5 / 5
Has debated roughly that goes with the Oscillating laptop sander or he stationary and am happy has been them with this sander. A first project has done on is the musical instrument and this sander has touched the ENORMOUS function takes a work done quickly. You recommend a compraventa again!
4 / 5
Is always the game to balance when you buy the tool. The calm often the use? Quell'Attentive, of confidence has to that be for some stops of precise use? This does well and no attended to require to use real often but he a work.
5 / 5
These bosses of substitution are for the bank of full measure that rows spindle sander, as him him a good value. For correct measure to rid the test has resisted:-WEN 5932SPC Substitution Spindle Sanding Bosses, Resupply Sandpaper Grits, 12 Band.
5 / 5
Use to projects of sand of small art to the equal that can be ensured to the bank. As any hand-held tool is easy to the tent was when any into use and quickly to setup when required. Also it has the vacuum port! I add to maintain an orderly tent.
4 / 5
A quality vs the prize is surprising. A port of the law of powder adds with the small tent vac. Some group to mount comprised is robust. It looks to have abundance to be able to. They are very satisfied.
5 / 5
A quality vs the prize is surprising. A port of the law of powder adds with the small tent vac. Some group partorisca mount comprised is robust. It looks partorisca have abundance partorisca be able to. They are very satisfied.
5 / 5
Like this far like this well, work well and that it is supposition partorisca do , has done projects of half dozen, 2+ hpors career of time and has had any subject except a tampon that comes free once.
4 / 5
Used it attached to my labour bank .. Surprisingly I am a lot sure and solid.. It does not have the room partorisca the upper table adds in project of pasador white..
5 / 5
My husband has used it so only the time of pair but loves it. Experience the sand down the gun racks- say it has saved easily several hours of sanding notch down manually or with the dremel.

Value he.

Has no clamped the to some hands of use of the table free, but wants to that I expect also.
4 / 5
Has required the tool to take to some difficult bits of organism of electrical guitar, without forking was for the bank spindle sander (which do not have room for). It resists this to the rovescio in my aim so that it can see exactly that am doing. Works perfectly.
5 / 5
Is surprising. Has the small tent like this goes perfect. It can a lot also!
4 / 5
This little tool is awesome, is compact but a clamp to subject the characteristic the fact an amazing spindle sander that that that can be taken to labour places.
4 / 5
LeGustado A product with an exception partorisca be unable to purchase additional sanding bosses.
4 / 5
Has been surprised that time each boss is lasted. Used gliela sand down some the Victorian rolls cut of 2x12 doug fir. One 80 grit rasgó one has seen mark a lot was. 'A sleeve'. To good sure recommend.
5 / 5
Does well spindle the little shorter that has thought but well of work. The shelves Of substitution am too long and has had to that cut to return
4 / 5
Better that has expected. The only thing is clamps no that well but was still usable
5 / 5
A WEN the hand-held variable speed that gammas spindle sander has the 5 Amp engine which would have to that manage everything of calm precise. A spindle rows among 50 to 90 times by minute, with adjustable speeds that can be dipped anywhere of 1800 to 3200 RPM. A box comprises these sanding bosses (1/2 in., 3/4 In., 1 In., And 1-1/2 in.) And 3 drums of hule (3/4 in., 1 In., And 1-1/2 in. It comprises two clamps to locate in any sturdy surface. A small rigging and the collection of powder is the breeze . The desire had had these a lot of years done, is like this handy! It have looked in the different mark and in three times a prize could do not justifying. One first work receives was to “regulate” the pair maintains this is to be cut too long.

Top Customer Reviews: Shop Fox W1831 1/2 ...

Rating: 4 out of 5 with 56 ratings
4 / 5
Since I produce enough the little has twisted pieces among another for the personnel has imagined that wants the spindle sander. Anterior in buying this particular product looked in the model sold to Touch to Transfer and read some revise in Amazon for similar products.
The inferior line was that it can not find the probably better sander in this field of prize. Also, for any supposed reason that Tends the fox was the mark of EUA , that could correct be, but result that a sander in tez in China, which are not necessarily the subject of quality, Mays.
First thing has run to preoccupy some drums of rubber. Predominantly Be been due to mostly of transfers of radio main is using a 3 drum. So that a premier an installed. Alas, I have not been able to tense a () quite a lot of nuts to take sufficient friction in a sandpaper spent. Still with very clear sanding hasten a coverage would run in a drum. Hmmm. I have tried tenser, but does not act. Using callipers, has measured a drum bulging (expansion) in upper, head office, and inferior w/ and w/or tense. The result has not been the big difference. Sandpaper The coverage has measured near of in 3 has looked for like this be costs. Other drums (2, 1.5, 1, and ) well, means a coverage would remain posed. I have measured then a hardness of rubber (durometer) of all the drums. It results that a compound of the rubber of a 3 has the main hardness has compared at all another. Also, a factor of form (cross sectional describes against. Zone of free expandable surface) of one 3 drum is the factor , resulted in relative less bulging for this drum has compared at all another. Contacted a box (WI) and agreed to to ship the new 3 drum.
BTW A proportionate tool (probably 16mm for ISO M10) was too small, only shy of 16mm.
Other things have related in drums: For some 6 measures of coverage 3, 2, 1.5, 1, , and 0.5 provides 3 washers to distribute a pressure of some nuts. Some 0.5 chairs to cover directly in a spindle w/or the drum. A washer measured (OD) is , , and . For his instruction a washer is to be used in some 3 main drums. The problem here is that this washer runs over one 1.5 sandpaper scope. I have taken immediately another washer near in 1.5. A small plus washer is to be used in a 0.5 and of the controls directly a low coverage, which think is the good and an only option since there is any drum of rubber.
Spindle: M10 Nuts That is coming with this low quality, the nut any one with the precision has touched. I substituted it immediately. Squareness spindle Against. sander Table. 89some Titles but no the hair in firm in 90 titles. It included go (how expected) after a drum is installed.
Table of dish of the mould: I have cleaned oiled surface the subject and substituted with wax of paste to take some plus of the durable oxides longer of low prevention a friction. Flatness: The right verge in the different location has aimed some wiggling. Feeler Looks of pieces in (thickness of 4 pcs paper of copy) rodeo of flatness. Regarding a form of table, after thinking that it would prefer the table of net with a spindle be in a head office to take a same support by everything means duquel use of angle he. In this model the majority of one sustains of the table is in a backside a sander, at least that it is an use of road the, with an On/Was change in me.
Well of collection of the powder: Connected relatively small tent vac to transfer of powder in backside sander. It does not leave hardly any one has seen the powder in surfaces of table. I btw used only one 3 sanding scope.
Noise: No very calm but no that strong concealed has measured me some decibels. Enough in harmony with all my others noisy tools
In general this thing that expects it to do and is the small under my expectation so that an on. 4 stars reflect one my opnion quite proportion of action of the prize. Again, it is the grave relative -side sander. That of me now am expecting for the nine 3' drum and expects these things maintain to be in poster the good quantity of hours.
May of update 2019: sander still is going strong, any subject. I use it frequently ( it has rounded only curves in 8 Adirondack chairs). The company was very useful resolving a subject has had in a principle with one 3 drum. Enough they have shipped immediately the new drum, which records w/or any problems.
5 / 5
This particular model is sold by business a lot of basses of a lot of names. It tries another sanders and find this one to be a better in a field of prize. A professional carpenter probably would want the most better model/ big, but this one does well for us carpenters of garage in that likes him in putter around. Has the black tape in puttering and this machine a trick for me. Other models in a field of the prize still has the engines the small plus, offer' field very far and is bad has built. I have possessed two another in a field of same prize. This one east a better. Some nuts on some covers of spindle tense a rubber these retreated under a sandpaper, so that any one visit and lose traction. An another has rubber very hard backings that you can not tense and develop, which layers a sandpaper tube to locate up and of a spindle.
4 / 5
I want this thing! There is the Rigid EB4424 oscillating spindle/of tape sander (the sold in HD for ~$ 200) and that is to say so better like an oscillating spindle sander. This has to go without saying thought of any tool crafted in only or the concrete task would have to do better that the tool has done to do a lot. By everything means that is to say the little machine of sake .

Pros:
~ Basically VERY SETUP. The unpack, Attaches the spindle with the sanding spent, carried he in, and beginning sanding.
~ Well of races and smooth. Visit quite the fast plus bit that a Rigid which attach in his utility in a Rigid unit
~ Very well has balanced. It was not it can adjust a spindle to balance so that the mine was almost perfect out of to a box likes him I any problem to try.
~ I amour that comes with the 3' spindle in a 2' of a Rigid. The calm could not expect, but that the extra inch each a difference... ('That is that it says!' Any one? Huh? Huh?)
~ IS surprisingly clear. Usually say it that it is the with so that the tongue with a small measure of an engine, but does not think the bank the upper unit like this NEEDS the enormous 1hp automotive. If you are bogging this spindle sander down, or is applying too much pressure (tries it taking also material too hurriedly) or would have to buy the besides free unit when being big. A clear weight means it will be easy for me the tuck this in the cupboard and maintains out of a road until really need he for an occasional project.
~ Some works of collection of the powder surprisingly well in my same test with the tiny little tent vac. I have found even so that a no apt port my small tent vac hose so that it is the 1 -1/2' port. I have used Stanley small unit:

&60;the NEXUS TAKES&62;

Stanley is the 1 -1/4' hose like the no apt snugly in a port of powder in a sander. My provisional solution was duct tape and once was sealed, included that tiny vac pulled enough air that there was hardly powder VERY PERCEIVABLE in a coverage of a sander. I am sure I once represents out of a situation of adapter and uses my collection of regular powder or shopvac above the better same law.

With:
~ A bit field of small change. That is to say class of level for this data of the bank and the upper units are essentially all a unit fashioned abroad same re-marked for each vendor, his not surprising . Only you bad will have to yours has said a sanding spent on occasionally for the spend equally.
~ A thing that slightly turbulent am done of empty cement to store all some dishes of throat, spindles, and included a wrench, but has not comprised any place to store an extra washers included for some measures of spindle smaller! I have expected that poden apt on some few spikes of spindle but alas, they Tan of no. Now stay with three small washers that necessity to do sure in not losing wants to use some small plus spindles.
~ Would have preferred a level of plus shopvac 2-1/4' port. Any one so that calm necessarily need a power for collection of effective powder, but only so that his more common and very now has to go finds an adapter. I think that that that is to say that need ?



Will update this description once discovers...

In general, that is to say the add little machine for a hobbyist woodworker! Perhaps it included a more casual professional does not find you sanding the daily curves. His sake and small as it can tuck was until in fact the require. Absolutely estimate it his five stars if it was not for a collection of port measured powder and a lack of storage for an easily stray washers! Certainly buy it his again in spite of these small flus.

UPDATE 1/17/2016:

takes the moment, but I at the end taken around to purchase this adapter and does not fulfil he very access. Shucks... It has not founding the substitution still, but has no really looked. I take a nexus to helps it the confusion reduced. It has attached also the pictures of pair of a first project I sanded with this little sweet dity! You see these patients of smooth curves in some legs...
5 / 5
State using this sander now during the months of pair. A sanding the look of coverages to line up quite well and has not had any subject with action. The majority of my sanding has been in exotic hard forest (zebrawood, bubinga, the heart lived, etc.). One beats to powder that is a subject since presses behind up through a dish to face if it does not have the void connected (has not used the void), but has not affected an use of a product. There is has not had any subjects with excessive heat. Some looks of spindle to run directly and true.
1 / 5
There is this unit these chairs in my List of Desire during the year before at the end when being able to save enough money for the purchase. Quan A unit is arrival , pose up and turned it on. Had the load 'thunk' and a spindle only transfer without change. Technology of the fox of Tent has called the support and they have said that one varying the mechanism has to has suffered harm in sending and this has required to contact Support of Client of the Amazon to take a unit has substituted. I exactly concealed and once again, the amazon was fantastic to pose in the turn and the routing was another unit,

Quan a second unit is arrival , has taking he of a box, plugged he in and turned it ALL. I have verified my cord of extension to do sure law properly, and In the adherent, ignited, the cover of follower turned, all was a lot. Plugged In a Fox of Tent again and has ALL!!! Fed up With this atrocity, the amazon contacted again where they setup the turn paid and routed join me another Spindle Sander that had been looking in when decide in the unit.

Once of the client of the amazon is EXCELLENT!!
5 / 5
I confess it it has been it disappointed a first time has used this tool-- like me enjoy the purchase of new tool for while possible, in savor an entertainment to pose in the new tool, taking it aforado in my necessities, and then using he in any project aim his acquisition. This tool has been ready to exit of a box and was so effective to do a work for concealed it had purchased the (softening bandsaw marks out of curves of interior in red oak), concealed in 10 minutes of inaugural a box, a work has been done and has looked for already the place to store this until a next project. Where it IS an entertainment in that?

In the each seriousness, that is to say the tool adds this better work this has expected. Determined to have some entertainment with him before posing was, has tried he in piece of diverse forest and has been pleased that he any one same low marsh when sanding 3' arce the thickness taken. Some adjustable nuts in a cup of a spindle the work adds that it compresses some coverages of spindle of the rubber to do sure a sandpaper the tubes have remained on. A surface of work provides abundance of spatial for my necessities. It have saved me considerable time in of the anterior projects (and probably had resulted of better final) has purchased this tool sooner-- beaten a heck out of doing the different wry sanding bloc to rid-sand an interior of the each curve.
4 / 5
That is to say the level of entrance very sander. If the form needs the small project, faiths a trick. For any class of production, is not a right tool. Very amused to operate and has the port to connect in a vacuum.
5 / 5
Like A port of powder. Enough it covers in and use. The sure desire has done heavier grit sandpaper for these even so, a rough plus can find is 60 grit and was well to have at least 40. State using he to build chairs, the rough piece with one has seen to group then softens to go with this sander in front of a random orbit and then hand-the sand has lined..... It takes the moment to take says 1/16' in the 36' piece of the new but then already knows the hours of pair in a tent that form a fund of the chair of mecer with this machine is not a lot of all this bad so yea. Good machine. Heavy table , robust, has squared. In general I the terrace and would buy again
2 / 5
While a packaging was very HAS initially thought that took the squad has used.
Negre smudges During a very cupboard quite white. A sanding the coverages of drum are poor quality seperated and unusable. But a table of dish is a main disappointment rusty and faced and very roughly with one verge these falls was quite 16 of an inch in the 5 x 1 zone.

Does not have to weaves of undertable immovable how that attaches to fence jig or the guide is unlikely.

Has been since thanks to immediately order sanding the drums are spent 2 hours that cleans a surface. I am already spent more time in interview in this thing that everything of mine another the squad has combined this year. With any luck it included I can use a machine this week. Although probably it have to it is it returned.
5 / 5
I have used he in of the a lot of projects now and taken of materials with small endeavour. Quite powerful also. It can not look for the join up but has no really tried in. It attaches of void in a retreated also looks for very quite be when attached in my system of collection of the powder. It IS solid but has holes of ray in a base to attach he in something solider which are that facts. A draw to be able in is not also bad or while I have used he out of 15 and 20amp circuits without tripping a breaker.
4 / 5
Of then I produce enough the little has has twisted run among another for the personnel has imagined that loves the spindle sander. Previously to buy this particular product looked in the model sold for Load of Port and read some revises on Amazon for alike products.
The inferior line was that it can not find the probably better sander in this row of prize. Also, for any reason has assumed that Negotiate the vixen was the mark of EUA , that could be corrected, but results that a sander in build in Cina, which is not necessarily the subject of quality, May.
First what has run to concern some drums of hule. Predominantly Been due to mostly of curves of radio main am using a 3” drum. So that a prime minister an I installed. Unfortunately, I have not been able of presionar a () given enough to take embrague sufficient in a sandpaper boss. Still with very light sanding pressure a sleeve would run on a drum. Hmmm. I have tried more presionando, but does not act . Using callipers, has measured a drum bulging (expansion) in upper, centre, and inferior w/ and w/or presionando. The result has not been the big difference. Sandpaper The sleeve has measured near to 3” for this looked to be good. Some other drums (2”, 1.5”, 1”, and ”) well, means a sleeve would remain dipped. I have measured then a hardness of hule (durometer) of all the drums. It results that a compound of the hule of a 3” has the main hardness has compared to all another. Also, a factor of form (cross sectional describes vs. Zone of free expandable surface) of one 3” drum is the factor , those results in relative less bulging thus drum has compared to all another. Contacted a box (WI) and there is agreed to to ship the new 3” drum.
BTW A tool resupplied (probably 16mm for ISO M10) was too small, so only shy of 16mm.
Other things have related the drums: For some 6 measures of boss 3”, 2”, 1.5”, 1”, ”, and 0.5” has resupplied 3 washers to distribute a pressure of a die. Some 0.5” chairs of boss directly in a spindle w/or the drum. A washer measured (OD) is ”, ”, and ”. For his instruction a ” washer is to be used in some 3 main drums. The question here is that this washer “runs over one 1.5” sandpaper boss. I have taken immediately another washer near of 1.5”. A small plus washer is to be used in a 0.5” and of the controls directly a sleeve down, which think is good and an only option of then there is any drum of hule.
Spindle: M10 Since it is coming with this low quality , the edge any with the accuracy has touched. I substituted it immediately. Squareness spindle Vs. sander Table. 89Some terracings but no the hair closes to 90 terracings. It has included you go (as expected) after a drum is installed.
Table of iron of the mould: I have cleaned oiled surface of table and substituted with wax of paste to take some the plus along durable rusts more than low prevention a embrague. Flatness: The right flange in different location has aimed some wiggling. Feeler I pieces Resembles (thickness of 4 pcs paper of copy) rodeo of flatness. Regarding a form of table, after thinking that it would prefer the table of round with a spindle be in a centre to take a same support to all the cost of the like the corner uses it. In this model the majority of a support of table is in a backside of a sander, at least ossia a way uses it, with an on/Was transmission to me.
Well of collection of the powder: Connected relatively small tent vac to port of powder in backside of sander. It has not left hardly any one saw powder on surface of table. I btw used so only one 3” sanding boss.
Noise: No really calm but no the strong that measured me some decibels. Enough in harmony with all mine other noisy tools 😊
In general this thing that the appearance to do and is the little under my expectation because an on. 4 star reflects one my opnion roughly proportion of action of the prize. Again, it is the relative low-side sander. As of me now they are while to the new 3' drum and expect these things maintains to be announces the good quantity of hours.
May of update 2019: sander still is going strong, any subject. I use it frequently ( there is rounded only twist on 8 Adirondack chairs). The company was a lot of gain solving a subject has had in a start with one 3” drum. Enough it has shipped it immediately the new drum, which w/or any questions.
4 / 5
This particular model is sold for a lot of companies under a lot of names. I have tried another sanders and find this one to be a better in a row of prize. A professional carpenter probably would love the elder/of better model, but this one does well for us carpenters of cocheras to to which likes to putter around. Has the black tape in puttering and this car a trick for me. Other models in a row of the prize still has the smallest engines, ladies' row a lot far and is bad engineered. I have possessed two another in a row of same prize. This one east a better. A die on a spindle leave presionar a hule that the drop has retreated a sandpaper, so that it does not turn and lose traction. Some another has hule very hard backings that you can not presionar and develop, which leaves a sandpaper tube to locate up and of a spindle.
4 / 5
Has been using this sander now for the months of pair. A sanding the look of sleeve to resist on enough well and has not had any @subject with action. The majority of mine sanding has been in exotic hard forest (zebrawood, bubinga, the heart has lived, etc.). A powder can be a @@subject of then presses behind up by means of a dish to face if you do not have the vacuum connected (has not used the vacuum), but has not affected an use of a product. I have not had any one subjects with excessive heat. A spindle looks to run directly and true.
5 / 5
Love this thing! I have had the Rigid EB4424 oscillating tape/spindle sander (the sold in HD for -$ 200) and ossia so better like an oscillating spindle sander. This would have to that go without saying thought of any tool tailored to so only one the concrete task would have to that treat better that the tool has done to do a lot of. To all the cost ossia to well little car.

Pros:
- Basically A lot of SETUP. The unpack, Attach the spindle with the sanding boss, discharges he in, and beginning sanding.
- The good and smooth careers. Quite turned bit it faster that a Rigid to the equal that adds his utility in a Rigid a.
- A lot has very balanced. It was not it can regulate a spindle to balance reason the mine was almost perfect out of a box as I have not annoyed trying.
- I amour that comes with the 3' spindle in a 2' of a Rigid. Calm could do not expecting, but that the extra thumb all a difference... ('This is which say!' Any one? Huh? Huh?)
- Is surprisingly light. Usually say it conceal is the with reason speaks to a small measure of an engine, but does not think the bank the upper unit like this NEEDS the enormous 1hp engine. If you are bogging this spindle sander down, neither is applying too much pressure (that tries to take too material too quickly) or would have to that buy the free big plus when being unit. A light weight means it will be easy for me to tuck this to the cupboard and maintain he out of a way until I really precise for an occasional project.
- Some works of collection of the powder surprisingly well in my same test with the tiny little tent vac. I have found this in spite of that a port is not returned my small tent vac hose reason is the 1 -1/2' port. I have used Stanley small unit:

&60; LINK TAKE&62;

Stanley is the 1 -1/4' hose as it does not return snugly inside a port of powder in a sander. My provisional solution was duct tape and once has been sealed, included that tiny vac there is pulled enough air that there was hardly A lot noticeable powder in a coverage of a sander. They are sure once I figure out of a situation of adapter and use my collection of regular powder or shopvac on treating included better.

With:
- A little row of small transmission. Ossia Class to regulate for this date of bank and the upper units are essentially all a unit has manufactured abroad same king-branded for each vendor, his not surprising . Calm so only mean you will owe toe a sanding boss on occasionally for the spend equally.
- A thing that annoyed slightly is has done spaces concretise to store all some pocolos flat of throat, spindles, and included a wrench, but has not comprised any place to store an extra washers has comprised for a small plus spindle measures! I have expected that poden returned on a bit spindle spikes but alas, his no. So that I maintaining rest with three small washers that requires to do sure to not losing wants to use a small plus spindles.
- I would have preferred a plus rule shopvac 2-1/4' port. Any calm reason necessarily need a power for collection of effective powder, but so only reason his more common and does not have to that now go to find an adapter. I think that that ossia that need?



Will update this description I once discovers...

In general, ossia the add little car for a hobbyist woodworker! Perhaps included a more random professional does not find you sanding the daily curves. His well and small to the equal that can tuck was until calm in fact require it. Absolutely estimate it five stars if it was not for a collection of port measured powder and a lack of the storage for one has lost easily washers! Certainly buy it again in spite of these small flus.

UPDATE 1/17/2016:

take the moment, but I finally taken around to purchase quell'adapter and calm does not know he no returned. Shucks... Has not founding the substitution still, but have any really look. Have take one links to the help reduces confusion. I have added also the pictures of pair of a first project I sanded with this sweet little dity! See these patients of smooth curves in some legs...
5 / 5
Confesses has been disappointed some first time have used this tool-- I likes to enjoy compraventa of new tool for while possible, to savor an entertainment to dip on the new tool, taking it aforado to my needs, and then using it on any one projects has aimed his acquisition. This tool has been ready to exit of a box and was like this effective to do a work so that it have purchased the (softening bandsaw frames out of curves of interior in red oak), quell'inner 10 minutes of inaugural a box, a work has been done and already has looked for the place to store this until a next project. Where it is an entertainment in that?

In all serious, ossia the tool adds that extracted better that has expected. Determined to have some entertainment with him before the place was, tried it on diverse piece of forest and has been pleased that he no bog down included when sanding 3' arce hard thickness. An adjustable die in a cup of a spindle has done the work adds that it compresses a hule spindle sleeve to do sure a sandpaper the tubes am remained on. A surface of work resupplies abundance of spatial for my needs. It have saved me considerable time in of the leading projects (and there has been probably resulted of better final) has purchased this tool sooner-- beaten a heck out of doing the different wry sanding blockade to rid-sand an interior of the each curve.
5 / 5
Has had this unit that chairs in my Cast of Desire for the year before finally when being able to save enough money for the cost. When A unit has arrived , dipped that on and turned it on. Had the load 'thunk' and a spindle only transfer without transmission. Technology of the vixen of Tent has called lean it and they have said that an oscillating mechanism has to that it has suffered harm in shipment and that has required to contact Support of Client of the Amazon to take a unit has substituted. I exactly concealed and once again, to the amazon was fantastic setting on the turn and sending me was another unit,

When a second unit has arrived , has taken he out of a box, plugged he in and turned it . I have verified my cord of extension to do sure does correctly, and he in the defender, has turned on, the leaf of defender has turned, all was a lot. Plugged In a Vixen of Tent again and has turned !!! Fed up With this atrocity, has contacted Amazon again where his setup the turn paid and sent another Spindle Sander that had been looking in when deciding in the unit.

Once the service of Client is EXCELLENT!!
5 / 5
Does not think really can justify mark this down the star because the law adds. I used it so much of then taking it and the desire had bought the most collected.

An only negative is not having never @@give uses the engine of paintbrush. I guess it conceal it was for a power required for a sanding. For this reason, is quell'has bitten noisy - a lot as much as the circulate has seen, but still bit it noisy. Another note, has thought of the place to store all, included a wrench has used for presionar a spindle given --- Except one to spare washers to use on a different sized drums. There is any place to store those, which are in the big risk to be has lost. I think that that I will attach the small magnetic tray or something looked to resist them.
4 / 5
Like a port of powder. Enough it covers in and use. The sure desire has more heavy fact grit sandpaper for these this in spite of, a rough plus can find is 60 grit and was well to have at least 40. I have been using he to build chairs, the rough yard with a band has then seen the soften was with this sander first of a random orbit and then hand-held sand..... It takes the moment to take says 1/16' in the 36' piece of walnut but then already know the hours of pair in a tent shaping a fund of the chair of mecer with this car is not really all this bad likes yea. Good car. Heavy, sturdy, square table. In general I the terrace and would buy again
5 / 5
while a packaging was a lot initially Has to that think that has received the crew has used.
Black smudges during an a lot of quite white cupboard. A sanding the bosses of drum are poor quality seperated and unusable. But a table of iron is a main disappointment rusty and faced and no true with a flange that the falls was roughly 16th of a thumb in the 5 x 1 zone.

Does not have to that it weaves of undertable the urban nails so that it attaches to fence jig or drives are unlikely .

Has been of then forced to immediately orders sanding the drums am spent 2 hours that cleaned a surface. I am spent already more time on interview in this thing that all of the mine another crew has combined this year. With a bit of regime included can use a car this week. Although probably it was necessary return it.
4 / 5
Experience the sand stirs it of inside curves in the together of of forest (oak) bending the chairs am doing. Abundance to be able to and a variety of drums is handy entrance. Only complaint (much smaller) is that there is any place to store an extra washers east compresses some drums when you are not that they use that it measures.
4 / 5
Ossia The level of entrance a lot of sander. If I need to form the small project, a trick. Partorisca Any class of production, is not a right tool. Very fun partorisca operate and has the port to connect to the vacuum.
5 / 5
Used it on a lot projects now and take of material with small endeavour. Quite powerful also. It can not look for the join up but has no really tried. Vacuum Annex in a backside also looks to be quite well when semi-detached to my system of collection of the powder. It is solid but has holes of ray in a base to attach it to something solider which is that it has done it. A draw to be able to is not too bad neither to the equal that have used he out of 15 and 20amp circuits without tripping a breaker.
5 / 5
Avenges a lot of packaged with good instruction. The table is quite flat and perpendicular (inside acceptable tolerance ) to a spindle. It looks that it is for the use to owe light how is WELL for the majority of woodworkers (and for a prize). A base is done of plastic. This in spite of, is the very good value for a money. A vertical shot is so only 5/8'. Also, a main part (the run the big) of a table is in an opposite side of a transmission. Also, a collector of powder could be the most common measure (2 1/2 thumb more than 1.5') and require to look for an adapter that is not easy to find more paid that $ 10. Ossia My reason to give so only 4 stars.
4 / 5
Not being able to on when it arrives. Person of the technology contacted in Woodstock, the one who instantly has known a question: the paintbrushes of engine have required uninstalling and king-installing, the simple 8 min extracted (that it can require it do in all the chance after prolonged use.) Sturdy Car, work well, has variety of spindle measures. BTW, does not expect perfection of cars that has a lot of moving parts, is done far was and the long distances have shipped. I expect service of good client to solve questions, and has taken of Woodstock. Look fwd to use he for the long time.
5 / 5
Could not be happier with this sander. It touches crazy but work as well as my buddy big Grizzly model to walk but with the smallest table a lot of. I can not imagine requiring more sanding more than being able to is quite light to dip was when any into use. Utilisation for edifice of electrical guitar and the arce hard no quell'retards down. It is the saver of enormous time . I will mention that this one has come so only with a place of coarse sanding sleeves the difference of another reviewers has declared. You can it wants to take the together of final.
4 / 5
The car adds for sanding curves stagnate.
Point of value and good prize for your money.
The plastic base can be aim it lean in a department of durability but imagine is to maintain a cost down.
Is some it strong plus that thought it would have to that be.
5 / 5
Easy to dip on, the instructions are clear and some works of good product. I expect that hard.
5 / 5
This sum of laws of the what. So only that looked for and in the good prize. It takes some much more sanding grits. Well the solid and doesnt shoes around in my very unstable table.
5 / 5
Have the quite big forest tent but not having @@give as it has required a oscilsting drum sander until I took it, the tool Adds !
4 / 5
This Vixen of Tent Spindle Sander has done well for a prime minister two or three month, then a spindle has begun to come lean loose to resist and finally fails entirely after so only 6 months of occasional use. Some looks of question to be a long use of plastic in a construction of a sander --no only an organism, but he down-the structure.

With which so only the pocolos use a fund of a spindle has come free of a subordinated carrier that resists that it causes the wobble and sever vibration in a unit; quickly in the hablador to self-destruct. I have tried use even epoxy to fasten an upper carrier that resists to an iron, but has not been achieved to save a unit; it is now entirely junk. They are very unhappy with cost of mine.
5 / 5
Used the two times the flanges of sand of skin holsters. It has done well partorisca the pocolos small, there is remarked a suction of a vacuum has hampered a power in the each upstroke. Imagined was the simple piece and I have taken that have paid stops. Used he partorisca a third time today and inside the minute an engine has burst. Rubbish.

Would not recommend this to any one.
Now looking for better quality reason his slightly in Amazons 30 turn of police of day.
5 / 5
Powerful powder , adds collection, calm, light, better that has expected. Usually, spent so only a better: Mafell, Festool, Woodpecker, there was Mentido-Nielsen, etc. has taken the casualidad is and has been pleasantly has surprised. This tool possibly can open some doors to other tools of Vixen of the Tent.
5 / 5
Has received this sander the Wednesday a 4th, and when I plugged he in, at all is spent. It does not know the one who a question was but the amazon was utmost with a transmission and when being the first member, the new one has been sent was the Thursday a 5th and had arrived the Monday , one 9th. This unit is solidly built and a table of the iron of the mould is the good base partorisca resist pieces of work. An only with can say is that an engine is a bit strong.
5 / 5
If any already the an oscillating spindle sander, this quickly will result one of your favourite tools. It chews by means of forest in the haste when shaping something, but have the amazing quantity of control and can do the work detailed relatively with him also. If calm already the, then say that ossia the value adds partorisca a prize. Calm 'can' bog the down if really you sustain his, but any that. In the 1 3/4 thumb jointed of poplar (hard forest, much harder that pasador that it is the one who the majority of 2x4 is is done of), 1 feet long and 1 wide foot, would have to be able to take 1/2 thumb out of the side (with a grain) in roughly 5 minutes, any question, without pulling a car. Any fast plus and can begin the bog an engine. A very machined the surface of work mean will take well 90 corners of terracing. Of course, you can resist your piece of work in a yes required corner (so only hang in tight).

Has been using he partorisca do organism of electrical guitar, and want it. Things that used to take me more than an hour now can be done downwards 5 minutes. To change spindles and/or the grains can go of the 'rasp' to take big quantities of forests to the 'file of nail' to take the good smooth arrival that not even can require any hand-sanding if you are careful.

A thing to verify grieves taken he out of a box is to do sure some transfers of engine on and works smoothly. A prime minister an I has taken has had some subjects with an engine (intermittent start and prendiendo). Still it takes 5 stars because the amazon shipped another immediately and envoy out of UPS to choose on a bad a, everything inside 2 days, doing me entirely whole and satisfied. Some works of substitution like the charm and has seen already a lot of hours of use without subjects.

In this prize, ossia the subject adds . Another there is complained in a spindle the travesía that is too short. I am not sure reason think that, but work perfectly for me. If a 'founded of a sleeve takes gummed on, can toe he on, and use an abrasive cleaner takes to the clean when both ends are gummed (which highly recommends, look for them on Amazon also).
4 / 5
Adds sander, good prize, work well. They are very happy with him like this far and very pleased with a quality of this car. It is light, but still has the very heavy table cup, the storage in a base are adds to maintain the parts close for and has the collector of powder exhausts in a backside so that they choose to hook until the vacuum system. I recommend this sander to any one.
5 / 5
Has used this for awhile now and have a lot of state pleased with him. Volume consistently good action and has quite can to do all that has launched in him like this far.

Has used this was and on for awhile now this in spite of extracted like new.
5 / 5
First time turned it on smell like a burned engine, any sure if this goes to last.
4 / 5
Ossia The really a lot of sander. If it was the nitpick to to an only thing does not like is of some plastic coverages, would love stainless or brass some this level until a better working surface but this would drive a prize on has bitten it. Utilisation for organism of electrical guitar, collars and a lot of other projects of forests. Value each penny.
5 / 5
Has required the spindle sander for my knife that does hobby. It likes- one table of iron of the mould and a fact that comes with all a sanding drums. An engine is very smooth and calm. Has the very small work zone, as I owe that stimulate some varied tools to be able to I use until my bank likes extracted some different operations have required to produce the knife (hastens of hammer, 4' tape sander, the band has seen, grinder of bank, etc.). This spindle sander is light, still very stable into use. This unit a work for me. Highly recommended!
5 / 5
Poor quality, has had to that return a prime minister a reason an engine has on frozen, Any happy with this element
5 / 5
the work adds. Mina has had for the year and have any subject.
Are a worker of the occasional forest and this car is more than could expect.
The good work and a vacuum utmost of laws of the connection.
Highly recommended.
5 / 5
Ossia A strong little car. A creation is pertinent. There is certainly very a lot to give praise roughly. Work well and rows in the 1/2'.
5 / 5
Has bought this reason there is significantly more can that a a sold of Load of Port. It runs a lot of smoothly and the work adds.
5 / 5
The shot adds the folds of fast nave boxed used quell'some very well do can it very so that I am using stops. The storage adds for all some drums and disk of spacer very happy with this sander
5 / 5
A prime minister two has not done and has been sent behind without question with amazon. Disappointed has has had to that the be substituted two times before it does. This was the present and has been still to embarrass in an initial of poor quality. A recipient has said a third tries was a lot.
5 / 5
Unit of mark sander not being able to up. Take an inferior dish and has followed a troubleshooting no in a manual. Used the metre of volt to verify that I have had 110V DC exiting of a bridge rectifies to an engine, but an engine would not turn . It takes some paintbrushes. One has been stuck. Pressed in the until it bursts free, he then behind and advances to do sure remains free. Rey-has Inserted some paintbrushes and sander can up. Much calmer that has expected.
5 / 5
Addition a lot well my woodshop. Short to have that has weighed. Powerful. You recommend this sander to any one.
4 / 5
A service of table tends partorisca purchase rust which is hard to take. It is underpowered.
4 / 5
Can forest of his and the calm jam any he prenderá although calm really has to that no that. This sander comes with all some necessary measures and some orderly places partorisca store some separates well in a base. Works like the charm.
4 / 5
Is the little noisy but pursue like the field. To spare torsion partorisca your half woodworking projects.
4 / 5
Dulce little unit. I go partorisca save hours of sanding manually. Ready partorisca gone well out of a box. Some people there is complained on an exhausts port - any question, undermined by means of my box partorisca plumb parts and clamped in the 1 1/4 to 1 1/2 fernco, now returns my little tent vac - well.
5 / 5
Ossia The tool adds . I am using he in of the ways that has not expected. The law adds partorisca stress tools.
4 / 5
In the first place one had died on arrival. The amazon has shipped quickly the substitution. The substitution also had died on arrival.
Has contacted manufacturer. The support of technology has declared to be the known question with an engine and that some paintbrushes of engine any good contact.
Other appearances of a sander looked partorisca be GOOD. The measure and the weight were so only in perfect partorisca the upper bank spindle sander and avenges with the good selection of diameters of drum.
5 / 5
Has had this partorisca the week or so much and used it on the pair of projects. He so that he he far well and has had a lot of @@subject. Some dishes and the drums are easy to exchange in and era. A duct works of collection a lot of hooked until the tent vac.
4 / 5
Uses a heck out of the this to build traditional bonds. Works like the field and very easy to change out of a spindles.
4 / 5
Do bowls and other elements that really require the surface of round. Sanding The small elements is hard also, as this has helped the plot.

Top Customer Reviews: VFD 220V 1.5KW 2hp ...

Rating: 4 out of 5 with 44 ratings
4 / 5
I have used roughly 100 of these VFDs on 5 years. Roughly 20 - 25 he no right out of a box. THIS In spite of, those that do work, work quite well and so only 1 the fault of one 100 or like this after when be dipped to service. AS they do except the sound that frustrates to take the dud right exited of a box.
5 / 5
This was easy the setup and the work adds. I have it on the Bridgeport J pulley of any of the boss 1hp mill. The works add and highly recommends. I wired An engine heads to a VFD, and has used a transmission of original barrel likes I/Or signal for Advance and Reverse wire fence to a VFD gone in. I have used the no-has melted disconnect to the equal that changes main for one 220 1ph the power that goes in. The works add and easy to program.
5 / 5
Originally has bought the economic plus knockoff of this VFD and this was so only the headache. This VFD was simple to program and a manual was easier that comprise. Besides, there is useful information during an internet and Youtube to help program this. This runs mine 5HP 3 table of phase has seen with subjects of zeros.
5 / 5
Ossia The quite solid inverter like this far to run the mine goes back three phases out of alone phase 240 volt. I have had to take the seven and the horsepower vfd so that it could run the 3 horsepower gone back. This walk still can not begin an engine in big speed without the 12 according to time of ramp. This costruttore overrates his Walk for at least half to two-third. No the bad buy for a money, so only does sure you grotesquely oversize a walk thinks that that you go to require for your application to be of confidence. There is the just quantity of support for these walks in a interweb, but a lot some popular CNC the forums have forbidden his discussion like the subject, reason so the people have had bad regime with them. I owe that have one this is to be build in the morning of Tuesday because this one looks the hum right to the long of and has lived the quite long life in my tent of welding. These careers of particular device in Grain State welding LLC in Derbi Kansas and is installed in the three-horsepower 15x60 gone back.
5 / 5
Almost the good product. I have had a 3kw version, connected it mine 3hp mill, dipped on some parameters of the basic engine and he have done like the charm. But it has had them 2 subjects. These are not setup to use the resistor of breaking (apparently precise asks that some components be installed). And it has had them some subjects to take torsion vectoring acting, although I have not tried a lot last after a frustration to try to imagine has gone by that my brake no
5 / 5
has contacted this vendor that asks assistance in diagnosing fault of a spindle in mine CNC subject. Using his idea, has concluded a VFD has failed. As my system was so only out of guarantee, has offered discount it generous in the substitution.

Are happy to inform that my car is to look and that careers with minima downtime while parts of reparation.

Once again gives the graces for your service of good client.
5 / 5
This has been wired for the professional. He never powered any devices, was simply powered on. It has failed interior 30 minutes while cycling by means of settings. Strong pop, and has launched a breaker. A piece of some joints of circuit looks for having exploded. Installed after a window of turn, as my loss. Chinese of the control of poor quality has done junk.
5 / 5
Has purchased this together with the 400Hz waters-cooled spindle. It looks very done and extracted well. It has given so only 4 stars because a manual is confusing and there is not any reference to any contacts of support. Be prepared to spend some time on Youtube and CNC forums to learn like this to dip some diverse parameters. A manual is quite complete, but hard to read; a translation of Chinese to English leaves something to be wished.
For example, has had all doing except a control of the speed of poster sends it @@the @knob has not done. It results that Parameter 002 has to that be place to '1'. '0' it Means that a speed is dipped with an on/down signal, which some manual calls a 'near of operator'.
5 / 5
A product is one wrong a. Very unhappy with him and a service! Tried several times to speak with the representative but all the cul-de-sacs . A new inverter has some same numbers like old inverter but no any better that of the old a. It would like to speak to the technology. Roughly to give up and find another source. Thank you. 325-513-3032
5 / 5
Powering The 3 hp 3 phase 50 hz engine in the conditioner of map. The sum of laws of the unit. The book of instruction is horrendous. They are in no way an electrical engineer, but could be improved. Some stays of units on until a breaker is enclosed was or install the transmission of double pole among a breaker and vfd.
5 / 5
I produce it adds. They are powering was it of the 1950 that car of mills. Wiring The installation was directly advances. A setting of the frequency of the factory was way too big. I have changed all some settings of frequency to 60 Hz and everything are adds. PD003, PD004, PD005 Was a culprit. It does not look a video in hooking on beginning and far transmissions that do transmissions unless you want to has to that go to change them behind. A manual of instruction has the section in some settings of parameter that is good and was quite to imagine was where a question was.
4 / 5
Adds VFD in the prize adds. Ossia A genuine Huanyang, there is knockoffs there and is inferior as it shows was for the most economic prizes. The only question has had was a coverage peeled of a keypad, but a vendor is sending the substitution.

Update: so only I owe that add that a subject with a coverage of keypad has been solved, without taking to the details so only will say that I have gone to good sure on and further. I am impressed highly with his service of client!
4 / 5
This vfd is hooked until mine 4hp 79.ºn Tape of metal sander. I do not have 3 phase and ossia to convert to 3 phase to run my car. His no very hard to imagine out of a programming. If you are not sure it does not blame some instructions because they are clear. Ossia My second an and I have another on commanded. Ossia That well law
4 / 5
am really happy with this little vfd. Have Never messed with one of these, before, but was súper easy to take hooked on and to program. Mina 3phase has seen now has soft start! Totally value of the money!
5 / 5
Has used this in my manual milling had imagined out of that required to be imputed was my second compraventa likes the prime minister a shorted was reason have been of of reverse to first without leaving a slow engine down deception
5 / 5
the work adds. A manual of user is in English and comprised in a box. A manual of user is quite easy to read and how is some diagrams to wire . Some of some explanations are not very clear like calm suggest you google 'Huangyang VFD has dipped on' for more information, ossia that has done together with reading a manual of the users and all have done perfectly.
5 / 5
Has purchased this product Seven. 23, 2019. Installed the on 3 phase 5hp compressor of air in my cochera that the typical uses residential alone phase! It is priced abordable if and far is the most economic option that has 3 phase has run in your house. They are the technician of industrial interview like this setup was easy for me but would not be hard for any concealed law to comprise ins and out of tram troubleshooting and VFDs. I run a compressor daily and this VFD shows any sign to give up and has done any harm to compressor electrical component. It will update the yes run description to subjects or of the future questions.
5 / 5
I remotely locates a dish of face, and has used a boss of extension to a controller. Works well, but a bit puzzled in a RPM readout.
Driving the 400 Hz engine in 400Hz, a readout the shows on means one has has expected/estimated RPM... There is not dipping still the tachometer in a system to verify real speed.
4 / 5
Like this far is running like the field. I have possessed the 110v a like this dipping east an up was the little easier this time. Youtube Has the plot of drive on dipping these up helps precise.
One a thing that really irks me roughly these is there is not an on/was to change you has to that unplug he for the turn was or like me wired the his transmission so much could turns on/has been without that has to that unplug.
4 / 5
Has found once the tube for place-arrive and the programming has not had any question. Has has had to that he three times, until it has taken a hangs to dip and saving a first parameter to go in to a prójimo a. You pursue mine 3 hp Kingston Bridgeport-mill of clone without question. The fresh and calm careers, although you can listen a defender to cool that careers, but concealed to agree me for the neighbour down when fact.
5 / 5
Your browser does not sustain HTML5 video. Works as it has announced. Googled Regarding the dipped up and has looked the little video.. Has my transmission partorisca mill that runs this vfd in foward and reverse rotation.
4 / 5
A VFD well is looking and the law adds. A manual takes the minute partorisca imagine was. If it purchase this element, would look in the pair youtube video on regarding the dipped up prime to submerge his.
4 / 5
A lot of inverter, takes this require a inverter partorisca normal 3 engine partorisca synchronise variable speed. Good quality partorisca of the money.
4 / 5
Has added VFD to an old 3 mill of phase of Curve Of the sud. Works and utmost value well, will update description when jog/tach the poster is finalised
4 / 5
Ossia my second compraventa of a Huangyang VFD controller of engine.

So much is installed and treating perfectly.

An excellent product in the prize that simply has not beaten can be.
5 / 5
Produced excellent, a lot adjustable. The subject only was a poor translation of the bad instruction booklet written. Another that that, cut mine a hp goes back of curve Of the sud so only well.
4 / 5
An instruction has not been very clear but once hooked on correctly laws like the charm and a prize is reasonable.
4 / 5
The vendor adds. Fast delivery. VFD Was exactly like this described and the law adds. Appreciated coming he with a manual and good information on besieges roughly configuring it. I have not installed never the VFD but the vendor has done a simple process. To good sure would recommend him to any one looking for a.
5 / 5
There is alot of parameters in the VFD. If you are not familiarised, can be confuse. I skyped a mfr the one who has dipped his skype allocution in a listing of Amazon. It has answered and I helped dipped all some parameters partorisca take my engine that careers perfectly. It could not have imagined this was without them. It gives the graces for a good service.
4 / 5
On all was the good product partorisca a prize. My main complaint is a dial partorisca regulate is very sensitive like the fact last the dial and frequency esatta. Initial setup has had some difficulties with some connections and incongruences with some instructions. With some test and the error was able to connect my go back properly to a VFD and things like this far is doing well.
4 / 5
I have used USA 220V partorisca run to 3 phase spindle and has turned a vfd on/was and accelerate controlled of the computer. The product does a lot well. The company was a lot of responsive the questions.
4 / 5
Like this far, this has done perfectly. Has had installed partorisca the weeks of pair that run a compressor of air. I wired In a transmission of pressure partorisca control on/was and dip a frequency partorisca begin to match my bomb RPM like the proportion of an engine rpm and conversion of pulley. It is good to have the 3 engine of phase partorisca a reliability while so only that is gone in of alone phase. I add partorisca buy for an application.
5 / 5
Absolutely value of the money! It saves in that has to that buy engines of alone phase.
4 / 5
This has done like this feigned but some connections of ray were very small. One 3 hp the engine requires 12 gauge boss and does not have any way to still 12 gauge down some rays in this unit.
4 / 5
Has bought 2 5hp Walks partorisca convert 220v alone phase to 220v three phase and have control of speed partorisca the 3hp Milling car and he 3hp Gone back. Some Walks law well but some manual needs some work. Youtube has answered a lot of my questions.
4 / 5
Workes In my cars uses it on 3 different some the mill the hammer and the bilt sander. His a lot of the littel in hp but do a lot on everything of them. The place covers it on exited partorisca change them fast and has had any question. Has some controls in the stand and move it around.
5 / 5
Does not do and one of the that included give you 30 days partorisca return!! Waste of money!!
5 / 5
Using a walk to power my bridgeport mill. The Able to do so more but is the good way to power of mine 3 engine partorisca synchronise cheaply. It is calm in the engine of @@@1970s.
5 / 5
Likes. It has dipped he until running my go back of engine in my house of cochera
4 / 5
Addition this mine 2hp 2” X 72” tape grinder. Very pleased with a quality and a adjustability. To good sure would buy again!!!!
4 / 5
Originally Purchase the model the economic plus that has not done as it has announced. This has done like this announced and everything acts done to the equal that has announced. To good sure would purchase again.
4 / 5
Has on dipped was difficult like Chinese soyanual' is bad writing. With some help of some folks in a cnczone was able of the take that it runs and is doing a lot of
5 / 5
has Bought two. It has done neither. Any support of costruttore, although you defend to you for partorisca contact them directly in planting to complain the Amazon. Compraventa Fuji Frenic Partorisca The little more. It has done very better.
5 / 5
Works to the equal that has announced. No it likes Him To Him a fact that always is running, and has to that it has closed has been in a poster of breaker.

Top Customer Reviews: EJWOX Portable ...

Rating: 4 out of 5 with 40 ratings
4 / 5
It was happy to find this tool as me some laminated type woodworking and this leave me to form and sand some verges this maintains the sake 90 corner of title. Tan Far so it goes, this has done very good and saved me the plot of time sanding. I have used he in a hand poses streaky and has not locating in any surface of work. I have done a premier sander has taken enough take sanding the laminated verge 2-3/4' thick. That is to say in a max can exit you of the same sander. It goes well for quite a lot of 20 minutes and seeds a sander has prendido for a change. Still the turned and sanded. It has remarked also a handhold afterwards in a spindle has taken hot. I have left a sander cools the bit and tried it again. A change returned but only for quite a lot of 2 minutes. I routed that sander behind in Amazon and has purchased another. So far this one east doing well. A sander comes with the variety of spindle measured that it aimed. An only problem with that is a small plus spindle is smaller that a shouldered nuts that maintains a spindle on and those limits a thickness that can you to it do on without punches some nuts during some changes. An another the subject is with a big plus spindle. One has distributed washer that continues in a premier spindle to maintain a sanding drum to enter in far is not quite quite big in diameter to take a sanding which cover spent a paper of sand to slip in a drum. I tensed Some so many so it dared nuts manually and could not take a drum to take an a lot of quite a lot of coverage to maintain a coverage the slip was. I have not wanted to pose the tool in some nuts while it is plastic. Work but owe pause and reposition a coverage the plot. I have written in Ejwox in this thought could begin posed the small plus bit big washer in a sander but has not answered never.
Another that these two subjects, a sander works quite well. It has remarked when doing looks for it hand-streaky ranging spindle sanders on-line that many the same same companies sander, to the each to which likes him to him the painting he in his colour of mark. Obviously a lot he this and of the pieces the in other companies and this can be why Ejwox does not have me writes behind since apparently very in fact ways a sander. To conceal it paid for him, is the good tool to have in my tent and I would recommend to give tries it his especially you any type to form with forest.
4 / 5
It take it was some since required stars to have an element has substituted. A change has not done in a first unit. Once it take a working sander the very done a trick. I do with forest very hard to build electrical guitars. It does not have spatial for the regulate oscillating spindle sander. This portable unit has taken a grain of of final forest very hard until my form with ease. I used it as much as the streaky hand and like the upper bank setup and found the effective in both agreements. If I have to take a material to form this forest with my hand-the tools have lined, takes hours of manual work. I require an extra help to arrive to this point. Happy purchased this sander.

So far has used only he to hover he of 30 minutes or less. I will see that well it lines up over time. At least I have confidence in a service of client. A representative was very responsive and accommodate. It IS always the relief to learn that it can take help with elements that is purchased on-line. I have found a service of client with EJWOX to be the upper notch.
4 / 5
The portability is Awesome, especially him it the room is limited. Mountain to do the bank was easy and very appreciated.
Sand here, sand there, sand everywhere.
That has bought he for, Spindle Sander.
Faster sanding in limited to take to achieve zones that the Dremal tool of type.
Besides, when using the Dremal (knows a orthography), these little of the coverages of drum have maintained to the pop has been afterwards tense a headline of drum. It do not take Me bad, the Dremel is a better tool I own and use.
Needs more undertaken to do 3 long inch sanding coverages of spindle, A must, to take 5 stars.
Strong, that preoccupies ?
Any description, Any problem, that is to say why has 'In the first place', which are also awesome!
5 / 5
An oscillating spindle of laptop sander? I have not had any idea that has existed. It opens it does or that can the to him is tent in the drawer in place of a whole shelf or the corner consecrated of the counter. Awesome! Taken the today and gave it the walk of test. It IS it adds the small tool for a prize and perfect for a hobbyist woodworker like me.
5 / 5
This little sander looks to operate very good. He a work. It IS it does not have a power of the version to subject these fields sander but do only fe in a verge sanding necessities in my tent. That is to say the handy addition in my tools and will be very used while he the crown of big twisted subject which are also weighed to manipulate another road.
5 / 5
Good tool, compact, will take in of the hard places to achieve, good prize, well to have, a sanding the circles are 3' inch (76 mm) big.
My only complain-is has the quite a lot of electrical cape down so much can wants to attach a extention.
5 / 5
It looks the sake sander so far. Active HAS USED only the once. I locate down the bank and used some hooks avenge with. The time will say.
5 / 5
I am very happy bought this so that it is very useful for when the piece is on age for the type to stack these fields sander. It has had lately 2 very curvy projects with the big components and I are very happy with an action.
5 / 5
This Sander was the present, and an addressee has wanted to it! It was exactly which want to!!
5 / 5
Very very softening verges of around pieces of forests.
4 / 5
It was happy to find to to this tool likes-me some laminated type woodworking and this leave partorisca form and sand some flanges that maintains the abonos 90 corner of terracing. As the one who this goes, this has done really well and saved the plot of time sanding. I have used he in a hand dips resisted and any trace to any surface of work. I have done a prime minister sander has taken quite hard sanding the laminated embroiders 2-3/4' often. Ossia In a max can exit you of this sander. It was well for roughly 20 minutes and then a sander there is prendido to vary. He still turned and sanded. There is remarked also a handhold next to a spindle has taken heat. I have left a sander cools the bit and tried it again. A transmission has gone back but so only for roughly 2 minutes. I have sent that sander behind the Amazon and has purchased another. Like this far this one east doing well. A sander comes with the variety of spindle measured like pointed. An only question with that is a small plus spindle is smaller that a shouldered since it maintains a spindle on and this limits a thickness that can you to it do on without paste a die during some transmissions. Another subject is with a big plus spindle. A distributed washer this continues in a spindle first to maintain a sanding drum to go in the far is not quite big enough in diameter to take a sanding boss the one who leaves a paper of sand to slip in a drum. I have presionado a die so as dared manually and could not take a drum to grab a sleeve a lot enough to maintain a sleeve the slip was. I have not loved to dip the tool in a die how is plastic. Work but has to that stop and reposition a sleeve the plot. I have written the Ejwox in this thought could begin dipped the little has bitten main washer in a sander but has not answered never.
Another that these two subjects, a sander works quite well. There is remarked when doing tries it oscillating hand spindle sanders on-line that several companies offer these same sander, each colouring he in his colour of mark. Obviously a lot he this and of the phases the to other companies and this can be because Ejwox does not have me writes behind then apparently a lot in fact manufacture a sander. So that I have paid for him, it is the good tool to have in my tent and I would recommend to give try especially yes calm any type of shaping with forest.
4 / 5
Has bought spindle sander the sand spindles in my coverage (162 of them) more quickly that hand sanding. Probably any that espindle sanders' initially drawn partorisca, although EJWOX can/have the habit to complete this task. That has not known when I have ordered EJWOX Oscillating Spindle Sander has been taken the 3' longitude sander majority of boss of the bosses for sale go in 4.5' period; mostly packaged resupplied grits (2 or 3 ) stops until 6 different drum measures. After long investigation (Amazon, Imposición of House, Lowes, woodworking tents of specialitys, etc.), has ordered the container of WEN 5932SPC bosses of substitution in 4 measures (matched 4 measures of drum have distributed with EJWOX) and in 3 different grits. Sander Bosses that is coming with sander all 80 grit, any resupplied of grits would have preferred to try was. Hard to find the quantity of sleeve in period and grit wants to/ use more has had often I known this, would have looked for the sander with 4.5' long drums like this more options to buy stops of bosses. Serious woodworkers could prefer some options 'resupplied', 5 or 6 bosses in a width/of period/grit, has not been available. Reason for mine 3 indication of star.
5 / 5
Has taken was some stars have required of then to have an element has substituted. A transmission has not done in a first unit. I have received once a working sander do really a trick. I do with forest a lot last to build electrical guitars. I do not have spatial for the regulate oscillating spindle sander. This portable unit has taken a grain of final of forest very hard until my form with ease. I used it so much so that the hand resisted and so that the upper bank setup and found the effective in both arrangements. If I have had to take a material to form this forest with my hand-held tools, would take manual of labour hours. I require an extra help to arrive to this point. Happy has purchased this sander.

Like this far there is so only has used he for around 30 minutes or less. I will see that well it resists up over time. At least I have confidence in a service of client. A representative was a lot of responsive and accommodating. It is always the relief to know that you can take help with elements that is purchased on-line. I have found a service of client with EJWOX to be the upper notch.
5 / 5
The portability is Awesome, especially if the space is limited. You trace to do the bank was easy and has very appreciated.
Sand here, sand there, sand everywhere.
That has bought he partorisca, Spindle Sander.
Faster sanding in limited hard to achieve zones that the Dremal tool of type.
Besides, when using the Dremal (I knows a spelling), these few bosses of drum have maintained to burst was after presionar a headline of drum. It does not take Me bad, the Dremel is a better tool I own and use.
Need more undertaken to do 3 thumb long sanding spindle bosses, A must, to take 5 stars.
Strong, the one who worries ?
Any description, Any question, is for this that has 'Prevailed, which is also awesome!
5 / 5
An oscillating laptop spindle sander? I have not had any idea that is existed. Now I have a concealed can be tent in the drawer in place of a whole shelf or corner consecrated of the labour bank. Awesome! Taken the today and gave it the walk of test. It is it adds the small tool for a prize and perfect for a hobbyist woodworker taste.
5 / 5
Are really happy has bought this he so that it is really useful for when the piece is too big for the type to bank that rows sander. I have had lately 2 a lot curvy projects with the big components and am very happy with an action.
5 / 5
Quota little sander to do in of the pieces can not take my sanding canal. Used on some beams of lattice with the cove yard to soften some flanges. The beams were too many long to take to the mine small sander. It could have used the tape sander, but this sander has given more control. It looks enough very built and of the functions so only well. So only it wishes a vertical transmission was bit it more with a longitude of the shot, but happy in general.
5 / 5
This little sander looks to operate a lot well. He a work. It is it does not have a power of the version to subject that varies sander but will treat so only fías in a flange sanding need in my tent. Ossia The handy addition to my tools and will be very used while he the crown of big bloated table that is weighed too much to manipulate another way.
5 / 5
If I can not resupply the oscillating upper bank spindle sander or does not have a space for a then ossia the good alternative . Before it has taken this hand-held oscillating spindle sander used sanding drums for the press of bank of upper hammer. But press to hammer sanding the drums do not vary unless you move a boss of press of the hammer on and down.
5 / 5
Was very excited to receive mine sander and try it was. A mountain to subject excited one the majority of but is the little flimsy. A smaller diameter sanding spindle slips in an iron. I will fix that with some silicone or adhesive hot. Has abundance of power the sand with a big plus spindles. For a money ossia a compraventa excellent .
5 / 5
One has has touched holes in a dish partorisca base to locate one drives of the flange is not partorisca correct. Slip Of rays by means of. It has to that use different hardware with dice down. Manufacture and poor creation.

Sander Does like this feigned but suspicious endurance will be a subject.
4 / 5
Good tool, compact, will take to hard places partorisca achieve, good prize, good to have, a sanding the circles are 3' thumb (76 mm) big.
My so only complain is has the electrical boss quite short to the equal that could wants to add a @@@extention.
5 / 5
The value adds for money and of the works to the equal that has feigned. It is the little has bitten big that thought it would be and quite weighed for his measure. This in spite of am pleased with this action and flexibility with a row of drums of different diameter.
5 / 5
The work adds! Versatile and is perfect for my small tent. I turned it so only to the rovescio and modded in a bank and I do not require the version of table of a sander.
5 / 5
Is really quite heavy, had loved the like this an alternative to the mine tabletop [Rigid] spindle sander. Some projects that has used on could be be do in a stationary spindle sander
4 / 5
Looks the good sander like this far. Active used it so only once. I locate down the bank and has used some hooks is coming with. The time will say.
4 / 5
This sanding the tool is rediculously noisy.
Any reason because the tool that only transfers and occilates has to that be like this strong. I owe that I protect of ear of the wear when I turn it on.
4 / 5
Embroiders sanding.
Exhausts port too close up of a fund of tool.
Would owe that be domestic at least for ½”
His location is impractical for connection of hose
5 / 5
This Sander was the present, and a recipient has loved that! It was exactly that there is wanted!!
4 / 5
Has loved this thing of a first time used it. I used it already to help mark 3 zero clearance inserts/inserts for my table has seen, one for each of three different invernadero of the leaves. This will result one of my favourite tools.
4 / 5
Has been looking for something like this like this when I have seen this has has had to that the try. Has the tent of cupboard and we corian counters and these works of tool perfectly in corners of radio of the interior. I used it on other projects and he is to good sure the tool adds to have a loan.
4 / 5
This sander has surpassed my expectations and used it on more projects it that has thought I .
5 / 5
This sander has the little question that resists a big and more small plus sandpaper in a spindle but in general well value of the money and time to take this is to exit.
4 / 5
The product adds for a awesome prize. Awesome The utility that is able to be portable with him.
4 / 5
Is the point of prize is the good compraventa for a quality of a tool. It is used on a lot woodworking projects.
4 / 5
The base can stick and leave frames in forests that is takes easily
4 / 5
Adds little tool saves the plot of time of a hand sanding. I have done the headline of chance of the electrical Guitar and he have had the plot of curves this tool except the plot of time.
5 / 5
Has done exactly as it has described. Be sure to connect to the system of collection of the powder.
4 / 5
Did not use It still ,but lie of looks the tool of good quality
4 / 5
The works add partorisca these big works that does not return in the spindle sander.

Top Customer Reviews: Stens 285-585 ...

Rating: 4 out of 5 with 50 ratings
5 / 5
ANY SERVICE of CLIENT!!!! Out of guaranteeing this in spite of any response. Ossia One of some only negative critiques have not given never. I have cut my herb so only once that uses this assembly and see a video partorisca some results. Waste of money and TIME. There it is not presionando this up. The new pulley is now undressed was also. Spend of the extras few dollars and take the part of the main quality of the better vendor. BUYER BEWARE!
4 / 5
As I have read roughly 200 descriptions and some commentaries in some descriptions. I have been concerned partorisca buy any of these products so many after the days of pair partorisca go back and island solved is one.

1st - A bit fat of brass that returns that all the world complained roughly breaking was and be junk was in fact the quite fat and sturdy the fat that returns.

2nd - he, has bought the gun of fat has required he in chance perhaps. When I have received a course is gone in the thickness of plastic stock exchange with all necessary hardware for the trace that comprises some 4 rays to anchor one the coverage, a pulley never of spatial of entity, upper ray and inferior ray. I have taken a fat that the returns were to look and see if his was any fat and that it could say his has not been. I then reinstalled a fat that returns and has prepared a gun of fat. When I have applied fat to a fat that supposition of returns to the equal that displaced... A fat has been where has been supposed to and a brass that the returns has not broken. Shocker! I know well! The calm import has shaken as I add Granny Gertrude reason was sure was to break. It has resisted included by means of all my fumbling. I owe that it has pumped a trigger in a gun of fat 15-20 times and has said that it was quite.

3rd - I has had the selection limited of tools like the majority of mine is still in storage of the recent movement but I took it done to start with to finalise with a scrolling of an old to one installs of a new. I have used the 5/8, 1/2, & 3/8 sockets with the 1/2” engine, has used also 2 Phillips screwdrivers of boss, 1 adjustable plier, and the hammer. As I have had to substitute my unit been due to a ray of leaf that the pauses was and any when being pas able of the extract. With this be has said that it is extremely difficult to take a laughed and pulley if your pauses of the ray of the leaf was, the at all to prevent a main iron to turn. Like this here it is where a hammer and the engine of ray goes in handy. For judges of begin I freaked was reason had tried all partorisca take an axial to turn but could no. A pair of minutes in the silence and he paste me it we, Starr in something long quite and the material begins to fall on-line. As I have used a hammer and the engine of ray to try to peel of an inferior house reason has looked could, any ossia the waste of energy and time, instead take 2 Phillips engine of ray of the boss and look down in a cup of your pulley once breaks free and entirely fall an assembly.... Once your assembly is free and a pulley is seating in a coverage grab some two screwdrivers and turn a pulley until calm two whole directly in front of you, then insert some screwdrivers to some two holes, once calm this look in some holes of some highland rays, will not line on exactly but ossia that has has had to that do, now take your screwdrivers and insert to some holes of ray while also when being in some holes of pulley. This will maintain a pulley of emotional and would be necessary to leave you to be able to at least break release a die of pulley. All have had was a together adjustable of pliers and the quite good grip, if the the together better of the calm tools probably would have a right socket to the equal that will be easier. Calm once break it free your good to go.

4th - Install was the easiest way that scrolling for me. I recommend to take a fat that returns so that it is the tight access so only does not take debris in an inaugural, then recommends to install an assembly and presionando some four rays of coverage all one was in the first place, then install a leaf like this will give you a precise leverage does presionar an upper ray easier, then movement to a pulley - - - WAIT!!! - - - Dip a pulley washer on in the first place first of a pulley! A lot of entity! Once a washer is to situate then situate your pulley and tape in prójimo, take a pulley to seat in a spline(star) iron, then use your die of pulley and presionar down while it resists to a leaf with an opposite hand, has presionado once down a pulley( at the beginning will see some control tries rid presionar this ray, will look and feel like to go you to leave 1/2” short or like this, does not concern to use a socket and it presionar down a rest of a way) all a way goes advance and install a fat that returns( I recommends to use the wrench as it does not leave any a lot of room for the socket), cleaned on your disorder and you would have to that be was the some races.

Expect that this help a lot so that it has not had any way to know as it has done like this this was one first assembly of this type there was not taking never or installed. I have squandered To plot of the time in some wait that perhaps could save any some time. Neither it listens to all this crazy horror histories of the experiences of the people. I think that that my experience is a norm according to which a real product and one install. Very very easy! The product has arrived sooner that expected and was exactly that has ordered. It has attached some pics that I fact with and a product has finalised.

REMARCE: It maintains everything of some old pieces of some originals laughed. Calm does not know never until it is installed entirely.
5 / 5
Ossia One all-in-a substitution for the house shattered to say, that breaks the leaf to the giant rock would have to that it has gone around but any reason have been that goes around this damned rock for 1-1/2 years and so only has has had to that once say estripulación He', grip a wheel, give the cry of war, and can on that. In all the chance concealed does not have to that exit well. Like this emotional on, When I say 'All-in-an am speaking to some of some subjects another has on spent relating to a hardware, quality of hardware, etc.
1A) any precise to buy the 'pulley washer', simply use an old a when you take a pulley of a shattered spindle house.
1b) A house does not use self-touching rays. My house is coming with good quality (more in this late plus) that would describe like ome Note 5 Hex the boss that closes flanged ray of car'. I have seen it is note 5 reason has some three stabs that (remained with some assumed 2) means is the Note 5 ray that is so only well for me. (I remorse that fallen one 5 bucks in some extra rays that some people recommended; I have not gone he Comment same 5.
1c) A house is pre-touched and ships with some rays in him. The quality is such that could he easily unthread manually.
1d) also comes with a ray (notes 8) and washer in a leaf-side.
Are very happy with this compraventa.
5 / 5
Has purchased this unit by means of the almost done amazon two years. So only taken around for the install on mine Ariens model A22A46 yesterday, May 6, 2018. When it has taken around mine first tune of entity-on this cradle 200 hrs, has discovered that a idler the pulley was the subject worse that a spindle like this substituted the first. With which installation of a idler and a new spindle, the majority of my subjects of vibration/of the noise of coverage is behind me (for now). NOTE: I have substituted so only an accident spindle and has not had to take a mower covered to do a substitution. Any insurance in a right side. A thing to agree when installing these spindles is that a spacer, this looks the washer, has to be installed under a pulley, any up. Otherwise, A spindle will take after presionar. I have it quell'has bought of the second substitution spindle for a right side that has come with the new spacer. This a does not have to that way that has had to that king-use an original spacer. Something has learnt more is that a spindle apparently has two insiemi of bearings inner, cup and fund. My original was much freer in an inferior end that in a cup. My opinion of a zerk returning in these substitutions is that they are so only for show. My new a would not accept any lube and one returning so only among a way of installation because it takes on some of a depth of one 7/8' the superficial socket that leaves hardly quite boss-soiled of presionar an upper die properly. I left it on to dread that it takes would leave lube to escape or rubbish to enter by means of a cup of a spindle irons. You could use the deep a lot of socket to take around a headroom the @@subject or could take a zerk returning and king-install it after completing a spindle installation. So only be careful any to leave any rubbishes to some inaugural. Another thing to be conscious of: it is much simpler to take an original of the upper die yes leaves an installed leaf until this upper die is loosened. A leaf is your only leverage to maintain a spindle irons to turn while loosening a 7/8' upper die. It concealed also it means a brota has to that be king-installed first to try for presionar an upper die (gloves to fray to do to have that weighed like your leverage is against an acute side of a leaf). An another subject has had with a new unit is that an inferior surface of an upper die has not been still to square which means it no presionaría flush with a pulley to the equal that have has had to that king-use an original of upper die. It would have given 5 stars but for some subjects of an upper die any when being pas square and a lack of the new spacer. In general I am pleased with a result of final but no happy with an attention to detail for a costruttore. If has the press of tent, calm so only could substitute a bearings but thinks that is less global work and value a bit extra cash to substitute a whole unit. It suspects that a spindle bearings will have the longest life maintains some rubbishes to build up around a spindle and like this generating hotter. So only clean a zone around a spindles thoroughly after each use. Good and smooth regime mowing.
4 / 5
Has purchased two for substitution of OEM spindles in Husqvarna YTH 22V46 horse riding mower. To the build Adds-quality and prize added of fat zerk-that returns like OEM spindles has has not had; transfer of leaves smoothly and fast. Maintaining these bookmarked /when the substitution has required. How it has been remarked for another, maintains your original spindle washers or... So only buy the together new.
5 / 5
Wow, Ossia a awesome prize (paid $ at the same time)! I have taken the casualidad and has expected this would return my mower. It returns perfect!

Have the Craftsman GT6000 with the 54' coverage (Model 917288613). A spindle is exited and has verified on-line with sears the direct parts and so only sell this in of the multiple pieces. If it spent calm calm individually cost you well in $ 100 more exorbitante S&H to substitute a spindle (way too much money), but a question is some numbers of the parts is not of the same as as I have said previously has taken the casualidad and returns and perfect work. Like the @@subject in fact in fact looks to be better built (I really does not know , but surely looks very better). Here it is some the numbers of compatible parts would have has had to purchase and then has has had to that still dipped this together thing.
(A) $ tractive of Gram mandrel assembly of axial - Leave : 187291
(b) $ tractive of Gram mandrel house - Leave : 187281
(c) $ tractive of Gram mandrel that resists - Parts : 110485X
(d) $ crew & of garden of the Gram washer - Parts : 19131312 (or 582732501)

This part (Stens 285-585 Spindle Assembly) access like the glove. Measure included exact (height,width, etc.). Pulleys, Leaves, tapes, etc. All the line-arrive like this has to that. Any @subject, easy to substitute, and comes with all the rays of new/hardware. The greased up has dipped already 3 hours on that. Very better to save some $ $ $ and the cost is a versus a type of version that would be necessary to gather you.

p.S. This is not the ad has paid. He no for a vendor; they are so only súper happy that has taken it casualidad not knowing if this would return and the law adds for much less of money. And it has loved to spend on to any more than can require here is an alternating option if it does not feel likes to spend way too much money when this does well and returns one same like original course.

UPDATE: it has looked for the piece to fix a chair in mine mower and Sears wrongly has an integer gathers (together place) has listed under a Schematic Chair. Sears Splits cast : 187292 it likes him the number of new part that substitutes a leading part 587125401 Gram Mower Mandrel Assembly. Still it would purchase by means of this vendor because a value (sears loves approx. $ 50) For a same thing.
4 / 5
Has ordered 2 of these spindles & dipped the on today in 7/23/18 9 are, likes another active previously posted in some descriptions; still although a vendor any COMMENT It BUT HAS TO THAT be shipped dry and need (WELL MUST) be fat (OH And APRESAMIENTO Very FAT) calm want the partorisca last the moment, as unless you like him to him a smell of overheated the metal in the metal suggests to grease his, which do not have any question with. This in spite of, also suggests this before it install, or included grease them and a reason for the1 star (create would do negative stars if possible) where have the subjects is when he comes to a POS economic fat fittings/zert (which looks it could be brass perhaps?)! In all the chance, one 1st that returns/zert has while broken dipping in a fat with which roughly 5 bombs an end snapped And has had yes my hand bracing And a lot has not had any pressure, weight, or anything joining of a gun of fat in a returning in any way another that an end in the he so that it would owe that be when fat something thru the returning or zert. After looking for all day and after achieving was the multiple people in 2 different cities in Lowe is, tents of part of MULTIPLE car, tents of reparation of small engine, and still Fastenal (the one who looks to have the billion of types of fasters of all the classes) discovers some measures was a M8 still like this any one has had a lot concealed would do. I finally found some in 5 pm responsible for Port an hour was now that when be said and has substituted an original POS some with a m8 fittings again that in 2 different cities so only could be found responsible for Port in the band of metric variety and taken to cut some herb 6 pm finally. FYI An original returning/zert looks to be the run threaded and Lowe drives aims it also returns an edge of course 5/16 hole; THIS In spite of, in Fastenal, has tried one 5/16 run threaded zerts has had and his no apt. Like this again after registering each possible place that could spend him in 2 different cities so only could be found responsible for Port in the metric variety packs an only substitution in 50 miles was SPT so that I am sure I voided any guarantee a POS the vendor would have given in this POS spindle! As it maintains this import buys this spindle cost me; time = ALL DAY, Gas= $ and Aggregation = which can not be priced all Because of the POS fittings can so only hope and beg that a spindles is material of better note!
5 / 5
Have the Husqvarna yth2348. After receiving this spindle, has measured attentively everything of some heights, tolerances, etc. Perfect Party to original, a house has the fattest flanges, but a line to centre to the pulley and the leaf is identical to original.
Has taken averts to use the plastic hammer to drive a spindle of a house. BOTH bearings has been sealed the difference of a factory where one is opened to muck. NOTE, although a bearings is pre-lubed, a spindle is not . So much, I generously lubed a spindle and dip the together backside. You can do everything of of the this without taking avert, so only lube a Zerk returning in an axial generously. I took it so only it averts out of curiosity and no in future spindles. These looks of units to be same or big quality that manufactures. Wine with all four in die and increasing rays to take pulley, and with die/washer to take leaf. NOTE, the mark sure installs washer down pulley, was in an original pulley/spindle but does not come with this unit.
4 / 5
This returns mine LGT2554. There is something has not been that folks know. A spindle has to that it resists in an upper and a fund. A spindle the iron spends for these bearings, pulley on, leaf in a fund. You can add fat by means of a cup of an axial to a void in a spindle house. Here it is a question .... One 2 bearings is sealed bearings. Can grease it it was all master but calm so only is dipping fat in this void. It does not achieve a bearings because of a focuses in both sides. This applies to this type spindle, crew to have to that the heavy ad is different. The next times have to that it resists exited in an of the yours spindles, taking avert, will see that I am speaking roughly. Adding fat by means of a zert in a cup of a spindle swimming. Calm have there is not taking never to focus of the sealed in resistant? It is easy, the simple chooses will do. That will see with more bearings is fat very small. Like this life the scarce. If you want to do the sealed in resistant last longer would be necessary to add you fat the in resistant. This can be done in the few ways quite simply. If it is the hule /focuses plastic simply be sweet when take a focuses in a side, adds fat and substitute a focus. You can do one same with a metal there is sealed bearings so only does not bend a focuses. Both types of focus were pressed simply to plant with which one that resists has been done, his flex enough to take and substitute easily. Or you can poke the tiny hole in a focus and insert the needle of fat to apply fatter. It focuses a hole with silicone or such and your bearings will last to the longest plot. There is mark that do better with a quantity to grease used but almost all have looked would owe that it has had more fat in them. This applies in any sealed that resists, any only a bearings used in these spindles. If you want to repair these spindles go to do like this in the OEM spindle that an upper that resists in an of one 3 spindles (bought on Amazon) is not lasted the full year, 6203-2RS is an upper that resists, 6204-2RS is a subordinated in resistant. While an axial and spindle the house is in the good form there is any calm reason can no to reconstruct them. Both bearings near would run in $ 5 total, gives or take and can be found on-line or locally easily to the equal that are the common that resists, nothing special. Regarding this element, returns and works, will see how long hard but would have to that be resembled OEM. Wine with a required 4 rays to attach a spindle to a mower covered, a die of pulley and spacer that goes under a pulley.
4 / 5
The mine is gone in the box of good map and wrapped in the plastic stock exchange sealed. It comes with the pulley washer and die as well as 4 spindle rays, ray of leaf and (slowly) washer. A spindle the holes of ray are threaded.

See to plot of habladuría in a zerk returning. It is it regulates it returning and like this sturdy like me a lot has used. Yes, so only like any one another automotive in the resistant device comes dry and need to be lubricated. An organism of a house will require to be fill with fat. This will take enough bit it. You will know that it is fill when fat begins to filter of any subordinated or like this in my chance, a cup of a spindle.

Has not used a leaf has distributed washer how is flat and any cupped like an original. A cupped washer applies torsion to a leaf directly, any to a fund of an iron. I torqued so much a spindle die and a ray of leaf to 50lbs. I have cleaned all comprising some surfaces of pulley where some walks of tape and has shot on mine 54' coverage. Fact like the charm. I expect that this was useful.
5 / 5
I owe precaution against buying this spindle assembly. I have bought two of them, and his both have broken a lot quickly. A prime minister has broken a first day, an hour or like this to mowing my huerta. A second has broken while mowing a gram. Paste the rock of any measure will cause this spindle house partorisca break in some highland points. Everything a moment, one 10 old year spindle the assembly partorisca another leaf is entirely well. These produced is economic and probably well if you do not have any rocks, but is the waste of time, money, and the endeavour does .
4 / 5
Although my mower was guaranteeed down, with which hours partorisca treat several departments partorisca try to speak senses to them so only could me send a part, has decided to so only the order to me. It believes it or they have not wanted to take some integers mower- with which have had has fallen already a coverage to imagine out of that has required - there is not wanted to so only a coverage neither!
Was to touch then the cost of diagnostic almost so it likes part. Well, if your original has broken likes mine , is fracking obvious that the diagnostic is not necessary- a harm has done metal of the pot launched has failed at all four corners... As that pays the side that could later covered IF a tent decides that it was the @subject to guarantee after all, risking them the fixing and touching me was a nose to do although his on some atrocity roughly he no when being pas covered (spent to the partner a lot). Well, it concealed and a mower has gone he for two weeks or more engreídos me partorisca take the shot with this part.

Is better done that an old a? The time will say. For now this in spite of, was the just prize and so only that has required to save me a hassle to treat Lowe is... That memory- I need to file for reimbursement.
4 / 5
Has two spindle still heights Craftsman mower coverages. One this 4” big on a coverage and another east 2” big. This one this 4”. So much yours control for a right access.

This spindle the assembly comprises all some parts have required to substitute the complete assembly. It has taken mine of AMC TENT of Part and has a fusion of house, iron, cup and inferior bearings, ray of leaf and washer, and an upper washer to resupply clearance for a pulley, an upper die, and a four that fulmine of trace. A fusion that traces the holes are touched, different some quell'use self-touching rays.

An iron has the fat that returns and is empty until me so only under an upper in resistant. There is the 3/32” hole in an axial to grease. THIS In spite of, a bearings is sealed like this greasing a spindle using a returning fat of only waste and adds embrague to an axial so that it does not turn like this freely to the equal that has to that. In worse greasing a spindle will blow out of some focus to resist and the muck have left in. My original bearings is less bad with which 20 years so that the shows have had to the long time. Some the original axes do not have the fats that returns.

Partorisca A short spindle house (2” big) some parts come for separate. A house is SKU 80-12-005 and comes with rays of the new mountain and some holes are threaded. A spindle the iron is SKU 80-12-006 and comes with an upper and inferior bearings, ray of leaf and washer, upper washer and die of pulley.

A spindle bearings is 6203-2RS in a cup, and 6204-2RS in a fund for both a big and short spindles.
5 / 5
Has had a spline leaves of one of a coverage spindles goes bad because of a splined sheave in bad disposal. This unit is the sum of substitution directed . It has taken more with a longitude to take a coverage of a mower that has done to change out of a spindle assembly. Two things to agree - some new rays very active washers while a OEM the highland rays are the washerless creation of boss, is flared to have the washer likes base. I reused a OEM rays. Also a ray of leaf, I reused he also, as I like him to him a way a OEM has a same type of flared base. A new spindle is trace w/any fitment or subjects of alignment and was smooth likes silk. The greased so only to do sure. Longevity? It can no esteem has had so only a mowing has installed of a new unit. Materials of Const: A unit looks for to be built like this as well as original OEM house of the unit of metal has launched, but all are, bearings look to be of a same quality, axial material looks to be quite well, spline the tolerances are the pocolos looser that would have thought. A thing would recommend, when presionando some highland rays - use the esalquitrán' normalised (likes in the car wheel), this will leave a whole assembly to be presionada without undue emphases of improper uploading.
4 / 5
One of a two spindles that has ordered has been missing a washer these low chairs a mower leaf. It does not import this in spite of like this washers resupplied with these spindles is not a correct washers for my Husqvarna 2042LS 42' tractive. I so only king-has used some rays of old leaf and washers. Some correct rays/washers is a Husqvarna 532193003 Ray and Washer Assembly. Another @@subject that has had was that it has not had any indication or no these spindles was pre-greased has dipped like this in 75 bombs of fats with my gun of fat pneumatic. Any sure has dipped enough in but of a sound of a gun of fat looked likes has had some pressure beginning to build up inside a spindle. Another that that this in spite of, was very happy to find quality spindles for my mower this there has been a fat zerks.
Ossia An update my leading description: My mower has begun to do the pleasant noise he roughly done two month but could not imagine out of that was bad with a mower - until today. One of a two spindles is coming averts. Like the result my pulley that mountains on a spindle has taken ruined, some teeth in a spindle is spent was. I think this spindle has not been gathered correctly. It appears that a bearings fallen leaving a too much game in a cup of a spindle. Another spindle looks to be SIDES like this far but are really disappointed with this compraventa.
5 / 5
My spindles has been ordered by means of Mowtown EUA, which also references OEM the parts of Substitution likes them provider. A spindles was a substitution esatta for one some have take of the Husqvarna YTH22V46 mower has covered. A Chinese in the resistant numbers of part are some same, how is a spindle forge frames. A different only thing is a Zerk fittings on a spindle irons, which am not sure is included necessary of a bearings is sealed. My old spindles was well, but a coverage had seen better days, and has broken of half a spindle the rays that takes. You will do one same.
Am writing this description to save you some time and question if any one the some tools, knowledge or experience to do a work. You will require a gun of impact, gun of fat, the edge that concludes liquid or gel and patience. Calm also will require to fall a mower covered to the equal that can have appropriate down forces and seating for some rays of coverage. Reason? Reason a spindles has received is not threaded and there is has not had the rays of the car likes indicated in a picture. They have come with blacks hardened rays of flange of the steel, which are done to be driven ONCE to cut some edges and has attached a spindle. It is for this that will require a gun to impact to seat some rays. While it is possible to edge a spindle holes with the wrench of ratchet, retreated them was and have them has attached then to a coverage, an integrity of some edges will be compromised and your arm will not be happy. Edge to use locker at any rate .
Another information to assist your installation is to use a steel that resists washer take of you old spindle. This pair comes with galvanised on-sized washers, which cover too much of one that resists (subject of hot) and does not leave some pulleys to properly presionar down. A washer goes under a pulley. A picture of the product also tip that resist washer in a spindle and one in a foreground. There is so only one for pulley.
Has used some dice of new iron to attach some pulleys because they are returned well and has closed dice with nylon inserts/inserts.
Has used my rays of old leaf reason some new some are flat and no presiona down well. Agree your lock of edge.
Finally, are not engreído that the fat is really necessary with there is sealed bearings, but has pumped the half the tube of fat in the each one one and to the left stroll it. Note: in reference the leading descriptions, if you are inexperienced to a point that you in fact break the Zerk returning while greasing these spindles, then is sure to say you would not owe that be that he a work in all the chance.
All has been I near splendidly and has run a mower hard for two straight hours with which reassembly. Any sound, vibrations or other questions. Neither a spindles neither some pulleys were to warm to a touch immediately with which mowing.
Would have given five stars if some pieces in a picture there is matched that has been rid. Hope This helps!
4 / 5
This is to arrive punctually. It does not use hardware that comes with this element. A ray to attach a leaf to a spindle will not fix a leaf to a spindle closely, at least any in a Ariens 42' mower spent. Some highland rays have distributed is of some substandard type of steel and three of a four loosened on afterwards several minutes of mowing, one has broken. Before it could take a mower has closed down, has had wallowed was one of some highland holes in a coverage. Felizmente, reason has the a lot of stocked tent, was able to remount a spindle, but there is still the plot of vibration, as I can be look substitutes a coverage, no a without importance cost. I will verify an iron for runout today. It is possible a vendor will blame my lack of skill for a failure. If his , will be wrong. If I have had the nickel for each ray has presionado properly on some years, would be the rich man . I will revise this description for up if a spindle the iron is some and can rectify a question of vibration. In general, way too many questions for the simple spindle substitution.
4 / 5
That can say, these are not Stens spindles. After receiving them, was packaged in of the plastic stock exchanges without a Stens box (possibly to save on shipping), but a spindle the spacers have been missing. Also, it has had considerable game among an axial and a house. Although they have arrived with greasing fittings, a has not accepted the fat and both have been drilled was-centre. An iron has fallen out of a bearings while it installs a pulley. Some houses have AYP (I assume) the of course launched numbers to them, which are still in simple view, which also directs me to believe these are reconstructed, which is well, but is sold like Stens produced with his numbers of part. Also, a ray of leaf and washer is considerably different that some original.

Has ordered the together of Stens spindles of the reputable the trafficante and a difference is clear. A Stens the houses do not have any of course launched numbers in them, all the materials are new, a spindle the die is slightly main, a fat fittings is centred perfectly in an iron (and accept fat, different one of one has reconstructed the units have received), and has arrived of the plásticoes-wrapped in the boxes and all have come with a spacer for a spindle. Both a has reconstructed & Stens the houses are touched in fact with rays of trace. A ray of leaf and washer is almost identical to an original AYP spindles in a Stens.

In my opinion, does not squander your money in these.
5 / 5
Looks to do well, but did not use it but some times installed that of then. I am not too sure in a need for the fat that returns of any of some another has seen has this characteristic. I marvel me if some another has the sealed that resists that obviously it is less interview and not guessing roughly when to apply a lubricador. It has not had any instruction has comprised to dip the schedule or that to apply. My thought is, to take a fat to one that resists, which is in a fund, takes the number of squeezes for the take to one in resistant. Instruction of client very poor, i.et., Any one.
5 / 5
Has bought to substitute a spindle in mine Husqvarna to 54 thumb mower. Access fantastically. It installs taken roughly 30 minutes - 1 now. Everything requires is a gun of impact. As it does not scare to do you the. Everything is to take a tape was. Drop a coverage to take all some pins. You take 4 rays for old spindle assembly. It substitutes with new a. Take an old pulley. ( It could require the hammer the paste was) Ray that behind on. Calm then substitute a leaf. Fat a zerk & would be necessary to be you well to go. Mower Will be a lot like this new!
5 / 5
I have ordered this partorisca substitute my broken spindle. It is gone in in the timely way. It installs it was quite easy. I immediately dipped the to do in 3/4 acre. Roughly halfway by means of my second cutting, has begun to listen the little noise. I have thought perhaps mine another spindle was to require roughly to be substituted. For a time are the neighbourhood of a way by means of my cutting third, has had the plot of the noise that comes from/comes from a coverage. After the careful inspection has discovered was in fact a new spindle doing a noise. I have sent the message to a vendor to ask in greace. My question has been ignored. A spindle is now out of guarantee. As I took it it averts to discover that it is going in. Had absolutely any fat in an upper in resistant. My deception would be necessary has returned it while you are still down has guaranteeed.
4 / 5
Has substituted 3 in mine Husqvarna rz5424 and has run roughly 20hours w any question. The prize adds and of equal quality to a stock some has taken them was. ...
Some things:
1- the mine was pre-there is drilled. The rays return the tad loose, like the account of blue locktite was the must.
2- The mine has come w perfectly doing spacers, but of the old some return the little has bitten better so much the reused him.
3- Fat, fat, fat! Zerk In Before utilisations in. Now, with which 20 hours, the leaves turn a lot of smoothly.

Hope That it help.
Partorisca A lot down $ 100, calm really cant has beaten these!
4 / 5
Spindle Is the correct access. Last season, has bought both spindles, the pulleys and the leaves for the coverage reconstruct. Disappeared some parts as it could not complete last season. Headed mowing with a coverage has reconstructed this season, third cutting and then a splines in an iron has been finalised, and a splined the holes in some pulleys were wallowed was. In the heavy herb attended the properly tensioned tape to slip, no for some pulleys to shred a spindle axes! And yes, some spacers were installed properly. Poor (or any) the heat extracted in a splined irons. It will look for the different source of then now has to that reconstruct a coverage again. Disappointed.
4 / 5
Absolutely perfect in mine Craftsman YT4500 mower with the 54' coverage.

Has broken A spindle assembly and ovaled a hole of centre in a pulley in a side of download. Has no the clue as to that or reason I he but I 'and the. ☺

A work was sincere and easy. All have required was for a pulley that has ordered for separate.

The nave was punctual and has taken in just 3 days..
5 / 5
Any sure has not been used in some point. Iron of star in a cup of a spindle is not esalquitrán shaped' anymore. Any one has included approached to resist a pulley of tape. Shipping the box was intact the only looks a esalquitrán' has been produced bad or this was the element has used that is to be return and has on cleaned. Any way suffers harm. Caveat: It supervises your element two first times to take a time to install it!! They are sure happy that has done.
Will modify this description when I receive a substitution.
5 / 5
Any to hard to install with which takes your coverage undressed. I comprise reason send new highland hardware, has broken 8 of 12 in highland existent rays during spindle scrolling. I do not comprise that exactly it was wrong but some dice of pulley of the new tape no presionaría down a lot @@subject that has tried. It has tried finally some original dice and has had any question torqueing his down. It took on 350 hours out of my originals spindles but has decided any to press them much more there. Be sure and grease your new some in installation, has not looked to be greased in a factory.
4 / 5
This perfect record in mine 46' Craftsman gram mower. It abuses my gram of horse riding mower more than has to that that it is one of some main reasons am substituting this part. An old one was welded on and has broken of one 2 remaining mountain the rays that takes era. If you do not have a wrench of impact, would suggest to leave a leaf on and trowing the bock of forest under a coverage for the resist. ( I have said the blockade of forest, no your hand). This will leave you to take a pulley with wrench or normal socket. A pulley there is pulled was aimed some ware in some teeth that links up with a spindle but apt snug quite so that it would not turn around an iron. I reused the a whole year without questions.

One a thing would owe that it has done is substituted both side while it was in him. I have received so only another spindle for another side and has installed it. Now I owe that order the new pulley reason have not pulled an old one was until it has taken a new spindle in. You save some time and break it down before orders for the inspect.
4 / 5
Has substituted the shouting and frozen on original. Bolted Well arrive and has been in common the sense adds. A comprised zerk returning in an end the fat is the good touch also and something an original piece has been missing.... Suspicious reason of failure also. The maintaining that can maintain greased and calm. Finishing of a season spectacularly, and the suspect will be to substitute another two with these next year in some point!
5 / 5
Be ADVISED - - -These assemblies are shipped without fats. You owe that grease each one to which likes the street an easy access Zerk returning located in a spindle irons.

Has purchased 3 of these spindles like this far. A cane of the steel in the vacant plot has taken a prime minister a, then Big salt water in Carolina recent that the riadas taken another two like my mower the coverage was under waters for the few days. One first substitution has survived one flooding has fill like this he with wheel of marine note that resists the fat has seen a Zerk returning in an end of an axial and some two new substitutions have received a same treatment with fat.

A spindled has arrived punctually and in good been But no punctual to use. A little note in a box COULD be useful.

When it has PREPARED properly a spindles the work adds in mine Husqvarna YTH24V48
5 / 5
Perfect substitutions for mine Husq 46' mower spent. A bearings in the mine has been shot, these practically jumped to situate once has taken an old some were. I have had to use some spacers and old rays for some leaves. Some the new spacers have not gone quite fat or some the new rays were slightly too long (or both) to close some leaves to plant securely. You mediate them to them have expected to have that reuse all some old rays so only that owes reuse 2 was extracted no big , certainly a lot enough to jump the star.
Estimativas-Wise each one which so one was slightly more than one of some parts of component. Well it validates he for a work has saved to try to pull & prints it that it resists!
4 / 5
Ordered by means of 'General Gram' storefront and received in well timing (August 2017) the substitution was easy. It has done so only very like this far .. The mow 4 rough acres once the week like this the assembly has been when being announces roughly 11 times.. 3 times this year (2019) so only... I have substituted before with assemblies that has threaded highland holes and no threaded.. I know a no threaded coming with self touching rays as it sees another reviewers is not conscious of.. I have ordered this assembly several times and has not had some partorisca on me partorisca any apparent reason.. All have been dependable and of confidence, unless lack of mine partorisca any prendiendo attention the rocks or of the roots of tree and try the mow his on.. Yes it spends ..lol.. Especially in some acres I mow. Also mow in gopher mounds of muck... It does not help my leaves , but there is has not affected never a spindle assembly
4 / 5
Rays a lot on, but a spindle is too small partorisca a pulley. There is the video has attached to another description that has not seen before I have bought this. It does not operate. You can I scrape he well until your coverage, but a pulley will turn freely reason a spindle is too small and some teeth are not quite big to joint to a pulley of an original spindle.

DOES not SQUANDER YOUR MONEY IN THIS JUNK!!!
4 / 5
Owes fat previously to use. Economic, crappy zerk and system of lubrication. It can not say when full until the swipes to focus upper was that it exposes a bearings. To him it focuses it has pressed behind in but have serious doubts in a longevity of this part. I have it quell'has used so only a mower two times of an installation. Happy has bought 2 as probably I will require another very shortly after some starts of herb of cutting season. It would not recommend .
4 / 5
Has bought this mandrel assembly for Sears Craftsman YS4500 42' yard mower. Complete wine with 4 in spacer of quantity of pulley of the rays washer and die of Lock and ray of leaf. The amazons estimate remained with shipping was more economic that a mandrel assembly without hardware at all, in some local tents. A local prize is 53 bucks for a mandrel so only, in sides and increasing rays of extra spacer, he buck the piece, 2 bucks each one regarding another 2 pcs.. To good sure will be Amazon to purchase in the first place from now on.
4 / 5
These are a part of substitution esatta for one some concealed is gone in my horse riding mower of a factory. Mark sure finds some numbers of correct part for your horse riding mower using your manual owner or the web of place of a costruttore. I have decided to take the pair of these spindles and was the good thing that has done. A brota that aim of trace in both of some originals spindles has been twisted of my obstacles the paste in my yard. Has has had no the subjects of entities that installs these parts and I to good sure would buy these again.
4 / 5
Has bought this for the Craftsman GT5000 tractor of garden. This was an exact access for a mower. It would not call it easy to install reason owe that take a mower has covered to install a spindle, but concealed is not a question of parts. Calm once take a coverage of apresamiento roughly 15 minutes to substitute a spindle. I have installed this spindle in a start of last mowing the season and is less bad.
5 / 5
Has purchased this in May and received and installed the he 9 May. It has broken last night. Do roughly 10 past of days a 30 turn of window of day. There is run over the small mound of the muck and he snapped. I do not expect this thing to take an abuse of the big ad mower, but seriously, muck? Coming on!

Loses some days of launched-iron or steel. The aluminium of mussel is so only a lot quite strong for a 'oops' moment.
5 / 5
A splines in a spindles has almost failed immediately. To be just some pulleys of economic substitution can have contributed to a question (these splines ruined entirely also). I have maintained a Mandrel house but has substituted a spindles and pulleys with genuine OEM parts - now everything is doing well. My joint is clave with genuine OEM parts. BTW, This mandrel the assembly uses the sealed in resistant upper and inferior - then reason a fat that returns? It results a OEM mandrel gather uses the lowest that resists without focus - calm so much is supposition to pump that mandrel the full chamber to grease the lube that lower in resistant. If these folks was to change a creation would think that that they would do some commentary in that and with sealed bearings cup and inferior that the fat that the returns looks to have any purpose. They are I wrong?
5 / 5
Installed in mine Husqvarna 46'. Roughly 1/8' more along global that an original part. Has the fat that returns the difference of OEM. Place roughly 10 bombs of fats in him, has not felt any control but I do not want on grease it. I have it quell'has run so only he for the few hours, but hot taking to a touch. An original spindle in another side hardly takes cup of caffè warm, but this one is almost too hot to touch. Any sure that the time will last.
4 / 5
A prime minister a wine with some highland holes am drilled, but untapped. A self touching the rays were hard of presionar correctly, and has finalised to undress. This one is touched and comes with everything of a right hardware. It has big wait ossia a last time has to that change the spindle in this coverage. 4 stars for Longevities because there is any way to know this time.
4 / 5
A splines on. A spindle was very bad machined and cut too small to retain a pulley that is partorisca be installed on that. Besides any one has gathered does not have to that it has installed a washer and ray that retains a mower leaf. It was screwed in so much of tight that ii could not be take to install the leaf!
The quality controls very poor is one, returning this so that it is not usable.
4 / 5
Substitutes an original Husqvarna spindle perfectly. It does not know reason but an upper original that resists the neighbour fracasado and a oem spindle wobbled the death. A unit of substitution has the fat that returns that a oem the course has has not had. I am not sure if some needs of new part partorisca be fill on entirely with fat or no. A bearings looks partorisca be has sealed unit. It is the plot partorisca grease folks partorisca fill a spindle.. I have shot some fat to a new part and will maintain an eye on that.
4 / 5
Has the lubrication zerk in a cup of a spindle irons. Calm immediately would owe that attach the gun of fat his and bomb merrily was. I have assumed a unit arrived with fat in him and he leave me to us know he very inner 90 seconds of mowing, almost taking up.

This can be the -was. I do not have remarked any more than mentions a same thing. Have prendido immediately, has attached the gun of fat ( has one, well?) And pumped in the big quantity of moly graph fat of lithium. It is been a lot never of then. If no for an unexpected work, five stars.

For an avoidance of doubt, this assembly is comprised of a spindle (orients it sheared a star was), a mandrel the trace of house in, four new mountain rays and new upper die. An only part recycles is a spacer in a spindle irons among a house and a pulley. It is all precise to substitute the spindle or mandrel in a prize of any so only.
4 / 5
There is shattered my spindle mowing in the rock Ive mowed the time of dozen. Required the substitution quickly, as it has ordered this no OEM run worh any hesitation. Ordered a OEM for backside up. It was pleasantly he surprised it that this spindle was the directed retrofit and has done flawlessy. The wine with all a hardware has required.
5 / 5
Update 10/7/14; These require that one fill a cavity with the fat of good quality. After installing sense has not had any need for fat likes has comprised bearings is sealed. This in spite of, these units take very hot when I ran without fats. I have used Valvoline all the synthetic fat purpose and has used roughly 1/2 of the first big tube of the fat has begun to exit in a fund bearings. Now they are running good and frescos and much calmer. So many, has the full tube to grease manually to fill a very big void zone to the equal that are cooled properly, lubricated and protected of moisture. Once fill up, two or three bomb each one that 25 hours will resupply the very long life. Appearance these helps.

Has ordered two of these units to substitute my originals of 8 years in mine Craftsman YS4500 with the 42' coverage. These come complete with some 4 rays to fasten the to a house, some holes ARE pre-has touched included although some states of the description is not !

Some rays are abundance long enough to fasten some drive of tape and a guard of inferior piece with spare abundance. It was very happy in this reason each one which of my old rays has while broken takes, which is very common when threading steel to the aluminium and 8 years have spent.

Are unsure reasons the fat that the returns is used in an iron like both bearings is sealed, my original house bearings was still calm and tight with which 350 hrs. Without fat fittings. They have been substituted reasons some axes have been bent of strikes of object and he no longer mow equally. This in spite of, a fat will prevent moisture questions as well as it helps to cool. So only be prepared to use the enormous quantity to grease to fill a big void zone. Personally I see any reason to grease them.

A SAE commentaries 5 ray of the leaf included is of big quality but a washer is to walk more than an original 'cupped' washer. These do not resist a brota closely quite and will spend a stared teeth quickly of a leaf that movements slightly and would have to that be corrected. I cant see where a difference in side of the plan vs. The cupped washer would be a subject in manufacturing. I have used my rays of old leaf and washers like them where the note 8 SAE 3/8-24 fine edge with a correct washer. I torqued the to 50 lbs. ft. And a ray of upper pulley I also torqued to 50 lbs. ft. I mowed for 1 1/2 hours and animal-verified all a fasteners, all are still properly fastened and torqued, any loosened arrive which is the good signal of the quality armours plate concealed does not extend .

In general, this product is done a lot well , equaling a OEM the quality according to which can say in the quite thorough inspection. A bearings is of big quality hardened steel with a costruttore listed as 'AIR', some looks of house stout with fat wall, some dice and the rays are all big quality as well as an iron. When You it the factor in those these units is less than half a prize of a OEM assembly (which does not come with any dice, rays or washers) is the no brainer.

IMPORTING; An element this unit does not comprise is a spacer that is used under an upper pulley that put a torsion of pulley uploads in a bearings inner race and prevents to rub in an external race or house. Your old an are likely broken of compression or imbedded yours old pulley. It is the very economic element and will be happy calm purchased it when calm @give you your old an is not reusable when you are in a half to gather. It would not owe that be reused yes loves action and maximum life without wobbling upper pulleys. Grab One for each house as well as substitution upper pulleys, can also he well so that it does not have to that revisit he for several years. My interiors of upper pulleys bores was in poor condition and returns a lot of sloppy with almost any interior spline the teeth that remain. In an end, has purchased an assembly of house, a spacer of pulley Husqvarna 187690 Spindle Washer For Husqvarna/Poulan/Roper/Craftsman/Weed Eater , new Maxpower brotas Maxpower 331742S Brota for Yard of 42 Thumbs Poulan/Husqvarna, Substitutes 139775 , and a pulley Husqvarna 195945 Spindle Pulley For Husqvarna/Poulan/Roper/Craftsman/Weed Eater , this has ensured I any course to any one subjects.

So that ask , these units are done in china according to a stamping in a fund of a house approaches a ray of leaf. This in spite of, can be simply he gathers there as 'AIR' bearings is an American company. It is possible has plants to manufacture by all the world this in spite of. Any worry this in spite of, is the unit of quality .

Kevin Bowley
the tractor and Small Engine of Kevin Reparation
Of the sud Berwick M. 03908
5 / 5
Like this mentioned for another reviewers: hole of pulley and spindle earth of axial each one which so another to powder. This arrived with which roughly 4 hours of herb of height of half cutting. Of then this has not arrived in an original spindle this is to install still in another side, has to be in accordance with another reviewer that a spindle irons in this spindle is not 'lasted quite metal to withstand some forces experiences.

Another description that detail a subject same:
5 / 5
Absolute junk, and the vendor is shady.
Leaves didnt last 20 feet, is coming averts internally.
Resisting assembly wasnt pressed in right, has eaten new tape and desstroyed new pulley.
Buys one, the sure mark greases a heck out of him considering these arent dry correspondent, without instruction of vendor.
5 / 5
Required to substitute one in my tractor and once I to engineered a number of part, has taken is one. Really it likes that now it has the fat that of returns in a cup, included although lack of the fat has not been my reason for failure. A four pre-has touched to locate the edges are a lot also.
If your Husqvarna Number of Part 532 18 72-81 Mandrel the house is broken, any disorder with reconstructing it and so only buy this complete assembly for the little has bitten more money. You take a house , in increasing rays, bearings, up to date iron, ray and upper die of inferior leaf with washer in a box.
NOTE: Be sure to pump this full thing to grease first to use so that it looks to be almost dry out of a box. Fat of his bomb until the fat starts of one of a bearings and is dipped to go.
5 / 5
The height of perfect substitution for my MTD 46 tractor of thumb. Wine with the small spacing washers for use under a pulley to take a height of correct pulley - seating it afterwards to an original part takes, was obvious that washer was corrected. Bolted Well in and is been in service for 4 month without subjects. A subject in a prize!
5 / 5
Is the good substitution ! Returns esatti for my coverage. It comes with the new but the calm rays will require some Locktight. Not being any one protects for a fat that returns so that the mine has been broken, meh... BUT you will love your original leaf washer with a yard of relief, reason all this is to distribute is walk he washer. - Half of accident.

Top Customer Reviews: VFD 110V Input ...

Rating: 4 out of 5 with 24 ratings
4 / 5
Very good VFD controller, a number of the available parameters the tune is impressive and the bit partorisca impose. Particularly I enjoy to be able to dip precise values partorisca maximum and current voltage, as well as a quantity partorisca time it will spend partorisca augment a speed until it achieves an objective RPM value. A last calm mean can drive devices of engines very heavy/ that otherwise instantly overburden a controller, as well as preventing an engine partorisca accelerate too quickly while rule a speed has seen a @@@knob of control of the front.
Would be good to have the most detailed exposure of only aims the value so only a time (Defaults to a RPM), having the voltage and the current consumption would be very useful.
FYI An application am using this controller partorisca east to drive the 24V turbomolecular bomb. An assembly of leaf is very heavy and without the very slow acceleration trips a current limiting, like this with some right parameters have dipped work a lot well with this controller.
5 / 5
I really loved the alternative the most economic to some more expensive units. I have purchased a 110v/3hp, those careers to 3 phase hp engine with 110v gone in of discharges he of regular wall. I have taken the casualidad is because of some good descriptions. I have installed a VFD in going back it small and has to that say that extracted a lot well. A manual would owe that be redrafted for the technical writer reason any does not have any experience with VFD is could be defy the setup. In this chance was the quite simple project and a Huanyang VFD was the alternative sum. One a thing that took really for the surprise is a responsiveness of his technical support and shipping time. The support of technology has answered questions inside the few hours and the nave was 5 days! I can not take to to the service likes that of of a joint down a street that gouges me every time I walk in a door or call. Of then it has been installed ran it really hard. Like this far like this good! They are happy everywhere with this unit and will be to buy more.
5 / 5
Your browser does not sustain HTML5 video. Easy to dip up using a support of manual Technology distributed with Video of Youtube still there is many on Youtube/of Youtube to help drive this has interested a same thing has done. It distributes the smooth operation of a unit to an engine (any noise of frequency of the yours big) - An only WITH having with a unit is a constant in current of a defender to cool. It is not terribly strong but after the moment, would like me have any noise of defender. Certainly it would buy this mark again and reason has has sold like this in our country, would like me see a cost of this drop of unit to around $ versus when being in $ . Certainly it is not Allen Bradley where can connect you yours his computer and place on some parameters (súper easy!). This unit is the manual hands -on dipping of parameter and requires the manual of an operator.
5 / 5
Acts perfectly with mine 800w 110v waters it has cooled spindle. Ossia My second Huanyang VFD, a prime minister one has been fried after a spindle has taken taken in the piece of forest that cut the, has begun to turn a piece of work, and has drawn also can before could closes era. There is tripped a breaker and when I turned it behind in the big resistor in a PCB has begun to smoke. I am teaching I that to use the CNC car and apparently still have the plot to learn.

Had been using a forward VFD partorisca almost of year without @@subject (although it is failure was almost certainly my failure). This one has been he is substitution, so much have a number of same serial and second that it can say everything of some electronic components in a PCB is is exactly one same. After wiring it on and programming some parameters, all has done perfectly again. A vendor has comprised some extra instructions and the youtube video that has not been necessary these times but I wish there would have been him a first setting of time on my VFD, previously spends of the hours that read in of the forums like partorisca wire/programs it properly.
5 / 5
Law well with the 220V spindle. PMW 0-10v MACH3 works of good control. Justo manual perfect , of confidence , adds to cover thousands of settings. Has 3 CNCs all spindles and three of them have run this little utmost VFD. It loves it. The work adds
.
5 / 5
Has struggled to take control of the mine spindle by means of mach4 with a Huanyang VFD, included although the
spindle could be controlled invernadero an interface of operator of a VFD. I have found UCCNC and was able to have
complete control of a spindle with only 2 bosses that use RS-485. Some settings in a VFD was easy to do,
and as that more manual his explanation of each setting was quite clear. To good sure would recommend
this VFD for any type of engine. In fact now I have 2 of them, I will use one 2nd like the backup, or build another car.
5 / 5
Very better that an alone row terminal blockade knockoff that is coming with my spindle! Manuel detailed very better, and has come also with the addendum of alone page detailed that the frames that finds some place easy legislations!
4 / 5
My press to hammer at least three times like gain how was with only the engine of alone phase. Now a speed is infinitely variable and reversible, which is a lot handy to touch holes.
4 / 5
Sheerness, thickness, And the piece has commentary to do with this VFD.

Is going to the project that is not completed so that it did not try it.
5 / 5
We so only installed a unit and is doing. Also a vendor was has had to that to do with the tight delivery timeline and appreciate a support.
4 / 5
Bought this VFD partorisca drive the 2x72 grinder of tape. VFD Has arrived quickly and was very a lot of packaged. Creation, the construction and the component looks partorisca be quite good. It was pleasantly he surprised it that a VFD is coming with a long manual! Still although some of a tongue was bit it rough, all the information for any conceivable application has been coverage. Like this far a VFD has done perfectly. As has the a lot of 110V 3-ph engines and walks thus configuation is not that common, will order more.
4 / 5
My VFD so only left out of a magic smoke after the small to the long of the year. Randomly It began It to burst a GFI outlet.
4 / 5
We upgrade all of the our CNCs to some engines plus very big. A big plus 3hp the engine accepts the main bits that leaves to carve more for raisin. This box has come with all the parts have required to take our cars that career in efficiency of summit
4 / 5
the documentation looked well mine. All has done like this aimed in some diagrams and of the video resupplied. I have it it used it so only the month in the hobbyist the half and has done real well. Any complaint. The mine is having the habit to run a 800 water of watt has cooled spindle in a X-Carve car.
4 / 5
Has used this to run the spindle in mine cnc and do really well. It has arrived punctually and it was packaged amiably.
5 / 5
Adds VFD for a prize and was a lot quickly to answer with questions that has had. Very useful.
5 / 5
Easy to wire, manual of good instruction, now I just need to imagine was like this to take my rasperberry Pi Protoneer hat to control a spindle enable and the speed and I will be all has dipped. Perfecto VFD this in spite of cut spindle a lot very
4 / 5
Have the question with configuring a walk
Swimming in some manual coverages a @@subject
has Sent email to sustain and has taken at all retreated to frustrate especially of then are an electrical engineer
4 / 5
information Very populate and a lot of video that is supposition to do ,at least in some 4 hours have on he
4 / 5
Good instruction to wire and easy to program. The works add for mine 1 hp the engine has this in spite of @@giving need more horsepower. An engine has was to give the so prompt mine will purchase the engine the powerful plus.
4 / 5
Used this to power to 3 washing machine of engine of phase partorisca the project. The instructions are the pocolos imprecise, but works of units as it has announced.
4 / 5
Ossia A second VFD has bought. A prime minister was partorisca use in the Bridgeport milling car and this one east in the bomb. Compared to some other options this VFD is the value adds.
5 / 5
This a lot of very the truth maintains a lot well the force in the subject
5 / 5
The service adds in setup of vendor. It produces built well and manual of big instruction.

Top Customer Reviews: JET JBOS-3SA 3' ...

Rating: 4 out of 5 with 28 ratings
1 / 5
Ordered one 3' Spindle of Jet of Amazon after look in the number other sources. All match sources a spindle with the table inserts/to insert and calls it the box. Even so, the provider of the looks of amazon to listen is legitimate to ignore one inserts included although they use exactly a same picture and the description like all other sources of this product. Amazon, Of course, recoveries to be only the for-stander in a whole process. Netx The time simply will buy of the trafficker of legitimate Jet like Woodcraft.
5 / 5
This 3" spindle the assembly is substantially main, and heavier that some spindles duquel the levels come with a Jet Benchtop Osciallating spindle sander. An advantage to have the main drum is that it creates the flattest surface where a satisfied crown with a forest. This creates the smoothest surface in general pieces. Some small plus spindles this comes with a unit, field of one 2" down in a small plus ones, which are utmost to take in the corners the small plus etc, but in the big funds or the gradual bloated surface can create dimples in a surface if any maintenance a moving material.
IS one 3" spindle neccessary? No really, with the careful technician, can conform he with some small plus spindles, but to well sure he easier. Highly recommended.
4 / 5
Like Another active critic signified, although some shows of picture, does not comprise a metal inserts/inserts for a table. One inserts/inserts has to when being purchased elsewhere-explode taken of Jet. A spindle with inserting is by so pricey but to good sure useful for more sweeping curves. I guess it was not comprised with a machine to maintain a low prize a bit. You find spent in 60/100/150 grits of less than expensive sources that Jet.
1 / 5
Any one INSERTS/INSERTS! A photo clearly aims one INSERTS/INSERTS! Rasga Was to alert---does not take a whole element. So---you it does not take in in fact use a product or do so risk until purchase and inserts/to insert----

Before some naysayers attack me to estimate the product has not used----just that protects that they also could buy expect one inserts/inserts.
5 / 5
Only it take my assembly of spindle and was very impressed with him. In fact it is in accordance with the extraneous majority revises. It researches to be very done and has the be of sake in him.

Even so, when unpacked the, has looked for one that loses the table inserts/inserts. After investigation, discovered is optional.

While it admits that a table inserts/inserts is optional for the main pieces, the majority of is consciousness of security and would not consider to do with something concealed has posed our hands in danger. It IS my opinion that a table inserts/inserts well one has to bucks. I recommend that you order or also. (Jet 709539)
4 / 5
The desire avenges with a dish of throat and was the big plus bit. You have to order a dish of throat of JET directly. I am looking it advances to use east.
3 / 5
That is to say the pricy addition in a spindle of Jet sander. If it does not have the stationery tape sander, this has the big quite the diameter in sand embroiders directly. His unfortunate the jet does not comprise a table inserts/inserts with this element.
5 / 5
I wish a jet sander had come with east to begin with. It IS the good measure for curves of the interior the big plus. Work well with a cup of table sander.
4 / 5
Same quality like another spindles. It remarks that this does not come with a dish of face. It does not comprise why a dish of the face is not comprised with one 3' option of spindle.

Bought through Amazon in Tool of Acme. They were very wise to learn east has had to a place to face like the part of substitution and was able to order a esplacement breakings through them. A dish of the face only has the option of hole of the round, any slotted breakings of option for angled sanding. A number of the part of the Jet is 709539 (for a dish of net). You can find a number of part in a back page of the manual of an owner.
2 / 5
The addition adds my cup of bank of the Jet spindle sander. A sander does not come with this element.
4 / 5
This 3" spindle the assembly is substantially main, and heavier that a level spindles that comes with a Jet Benchtop Osciallating spindle sander. A goodness partorisca have the main drum is that it creates the flattest surface where a crown fulfils with a forest. This creates the smoothest surface in of the main pieces. A small plus spindles concealed to come with a unit, row of one 2" on down to a small plus some, which are utmost to take to the smallest corners etc, but in the big paving or the gradual bloated surface can create dimples in a surface if any maintenance an emotional material.
Is one 3" spindle neccessary? No really, with the careful technician, can fulfil he with a small plus spindles, but to good sure the easiest fact. Highly recommended.
5 / 5
Has ordered one 3' Jet Spindle of Amazon after looking in the number other sources. All the pair of sources a spindle with the table inserts/partorisca insert and call it the box. This in spite of, the provider of the looks of amazon partorisca feel is legitimate to ignore one inserts even although they use exactly a same picture and the description likes them all other sources of this product. Amazon, Of course, claims partorisca be so only the for-stander to a whole process. Netx The time simply will buy of the trafficante of legitimate Jet like Woodcraft.
5 / 5
Like another reviewers has indicated, although some shows of picture, does not comprise a metal inserts/inserts partorisca a table. One inserts/inserts has to that be purchased elsewhere-I mine taken of Jet. A spindle with inserting is for like this pricey but to good sure useful partorisca more sweeping curves. The guess that has not been comprised with a car partorisca maintain a prize down a bit. Has found bosses in 60/100/150 grits less than expensive sources that Jets.
5 / 5
Any one INSERTS! A photo clearly tip one INSERTS! Rasga Has had calm---to the alert does not take a whole element. Like this---calm any volume to in fact use a product or do like this risk until shabby and insert----

Before some naysayers attack me partorisca estimate the product does not have just----used that protects that they also could buy while one inserts.
4 / 5
Has received so only my spindle assembly and was very impressed with him. In fact it is in accordance with the majority of some other descriptions. It looks partorisca be fact well and has the well seat his.

This in spite of, when the unpacked, has looked for a missing table inserts/inserts. With which investigation, has discovered is optional.

While it admits that a table inserts/inserts is optional partorisca the main pieces, the majority of us is consciousness of security and would not consider doing with something concealed dipped our hands in danger. It is my opinion that a table inserts/partorisca insert a lot a ten bucks. I recommend that it order some hips. (Jet 709539)
4 / 5
resembles had been beaten in his house of way... Has frames in a side, but of then is in a cup, has not alleged. Quite beefy and heavy!
5 / 5
I desire is coming with a dish of throat and was bit it main. You owe that order a dish of throat of JET directly. I am looking forward to using east.
5 / 5
Ossia The pricy addition to a Jet spindle sander. If you do not have the stationery tape sander, this has the big quite the diameter the sand embroiders directly. His unfortunate the jet does not comprise a table inserts/inserts with this element.
4 / 5
Same quality like another spindles. It remarks that this does not come with a dish of type. It does not comprise reason a stuffs of the face is not comprised with one 3' spindle option.

Bought by means of Amazon in Tool of Acme. They were learnt really to know that you have had to take a place of type like the part of substitution and was able to order a esplacement leaves' by means of them. A dish to face so only has the option of hole of the round, any slotted part of option for angled sanding. A number of the part of the Jet is 709539 (for a dish of round). You can find a number of part in a rear page of the manual of an owner.
4 / 5
I wish a jet sander has had to come with east to begin with. It is the good measure partorisca curves of the main interior. Work well with a cup of table sander.
5 / 5
spindle assy. Well But there is not coming with a stuffs of adapter of the car like pictured
5 / 5
am a lot disappointed with Amazon partorisca sell this element, is the safty hazard , tip the table inserts/partorisca insert and does not come with him need one inserts... To the amazon would owe that verify the things were before selling them. This is not partorisca treat he in . They are a lot of J.
4 / 5
Has not comprised jet 3' the table inserts/inserts. It has to that go elsewhere partorisca take one inserts. It would be less expensive state to having purchased both together elements elsewhere. Amazon Usually a lot roughly looking for this class of what, but lost it on this one. Calm of course would assume 'assembly' comprised one inserts when it devises other vendors. A lot disappointed like the first client. Appearance be protected of this class of what for Cousin of Amazon.
4 / 5
Is the facts partorisca commission woodworking tent. This car is NO LIGHT CAR!! WAY BESIDES OUR EXPECTATIONS!!
4 / 5
This spindle is almost the necessity thus sander. It would owe that be comprised with a unit. It does not have one inserts concealed comes with him. The works add this in spite of. It used it so only at length in the project has built so only. Some real works have.
5 / 5
A vendor has failed to send a table inserts/inserts like this aimed in a photograph of product, has written the Amazon and has received any response. A photograph of an element aims three components and an ad informs to the box. It asks of Amazons for the evaluation the band has mentioned that a piece has been missing.

Walter H. Klaus
4 / 5
This box of the the whole different row of capacity with Jet your sander. Take this box, dipped your sander in the stand of stable tool, and then pat calm in a backside for a money has saved for not buying the model to walk sander. With this box, your sander faces the a lot of wider row of tasks.
When sanding smooth, Flowing curves (like a curvature in the bandsawn box, for chance), a diameter added of this piece maintains a sander of gouging troughs in yours workpiece.
Highly recommends it!
4 / 5
Is heavy and well has done. It comes with a sleeve. It was the wait to obtain . It looks to have the availability has limited. I add for

straight flanges. The sleeves are also hard to find another that of Jet.

Top Customer Reviews: Triton TSPST450 ...

Rating: 5 out of 5 with 1 ratings
5 / 5
Quality of typical utmost Triton. A lot of neighbour of extra bosses