10 Best Wrenches -

9,508 Reviews Scanned And Analyzed
BestReviewsTips logo max

Trending Wrenches Products

What is Wrenches?


Top Customer Reviews: TEKTON 1/2 Inch ...

Rating: 3 out of 5 with 30 ratings
1 / 5 Ahmed
I do in laboratory of calibration as when it take this torsion the wrench has taken he to do to verify if a precision was in fact 4%. A torsion the wrench has not been accurate in 4% in some fields some low plus. A torsion the wrench neither is properly varied so far like the readings go. It IS in fact 10FtLb on that would think in is when posed the. Only I am doing the 1 for 1 change for another wrench of torsion. Also I will be to try a walnut one this took to verify that I am taking that decrees of paid.
4 / 5 Tanisha
For gauge a precision of this torsion the wrench has tried he with AC/Delco Adapter of Digital Torsion and has compared he with the Accidents -on has possessed already. AC/Delco The unit has been certified to be in 0.3% of real torsion. A Tekton the wrench any one coming with the certification that mentioned for a bit, but has had only the adhesive this declares was 'certified.' Directly out of a box, a Tekton was wildly inaccurate, but after exerting it the bit, measure in an external field of 4% +/- specification. Generally it applies quite two in five percent too much torsion for a parameter, seldom applying torsion too small. Desprs Using it the moment, my observation is that it has to be exerted at least five times in 50% of max torsion before torquing anything. If it has been seating at night, exercise he again. Only it have to be this would have to when being done with wrenches of type of the click since is not mentioned in the manual of an operator. Compared in an Accident-in English tone, would say an Accident-on distributed more accurate and compatible results, without a necessity to exert it so frequently. Of course, some Clashes -in side quite 10 times so so Tekton. For a money, would say that it is the quite a lot of English tone of sake while takings for the exert before the use every day. It does not expect a spit and polishes of the Accidents -on. If you want to chrome, resplandor, and the arrival polished, will require to fall the little more dollars.
1 / 5 Joesph
I took this for first day and has done felizmente the substitution of brake in my so the truck decided in but this. An another the critics are well. The mine is come to look his state used before. Scratches And marked up throughout in an element. I can take on this. That can not take on this that the does not act! He no the click and I have tried included he in the parameter the low plus. I am disappointed and will be to return the. Perhaps you have you better luck
5 / 5 Audra
It take this wrench for torquing wheel lug nuts in some pertinent OEM torsion. This wrench is the small in 18 long inches and provides abundance of period in easily goes of torsion lug nuts. It IS the field adds for this application in of the normal-vehicles sized. It IS the righty-tighty torsion the wrench and the work adds for the this has bought stops. As Another has mentioned, some parts of bicycle are contrary of the levels that fo like the different torsion to beat of wrench that is required by east wants the to exit of a box.

Even so, an internal torsion the cape inserts/inserts can be flipped to do it lefty-tighty need . So while he wont work for bicycles other towers was-of-the-can do the boxes to do.

A case that comes with a torsion the wrench is well and mere and does a work to protect a wrench. Some instructions that is coming with a wrench was also useful. Included better, a box of wrench is come with the QR the form of code in that nexuss in the video of Youtube those aims to use a tool. I am very impressed with all of the same 'extra' useful material that Tekton provides. It remarks this class of extra devotion of Tekton in of the lines of multiple product. Down waiting for to use this wrench for years to come!

Pros:
Easy to use the wheel lug nuts
the instructions Add that accounts as to pose a torsion and uses a wrench
still the Mere useful case

Gilipollas:
Any one so far

Additional Considerations:
Be conscious of a torsion the proportionate field by a wrench! If I need 0-10lbs or &62;150lbs will require the different wrench.

In general: 5/5 stars (&62;=.5 round up, &60;.5 low rounds) =&62; 5 stars

Yes has any further questions regarding a product in my description pleases to leave the low commentaries and will return in you so harvest as it was possible.
5 / 5 Leif
I explode taken only yesterday and honestly is the bit has disappointed some looks of road, has published the few photos of a product and some two rays were in torsion duquel look (is that normal?). A cape has taken semence during the and the small piece and when being quite acute to cut me. Any one usually I bond the bad description but I have remained down in easterly a, expected to take more material of tekton but surely learn my lesson in of the tools in an internet. I will maintain it even so so that the does not like me to waste of my time that subjects behind.

Update 9/18/2015
has taken my substitution yesterday and is very satisfied in this Russ of Tekton has cured of of the this, asked as to return an another original element and instead to the left hang me on in him. It characterises it To you only it won another client and likes him said concealed active more in my list of desire under Tekton the product but I want to see like this vain transaction. I am not the big adherent of compraventa on-line but gave me to well sure the confidence these tools of orders of Tekton. He thank you for the service of client adds, has deserved now mine until it quotes 5 stars!
1 / 5 Jeanice
It has Had this for the little of the weeks have used to the only flu is when he goes to change a force of a torsion has to maintain an inferior tap these movements while changing a power. Also some parts of the sleeve of some subordinated the small easier that would like me out of of a box at all the small tight lock sings fixed but does not have to marks of need. In a picture or something is signalling the subjects separates too easy. Less than 30 pause of days. The cape has the harber debits in 3 years still in strong disposal. I will explode of guarantee and hope for the more if that or mamma too this the description will remain a same, and will be to change marks of wrench of the torch . Neither I have continued 40lbs before the the decree continued in a base for a lbs.
2 / 5 Lavenia
I have seen at all but amazing descriptions in this on-line wrench and during an internet. Always the law bounced the carts and other things have imagined at the end would choose in the torsion of wrench of estimativa. Well I , unit of is bought....

Very needless to say is completly unhappy in this compraventa so far. It take this wrench in mid 2017 and when being the element of the speciality has not taken around for the use until month later after a compraventa.

To start with the short 600hp turbo the cart of builds of tone, maintains and runs my self. I have required to substitute the canal to time so once has to clash out of this wrench for a first time. The tan takes in a premier of 3 work in torsions and begin to undress nuts in my bloc and breaking rays.

Huh That is to say odd perhaps was or rays of time. I take a work done and movement on blaming some rays.

Very my second time has required to substitute the clutch, torsion of paste at most of some rays and then vain to bend verify them all and some click in the torsion and another does almost of the half rotations before a tq the pause entered...... They have to it has been it already torqued a first time clicked was...

Very So I am beginning to think is a wrench to arrive to this point. As my necessities of dad in tq his lug nuts in his wheels. As I help him he in 100ft lb like recommended. 3 month later say me his wheel is shaking. Eye, the half of some rays is coming loose.

This POS beats wrench very same in lug nuts, the god forbidden I my bloc of engine and updates of value of piston $ 3,000 in the parts have been to do this weekend.

The decrease of long history am routing this POS backwards to expect is only the defective wrench. I am ordering the second with better hopes. But for now 2 Stars are all these taken.

If a second an is the rubbishes is by train of the give one and never look in this mark again. I will spend an extra money.
4 / 5 Shizue
I have purchased this torsion English tone in anticipation to do my AIR of premier tez. Apresamiento Almost 2 month before has all some separates required to pose joints an upper receiver and at the end uses this torsion English tone for a first time. I have posed a foot of raven in 90 and has begun tensed some nuts of barrel in 35 ft. -lbs Of the torsion and he clicked ( this far, also'). Exchanged On in my bar of breaker and loosened some nuts, then upped a pose of torsion in 45 ft. -lbs - At all. I have tried to apply more quite - at all. To arrive to this point am not sure am doing something bad or a wrench has prendido to do. As I am fallen a torsion in a parameter a low plus - still any click. To arrive to this point some nuts was so torqued down, my bar of breaker has begun to angle under a pressure in loosen some nuts again. So much with a nervous fear to break some nuts of my no-so-cheap upper receiver, has to use east maintaining defective tool to tense a cm of nuts of the barrel for cm (not knowing yes has surpassed a maximum 80 ft. -lbs), Until I had it properly timed.

UPDATE (5/28/17)
has contacted TEKTON support dept saw the email likes suggested and has to say that I am very impressed for his service of client. They were hurriedly to answer in my initial email and each followup. A guarantee has been honoured in any cost in me and I could not be impressed more. I plant the plot to estimate on maintains of client (compraventa special of clave) and has the roads adds of respect for any company that is because of the be by behind his product. My first wrench can have has had subjects, but has to respect the company that publicly characteristic (and standby), 'TEKTON the tools are Always Guaranteed... Our guarantee does not have any limit of time and any impression of final...' For that, has had to 3 stars
1 / 5 Angel
In the principle has bought this in 2016 to tense the nuts of new yoke in my motorcycle. Work well; I have listened a click in a pertinent parameter. Any sure what accurate was but the supposition was good to go based on all some big descriptions.

Today for a second time in two years, has required the torsion English tone. It has had my Tekton has tent in the cupboard in his protective case and in a torsion of plus goes down this poses so for the instructions of a manufacturer. I have required 10 ft lb torsion (the parameter the low plus in my wrench) in torsion two arm of change spools. In a premier, avenges very afterwards to undress a ray, and has not listened never the click but decided for prender before it takes totally undressed. I blamed me and the supposition there has been my allen bit in an angle.

In a second spool has twisted dulcemente a wrench and again, any click. That At the end has listened it to it was a ray that is sheared down the half.

Was able to twist a broken the averages out of an arm of change, but there is some harm in a black painting of an arm of change in the 2018 Yamaha R6. I go to try to take a company that marks a spools the road two rays more, in a case was his hardware , but has ordered the different mark of wrench of torsion to try. Has the feeling is a wrench that has caused a subject, that very some 1 descriptions of star mention sheared rays and a wrench any clicking or acting arrest very very time. And this felt marks . It IS $ 35-40 and fact in Asia. If you want the mechanic of torsion of wrench of the quality probably has to man up and paid at least $ 150 for the CDI or $ 500 for the Accident On. I have bought this cause is not the mechanic of full time, but enough does not have the English torsion key that has a can not trust not destroying my vehicles.
5 / 5 Nancy
A plus and more uses these TEKTON tools, a plus as me. I have taken this wrench in the canal of the calibration in of the works. His in 1% of torsion of place, and after it use for enough three solid of hours, maintains his calibration. Wonderful for a prize, was amiable of the sceptic when bought the. Also have his 20-200 pound of torsion of inch the wrench and does a same like east unit

Pros-
--Very has Built. A lock in a cape has the positive taking and does not avenge loose once poses it.
--Different a lot of cheap tools in Amazon, this wrench is very built and some numbers of cape is easy to read.
--The metres of newton are printed in a backside of a wrench (a bit the stairs is Ft.lbs, has said he on, the metres of the newton.)
--'CLICK' positive when preset the torsion is achieved. Any toneless click here.

Gilipollas-
--An only one could think of era some scales is etched ash in a cape. It can be the small difficult to read after awhile, or for any one with poor view.

In general, adds torsion English tone!
5 / 5 Twanda
I do in laboratory of calibration like this when I have received this torsion the English tone has taken he partorisca do to verify if an accuracy was in fact 4. A torsion the wrench has not been attentive to 4 in some lower rows. A torsion the wrench neither is varied properly according to which the readings go. It is in fact 10FtLb on that it would think it to it in you would be when calm dipped that. So only I am doing the 1 partorisca 1 transmission partorisca another wrench of torsion. Also I will be partorisca try a new one that has received partorisca verify that I am taking that partorisca of has paid.
5 / 5 Amado
Has taken this partorisca first day and felizmente has done the substitution of brake in my like this decided truck to but this. Another reviewers is well. The mine has come partorisca look his summer used before. Scratches And marked on throughout in an element. I can take on that. That can not take on is that it does not act! He no the click and I tried it inclusos in the dipping the low plus. I am disappointed and will be to return the. Calm perhaps will have better regime
4 / 5 Ola
For gauge an accuracy of this torsion the English tone has tried he with AC/Delco Adapter of Digital Torsion and has compared he with the Snap-on has possessed already. AC/Delco The unit has been certified to be inner 0.3 of real torsion. A Tekton the wrench there is not coming with the certification likes mentioned by some, but has had so only the sticker that declares was 'certified.' Directly out of a box, a Tekton was wildly inaccurate, but after exerting it the bit, measure in an external row of 4 +/- specification. He generally applied roughly two to five percent too much torsion for a setting, seldom applying torsion too small. After using it the moment, my observation is that it have to that be exerted at least five times in 50 of max first torsion of torquing anything. If it has been seating at night, exercise he again. Calm so only has to that know this would have to that be fact with wrenches of type of the click of then is not mentioned in the manual of an operator. Compared to a Snap-in English tone, would say a Snap-on distributed more attentive and compatible results, without a need to exert it like this frequently. Of course, a Snap-on cost roughly 10 times like this like this Tekton. For a money, would say that it is the quite good wrench while memories for the exert first of the use each day. It does not expect a spit and polish of the Snap-on. If you want to chrome, resplandor, and arrive it polished, will require to fall the little more dollars.
5 / 5 Cherly
Has seen at all but amazing descriptions in this on-line wrench and during an internet. Always doing bounced the cars and other things have imagined finally would choose on the estimativa wrench of torsion. Well I , has bought is one.....

A lot of needless to say are completly unhappy in this compraventa like this far. It take this wrench in mid 2017 and when being the element of the speciality has not taken around for the use until month later after a compraventa.

To start with circle he 600hp disturb transports of clue I build, maintains and run my self. I have required to substitute the canal to time like this once the fact has had to break out of this wrench for a first time. It likes volume to a prime minister of 3 work on torsions and begins to undress edges in my blockade and snapping rays.

Huh Ossia Odd perhaps was some rays of time. I take a work done and movement on blaming some rays.

A lot My second time have required to substitute the clutch, has torsion of paste in the majority of some rays and then go to bend verify them all and some click in the torsion and another does almost of the first half rotations of a tq the pause goes in...... They owe that it has been it already torqued a first time he clicked was...

A lot So I am beginning to think is a wrench to arrive to this point. As my needs of dads to tq his lug given in his wheels. It likes help the to 100ft lb like recommended. 3 month later say his wheel is shaking. Eye, the half of some rays is coming loose.

This POS tin wrench very same in lug dice, the god forbidden I my blockade of engine and piston upgrade value $ 3,000 in of the parts were to do this weekend.

To cut of the long history follows to send this POS retreated to expect is so only the defective wrench. I am ordering the second with better hopes. But for now 2 Star is all east taking.

If a second an east of the rubbishes are by train of the give one and not looking never in this mark again. I will spend of the extra money.
5 / 5 Louie
Has taken this wrench for torquing turns lug dice to some pertinent OEM torsion. This wrench is the little on 18 thumbs long and resupplies abundance of period to easily the torsion goes lug dice. It is the row adds for this application in normal-sized vehicles. It is the righty-tighty torsion the wrench and the work adds so that it has bought partorisca. As another has mentioned, some parts of bicycle are opposite regular threading like the different torsion the wrench can be required for quell'love it to him to exit of a box.

This in spite of, an inner torsion the boss inserts/inserts can be flipped to do it lefty-tighty has required. Like this while he wont work for bicycles other lathes was-of-the-the boxes can be done to do .

A chance that comes with a torsion the wrench is good and simple and done a work to protect a wrench. Some instructions that is coming with a wrench was also useful. Included better, a box of wrench has come with him QR the code has printed in link it to the video of Youtube that tip to use a tool. They are very impressed with everything of this 'extra' useful material that Tekton resupplies. There is remarked this class of extra devotion of Tekton in lines of multiple product. Down waiting for to use this wrench for years to come!

Pros:
Easy to use to tire lug dice
the instructions Add that explains like this to dip a torsion and use a wrench
still the Simple useful chance

Gilipollas:
Any like this far

Additional Considerations:
Be conscious of a torsion the row resupplied for a wrench! If I need 0-10lbs or &62;150lbs will require the different wrench.

In general: 5/5 stars (&62;=.5 round on, &60;.5 round down) =&62; 5 stars

He has any further questions regarding a product in my description pleases to leave the commentary down and will go back your like this collected to the equal that was possible.
4 / 5 Gisele
Has Had this for the few weeks used it the only flu is when you goes to change a force of a torsion has to that maintain an inferior tap that movements while changing a power. Also a boss separates of a subordinated the little easier that would like me out of a box at all the little tight lock cant fix but would not owe that require do. In a picture one something am signalling to separates way too easy. Less than 30 pause of days. The boss has the harber uploads on 3 years still in strong disposal. I am going the mine of guarantee and hope for the more conceal a sucks too much this description will remain one same, and will be to change frames of wrench of the torch . Neither I am gone in 40lbs before it takes that it wants to presionar in a base for a lbs.
4 / 5 Ty
I mine taken so only yesterday and honradamente are the bit there is disappointed some looks of way, I posted the few photos of a product and some two rays were in torsion that look (is that normal?). A boss has taken scratches during the and the small chip and feels quite acute to cut me. I a lot usually stick the bad description but I is remained down is one, expected to take more material that tekton but surely learn my lesson in tools in an internet. I will maintain it this in spite of reason does not like to squander of my time that sends it behind.

Update 9/18/2015
has taken my substitution yesterday and are really satisfies on like Russ of Tekton has cured of of the this, has asked as to return another original element and instead to the left hang me on his. Calm the types have won so only another client and likes has said that have more in my cast to wish under Tekton the produced but I want to see like this the transaction goes. They are not the big defender of compraventa on-line but gave to good sure the confidence that tools of orders of Tekton. It gives the graces for the service of client adds, has deserved now my up to date 5 stars!
4 / 5 Alisha
Has purchased this torsion English tone in anticipation to do build of AIR of prime minister of mine. Taking almost 2 month before I have had all some parts have required to dip joints an upper receiver and finally use this torsion English tone for a first time. It has dipped a foot of raven to 90° and has begun was that presiona a die of barrel to 35 ft. -lbs Of torsion and he clicked ( concealed far, like this a lot'). Swapped In my bar of breaker and loosened a die, then upped a place of torsion to 45 ft. -lbs - Swimming. I have looked for to apply more force - at all. To arrive to this point am not sure am doing something wrong or a wrench there is prendido to do. As I have fallen a torsion to one dipping a low plus - still any click. To arrive to this point a die was like this torqued down, my bar of breaker has begun to bend under a pressure to loosen a die again. So much with a nervous fear to break some edges of the mine no-like this-economic upper receiver, has had to use east maintaining defective tool for presionar a cm of die of the barrel for cm (not knowing yes has surpassed a maximum 80 ft. -lbs), Until I had it properly timed.

UPDATE (5/28/17)
has contacted TEKTON sustain dept has seen the email likes suggested and has to that say that I am very impressed for his service of client. They were quickly to answer to the mine initial email and each one followup. A guarantee was honored in any cost of the mine and I could not be impressed more. I situate to plot to estimate on service of client (compraventa special of estaca) and have treat adds of respect for any company that is has had to that to be for behind his product. My first wrench can have has has had subjects, but has to that respect the company that publicly state (and standby), 'TEKTON the tools are Always Guaranteed... Our guarantee does not have any time limit and no impression refinada...' For that, has had to add 3 stars
5 / 5 Suzie
originally has bought this in 2016 for presionar the die of new yoke in motorcycle of mine. Law well; I have listened a click in a pertinent setting. Any sure the one who attentive is but has assumed was well to go based on all some big descriptions.

Today for a second time in two years, has required the torsion English tone. I have had mine Tekton has tent in the cupboard in his protective chance and in a torsion of low plus that dips so much for the instructions of a costruttore. I have required 10 ft lb torsion (the dipping the low plus in my wrench) to torsion two arm of transmission spools. In a prime minister, avenges a lot of neighbour to undress a ray, and has not listened never the click but decided to take before it take entirely undressed. I blamed and it has assumed I have had mine allen has bitten in a corner.

In a second spool has twisted dulcemente a wrench and again, any click. That has listened finally was a ray that is sheared for the half.

Was able to twist a broken the averages out of an arm of transmission, but there is some harm to a black product of an arm of transmission in the 2018 Yamaha R6. I go to try to take a company that marks a spools to send two rays more, in a chance was his hardware , but has ordered the different mark of wrench of torsion to try. Has the feeling is a wrench that has caused a subject, likes quota of some 1 descriptions of star mention sheared rays and a wrench any clicking or acting arrest very long. And that feels frames . It is $ 35-40 and fact in Asia. If it love the mechanics of torsion of quality the wrench probably has to that man on and has paid at least $ 150 for the CDI or $ 500 for the Snap On. I have bought this cause are not the mechanic of full time, but enough does not have the English torsion key that has an I can not trust the not destroying my vehicles.
4 / 5 Sid
A plus and more uses these TEKTON tools, a more like me. I have taken this wrench to the canal of laws of calibration. His interior 1 of torsion of place, and after using he for roughly three solid of hours, maintains his calibration. Wonderful for a prize, was bondadoso of sceptic when I bought it. Also I have his 20-200 pound of torsion of thumb the wrench and extracted one still like this one.

Pros-
--A lot has built. A lock in a boss has the positive grab and does not come free calm the the once put.
--Different a lot of economic tools on Amazon, this wrench is very built and some numbers of sleeve are easy to read.
--I metres of newton are printed in a backside of a wrench (a bit the stairs is , toe he on, Metres of Newton.)
--'CLICK' POSITIVE when preset the torsion is achieved. Any toneless click here.

Gilipollas-
--An only one could think of era some scales is etched ash to a boss. It can be the little difficult to read with which awhile, or for any with poor eyesight.

In general, adds torsion English tone!
4 / 5 Arletha
It does years, the looks likes him a lot of of the few instructions partorisca project comprised 'torsion specs.' Well, to to recent projects like to install the trailer hitches in my cars and installing the wheels in mine trailer of boat has done clear that the pertinent torsion is of entity.

Originally, has purchased the wrench in my tent of local box of his line of tools. It can not look to take a wrench the 'pause,' and has been concerned roughly applying too much torsion. I am returned a wrench to a tent and the employee tried it on the ray that shelf of ancore to a paving of tent. It breaks a ray of a paving! Needless Partorisca Say, has not annoyed partorisca change it, is simply is returned.

Done of the years, Craftsmen the tools have sold for Sears was my gone to. But, a next collapse to Sears and an agriculture of almost all Craftsman the manufacture the Chinese left unimpressed. So much, that to do?

Snaps-In the tools look of confidence, but is way too expensive for mine 2-3 projects the year that could the torsion English tone.

Finally, some descriptions in this Tekton the wrench sold.

Has impressed extremely with a tool. Investigation be done to last the lifetime, has no plastic on that. Steel of just big quality, etched gradients that will not spend never was, and feel to one 'action of stops' those so many attentive and precise looks.

A box of storage is one 'folding plastic hinge' type that finally pause. If they had launched another buck or so the pertinent hinges, a total container would be perfect.

Of a tool is one the majority of what of entity here, am giving these five stars like this the wrench is the phenomenal to buy of my experience.
4 / 5 Janelle
Has broken after only the few noises to grind when changing put of torsion, and no longer click when torsion the setting is achieved. Unbelievable.
5 / 5 Amanda
Excellent torsion English tone and an excellent value. Originally, I have purchased the $ 10 Pittsburgh Wrench of Torsion of Load of Port; this in spite of, have been concerned in an accuracy of this product as it does not avenge with any certification. Of then it do in mine Mazda 3 suspension, am coming to a conclusion has not been to value my security or a possibility of on torquing the ray. For like this, I am spent an extra $ 30 and has purchased this Tekton which has been given several positive critiques on Amazon and in an internet. More importantly, avenges with the certification that declares was has tried properly.

A Tekton was easy to use, a markings was clear, and do the solid, audible click when a pertinent torsion has been fulfilled. It feels solid and well has done. Also I seat sure that the wheel will not be that it falls off my car anytime punctual. If you are in a phase for the good torsion the English tone in the value adds, this would be a one for you.
4 / 5 Rodger
Has Come averts during being used a first time. Well out of dating to return of course!
To the equal that require to torsion some dice of wheel for the 900 walk of one thousand, has had to rush averts to Port Frieght and purchase the tool.
Very sure as to do with a Teton now.
Has contacted Anazon - his IMEDIATLY has issued the entrance of turn!
An aberration in the tool does not condemn him everything.
.An useful turn for the faulty element - well out of a period of turn of regular date - concealed says to plot. Thank you Amazon partorisca to sustain the client 😊
4 / 5 Boris
the hate gives a star, but here is my description of Tekton the torsion produced of wrench:

has purchased two wrenches of torsion, 3/8' and 1/2' walk.

Has received one 3/8' first walk. After reading critical descriptions, decided to try it. After reading a manual, tried it on the ray in my office of piano! I have crossed an edge, has not listened never the sound of click.
Tried it on the ray in my car, he never clicked included when it was dipped to a torsion of LOW plus!

Is returned.

Has received then a second a TEKTON 24335 1/Walk of 2 Thumbs.

Of then had planned to substitute the Coverage of Valve Gasket in my car, has expected really these wrenches that was to suppose to do. Especially of a metrics specs matched exactly to a specs of some rays have required.

Anyways, A second a left me down too much! Have has had expectations really big and of the hopes in these wrenches. But any of them has done! For some reasons I supposition has received it faulty one.

Has had to extend a work of reparation to two days, has squandered my time, and has broken my office of piano.

Has not loved to think that both were defective, this was really odd. So much the headed in a tent of part of the car, and has taken the torsion English tone of them, the little hard to convert a specs to Nm, but t has done perfectly well! I have examined a Tekton English tone with a ray still has presionado with an informative wrench, and tries that a wrench is faulty.

Was able to listen a click when I have used a torsion English tone of tent of part of local car, but a Tekton never clicked!

So that they are doing his investigation to purchase this, please the calm mark sure tries it on something economic first of the use in your car. If possible, it goes your tent of part of local car, take loaned his torsion English tone, and use like this simultaneously to ensure a Tekton the works eat to suppose to .

A bit fallido with some results of finals, cause of harm, waste of time, and extra $ $ has had to pay !
5 / 5 Clarinda
Ossia The quality ADDS torsion English tone for the fraction of a prize of the SnapOn or another mark of name. And I think that that it is like this good. Look, For $ 40 does not go to take the tone of English torsion that that can be has used 10 times the day and beaten up in a process and have hard the lifetime - as the SnapOn. But for $ 40 CAN take YOU the wrench of torsion of good quality that can use you occasionally with the excellent results and can/ will last you the decade or two. If you do not have the money that burns the hole in your pocket, buy this torsion English tone.
4 / 5 Mercy
Very impressed !! Doing to plot of work of car. It has done only brakes and has done nto wants to guess take my brake caliper rays behind to a bit near of any torsion corrected. It take a 1/2 thumb the wrench and I could go in and in mine callipers of brake. Entirely read some instructions, r,that the ember does not dip it was presionado and before tests torquing the ray, those some instructions say and practical. It has dipped the die and ray thru the hole in shelf of mine of metal has presionado bite it manually then dulcemente presionado until it seats a esuddle click' some instructions have informed to. I have not taken the calm long transmissions on would owe that presionar dulcemente especially to the equal that go more reason be any partorisca of car or clutch pause, but was quite easy to take immediately when it seats a click . Like the others the descriptions has both ft-lbs (which is really lbs-ft) and newton - scales of metre. His quite big wrench, the bar of giant breaker but does not use it like this one. Like the practice I just use this to torsion, any for presionar. I used it once to help break the free die but wont do the practice out of him. I compared it to one in a tent of big box, sweats 1/2 torsion the wrench was more than 2x cost and was far main and agrees has said that this was enormous. This can not be upper of a line but is very very built, sturdy and very of confidence and especially extremely point of attractive prize. They are very happy with him and comes with him súper sturdy chance to have to that heavy, can fall material in a chance and your wrench will be well. But really a lot that. Also it uses for torquing my wheels to correct ft-lbs, included if it does not brake his value he for that. No presiona lug given with the bar of breaker or big ratchet. His all be uneven and you warp your rotor and your finally pressed brakes. A half specification on rotor runout is roughly 3 one thousand. Like this calm really need this for your wheels.
5 / 5 Pauline
Is skookum. Has the stairs of the calibration in work has been using this in place of big torsion for roughly three days anywhere of 65 to 160 and has been the verifying in our stairs and is very inner 4 that honradamente is a lot enough. A lot readable. It looks the stainless or at least he ceracote stainless but am quite sure is stainless steel of the big note. An action of adjustment was rigid for the moment, is taking smoother.
Tekton Is the company of EUA that the big agreements finalise very very said of Taiwan and some the EUA. It is legit undertook. Has the tonne of his tools dispersed during my material. I have been one TAKING the Master technology Certified for almost 30 years. Utilisation the one who works, and if this no the world-wide havea crap description.
The boss of ratchet is very solid, attended take at least the decade out of him. I have finalised in fact buy one 3/8 and 1/4 also with which take this . Initially rings the type of new beam 1/4 to dip on difs and has seen this. I finally killed a boss of the mine old Craftsman ossia declare used and constantly aforado for 20 years.
4 / 5 Emerita
Roughly done eight years, has purchased my first dual suspension highland bicycle of edge of carbon that also has the handlebar of edge of the carbon and seatpost. Have enjoyed a bicycle so much, has purchased another for all the mountain that traces the few years later and then, last year, one for my woman. An only question with bicycles of carbon this in spite of (or edge of carbon in general) is that you have to that be very careful when torquing components because the carbon will not deform like the metal that is in stressed. The edge of carbon is extremely sensitive to signal stress and load of compression and surpass a torsion the limits of a material snap or fracture suddenly (often, without an owner that comment). And ossia where a Tekton 24335 goes in. This 1/2 thumb socket to walk torsion the wrench is ideal thus 13 to almost 203 Metres of Newton (Nm) diverse concealed applies the main fasteners in the highland bicycle (likes a group inferior and freewheel), and to do the undue stress sure is not when be applied to a frame of edge of the carbon or components.

Mina Tekton 24335 wine so only fines the week after ordering , and has received to grieve my wrench, dipped that up in my aims to do a test of accuracy. It has attached the plumb hanged (of known mass) of the series in an end and has begun dialing a coverage to close retreated down to 90 Nm (66.3 books of feet or 796 pounds of thumb), until a weight he has clicado. You verify to see he clicked in 90 Nm, reason ossia the little has bitten on that it would be it require for cups grupal inferior sure. I have then measured a distance (of a centre of a walk to a centre of a boss where a series has been joined that resists a weight) x hanged I used and then converted to Metres of Newton, and has compared that to a setting in that there has gone clicked. It results a Tekton 24335 is attentive to 0.8. This in spite of, this type of torsion the wrenches are more attentive when an inner cradle is extended that when it is relaxed, as he far plus 1 or 2 correction could be order any way. ( You have to that consider dynamic versus static uploading when directing testing) Still, he deviance of only 0.8 is very inner 4 Tekton claims and is very attentive for the torsion English tone in this row of prize.

A Tekton 24335 also has some characteristic well really joy. Some stairs impresa in a boss is easy to read. A knurled the boss is easy to resist and is solid steel more than a plastic of some other wrenches of torsion. Also, one feels of a Tekton 24335 is much more intuitive during the dynamics that uploads and when you achieve a limit in plant of torsion, a click and swivel of a boss is acute, strong and easy to remark because of a rolling of pin of the roller in a roller that resists. Ossia The welcome characteristic when you are wrenching and torquing multiple fasteners quickly. In general, a Tekton 24335 feels big-final and has the big quality of construction with more the steel has used throughout compared to a lot of competitors. To top it was, a Tekton 24335 has the port in a centre of a main iron for resetting retreats to 100 accuracy with which uses for several years. (Or, I abuse you) to to An only appearance does not like on a Tekton 24335 partorisca of use of bicycle at least, is that it can no record torsion in both directions (for rights and to the left has to that rid edges). This has said, in of the modern bicycles, typically calms so only find to the left has to that rid edges in three places; a sinister pedal, a cup of right grupal inferior and a freewheel cone.

And finally, has a prize. A Tekton 24335 sells for $ 38 compared to $ 70 to $ 250 paralizaciones very other competitors that is similarly has built. Ossia Simply the enormous quantity of difference and when you combine that with a fact that a Tekton 24335 is like this attentive, to choose a Tekton easy.

Like this far, has had mine Tekton 24335 for roughly seven month and used it a lot so only in my bicycles but also with some work of light car, and a wrench has been both attentive and has treated superbly. For me, this equals five stars!
5 / 5 Genevie
In the first place, will say that I have been blown was with a quality vs. Point for of prize Tekton tools. After buying the house, is dulcemente state (any second my woman) that adds/upgrading my tools and Tekton is resulted the gone to. With this said, a 1/2 thumb torsion the wrench has arrived to the look had been that strikes around any one is tent for the weeks of the pair like other descriptions has mentioned. No material have received the product used or fraction, but an arrival leaves the small to be wished. I have bought Tekton 1/4, 3/8, 1/2 conjoint socket and 1/4 and 3/8 torsion wrenches on his other tools all of the amazon and all has looked the new mark/polished and has done perfectly like this far. It thinks my experience with an arrival in this 1/2 thumb torsion the wrench is an anomaly , but the value that the commentaries of then is compatible with other descriptions. This in spite of, will not doubt to buy Tekton in a future to the equal that thinks that that they are the tools add for a serious house DIYer.

Top Customer Reviews: Wheeler Firearms ...

Rating: 4 out of 5 with 40 ratings
5 / 5 Odis
Those products add and the subject fell. This nifty torsion the screwdriver is priced lower that some other similar products, but any voice as it can be any better. That is to say easy to pose up and takes a guesswork out of taking only a right torsion in band, especially for gunsmithing work. Word of precaution even so. You have seen several videos of Youtube in east produces those aims that tense the ray until you listen the click, has entered by behind an opposite direction and torsion he two times more. Some Wrench of instructions of Fat clearly be that this is not the ratcheting tool and into use only in an in a clockwise direction towers of direction. As you listen a first click, continues to turn in an in a clockwise direction direction until you listen two clicks more for pertinent torquing of rays. Also, mark sure in untension the before storing was.
4 / 5 Abigail
I have chosen a version of equivalent in a digital version so that a digital version any click and the turn free when achieves a torsion has wished. In a digital, has to read some numbers and turn of the decree when apresamiento in a parameter has wished. This looks also complicated in me, and I like a click to satisfy when achieves a torsion has aimed with easterly unit

Ones a down the side in a version of equivalent is concealed has to pull down you and turn an inferior point to pose a tension, and apresamiento a lot of turns to take in some big parameters. Any one on age of the roads, but is recommended in dial behind in zero and falls a tension before the tent after using. As I am supposing that the big advantage of a digital version is that it does not have to do this adjustment before and after it uses. Still, I am chosen happy an equivalent in a digital.
5 / 5 Awilda
Wheeler IS a Torsion the wrench is arrived today, and used it to locate my Leupold VX-2 in my Ruger Mini-14 Aim, with RM Ruger 1 and 77/22 1-down the half Ext Points. I have read enough the few descriptions, and was the small preoccupied quite like law, but law perfectly. I mention some exact points, so that one of a esalquitrn' the bits have distributed apt perfect for a cup 4 mountain of clean rays. It was able in dial the in 28 in-lbs for these points of particular scope, as well as 45 in-lbs for some rays these mountains the in a rifle. Sper Easy to use, clear instructions, calibration info, and comes with the case takes with void for all some bits. Phase of worse case, is will require the paste above Debits of Port, Autozone, Sears, etc to choose in the small bit has posed. Trace my rifle perfectly, and is surer to know that a correct quantity of tq has been applied in the each ray. To well sure recommend it.
4 / 5 Kraig
I have ordered this engine of torsion down torsion some connectors have meant to join bake and wiring of aluminium. According to a gauge of the cape has required the engine that could do 10 or 15 pounds of inch, a description of this element suggested it would have to do only sake. It arrives only the little the mark of hours and is already in a process the container he until returning it. In a pound of 10 place of inches, he only the clicks can not direct the ray at all. In a 15 book of place of inch, literally is not quite strong of the turn enough takes to do a torsion the mechanism engages, only continues to direct.

A reason I marvel if the mine is fake , is still although a packaging was sealed still up, had Any manual of instruction of any class in a container; but I photos of view in other descriptions of a real manual... I have rid a demand of change with Amazon as we will see one 2 one is any better...

ORIGINAL INDICATION: 1 Star.

UPDATE: 10/12/2018 - I took my substitution of Amazon very hurriedly after ridding my turn. It uses a substitution for 4 different tasks so far and has done while it have expected . My second unit has comprised the manual as well as the certificate of calibration, both duquel has not been to present in the packaging of my first unit. It updates a description in 4 stars to reflect my global satisfaction.
5 / 5 Adele
If that is to say your first use of the total torsion of wrench or reassembling the firearm or accessory of firearm, included, yes has, while I have done for years, supposition in him and think you was in right, thinks again. Using this torsion of quality the wrench is to educate you that your touchy-cost-reads the system is not quite so accurate while the crude that that was it. In yesteryear, touchy-cost-reads has been adapted. With some firearms of precision and accesorias of today, is only very acceptable. For maximum action out of your firearm, all precise fatality in a money and with accuracy torquing some rays and the nuts are very of entity. It tries a product, only can me join be illuminated in some profits to tense rays of firearm in any pertinent torsion with the quality and wrench of accurate torsion. I say me -Products of tent simply any one , when the precision is of vital weight to enhance maximum action.
5 / 5 Lowell
Any one often said I 'amour' the Chinese tool done because of the quality emits the majority has. That is to say the engine besides torsion that the wrench and comes with a proportionate of bits; the majority of that is not a better party for a Mosin (Russian), SKS (Chinese), and AK-47 (Russian) but has the big together of gunsmithing bits to write this change only well. It does not blame Wheeler for the one of the east but tolerances of loose and practical manufacture during a war. You will find the in a Brownell is catalogues. The wine with the plastic case has adapted these wineries all plant firmly. That surprised has been the slip of the certification of the test has comprised in a box. It attaches pix of a manual the things of account of the help. My unit takes a bit more take to turn so posing increases as it maintains anything those slips out of him. It finds the pair of gloves of the help of thin nitrile take me the good grip with my big hands and of the toes. Compared in the inch aforada-torsion of wrench of book, a device was very inner +/- 1% of a real reading. The low mark, am bragging in the tool has done Chinese.
4 / 5 Latrice
I have wanted the engine of torsion of applications of sure ray, and chooses this for $ 40 bucks. I am familiar with Wheeler these Builds and like his material. This investigation be the a lot of of the product has done well with bits of big quality while you would expect of Wheeler. My only problem with this together is a small gauge that marks dialing in your torsion resolves precisely kinda difficult.

The small stairs and the big/fat line he hard to be precise in the parameter. I am sure he is only sake for my application and of use, but yes'n had it to do on, can pony in an annex $ 16 bucks for a digital version. The trade has been with digital is fussing with stacks tho. It maintains that in of the imports.
5 / 5 Eulah
Read each a 4-5 descriptions of star. They are in accordance with. I have bought this for a purpose and a purpose only, to locate my scope in Saint AIR-15 using Larue QD LT104 points of scope. The calm does not want to scrape this up, so that these costs of the mountain on means as much as the plot of scopes very good. After the hammer of laser that dress and levelling all has used a Wheeler in torsion some points according to a Larue specifications. Piece of cake. If you go to locate your calm scope, he well with some pertinent tools like a Wheeler and the date of support of good laser sighter, rest of rifle or aims, and German level (is sold in Amazon), or take he in your venue gunsmith. Admitted, comes with the set has limited duquel the bits probably will do in 80-90% of some applications, but accepts each an another, which also can buy in Amazon. Yep, Done in China. As that. It IS work and material sake . Highly recommended.
3 / 5 Magaret
A good of wrench of looks and has done a work to tense but his no built for loosening so that it sing it to you taken any advantage in the screwdriver likes pode the rachet. Also some bits...Those marks and say this politely? Well here they go it... They suck. I have twisted a T25 bit in three bren. It was in a truck and has taken my dewalt the bits and was easy peasey. Any insurance that coast of the quality when goes in this type of boxes of tool but and would say for $ 50.00 and the better results expected in my first project. And it recommends this tool? Yes it has had you only $ 50.00 to spend then he a work. And Use this daily tool? Any one and would opt for the rachet type with quality Dewalt bits.
4 / 5 Gayle
Tool very handy and afterwards to perfect. It avenges with the case, certified of the calibration and some have suggested parameters of torsion for several measures of ray, and enough each common bit will require calm for mountain of scope. I have found some parameters of torsion suggested to be the bit in a big side, especially for points of aluminium. It falls the for 15% -20% for nuts of aluminium. A click is very positive... Basically a bit of the cape gives was totally when achieves a torsion has wished. Very good and very compatible. A big grip is ergonomic and give you abundance of advantage.

An only reason is not the indication of 5 star is a creation of a dial of adjustment. Step of the gloves of nitrile when law in pistols, and a dial does not give you very a lot of to line in. If has the small oil of pistol in these gloves [or tame] and has to exited in 50+ in/lbs, has some the low work was since you. A lot they require to attach the grippy rim in a cup of a dial for this product to achieve perfection.

Nevertheless, is happy with a compraventa, and happy to leave a work of supposition behind.
4 / 5 Sheldon
Those produced add and the @@subject to kick. This nifty torsion the screwdriver is priced lower that some other alike products, but does not see like this can be any better. Ossia Easy to dip up and takes a guesswork out of taking so only a right torsion in rays, especially for gunsmithing work. Word of precaution this in spite of. I have seen several video of Youtube in this product that shows that presiona the ray until it listen the click, behind is gone in an opposite direction and torsion he two times more. Some instructions of the Fat wrench clearly state that this is not the ratcheting tool and to only use in a clockwise direction towers. As you listen a first click, continuous turn in a clockwise direction until it listen two click more for pertinent torquing of rays. Also, sure mark to untension the forward of the tent was.
5 / 5 Miguel
Has ordered this torsion motora to torsion down some connectors have meant to join copper and wiring of aluminium. According to a boss gauge has required the engine that could do 10 or 15 pounds of thumb, a description of this element suggested it would have to that do so only well. It arrives so only the few hours does and are already in a process of packaging he until the turn. In a pound 10 frame of thumbs, he so only the clicks can not drive the ray at all. In a 15 book of frame of thumb, literally am not quite strong of the quite hard turn to do a torsion the mechanism involves, so only continuous drive.

A reason I marvel if the mine is fake , is still although a packaging has been sealed still on, has had ANY MANUAL of instruction of any class inside a container; but I see photo in other descriptions of a real manual... Have rid a question of transmission with Amazon to the equal that will see one 2nd one is any better...

ORIGINAL INDICATION: 1 Star.

UPDATE: 10/12/2018 - I has received my substitution of Amazon very quickly after ridding my turn. I have used a substitution for 4 different tasks like this far and has treated as it have expected. My second unit has comprised the manual as well as the certificate of calibration, both duquel has not been to present in the packaging of mine first unit. Has update a description to 4 stars to reflect my global satisfaction.
4 / 5 Pinkie
Has chosen an analog version in a digital version reason a digital version any click and turn free when you achieve a torsion wished. In a digital, has to read some numbers and turning to stop when the volume to a setting has wished. This the mine looked also complicated , and I like a click to satisfy when you achieve one has aimed torsion with east a.

A a down the side to an analog version is that you have to that pull down and turn an inferior coverage to dip a tension, and apresamiento a lot turns to take to some big settings. No too big of the shot, but is recommended the retreats of dial to zero and release a first tension of the tent with which use. As I am assuming that the big advantage of a digital version is that it calms does not have to that do this adjustment before and with which uses. Still, I am happy has chosen an equivalent in a digital.
4 / 5 Stephani
A Wheeler Torsion the wrench has arrived today, and used it to locate my Leupold VX-2 my Ruger Mini-14 Aim, with RM Ruger 1 & 77/22 1-in Meso Ext Coverages. I have read Enough the few descriptions, and was the little concerned roughly likes to treat, but law perfectly. I mention some coverages esatte, reasons one of a esalquitrán' the bits have distributed is returned perfect for a cup 4 mountain of rays of coverage. It was able the dial the to 28 in-lbs for these coverages of particular discharge, as well as 45 in-lbs for some rays that traces to a rifle. Súper Easy to use, clear instructions, calibration info, and comes with the hard chance with empty for all some bit. Phase of worse chance, is will require to the paste up Uploads of Port, Autozone, Sears, etc to choose on the small has bitten dipped. You trace my rifle perfectly, and am surer that knows that a correct quantity of tq has been applied to the each ray. To good sure recommend.
5 / 5 Cassi
If ossia your first use of the setting of torsion of wrench or reassembling the firearm or firearm accessory, included, if the, as I have done for years, supposition in him and think you was in right, thinks again. Using this torsion of quality the wrench is to educate you that your touchy-cost-law the system is not quite like this attentive as you have thought that that it was. In yesteryear, touchy-cost-law was adapted. With a precision firearms and accesorias of today, is so only very acceptable. For maximum action out of your firearm, all precise died in a money and with accuracy torquing some rays and the dice is a lot of entity. Try a product, calm so only can me join be enlightened on some profits for presionar firearm rays to some pertinent torsion with the quality and wrench of attentive torsion. I say-Produced of tent simply any , when the accuracy is of vital weight to enhance maximum action.
4 / 5 Lannie
Very often has said I 'amour' the tool the Chinese done because of the quality issues the majority has. Ossia The torsion motora more than the wrench and comes with a resupplied of bit; the majority of that is not a better party for a Mosin (Russian), SKS (Chinese), and AK-47 (Russian) but have the together big of gunsmithing bit to write that it change so only well. It does not blame Wheeler for these tolerances of May of free and practical manufacture during a war. Calm will find them in a Brownell is catalogs. Wine with the molded marries plastic that resists all situate firmly. That has surprised was the slip of the certification of the test has comprised in a box. I have added pix of a manual to help explain things. My unit takes a bit harder that turn like this dipping increases I so that maintenances anything those slips out of him. I have found the pair of the gloves of thin nitrile help me take the good grip with my fat hands and of the toes. Compared to the thumb aforada-wrench of torsion of the reservation, a device was very inner +/- 1 of a real reading. It marks it down, they are bragging in the fact of Chinese tool.
4 / 5 Latonya
Was skeptical to buy the tool of the precision done in Cina, but has decided the casualidad the die some positive critiques.

In a side besides, was pleasantly surprised to find the interior of discharge of the calibration that objective a torsion measured and real in three points of data there is spaced by means of a row of torsion of this tool. Cela Gave bit it more confidence that had been he aforado correctly and would read with accuracy.

Unfortunately, while some rows of stairs of 10 to 65 in-lbs with lines a lot well for gradations, an indicator is very wide, comprising roughly 5 in-lbs. For example, if a fund of an indicator was in accordance with one '10' line, a cup would be in 15 line. So that it is a torsion in this setting? 10, 12.5, Or 15 in-lbs? The one who knows. The desire has done.
4 / 5 Darcel
Has loved to have the torsion motora of applications of sure ray, and has chosen this for $ 40 bucks. They are familiarised with Wheeler Engineering & like his material. These looks to be the a lot of produced well with bits of big quality to the equal that would expect of Wheeler. My only question with this neighbour is a small gauge that mark dialing in your torsion solves precisely kinda difficult.

The small stairs and the big/fat line he hard to be precise in the setting. They are sure he is so only well for my application & of use, but yes'n had it to do on, can the pony on one adds $ 16 bucks for a digital version. The trade was with digital is fussing with battery tho. It maintains that in alcohol.
4 / 5 Yer
Read all some 4-5 descriptions of star. They are in accordance with. I have bought this for a purpose and a purpose so only, to locate my discharge in the SAINT air-15 using Larue QD LT104 coverages of discharge. Calm does not love to scrape this on, reason these highland costs on means as well as the plot of discharges really good. After the laser bores sighting and levelling all has used a Wheeler to torsion some coverages according to a Larue specifications. Piece of cake. If you go to locate your calm discharge, he well with some pertinent tools like a Wheeler and the laser well bores sighter, rest of rifle or aims, and German level (is sold on Amazon), or the take to your venue gunsmith. Admitted, comes with the neighbour limited of bit that probably will do on 80-90 of some applications, but accepts all some another, which you also can buy on Amazon. Yep, Done in Cina. As that. It is material well and work. Highly recommended.
5 / 5 Shameka
A wrench looks good and has done a work for presionar but his no built for loosening reason you cant take any leverage in the screwdriver like can the rachet. Also a the say this politely? Well here suck. I have twisted a T25 bit in three seconds. It has been to a truck and grabbed my dewalt the bits and was easy peasey. Any insurance like slope of quality when it comes to this type of boxes of tool but would say them for $ has been expecting them resulted better in mine first project. I recommend this tool? Yes it has had you so only $ to spend then he a work. Utilisation this daily tool? Any one would opt them for the rachet type with quality Dewalt bit.
5 / 5 Nguyet
I have read where the people rote some bits complaining, has to maintain import any one has bitten that ossia small hex bosses or T1 torsion specs anything. Any small has bitten so only has like this the torsion can dip on the before they break to all the cost is manacles hard bit.
If it is not a right bit partorisca an apt disaster spends all a time, Chipping of a hard chance has bitten.
DeWalt The chance adds hard bits partorisca this screwdriver of hand-held torsion.
If it was not a right measure does not use it the main deceptions has not seen never maquinal in the @@@portaaviones that do this stupid suggestion returns it would have to that it reads but is the little free common sense right. It does not concern the lieutenant fijamente all especially when they are doing on million piece of dollar of crew.
Uses a bit partorisca one does well A Sinner a bit a torsion of ballast can take.
So only like the screwdrivers partorisca clocks can order a together economic expects him to dulcemente of the chip was or is conjoint expensive and have years of use.
Sometimes is better was partorisca substitute a ray with the better type of boss likes octagon then the star like the majority of people calls it,,, eaten partorisca raw that is all can say.
A Torsion the screwdrivers is the screwdriver adds the flawless work so only buys better bits and use a right bit partorisca a right measure ossia a main response to all the end of questions of history.

Some people say has has had bit in the loser when rid create them for a snap next plastic headline. I think it all be in his original box <>but I concealed they are < it would be necessary has it stapled closed so much can explosion very only the open lunch For Amazon has thought focus. But the mine is gone in the small box with a nude of tape of the amazon on concealed was halfway rasgado open but a lot entirely open.
Like this among all a topmast handlers the launching around does without inaugural that was regime .
More tape will not break a bank.
5 / 5 Lois
Well A name of an element certainly would not owe that be 'accurizing'. I comprise this Wheeler the product is not in plot of the money but he certainly would owe that that is drawn to do. I have had the occasion to try a TQ the wrench and is was way more then am comfortable trusting. I create Wheeler would owe that go back to a joint to draw and try again. I will be to return my 'fat wrench' and that purchases the main quality, tool more attentive!
4 / 5 Santiago
This is to result the level for looks of smiths. Easy to use and works every time. Mina of amour. It can not imagine doing things without east. That can not imagine is, there is still gunsmiths there concealed does not use this. I TRUST! Really, there is upper name gunsmiths there Not USING C, and trusting an old 'goodntite' method, which Is CRAPS! I have taken A lot of firearms for behind esputable' gunsmiths there that there is remarked each one which fastener was of the different torsion, saying me rid presionado the, which is bullcrap when you are paying partorisca on the 150 dollar an hour. Calm the favour and do your own work; these helps of tool that has gone a lot.
4 / 5 Mariel
Has been using the tools of then was in university, repairing cars, bounced, houses, etc... Before plunking down my hard livestock $ $ , I the lovely control to confirm a tool costs of the money.

Has begun to gather rifles look it in fact years, the majority is optical trace that does not answer well to be installed with excessive torsion in some highland rays, as I have decided neither the small torsion the wrench or that the screwdriver was in mandate. Unfortunately, there is not to whole plot of them around.
After the web to frustrate investigation this has aimed few feasible options, has purchased this unit. While I have bought he for mountain of discharge, the profit lateralmente is a capacity to properly rays of torsion elsewhere in a rifle... Another that that, are unsure will have another use for this tool... Inferior line, this tool is useful, but overpriced.

A tool is weighed in a hand, and has the quality feels. A unit 'a way' as the in a clockwise direction screwdriver of torsion, but neither like this it ratchet neither LH torsion of edge motora. Dipping a torsion is done to pull a unit of black base was and twisting it to regulate some stairs of torsion to a correct value. Some stairs is 0.5 thumbs long to indicate 10 to 65 pounds of thumb.

A unit comprises chance, bit, instructions with value of torsion for 6, 8, and 10 rays, lubed and dry, and the discharge of calibration with 10. 30 And 50 in lb values of calibration and a date.
Some 10 bits comprise four common screwdriver bit, three hex/allen bit, two torx bit, and to 1/4 thumb strolls of socket.
Some bits have the levels hex base, which leaves an use of bit that is not comprised (phillips, main or smaller torx or allen).

Has any way to confirm an accuracy of torsion another that a map of calibration that is to be comprise ( error in 10, 0.0 in 30 and 60), but in all the chance, was more attentive that one 'wrist aforada' has used box now...

PROS -
Material of quality and construction
Well has bitten selection, 1 more/4 thumb strolls of socket, the level has bitten the base leaves any level has bitten to be used.
Good quality mechanically hinged latching lid molded plastic case.

GILIPOLLAS -
The torsion that Goes up to dip is too small. Bending A do one to read torsion much easier
Prize - minus a star. If this unit was $ 15 less, was the five star .

MODIFICATION - after using a unit, a the annoying element is surfaced. A three has comprised allen hex bit (3/32, 7/64 and 5/32) any one is returned many of some mountains of the coverage of the discharge has bought he partorisca (7/32 thumb is the measure of coverage of popular discharge and is not comprised).... Slowly in that spends the little more bucks to take the together complete of bit - downgraded the three stars.
4 / 5 Freddy
Has taken this mainly reason have required the pound of thumb under wrench of torsion to with the accuracy presiona a stuffs of coverage of the bomb of fuel has injected in Harleys. I also free, filters, too tight, a hule gasket filter of breakings. Required 18-22 thumb lbs but my box of torsion of tool the wrench begun in 30. This Wheeler tool a work. Easy to dip and use. To dip, while pulling down in a fund, gone back a fund until a bar achieves your setting has wished, to the left goes of a fund ( appears for him). When you are presionando any one is presionando, when it achieves a conjoint torsion, give the noticeable kip' in control. The directions say to maintain dipping force to turn on he for 2 more kips' (total of 3 in the row). Basically foolproof. It is the good idea to return a setting to a torsion of low plus when you are done the using.
Now, does not have to that trust mine 'feel' for a right torsion. The prize for me are that can use on mine handguns also.
4 / 5 Theda
Ossia An absolutely terrible creation . It has dipped one has wished torsion to pull a base to one rear and rotating the. But it is loaded cradle , like this every time release it to king-situate your toes, returns and calm has to it the appeal was again. It is tapered, that reduces to one rear, and has no ridges that it resupply the solid grip. Enough, an integer of the rear discharges is smooth, with the wide depressions that front of career-to-behind, so that it does not have any surface on that it can take the good grip. Like increases a place of torsion, a quantity of increases by force. Ossia A lot LAST to USE.
4 / 5 Petronila
Amur This for need of delicate torsion in builds of rifle and another armory use. Easy to use and regulate, the weight adds, and has one feels of the tool of quality. A bit the selection is class of odd, but recognise that my concrete needs are not all the world-wide more is and is trying to do the like this flexible like poden. The good thing is that a walk accepts any level has bitten to measure. So much, you are doing a class to do east requires this tool, I wager that you already have a bit require in your collection of tool. I have had good experiences with Wheeler and this thumb/lb. The wrench is any exception . More than some options that has tried, in fact.

An only appearance that can not be ideal, is a setting gauge does not leave for precision. The majority of costruttrici to separate suggests the row of torsion, as this will be easily dialed to within to vary very reasonable. But exacting torsion specs is required for the particular application, a digital option is probably advisable.
5 / 5 Merrilee
Tool a lot handy and near to perfect. It avenges with the chance, certified of the calibration and some have suggested place of torsion for several measures of ray, and enough each municipalities bit you will require for mountain of discharge. I have found a place of torsion suggested to be the bit in a big side, especially for coverages of aluminium. It whitewash them for 15 -20 for edges of aluminium. A click is very positive... Basically a bit the boss gives was entirely when it achieves a torsion wished. Very good and very compatible. One the fat grip is ergonomic and give you abundance of leverage.

An only reason is not the indication of 5 star is a creation of a dial of adjustment. I spend gloves of nitrile when doing in of the guns, and a dial does not give you a lot a lot of to resist to. If has the little oil of gun in these gloves [or hands] and has to that exit to 50+ in/lbs, the some short work was for you. Really they require to add it grippy rim to a cup of a dial thus produced to achieve perfection.

This in spite of, am happy with a compraventa, and happy to leave a work of supposition behind.
5 / 5 Iraida
Is is hard to write a pertinent description of a value of wrenches of torsion in general. If takings to a point dondequiera achieve a level of accuracy and repeatability in firearms that constant and compatible torsion gives, then there is not any substitute for this device. Ossia The screwdriver of good torsion, and is an entrance levels one with the together of bit that is common in an industry. Calm will find you using it when you have dipped your calm guns behind neighbours after thorough cleaner teardowns, and will have less drift in action like the result.

The desire used it more for a prize, but really have any need to.

A reason gives it four in the place of five star is measure . A width of a main organism prevents to use the next objects (like some barrels). As such, is not useful on all the parts of gun.
4 / 5 Portia
Works to the equal that has announced. Calm really would have to that use the torsion English tone for mountains of discharge and coverages. Rays Of action also. They are spent of trace in fact a lot of years without one and of the frames of sinister coverage in the few tubes of discharge of in torquing some rays. $ It is sure economic to avert breaking the $ discharge. Read some directions twice. It comes with some the majority of common bits. Works with bits of the yours other tools also. So only believe a tool. It does not feel like his quite tight when some clicks of wrench,but is. Resist an impulse to ' give it the little extra to snug the on'. More manuacturers will be happy to give you a torsion specs for his products. So only call them.
4 / 5 Alisha
It have to that it has taken it one in fact these decades, but some partorisca learn slower of another. This will take all a guesswork out of screwing things partorisca plant. This can delete the majority of yours undressed rays (when adhering the directions of costruttrici), and lessen a casualidad of the elements that comes free on you. This also will have things equally screwed partorisca situate to reduce a possibility of things a lot when the be has not varied correctly. A number of bit that is coming with comes nowhere approaches partorisca fulfil my needs in some premiers two works with discharges have used these stops. Partorisca East to cost so to the equal that has to that have the plenary compliment of bit partorisca fulfil all your possible require goes down it an indication could give this product. Has the Master of economic Gun has bitten dipped this has had all some bit that this wrench has failed partorisca have for some works have completed like this far.
5 / 5 Retta
If you are the firearms 'tinkerer', and in fact likes to know that has in a department of torsion when it comes the bases of coverages / of the discharge, rays of action, etc, ossia an excellent and handy tool partorisca have around, and is abordable partorisca a eshadetree gunsmith'

That attentive or has to that say like this repeatable like the digital a when it has run side for side. A must has partorisca a firearms enthusiastic.

When I Achieve a setting there is the 'click' and partorisca turn more. Some bits and the chance are well, although I suggest partorisca take the consecrated full has bitten dipped partorisca use with a wrench. It agrees partorisca release a cradle when finalising or type of calibration finally.

Does well in other things around a house or car that requires put of torsion inside a row of this wrench. Mark calms sure takes it behind your shooting buddies to the equal that will love the use!
4 / 5 Beverlee
A must has partorisca firearms & especially locate optical. If the rays / of rays are too many loose, can fall was, if too tight, can break down incidents of multiple recoils. If has some rays too many tight & another too loose in your program of optical, can launch of a point of aim. Had a lot of questions with my optical before it take this tool . It can not take points of the compatible impact & sometimes would owe that boresight my way of AIR 308 again so only partorisca locate paper in 50 course. My spend the chance does not leave partorisca my propiciada have trace to an upper, as I owe that remount every time go shoot. After taking a . The wrench have gone to a row 5 times & have been died I on centre 100 run every time without adjustments.

Pros:
&62; I Compress in just 6 1/4 thumbs long & roughly 1.5 thumbs in diameter ( thumbs in base)
&62; it comes with the layer of torsion of certification that of the ones readings of torsion measured in some pre-marked values (the mine was inner 1/2 thumb the pound partorisca all has listed value)
&62; has some 9 more common bits partorisca firearms more an adapter partorisca 1/4' sockets partorisca walk
&62; retention of magnetic has bitten
&62; it comes with the chance of storage
&62; 2' the long bits add the little extra achieves to this otherwise stubby engine

Gilipollas:
&62; the bit in a heavy side 12.1 ounces without some ounces / of bits with bits
&62; the must agrees to zero a dial of torsion partorisca storage.
&62; the chance of storage is roughly 7 thumb for 4.5 thumb for 2.5 thumb, well partorisca the drawer of boxes of the tool, any very partorisca my rifle spends chance that takes to and of a row
5 / 5 Melisa
Handy screwdriver that is easy to use and a 1/2 star is the toss-up among metric and no-metric fasteners. It is impossible to predict the type of allen the socket of boss will find and a variance go in metric and no-metric can mean a difference and create the boss undressed.

Suggest that you take this but tent around for additional 1/4' the walk begins like this any nude a lot of fasteners. Be sure of first pertinent access of failures to the ray in the mountain of discharge or other parts.
5 / 5 Reyna
He Do builds of arms or same mountain of discharge ossia the must has. If you do not want to overtighten that spent expensive that you so only traded your kidney for, a right quantity of torsion is the necessity.

Always does sure to any overtighten coverages of discharge and mountains. A costruttore always will have a torsion of discharge that estimates in a manual.

(Useful tip) uses the little bit of blue edge locker like some rays a lot behind has been during recoil. Neither presiona in the lateral fashion unless only calm 2 rays for presionar. A correct way would be hand presiona all then torsion the fund has left, upper legislation, the cup has left, inferior legislation.
5 / 5 Deeanna
A Wheeler Firearms Accurizing Torsion the screwdriver/of Wrench is extremely easy to dip up and use. Calm does not require to use force by force excessive/ to dip the included a place of torsion of big plus (65 books of thumb) or the loosen the with which uses.
This element is the soyust has' the people those who do on, cleaned, disassembles more firearms. It is Much easier to use that the torsion English tone and can help 'old folks' like me with some arthritis in our hands to regulate torsion on more a lot of fastener in firearms and anything more. So only a negative--the bits that is included Is not labelled in a SAE together. This is not the question of first order, but was a lot of if a does not have to that 'hunt' for a correct measure. In all the chance, more firearms the people have 1/4' bits of walk of the his own and a lot really require a box has has distributed bit.
Good tool--take it!
4 / 5 Janel
This pocola adjustable torsion the engine is quickly the dial on and have the good row of place of torsion to cover more a lot inchpound works. They are not one the majority of reason some stairs of adjustment is difficult the pinpoint exactly where is solving a torsion. I imagine they are inner +/- 2 or 3 inchpounds and I generally err in a big side. If it is the very sensitive part yours plant torsion on and needs to be very precise then calms probably need the different, but much more expensive tool. For any concealed is doing general DIY gunsmithing ossia the must has tool.
5 / 5 Terese
Are not the defender of this wrench of torsion populate. Changing some settings is besides my capacities, but consider are virtually quadriplegic with using very small of my hands. But included my woman can any one plant he in 30 psi. You owe attractive out of a fund of a wrench and turn to a setting corrected. It is easy? Any way! Calm also has to that use some measures resupplied for Wheeler or a calibration is not valid. A selection of the measures does not comprise some the majority of calm popular measures so that it have to that buy some accessories to take some measures will use more often.
5 / 5 Del
Easy to use, comes with the good chance. Quite easy to regulate. An operation is smooth and he clicas on amiably when it achieves a place of torsion. I have required it T25 has bitten for my discharge and this there is not coming with east has bitten. I have had felizmente one of another together. Some graduations are quite near together, and an indicator to dip is quite wide, how is hard to really be attentive when that regulating to the to to something likes 18 in/lb. You are probably so only that goes to take interior 1-2 in/lb of a real setting. But for a prize, can has not beaten the really.
5 / 5 Amelia
Could have bought the screwdriver of torsion in HD but has imagined this was specifically partorisca to guns like some bits would be done for guns, any of some bits are returned some rays in my discharge or some coverages, this was a main reason to buy is, and I no really cures for a point to break. Any wrench has used before it give the light to give and the click. Some first time have tried this has thinks that that there is it lined a hex ray . He the strong click and has had such the big gives , that felt he likes the bit had slipped, have @@give once that it was so only like work, a rest of a ray torqued well. , In general it looks the good unit but give it 4 stars because any of some bits is a lot well mine

Top Customer Reviews: TEKTON Hex Key ...

Rating: 4 out of 5 with 60 ratings
3 / 5 Sunni
A sake: the selection Adds measures. The looks of good quality for one the majority of part. The case is very while it maintains each together class and organised of (voice a bad). So far the majority of some investigation of wrenches to be properly sized. A bit those that of some smaller wrenches look for to be undersized. Undersized The wrenches can direct in undressed fasteners.

A huh: So that is to say so sake and the small odd. A SAE the wrenches is longer that some metric wrenches. For the significant quantity. That is to say very well it has to the order was ( is easy to say SAE of metric), especially when fallen out of his titulars (low voice), but some the metric wrenches is the down bit. In the pair of case was to take to take quite a lot of advantage to fall takes it fastener. No an end of a world, but interest and the value that mentions.

A bad: 4 of some smaller wrenches are come angled. 2 Has the very light curve two the and 2 is significantly angled. Any one a lot effects an use, but any one which want to of the control again.an of the product downs in a case am not adds. One of some reasons chosen this element was a case . Flavour be able to find a measure wants to hurriedly. It has opened only a case and takes a clearly tagged wrench and go. Thought this would be perfect. A problem is that one falls wrenches out of a case very easily. Far too easily in my opinion. If you fall a case likewise the small height, likes him 8-9' (20cm), can expect at least some of some wrenches to be loose. It falls a case of the metre and they all be loose.
4 / 5 Kary
As I have bought this hex conjoint key concretely so that has the bouquet of some very small measures that occasionally need. Based in a description of the product has did not expect finals of balloon and so that it was not disappointed. Compraventa Tekton Tools in some pasts and has found generally the to be of good quality. No, any also while it breaks -On, but very well for use of house. These hex the tones are perfectly serviceable, but has taken few stars so that:

1. A case does not line some tones closely. Like this they tend to fall out of his void and movement around. Felizmente A metric and SAE the tones are of different period (the metric is lower) as it is not totally impossible to imagine out of that goes where, but is troubling.

2. One focuses in a case does not vary with a void/of tones- especially for some smaller measures. Like this it take it more the time then has to to select a correct tone. It sees semi-detached photo for the closeup. A problem exists by so metric and SAE.

3. Some the tones the small plus is not directly. That is to say common with tones of the lowest quality in my experience.

UPDATE:

Tekton has achieved has been in me after my description and routed me another full together of tones for free. While my complaints in a case are still there, some tones some small plus in this set of second is more directly. Like this I am that it attaches a star (3 in 4 stars) for some tones when being better but attack of still quality of the star of one focuses very properly rows with some tones and he he harder then has to be in hurriedly select a correct tone.
4 / 5 Jaleesa
It IS sceptical quite purchasing these so that it has already had Allen/Hex has posed anteriorly that was just rubbishes . As Any one with the motorcycle knows, AMOUR of manufacturers of the motorcycle to use Allen Tonnes everywhere in some bicycles, as I have required the good together. It take some casualidad to use these last night while reconstructing the set of carbs in the 1981 Virago 750, was very pleasantly impressed with a quality of these. Has the sake heft in them and is robust and has not twisted or transfer while applying pressure to take Allen of 37 Tones of years for an assembly of choke.

My two flus :

A case is plastic, which while any bad, is the small prone pause, but so far so good. I imagine at the end a portion of hinge will break because of the use has repeated, but for a prize has not beaten can be.

Allen the tones the small plus has not gone exactly directly, can see in a case that is the small angled and slanted, but for something this small would be to take pressed to have something supremely rigid. In general, I am very happy with this set!

Notes of premiums : These have the lifetime guaranteeed in the! I do not know that it do not have to never use, but is anything likes him Done the hand warrnaty is the direct substitution .
4 / 5 Antoine
That is to say that it could call it: A last together of Allen tones will not buy never. Unless it is by train to do you some have to the laws weighed really, is not liable in never require Allen main yours that 3/8s inch or 10mm. And what that down has each measure in existence. Posed very complete, and no very expensive.

Would want to give these 5 stars, but with all honesty, can no. A case is also take to open. I bad, is not impossible, is only that it has to laws in him the small also take, an access is that tight. Perhaps they think that that it is a better admits, more than the have I also loose where opens in his own, but like the people take older has problem with this class of thing.
5 / 5 Jonah
There is the good together of hex tones but when has moved looked to disappear or only can not take where posed the! Any road, has required the new together. Look in several places of tent of the hardware and Amazon. I have not required some elegant expensive together while it uses the mostly to pose the together pieces of furniture and adjusting my headboard. These are surprisingly well for the this has paid at the same time (thinks is in the dollar or two maintaining). Like Other critics have declared some of ones very thin some (0.028in and 0.7mm) is slightly misshapen but so that supremely thins is is understandable which are why I has not taken clashes era. Predominately So that it doubts would not be never uses the in all the case. Also, a case has the hole to hang he in a which wall any same to pay attention in in some pictures to list. Probably it was necessary hang so does not lose this set! In general, they are perfect for concealed it precise them prende and is very happy with purchase of mine.
4 / 5 Milan
I have bought this set for my fiance after finding in need of the hex yours in his house and no in possession of some tones that usually spends in my box of travelling tool.

Like The little another has remarked, some situates the wine taken with one .028' The slightly angled key - No enough to import but is the small to baffle in the informative conjoint mark of tones. Some tones are also quite greasy, which are well in of the terms to rust the prevention but I think a quantity on is the excessive. A case is robust and fund of the stays when is open, but some hinges are thin and will not be pause surprised at the end. Everything of some tones' the measures are embossed in his houses in a case, and everything excepts some the tones the small plus has his clearly stamped measured in a metal also. One paints of small aim in some focus (after degresasing) would do the very easy to read. An arrival of the oxide in a metal has very deep and darkness.

A case is main this has expected, almost 8 big inches, but obviously necessary when visas a period attaches arms of a SAE tones. A metric ones are tagged like arms of huerta' but is in fact quite long also. An advantage could enter very handy with the difficult fastener. It IS the very complete SAE and metric together, comprising a lot of measures that has not used never in in 50 years of active tinkering, law in mechanism, etc.

Has bought a lot other tools and sets of the marked tool TEKTON comprising sockets of impact, and has still to be disappointed in any one of them. This look of tones to be quite satisfactory for occasional use. They are not also like ones are backed by my tools of the machine but is certainly better concealed no in that has the key that need to take the work has done. It buys this together he only to ensure this has one of a oddball has measured that it can require you a bit day.
5 / 5 Tim
It Likes him my TEKTON Hex of together of Tom Key English. There is the good selection of metric and fractional measures. It has not torturing tried the look of Mays to have the be solid in them, and look for when being of good quality. A plastic case is very also. They break in and some have posed is tagged so has very was does not require to guess where to store them. Of course, they are all the different period so that helps into use and storage also. They line quite well in the enclosed case, unless I the attack against my hand with some force, remained in his places. I have not been agressively testing, has wanted only yes probably would scatter of normal bounce when that spends a case around. I have used the, accesses and work well. It recommends this product.
3 / 5 Derrick
It IS the small disappointed with this set. It take the hand-held bouquet-the tools have lined of Tekton, and up to now, has very been impressed.

A case is coming with the little of the pieces broken was, leaving roughly of some wrenches to float around without being broken in.

Some wrenches are not tagged with his measures, as when they all is coming rattling around a case defies to take them all behind in some correct places.

In the positive note, a metal has used research to be properly hardened. They have listened well when in some rays tensed. Any angling in some wrenches or the round of some corners so far.
3 / 5 Jaqueline
The wrenches is good quality - the box of storage is the pos. Quan Has arrived he of the wrenches we mostly loose in of the boxes -took me quite 45 minutes and 2 pair to augment glasses to return wrenches in propereslot boxes each wrench has is the patterned measure in a side in of the very small cards-but is there-another east theplastic container of storage a together is in quality that is the bummer so that it likes him his know that measured would have to use afterwards select them to him of inaccurate current has to measured to change up or down.iiin A steel some wrenches is done of-investigation be of big quality-Iwould buys again need .enparece Very- does not add but well of abundance to house handy man.
5 / 5 Kent
A lot of pieces here, hopefully more than ever need. They are arrived intact. Only quite 3 or 4 pieces were loose in a when I marry arrived, class of expected with the tools have taken. In a case a hex the accident of tones in place, and pictures of visas to remark the marked measure in a subordinated in black and white, and then again in a red plastic. I very cual a set. It IS of course the bit to problem to know that the people are quite sadists to do such small hex tones in 0.7mm and so troubling these elements of mark of the people that could require you the together like this for in a first place. Like A FYI perhaps some sets in of the tents of hardware, any local speciality or big boxes, typically does not spend down conjoint 1.5mm in better. Almost only it buys some sets or small pieces of small piece in place of of the this, but for the small more this costs a difference of prize. Based in visual inspection way down below magnification, some the smallest pieces look very decent.
5 / 5 Karry
Received this today and found all a allen the free wrenches in a quite bad-the plastic chance has drawn . A system to resist each individual hex tone in a box no really do the good work to maintain them sure unless it calms does not move never a plastic box around or spend he with you to a work to be done. I am coming up with the solution, of classes: A neighbour closes in the map that wraps as it conforms to an interior of a plastic spending chance. I have used the scissors to cut down a map and has dipped he to a hex tones in an interior that control/sure some tones in situating when in firm a chance. This would be necessary to maintain them surer and situate much better. A chance he no securely prójimo because of a small closure, ineffective tabs. I have wrapped an outside of a box with the strap of plastic bond to ensure a chance has not opened when moved around. In general, the together good with just roughly all some measure you can never need.
4 / 5 Darlena
The wrenches are good quality - the boxes of storage is the pos. When it has arrived of the wrenches we mostly loose in of the boxes -took roughly 45 minutes and 2 pair to augment glasses to return wrenches to propereslot in of the boxes each wrench has is the patterned measure in a side in of the very small papers-but is there-another it theplastic container of storage a neighbour is in of quality that is the bummer reason likes to know that measured would owe that use after selecting them to him current inaccurate has to that measured of transmission up or a steel some wrenches are done of-looks to be of big quality-Iwould buys again yes dipped of need- I does not add but well of abundance for home handy man.
5 / 5 Hoyt
A lot of pieces here, hopefully more than calm never needs. They have arrived intact. So only roughly 3 or 4 pieces were free in a chance when arrived, class of expected with the tools have taken. Inside a chance a hex the tones snap in place, and see pictures to remark the marked measure in a subordinated in black and white, and then again in a red plastic. I really like a together. It is of course he has bitten to disturb to know that the people are quite sadistic to do such small hex tones in and so that it disturbs that elements of mark of the people that could require you the neighbour like this partorisca in a first place. Like a FYI perhaps some insiemi in of the tents of hardware, any local speciality or big box, typically does not spend insiemi down in better. Almost so only bought some small pieces or insiemi of small piece in place of of the this, but for the little more this is cost a difference of prize. Based in visual inspection a lot down magnification, some the smallest pieces look a lot decent.
4 / 5 Esteban
Previously to the cost is, has used the multitool for my bicycle. A question with those, is that although they are small and easy to spend the big row of tools in your bicycle, they sometimes so only can not take a work done. This was a lot of apparent when it disassemble my bicycle to install new parts. These allen the tones come with the long and short variant, as I can apply more force or achieve the difficult to achieve zone. An only negative is that when I opened it, is covered, and mean COVERED in greasing this odorato really bad. I imagine it is to maintain some tools to rust while they seat to expect to be sold in shelves, but has thinks that was the one who a coating of black oxide was. Anyways, The paper towel cleans it well up. I dried him down again in WD-40 just to be in a sure side, and no odora almost like this bad.
5 / 5 Tyrone
Has taken this together reason like the plot other tools of to the the diverse measures likes them to them to them these, is the better value that buys the neighbour versus the pairs have measured individual. You try to decide among a allen the hammer has bitten place vs this together, but has gone with this one of hand-held tools has more fact felt for my use that the together of bet of the hammer.

Some measures have used the majority (the mid-sized of the) is quite durable. He the work of brake and accidentally still firmly turned it a wrong way and they have not bent or deform. ( I have had the wrench of economic socket for another ray that in fact bent). Some only wrenches in these places concealed'd concern me is some measure some tiny plus; they look impossibly thin and ask me what forces could in fact withstand, if a allen forms works included in this measure, and that in fact uses wrenches that tiny.
4 / 5 Maryrose
A course of my complaint is to Amazon, as it can not be totally so only to Tekton. A product is weighed enough of then is pieces of metal . When I have opened a chance, many some pieces have not been the correct place. A product has to that it has been shaken and has fallen the quite small time during a shipment of then is probably very considered the fragile product.

Also included some small pieces that was in the right place has been bent. The economic looks because of him. Another reviewers has mentioned in a fat, and has had those in my tools. This in spite of, not to annoy me a lot a lot of. That has annoyed was that a lot of pieces have looked used and cockroaches - partially economic products and method of poor delivery.

This in spite of, some hurts has not gone quite big to return/transmission, and am concerned that a substitution will have a same question.
4 / 5 Kirk
Hate to buy insiemi of tools with common measures disappeared. Has the pocolos insiemi of Tekton the sockets also concealed no calm fraud with the missing 18mm to to the socket likes like this of another. Ossia The enormous plus .

This place of hex the tones of the wrenches probably has more than pieces that necessary. Some the smallest measures am a lot of flimsy and has come bent and curve easily. It was not comfortable using them to be sincere, but felizmente a lot really have the need for them.

A chance did not close it mechanism very strong and is sometimes finicky to take all some tabs have closed. For a record, this chair in a backside of my Jeep, but there is not bursting opened in his own, still. Sometimes, when I open a chance, the little of some wrenches are free.

In general, is the together a lot complete that that I require it to do and has not had any real questions with them like this far.
4 / 5 Carmelia
Has taken this box because I have lost my allen wrench thus little picatinny drive pistol laser has bought them was amazon and lowes has not had a allen English tone that small. When I have taken a Tekton Hex box Key has been them surprised by a weight of him, did not expect it to be like this weighed as it was. When I opened It up it was able to see reason is weighed as well as it was. Of the to you basically measures a lot calm never need! There is some small plus that the tooth chooses, does not have any idea that is used for but is has comprised. Also they have enormous some ossia almost the measure of half thumb in diameter. A chance that these go in is sturdy and fact out of hard plastic. Some wrenches go in two ways, a lot of time managed and courts managed and is both clearly labeled with his measures. In general this hex to the conjoint tone will pay for him in time, is a together only will require like this I cant imagine that it require main stops measures or smaller. An only downsides to a neighbour is a way some wrenches are ensured in a chance. A chance has this pocola notch carved was in 3 places for each wrench. You have supposed to press down in a wrench to do them the pop to some notches to ensure them. Some subjects have is some notch widens after the moment and no longer securely resist some wrenches and after the while his wont included burst when it press a wrenched to some notch, some wrenches fallen so only to plant loosley. But I have not bought this together for a chance bought him to them for some wrenches and they utmost taste cant complain too much. They are happy with a compraventa and am sure the'll use for the long time.
4 / 5 Mauro
An only reason has not given these the 5 is some people could see a 5 indication and assume the wrench of better quality. There is better quality some there but for a calm money does not go to beat these. I have been concerned in a sizing of some smaller wrenches and the one who true to the measure was. I have required one to be true to measure and quite hard to take it Novak ray of adjustment of the View that an owner had used some class of locktite or equivalent on. A wench in this place a work where a an I already had no. More law taking is all well reason have bought an only neighbour to take that a ray was.
5 / 5 Melani
So the things today are dipped together with hex tones of wrenches, everything of mine recumbent bicycle in my room to dine chairs. I have required the sure sized hex tone of wrench for presionar on my bicycle, like a resupplied with era disposable... And it has broken. This neighbour is PERFECTO, as it maintains each measure could wish for everything in a situate. I have not had any question that finds some right measures for a bicycle, and a wrench was a lot of sturdy. I have presionado on suspenders of leg in my chairs to dine, it drawer in the mine that @advise of files of metal, and my dresses that dry storm. (Some last two things a lot really require it, but with so many measures of wrench to choose of, has been looking for things to use them on!)
4 / 5 Abel
This is not the drop-quality allen near closely of the wrench, but is also any one the together of upper quality.

Some main pieces are to touch—a lot of-arrival and sturdy. Some smaller pieces? The things are the pocolos shakier there like the metal has used is not particularly rigid in these gauges and is more like this of the pieces of flexible boss that spends partorisca be hex-shaped.

A chance is also a lot quite perfect, as it does not resist each measure in situating quite perfectly— has some flopping roughly and falling was.

But this has said, for a prize, which takings is perfectly satisfactory for more than applications, and is not one of these toolsets that there will be you swearing low yours breathe reason they so only no .
4 / 5 Juan
Has read to plot of descriptions before I have purchased this together of wrench. My neighbour arrived in shape perfect. A pair of some wrenches has come free during shipping but I quickly found his pertinent locations in a plastic chance. My question are can any never find a legislation hex wrench reason take fallen to one of my boxes of tool. This neighbour comes with his own chance and is easy maintains clue of some wrenches. This neighbour is coming yesterday and has used already one of some small wrenches to do the reparation. Some of some smaller wrenches are not that sturdy; this in spite of, a prize was adds!
4 / 5 Candis
I work in of the electrical guitars, and many times, has small rays that requires very small, or less common allen has measured tones. Fund and has ordered this together, of then are the defender of Tekton tools, and there is so only in the each measure allen the tone could never need. I have found that among some Imperial and Metric wrenches, there is always a ossia exactly a right measure so that I am trying to do.

A neighbour is a lot well, and some wrenches feels a lot of sturdy, has included one tiny some. A chance is also a lot well, and resists all some tones in situating amiably, and maintains him has organised. In general, the a lot of very hex conjoint tone.
5 / 5 Zenia
Ossia The together complete of Allen wrenches. It comprises some very tiny of the that has not been if I will not take never to use but so only that knows that I have him feel me covered for any work. If you remark a chance has the little hole in a backside that or can hang a together in yours peg near, which is the very characteristic . Some the main wrenches have his measure stamped on the but a small some no. Really do not annoy me but so only does not take him mixed on causing you probably will require it caliper to measure them and dip his backside in his respective place in a chance. They are happy with my together.

Tekton I products are utmost. Spent with confidence.
5 / 5 Chandra
A lot Ailing say you one his truth some titled of the wrench has drawn bad. A chance is well in of the terms of inaugural and conclude. Usually plastic casings whose open or prójimo good or pause of tabs, but this one has beaten my scepticism. An only negative characteristic is some wrenches tend to snap out of place easily, and his annoying to dip them behind. It likes- one variety and of the measures. It is the neighbour adds to have when doing on speciality fasteners that aftermarket short hub voladores
5 / 5 Herlinda
rays of boss of Allen is not something extracted daily. This in spite of, look to look in in some convenient moments. A recent example was chair that is to be purchase behind when and has taken wobbly - an only way to fox that was to snug on some allen rays of boss. Ikea The elements are particularly guilty. In all the chance a point is that late or early almost each house can use this- finally. A box has both metric and measures of EUA and does not cost any a lot of. It buys it before calm the precise.
5 / 5 Rafaela
Is all like this described in a description and all the expected, But when it has taken them an element and has taken he out of a box has listened them inner of free metal.. So much the then he a lot there is attentively has opened a chance. That the invernadero was roughly 10 free wrenches that dips everywhere and any one pressed in the some spaces. Yes mostly the English tones smaller.. But it has taken the moment to take them all free and out of being stuck behind some other wrenches.. 2 Of a small plus some were a lot a lot bent, has tried them like this softly like this could them to unbend his,, but has broken (does not treat it big the has not bought a box for some two smaller measures,, But the so only feel that it was packaging of nave very bad , or a pop in the spaces are not all these tight.... Shopping again but so only of the tent where could open them a container and see everything of them very bent and pressed to his spaces.
5 / 5 Myrle
This place of the Allen wrench literally will have each measure of precise alone Allen wrench for a rest if your life. Among amiably in the brilliant red box for easily of location. This in spite of, has two flus. A prime minister is that some of a wrences when in the first place I take him there is a bit oil on the partorisca this slimey feels, but ossia at all concealed can not be solved so only for the dry down. A second is that some of some smaller wrenches easily can be bent. This in spite of, recommend any to take this, especially is missing an Allen wrench for any purpose.
5 / 5 Micah
This neighbour is weighed enough. They owe that it has used it the heaviest/metal better. Some tones are sized correctly (like opposed to an economic plus some concealed tends to be undersized / wobbly). I have used on pair of the projects and I was able to take some a lot stubborn rays without bending/breaking some tones. They look to be that they resist really well. They are happy with this compraventa. Ossia My second TEKTON near. I have bought the together different before and lost it. I have bought the slightly different dipped this time. But a quality is comparable.
5 / 5 Veronica
Has opened a chance to listen rattling. I open a chance and there is red plastic shards of a chance that is broken. Also, some wrenches (roughly 1/3) has come free and freely floated in a chance. I have not tried a torsion in some wrenches still. Some the tiniest wrenches look a lot of frail (easily will bend). I have ordered for a combo of both metric and regular measures. I am disappointed when I takes the mark the new element and is broken. The chance could touch stupid but maintain me to lose some wrenches. I am disappointed in a QA.
4 / 5 Cythia
Has several insiemi of hex wrenches, but has has had to that recently take a oddball-sized ray that has not had the stops of pertinent wrench. This neighbour is very complete, has each conceivable measure and looks partorisca be a lot well has done. It likes that some arms in some metric wrenches are some pocolos shorter that some arms in a SAE wrenches, he doing easy to say them averts. I think that that ossia the good value partorisca of the money, also.
4 / 5 Emerald
Has received a together in a topmast and has been concerned with everything of a rattles has listened them inside a esealed' box. After opening, has found eight wrenches were free and no in his location of pertinent storage. Unfortunately, mine 30 wrench of piece dips has had so only 29 wrenches. A metric small plus, has been missing. Tekton Looks partorisca have the lifetime the guarantee of substitution so that it was partorisca give sweats the call partorisca substitute a wrench is disappeared to to the Monday likes does not seat likes gone back of a together integer.
5 / 5 Larissa
Has used a hex tones partorisca some a lot tight rays and has on resisted.
Any 5 reasons a chance partorisca spend among him is rubbishes: opening a chance usually resupplies quite a lot of forces the dislodge an or two tones, some tones do not return at all, and some tones are also close like your toe inevitably dislodges another when selecting your tone of election.
4 / 5 Karrie
For a calm prize any one very better . This be has said, this neighbour is identical to other tools of mark of the subject (load of port of cough of cough) probably done in a same factory and rebranded for tekton. A chance is very economic, and some the smallest measures are quite flimsy. For the works maquinales normal and the hardware will not be disappointed with some have measured wrenches 'normal'. Desire that a metrics was a same period like together fractional, is significantly shorter (sees comparison of photo)
5 / 5 Margherita
has found that some of my taps have had metric allen rays when I have been to change bosses. All some the metric wrenches have had was adapted more to a automotive or the needs of motorcycle have. I have required leg the scarce of these L shaped wrenches to take to some taps. With this together, are now ready for anything with a allen boss, and some controls of chances and fixes him amiably. It does not doubt to buy these.
5 / 5 Amos
Ossia The sum of big and complete quality allen conjoint tone.

I use a .050 One the plot and this has a plus 2 concealed is included smaller, like some small needles are like this small

any insurances that would use these paralizaciones but am prepared..

The chance maintains him all orderly and near to the equal that am known to leave things in a wrong place and any to find them never again

so many measures of thumb and that ape mertrik the fashion also so much can do on everything in a world-wide

unless they exit with some whitworth measured of allens, Inghilterra, am looking in you
4 / 5 Marinda
I work in the boatyard like the operator of impulse of the boat, and has taken these to use when we change out of zincs in of the rudders/of axes/trim tabs. I used him on roughly 15 you bounced like this far, and I am quite happy with them. A chance is a lot handy and maintains the things have organised, although a clasp for a chance is a bit finicky and when it has fallen results in an explosion of hex tones everywhere. For a prize a variety of measures is utmost and more than coverages that need, more is easy to maintain the dry things and cleaned (many of mine coworkers with stock exchanges of plastic zip or some organisers of the game of the open air has corroded tones of our salty working means). I also like an enclosed organiser in this nude open air some/stock exchanges for an ease of use and casualidad lessened to lose tones. So only I can it burst it was and use that need in the gaze without undermining around or untangling some tones. Some tones looks quite solid, that resist until being cranked down quite hard without bending or signs partorisca snap.

Will see like this resists up into use constant prójimo, but like this far am happy with them and does not import a toneless clasp to the equal that are in my stock exchange the majority of a time.
5 / 5 Karole
Has in the Allen wrenches of hundred in mine toolboxes, but has not had a wrench that has required. My election was to buy this together complete, with the pocolas other measures I gentleman;t has (or has not required never), or has paid of the half a prize for A ' WRENCH. Well, now I have on 130 wrenches. Some of some smaller wrenches do not remain clipped in a box and some of some real small some concealed the rests look prone to bend when they are takes. It does not think has any practical way to solve this, at least in this row of prize, but be conscious that the majority of a plough of time on a box, will have free, small, the Allen wrenches that floating around and begun for a paving of cochera. Otherwise, Is the good and same box in some small measures, some wrenches Allen am returned good rays. It is the good box .
4 / 5 Somer
Possess a lot Tekton tools and while I want to all of the his producs has not been impressed with this particular element, Goes ' Plough chrome arrival of big visibility anti coating to slip the tone of wrench dips for sale here on Amazon. It was impressed like this with his product that has bought all 4 insiemi of tones of wrenches. They are too appealing to a DIY-er eyes to any to take them everything.
4 / 5 Moira
A lot cheaply does hex together tone. Some smaller measures and like this wry and has done bad that they are unusable. Included some tones some big plus is wry, soft and look terrible. Spend of the extra money and buy the name of better mark unless it calms does not have any election. Waste of time and money
5 / 5 Margit
Like this hex is around and like this tossed for contractors. I have had an accident where changed out of my boss of door of coverages Or dual shower. It take some bosses were with the box of tool has saved hex has had but could not take another era. Had a handyman the boss of control was in of the thumbs and another in metric. Sheesh. The conceals will not spend mine again.
5 / 5 Ellsworth
Some decent neighbouring looks but a lot of wrenches were loose in a chance. This has required that tentativa partorisca dip them behind in his pertinent place. I have not appreciated an inconvenience and a potential that some wrenches can be in a wrong space. You are probably he better bought him in Imposición of House or your tent of favourite hardware partorisca ensure taking some right tools in some right spaces.
5 / 5 Carolyn
Some wrenches look well, but does not remain dipped in a plastic chance. Any sure if some of some group have broken was, but every time the open a lot of some fall of wrenches was and has to that imagine was where partorisca dip them behind. A whole reason has taken a neighbour was partorisca maintain them organised so that the bondadoso to squander a purpose.
5 / 5 Vernice
A vendor was GRPerks. I have paid roughly 16 bucks comprising nave.

Has had 2 old bending hex set, but was so only SAE/the thumbs and has had so only 8-9 wrenches for together (and the majority of some measures was one same among a two of them).

Has loved the place this there has been both SAE and metric, and the one of then has had more the reasonable prize. These together returns a bill. A quality is very too much.

Like this far, has used a 2mm wrench to felizmente take the since it was way too tight. I have had to dip enough the bit of pressure in a 2mm wrench, but felizmente very double. Also gone back a die perfectly.

Has joined another look of wrenches to be shaped/cut well too much. A chance is to have that heavy and a lot handy; a stay of wrenches in his spaces.

Am pleased with cost of mine. And reason there is the good selection of measures for both SAE and metric, does not think will require to buy another hex together! I will give my old hex together my local charity.
5 / 5 Lucio
With a possible exception of the highly skilled (big) measure, this neighbour resupplies so only in the each hex option of wrench one could wish in the very good prize. One would have to that maintain import that is the estandard' hex near, no the refined together, like this available of Wera in the a lot of main prize. This in spite of, if an only requires the hex yours once in the add while, this neighbour will do for users more random. If it love the plus resilient place with possiblyh the ball-final of type, would suggest to look in a Wera, like this near can disappoint.
4 / 5 Janey
HAS dozens of allen the wrenches that kick around, totally could not find one a measure has required for the car audio installs. Near it adds, metric and level, is coming to a rescue. Solids of English tones, has spent the wide row of measures. State impressed with a TEKTON marks other products have purchased.
5 / 5 Eleonor
Awesome Addition my collection of tool. If works with the plot of hex rays of boss for electronics or work of @@@modeling, this can be really handy to have, especially for those really small has begun rays. A container could be the little better, a latching leaves in the mine does not do like this well. But after the little DIY and some pocolos latches of a tent of hardware, is behind in business.
5 / 5 Nicolle
A box of container of the product that is gone in look to be previously opened before (the products am returned previously?). Some wrenches are qualities quite good but has had the excessive quantity was lubricante/of fat on that. I have had to dry down an excess with some paper towels. A marcación on for some measures of some wrenches could be better does not face correctly calms so much can see the one who some measures are. A chance that is gone in is finicky to use because of a corner of a black plastic with any focus on that. Finally, some wrenches to measure smaller was bit it bent but does not import reason any does not plan never use some smaller measures. In general, they are decent for a prize but could have been to better plot if any on lubricate, besiege a marcación better, and has had the better chance setup.
5 / 5 Emelina
Finally am fact that looks for the particular measure hex yours (Allen wrench) when they are loose and scattered everywhere. This produces sturdy the chance there is virtually each level of measure and metric hex wrench each one that like this in his own clearly marked snap-in location. One of a compraventa of the better tool has done.
4 / 5 Ricky
Take which pays stops. A chance is has arrived broken with all some tones have fallen was. A bit those that of some teeth have been broken and has taken the moment to imagine out of that has been where. A have faint measure markings in a once dry measure was a coating of generous oil.

Has recommended forward tekton elements like his torsion English tones. Ossia Spend it .
4 / 5 Keshia
A good: the selection Adds measures. The looks of qualities very partorisca one the majority of part. The chance is as well as it maintains all classify together and organised of (sees a bad). Like this far the majority of some wrenches looks partorisca be properly sized. A bit those that of some look of wrenches smaller that be undersized. Undersized The wrenches can direct the undressed fasteners.

A huh: Like this ossia both good and the little odd. A SAE the wrenches are longer that some metric wrenches. For the significant quantity. Ossia Really a lot of calms has to order him was ( is easy to say SAE of metric), especially when they fall out of his headlines (sees down), but some the metric wrenches are quell'has bitten short. In the pair of chance was hard to take enough leverage to release the hard fastener. No an end of a world, but interesting and the value that mentions.

A bad: 4 of some smaller wrenches are to come bent. 2 Has the very light curve two the and 2 is significantly has bent. No really effect an use, but a lot that master of the product nuevo.un control downs in a chance are not adds. One of some reasons has chosen this element was a chance . Flavour be able to find a measure loves quickly. So only open a chance and grab a clearly labeled wrench and go. Thought this would be perfect. A question is that one falls wrenches out of a chance a lot easily. Far too easily in my opinion. If you fall a chance likewise the small height, likes 8-9' (20cm), can expect at least some of some wrenches to be loose. Drop a chance of the metre and they all be free.
4 / 5 Serita
To the equal that have bought this hex conjoint tone specifically reason has stirs it of some very small measures that I occasionally need. Based in a description of the product has not expected finals of ball and so that it has not been disappointed. I have bought Tekton tools in some pasts and found the generally to be of good quality. No, no like this as well as it Snaps-On, but perfectly well for use of house. These hex the tones are perfectly serviceable, but has taken few crash reasons:

1. A chance does not resist some tones closely. For this tend to fall out of his spaces and movement around. Felizmente A metric and SAE the tones are of different period (the metric is shorter) as it is not entirely impossible to imagine out of that goes where, but is annoying.

2. Any focus in a chance does not line up with some spaces/of tones- especially for some smaller measures. For this takes more the time then was necessary to select a correct tone. It sees semi-detached photo for the closeup. A question exists for both metric and SAE.

3. Some tones some small plus is not directly. Ossia Common with the tones of qualities go down in my experience.

UPDATE:

Tekton has achieved was mine after my description and sent another together full of tones free of cariche. While my complaints in a chance are still there, some tones some small plus in this second set is more directly. For this am adding a star (3 to 4 stars) for some tones when being better quality but although strikes of the star of some seals a lot properly lines up with some tones and he the hardest fact then has to that be to quickly select a correct tone.
4 / 5 Nichol
Was skeptical roughly purchasing these I so that there is already has had Allen/Hex has dipped previously concealed was just rubbishes . As any with the motorcycle knows, AMOUR of costruttrici of the motorcycle to use Allen Toni everywhere in some bicycles, as I have required the together good. It take some casualidad to use these last night while reconstructing the together of carbs in the 1981 Virago 750, was a lot pleasantly impressed with a quality of these. Has the abonos heft to them and is sturdy and has not twisted or curve while applying pressure to take Allen of 37 Tones of years for a choke assembly.

My two flus :

A chance is plastic, which while any one bad, is the little prone the breaking, but like this far like this good. It imagines finally a portion of hinge will break because of using repeated, but for a prize can not be has beaten.

Allen the smallest tones has not gone exactly directly, can see in a chance that is the little bent and slanted, but for something this small would be hard pressed to have something extremely rigid. In general, I am a lot happy with this together!

Commentaries of prize : These have the lifetime has guaranteeed on him! I do not know that I will not owe it never use, but is to anything likes Craftsman warrnaty is the substitution directed .
5 / 5 Lila
Ossia That it could call it: A last near of the calm Allen wrenches will not buy never. Unless you are doing a bit it has to that it weighed it really, calm is not liable to never require Allen main Tone that 3/8ths thumb or 10mm. And the one who that down has each measure in existence. Near very complete, and no very expensive.

Would want to give these 5 stars, but with all honesty, can no. A chance is too hard to open. I mean, it is not impossible, is so only that has to that it does in him the little too hard, an access is that tight. Perhaps they think that that it is a better committed, more than the have I free hips where opens in his own, but so that the people take older has question with this class of what.
5 / 5 Marni
Has had the together good of hex tones but when I have moved looked to disappear or so only can not agree where has dipped him! Any way, has required the together new. You look in several places of tent of the hardware and Amazon. I have not required some together expensive elegant like the utilisation mostly to dip the together pieces of furniture and regulating my headboard. These are surprisingly well so that it has paid at the same time (I thinks is on the dollar or two maintaining). Like another reviewers has declared some of some really thin some ( & ) is slightly misshapen but so that extremely it thins is is understandable which is reason I has not taken clashes era. Mainly reason doubt it was not never using them in all the chance. Also, a chance has the hole for the hang in a wall like any one included takes attention to in some pictures to list. Probably it have to that it hang so that it does not lose this together! In general, they are perfect so that I require him for and am a lot happy with cost of mine.
5 / 5 Carla
Horrible, the stay was.

Arrived and a red chance has been broken. Pieces everywhere. An interior of wrenches was no longer in his something, strewn roughly. The good regime that finds the place for all some pieces especially a tiny toothpick sized some. Also they are all coated in the substance of fat fat. Gross.

Needless To say this neighbour is in some rubbishes the'll be looking for the together different.
5 / 5 Caryn
Has bought this together for my promise after finding I in need of the hex yours in his house and no in possession of some tones that usually spends in my box of travelling tool.

Like the little another there is remarked, some places have received wine with one .028' The slightly bent tone - No enough to import but is the little baffling in frames he new spouse of tones. Some tones are also quite greasy, which is well in of the terms to rust the prevention but I think a quantity on is excessive. A chance is sturdy and walk of stays when it is open, but some hinges are thin and will not be pause surprised finally. Everything of some tones' the measures are embossed in his houses in a chance, and all but some tones some small plus has his clearly stamped measured to a metal also. A bit produced white in some focus (after degresasing) would do him a lot easy to read. An arrival of the oxide in a metal has a lot deep and darkness.

A chance is main that has expected, almost 8 big thumbs, but obviously necessary when you see a period adds arms of a SAE tones. A metric some are labelled like hort arms' but is in fact quite long also. A leverage could go in a lot handy with the difficult fastener. It is the a lot of complete SAE and together metric, comprising a lot of measures that has not used never on 50 years of active tinkering, doing on diagram, etc.

has bought many other tools and insiemi of tool branded TEKTON comprising sockets of impact, and there is still to be disappointed in any they. This look of tones to be quite satisfactory for occasional use. They are not like this well like some am supported by my tools of car but is certainly better that no in that have the tone that need to take the work done. Buy this neighbour he so only to ensure that has one of a oddball has measured that it can require you a bit day.
4 / 5 Kindra
I like my TEKTON Hex near of Tone of Wrench. There is the good selection of metric and fractional measures. Has not torturing tried him but look to have the solid feels to them, and look to be of good quality. A plastic chance is a lot also. They snap In and a place is labeled like this he the the a lot of was calm does not require to guess where to store them. Of course, they are all the different period so that helps into use and storage also. They resist quite well in the enclosed chance, unless the attack against my hand with some force, is remained in his places. I have not been agressively testing, has loved so only see yes probably would scatter of normal bouncing when spending a chance around. I used him, they return and work well. You recommend this product.
5 / 5 Basil
Was the little disappointed with this together. I have taken it stirs it of hand-held tools of Tekton, and up to now, has a lot of state impressed.

A chance is coming with the few pieces broken was, leaving roughly of some wrenches to float around without being snapped in.

Some wrenches is not labeled with his measures, as when they all is coming rattling around a chance defies to take them all behind in some correct places.

In the positive note, a metal has used looks to be properly hardened. They felt well when in some rays have presionado. Not bending in some wrenches or rounding of some corners like this far.
4 / 5 Annamarie
Quite conjoint typical of Allen is, at all the mine also has underlined.

Low stars been due to packaging. A container of element has been rasgado and taped near, a molded the plastic chance was warped and will not close amiably, the inaugural a box has on discovered that the majority of some tones have not been in there of places, kinda likes any one has on half way by means of packing them and has launched so only the handful ontop and has closed unexpectedly an enclosed chance and latched the. I am guessing this is reason a chance was warped, together with a warping a lot of some plásticoes latches has used to resist some wrenches in place has been broken was and some the smallest wrenches are bent. Quite disappointed honradamente, can still use of mark of them but I desire had bought the different mark.

A chance is look quite bulky sturdy, thinks of a swipe an old plus molded chance of tool of the power. Personally it prefer something smaller but protects him a lot well if you do not have all a harm receives. You do not recommend buying these, will take a work are sure but am not impressed

Top Customer Reviews: EPAuto 1/2-inch ...

Rating: 4 out of 5 with 60 ratings
4 / 5 Rolland
Enough I take the plot of this torsion of cheap plus the wrenches is the too produced in China and just rebranded, but there very bad at all and slightly better quality then debits of port.

A ratcheting the mechanism is coming unlubricated so mark sure to attach the shortly before this begins to use the, taking t15 measure torx. I guess his no very required, but will protect and a lot prolongs a life of a tool.

IS come accurate and this type of click is easy of aforarte using the stairs something cual the stairs of cheap luggage utmost work to try precision also.

Used it only once to tense lugs in 110 like any insurance like scratches up but in to the the look likes him can take has beaten the. A ratchet is only 24 tooth, but has coaches quite big same although has points of contact the strong only looks and does not expect it to slip teeth or anything.

Also could wants to attach 1/2 in 3/8 adapter in a cart if you do not possess or could enter handy for the smallest hardware.
5 / 5 Bernardine
So far, I actuate only the used this for cover, and law while it expect. I have not tried a precision of a parameter of torsion still.

Quan He in the first place arrived, tried to pose the in his max torsion only to do sure has has not grinded the problems that adjusts through a full field. Quan Has done so, his like me something was bad... Some hold strong when adjusting a torsion, in which sense likes him the teeth of buses not meshing properly. But it results that I have not had a knob of the lock fully counters-in an in a clockwise direction direction. If it begins it go with a wrench in his parameter of the lowest torsion, a knob of the lock any one visits a long way. So much, after you begin to augment a parameter of torsion, has to loosen a knob to close the small more. Once I give concealed, each sense well.

In all the case, law so expected, and would buy again, especially for so occasionally while I require the torsion English tone.
1 / 5 Kit
This torsion the wrench was the one of entity to lose for me. It does not operate properly. I have required in torsion in a lower end of a wrench. May clicked. I have seated he in a shelf that thinks perhaps only asked too much of him. Before fast in today. I have required in torsion a ray these wineries my mower layer in 40 books of feet. I have imagined salvation! Time of redemption for this compraventa! It opens the mine can of the woman does not say me has bought the very-for-swimming wrench. Well I have followed some directions to pose a torsion in 40 ft lbs. Desprs Law in a ray for the thought of bit probably used also weight. Far Go in 20 and has taken the differential click. Fresco. Work. It likes I above the in 30. Still the click. Perfecto. These works of thing. 35. Click. Well. 40 here we go. Hmm. Any click, but law in other parameters so has to only there is not tensed the enough. A bit those that gone back later a lot looks concealed am using too enough, but law in some earlier parameters, has to be law now. Tour, turn, ACCIDENTS !!! And some accidents of ray . Tan Yes. This thing no in 10-15 ft lb varies and no in 40. It IS useless and thinks that has learnt my lesson on buying the wrench of cheap torsion.
4 / 5 Lina
10 minutes after taking these products has posed he in a test in my wrangler. I tensed 20 spacers Of nuts of wheel in a correct specs then a lug nuts in my rims also. Work perfectly every time and has listened any change in pressured has applied to tense each nuts so much is compatible. The only complaint has is that a knob to close a torsion in planting easily result loose, even so his quite tight with out of the so any too much cause of a subject for me. I will update this description the month or so when it has directed the bit or if my falls of the wheel was will update then. It pleases the useful click has found this description of any help means the plot.
5 / 5 Maire
That is to say upper in a model gone through some tents of parts of the car, costs two bucks less, and comes with the case - cual other Ships of Free no. with Cousins. In 10-150ft-lbs, spent more works. It IS the 1 /2' walk, as it takes an adapter wants to use any one 3/8' the calm sockets already own. Only he he prende to tense, likes to take the 1/2' bar of breaker in loosen lug or nuts of axial.
5 / 5 Natalie
I do not write any a lot of descriptions of the product but I have listened obliged in direct some of some negative critics here.

Has revises that it is difficult to adjust a torsion. That is to say futility . There is the ray of tension in a base of a cape. Loosen A ray and a torsion adjust easily. The tense behind up and the stays where posed the.

Read that a click has not gone quite pronounced. It uses the good number of wrenches of torsion in some soldiers and in of the commercial garages. I think that that a click is so pronounced like any another wrench. It is not sper audible has the plot of noise around but is very visible and to well sure can listen. Using he in the calm zone, can more to good sure when being a click.

All and everything, this wrench what necessities to do. I wish an adjustment of torsion ratcheted, but outrage concealed, that is to say a lot of values a $ 25.
4 / 5 Dorian
A quality to be of the very big wrench for a prize and do so announced all a road in a torsion of big plus. An only subject has had with him so declared by other users are that when torquing the things in estimating more lower some clicks to leave know his tensed in the this wants to is very calm. He cliques, but has to attention to arrest very near for a noise of click and a when being that his tensed or can be very easy in in tense. Another that that although it is amazing value and the small problem to treat for the this is paying prendi. I recommend this in those paid $ 60+ for a same thing of another mark.
3 / 5 Cyrstal
Cairo, HAS BOUGHT the wrench of cheap torsion. The tan took it already the wrench of cheap torsion.
Looks to do a work.
Even so he isnt sper accurate.
And he doesnt torsion 'click' in both directions. So that he youve has taken the reverse threaded nuts, Likes Him marks in a basket of clutch in mine 1993 FLSTF, then sings it to you taken the reading of torsion in this direction.

Still, looks to do well in a 'taking' direction.
4 / 5 Clelia
Work well, any pristine, but is the tool eats.... No the compraventa yes wants the only to aim your friends have tools.
Uses for assembly of rifle. It IS accurate. The click is very has defined.
4 / 5 Kimi
The adjustments are the small rough and does not like him to the of the click to two times likes him in has to but of the work and a prize is well. I maintain in my truck down torsion my hitching instruments for apropiar- specs every time tows mine 5.r.

Maintains oiled and stored in a torsion of plus goes down the parameter and he would have to last
5 / 5 Tiera
Works well, any pristine, but is the tool eats.... Not to buy it himself calm the want so only partorisca aim your friends have tools.
I use he partorisca assembly of rifle. It is attentive. The click is a lot has defined.
4 / 5 Blair
Has purchased this wrench the few weeks does. Looked partorisca be the strong product a lot this in spite of does not act.

Tried it multiple time and then compared with the Kobalt wrench of Torsion and every time this EP English tone of car has not been clicking and would continue presionar.

This wrench will finalise partorisca cost you money, no shabby. I am returned immediately.
5 / 5 Juliann
The adjustments are the little rough and does not like to the of the click to two times likes to of him has to that but the work and a prize is well. I maintain in my truck to torsion down my hitching instruments to pertinent specs every time mine of tow 5.ºr.

Maintains oiled and stored in a torsion of plus goes down the setting and he would have to that last
5 / 5 Brendan
This torsion the wrench is easy to ossia. I used it recently to torsion down a lug rays in my wheels of vehicles to a costruttore pertinent specs. Shortly after doing so much and that goes partorisca the walk my vehicle has begun partorisca do clunking sounds. I have taken all some wheels was and retorqued his to some pertinent specs and a clunking has persisted still. As I have taken he in tending it to him and has been said all my wheels were free. They have verified a torsion in some first rays of the scrolling and was in 70 ft the books and I had dipped a torsion in a wrench to 95 ft books. This result in my suspension that is resulted the disorder been due to mine rotors somehow resulting misaligned thanks to this wrench of stupid torsion.
5 / 5 Joellen
Has expected to revise this until I have had time to use he for the few projects. It is very easy to use and has been useful like this far, but a thing has concerned. It does not listen to those other descriptions roughly not listening a click. It is not too strong but unless has auricular and gloves on, does not have any calm way will not listen /for the feel. So much, my worry, the few people have mentioned undressed rays/of the rays and this concern me to us also. Besides under law of torsion of rows adds but in some main rows I required (90 & 70) some rays have taken extremely tight and any one clicas. I have prendido in fact both times because it was concerned like this roughly in hablador harm to my car. A part of entity, my mountain of the lowest engine, has had any @subject in spite of taking first of a 'click.' Absorbers of mine of accidents have been also well. I have verified in his constantly because of them possibly a lot when being any quite tight. So only be mindful of some main applications. I have prendido when it seats some rays could not manage anymore presionando and has not had any @subject. Perhaps they are so only the little paranoid roughly in hablador harm to my car, but enough would follow my instinct in planting to trust the product has has begun only use.
4 / 5 Palmer
My wrench of torsion of the prime minister. It can no comparisons to another but after changing my wheels of motorcycle and another maintenence in a bicycle, all some rays have been presionados to his torsion specified and there is not coming free. Looked More the free that bookshop for presionar but perhaps this maintained of on presionando. It looks good quality . Continuous use and update this like necessary.
4 / 5 Evangelina
Any attentive this to do the new mark out of a box? Yeah M Too much. It was very careful screwing in the 10 lb hex ray because it is the motorcycle done of commission . They are a lot handy with the import of tools. A wrench has not been clicking and some rays have taken that has thought to be quite tight. Of course, as it can you contest well of science?! Well, whadya knows, a next ray undressed inside an engine casing, and well, now this effing the wrench cost to plot more than him well. That would give to having spent the touch more for the better wrench. pissedoff
4 / 5 Theron
Ossia A same wrench that is sold for 4 or 5 another soyarcas' here. So only you compare it the thing of elements and calm will see that an only difference is a photohack logo in a boss. All another was so only more money. All know comes from/comes from china, all know is not professional quality, and all knows his probably any one the majority of attentive. Repeatability Is that it was after, to do lug dice and such. Although a torsion spec is was at least calm any warp your rotors... Compared to a escome' (subjective I know) of the $ 300 wrench of dollar I use in work, my supposition is his at least in a ballpark. Mark so only sure takes a legislation one for row of torsion finta yours. A boss was quite dry when I opened it, as I gave it the good shot of white lithium reason he more probably seats around among uses.
4 / 5 Kirstie
The one who the value adds. This wrench is sturdy, big quality, and easy to use. When Ordering has been concerned in a quality been due to a prize a low plus. But, when it arrives it was very pleased with a product that included comprises the box of good storage. One forms torsion the settings am quell'has bitten hard to read with my old eyes, but some approximation to space of markings look to be the characteristic of all the Torsion of Click Wrenches. I have found that simply counting a number of half-the turns of a place of storage has resupplied an easier way to dip a torsion, but ossia so only the personal preference..
4 / 5 Archie
A law of torsion of wrench well. I have not tried the one who attentive is but the law adds for big and any like this big ray while has a room to manoeuvre he. I used it on lug dice and in caliper highland rays and also on oil and casserole of discharge of transmission. If has laws of room well. An only negative minor is that I require to take external to dip some numbers so it is quell'has bitten hard to see in light lower. If you are professional that can be the question but is taste, so only the use of from time to time, is not the big question. Probably I will purchase the smallest wrench for some rays plus very small but for some rays plus very big this one are adds.
5 / 5 Hester
When being my wrench of torsion of the prime minister, no active a lot of partorisca the compare to. This in spite of, this tool has done well partorisca me. I have had recently the wheels bet on in the tent, and required partorisca take the wheel was partorisca dip a hubcap has retreated on. I have imagined now it was a time partorisca take a right tool partorisca a work, as I have presionado always so only lug given until it can not go more. I have assumed also that a tent of wheel has used a wrench partorisca impact to substitute a lug given on all the wheels, and would be too tight.

This thing in the combination with my bar of basic breaker returns a bill partorisca substitute some wheels in a 95 ft-lp spec. Have @@give Quickly that, yes, a tent of wheel has presionado in a lug dice, as I have had to that jump in my bar of breaker to loosen some dice. After applying pertinent pressure to a lug die, has found was able of the free pause with a torsion English tone without question.

After substituting some wheels in a van, has decided to try a car, which have not had of the pertinent 1/2 socket stops. So much, I have decided to try using a 3/8 adapter of this together in combination with my bar of breaker. I quickly found that one 3/8 adapter is not meant for this class of pressure, as it breaks for the half. This was the lesson has learnt, as I have decided spent one 1/2 socket for another car and was able to take all these lug the animal dice-presionados to some pertinent spec any time.

My tip for any that want to loosen tight or frozen lug dice: it does not use this torsion English tone. Given a period of a wrench, is looking for to use that extra leverage the loosen a tight extra or frozen lug die. Instead, you take the basic 1/2 breaker sweep and the pipe of some class.
5 / 5 Jalisa
Has bought the Load of wrench of Port torsion and compared to this one is like the tank to the hybrid car.

Ossia My torsion of prime minister the wrench and was packaged amiably in the hardened plastic case (looks it could take the drop or two). When I have dipped this wrench to my hands there is heft and could say this goes to be one of these tools that will last. Some readings to read a torsion specifics the weight was clear and readable. I have taken immediately this my car woman that has had recently the wheel changes it has verified quickly a SUV lug dice without question.

Wrench of torsion of the quality that deserves the something in your cochera.

I big recommend a quality of this wrench and he will be the tool adds to have some coming years. It has to that well sure this wrench will help me power by means of projects.
4 / 5 Caroyln
Automotive Use: it was very happy to receive a torsion English tone. First 6 rays of boss, looks to be, was fine clicks and everything. 7th any snap!! Horrible so only my day. A lot of good descriptions also. Perhaps the mine was the uselessness . Soooo More than regime when purchasing.
4 / 5 Yasmine
For my dyna slip this does well with manufacturing value of torsion.... Substituted my old a .. To the These works likes them to them the field.
4 / 5 Sadie
Has been that loves to do my rotations of own wheel for years but has maintained so only dips has been him been due to any in that has some tools. I have purchased finally the handful of tools for him and am like this happy has done.

One of some tools has purchased was this torsion English tone that quell'was incredibly easy to use legislation out of a box. They are not the every day maquinales and can not speak to a durability or longevity because I purchased it so only the weeks of the pair done, but like this far is the bang adds for a buck compraventa. I have selected it is a reason some descriptions add, could use it on multiple vehicles been due to a big row, and a lot of the entity for me was that it avenges with the chance. To arrive to this point, could not be happier with cost of mine!
5 / 5 Arnulfo
Has taken for torqueing my lug given when I rotate my own wheels. I know it is quite attentive for that. Looking is construction , is one same likes Tekton, but less expensive. It looks very done and can be aforado in home is the DIY type of person; look on Youtube so that-to video.

The operation is easy like any another. An adjustment take harder that turn calm so that it augments a ft/lb is, but never grinds or take stuck. It comes with the Metre of handy/Newton to map/of conversion of Book of Feet, which is the good addition .

In general, am happy with this compraventa. It fulfils my needs and of the expectations.
5 / 5 Jc
Attentive And good works. Mark sure to store in '0' any in the possible setting falls like this of the ambiguous instructions indicates!!! So only it undress two threaded holes relatively of entities tonight like the result of my error of storage. Verified after this past with the digital torsion 'blocked and now applies roughly more 35 torsion that indicated and is now in some rubbishes.
5 / 5 Gloria
Salvation, I really like this wrench of torsion. In fact it is a prime minister an I active has not possessed never. It is done a lot well , the good chromed arrival and a adjuster is blackened metal.. Easy to regulate. I used it so only another day, to verify lug torsion of die. I do not have anything for the compare to this in spite of, these lug the dice have required the big torsion and the looks likes him was on enough of good. It is the very good tool !! Good chance also, plastic to have that has weighed.. Look can have come from/come from the Tent of Part of Car of canal. You are the prize adds also!! Quickly send out of vendor, and is gone in the a lot of insulated container.... They are not disappointed!! Thank you EPAuto And Amazon!!! The god Blesses, Keith
4 / 5 Felicia
has used this to torsion my spacers of wheel in my jeep to a pertinent specs. Law a lot Well!! It was impacted in fact reason well this wrench is considering that I have paid for him. Personally the would not spend never the hundreds or included the hundred in frames that the wrench of touch has appointed. As this is exited perfect!! It can not be happier!! I add compraventa!! Easy to use and regulate!! It closes in yours place has wished! Has the a lot of 'click' pronounced has paste once yours torsion wished.
4 / 5 Andrea
Pros: Among the good headline and is easy to read.
Gilipollas: A wheel that resists and jump concealed resists a boss of wrench maintains to fall out of everytime take one. It has to that exit my magnet to find them and dip his backside in. And, with which I dialed in a setting loves, and presionar a die to close, a die to close unscrew and lose my setting. Returning...
5 / 5 Rosana
Enough I take the plot of this torsion of economic plus the wrenches are mass produced in Cina and just rebranded, but there very bad at all and slightly the better quality then uploads of port.

A ratcheting the mechanism is coming unlubricated like this sure mark to add the shortly before that begins to use the, apresamiento t15 has measured torx. I guess his no really required, but will protect and a lot prolong a life of a tool.

Has come attentive and this type of click is easy of aforar calm using the stairs something like the stairs of the work of economic luggage adds to try accuracy also.

Used it so only once for presionar lugs to 110 like any insurance to the equal that resists up but to the look likes can take has beaten the. A ratchet is so only 24 tooth, but has coaches quite big same although has the points of contact so only looks strong and does not expect it to slip teeth or anything.

Also could wants to add 1/2 to 3/8 adapter to a cart if you do not possess one could go in handy for the smallest hardware.
4 / 5 Emmy
This torsion the wrench was the one of the entity loses for me. It does not act correctly. I have required to torsion in an end a lower that a wrench. He never clicked. I seated it on a shelf that thinks perhaps he so only asked too much of him. First of fast to today. I have required to torsion a ray that resists my mower brota to 40 books of feet. I have imagined “hey! Time of redemption thus compraventa! Now my woman can no to say me has bought the useless wrench.” Well I have followed some directions to dip a torsion to 40 ft lbs. After doing in a ray for the bit has thought probably used too hanged. The far has been to 20 and has taken the differential click. Fresco. Work. It likes I on the to 30. Still the click. Perfecto. These works of what. 35. Click. Well. 40 here we go. Hmm. Any click, but work in some other settings I like this has to that so only no it presionó enough. A bit those that gone back later really looks that am using too much force, but work in some earlier settings, has to be reads now. Tour, turn, SNAPS!!! And a ray snaps. Like this yeah. This thing no in 10-15 ft lb row and no in 40. It is useless and thinks that has learnt my lesson on buying the wrench of economic torsion.
5 / 5 Beth
10 minutes after receiving this product dipped it to a test in mine wrangler. I have presionado 20 spacers of dice of wheel to some corrected specs then a lug given in mine rims also. Law perfectly every time and seats any transmission in pressured has applied for presionar each die how is compatible. The only complaint has is that a @@@knob to close a torsion in situating easily result free, this in spite of his quite tight with out the one of way that does not cause too much of a subject for me. I will update this description the month or like this when I have driven the bit or if my wheel falls off will update then. Please the useful click has found this description of any help means the plot.
4 / 5 Rosemary
Does not write any a lot of descriptions of the product but I have felt thank you to direct some of some negative critiques here.

Has revises that it is difficult to regulate a torsion. Ossia Dud. There is the ray of tension in a base of a boss. Loosen A ray and a torsion rule easily. It presiona Behind on and rests where calm dipped that.

Has read that a “click” has not gone quite pronounced. I have used the good number of wrenches of torsion in some soldate and in of the cocheras commercial. I think that that a click is pronounced as well as any one another wrench. It is not súper audible has the plot of noise around but is very visible and calm to good sure can seats. Using he in the calm zone, can more to good sure listen a click.

All and everything, this wrench that the needs does. I wish an adjustment of torsion ratcheted, but outrage concealed, ossia a lot of value a $ 25.
4 / 5 Merrill
Like this far, has has used so only this for sparking plugs, and law as it has expected. I have not tried an accuracy of a place of torsion still.

When He in the first place arrived, has tried to dip the to his max only torsion to do sure has not had a lot the questions that regulates by means of a full row. When I have done like this, it seats it likes him something was bad... Some hold strong when regulating a torsion, which felt likes teeth of coaches not meshing properly. But it results that I have not had a @@@knob to close fully contadora-in a clockwise direction. If starts go with a wrench in his place of torsion lower, a @@@knob of the lock does not turn very remote. So much, with which starts to augment a place of torsion, has to loosen a @@@knob to close the little more. Have @@give Once that, everything felt well.

In all the chance, law like this expected, and would buy again, especially partorisca like this infrequently to the equal that need the torsion English tone.
5 / 5 Mandy
Ossia Upper to a model spent for some tents of parts of the car, costs two bucks less, and comes with the chance - as some another no. Ships free with Cousins. In 10-150ft-lbs, covers more works. It is the 1 /2' walk, like this grab an adapter yes wants to use any 3/8' the calm sockets already own. So only it does for presionar, likes to take that 1/2' bar of breaker to loosen lug or dice of axial.
5 / 5 Jody
A wrench feels quality very big for a prize and do like this announced all a way to a torsion of big plus. A subject only has had with him like this declared by other users is that when torquing things in of the lowest values some clicks to leave are his presionados to the that calm want it this very calm. He clicas, but has to that pay attention a lot of neighbour for a noise of the click and one feel that his presionado or can be very easy to on presionar. Another that that although it is amazing value and the small question to treat so that it is paying paralizaciones. I recommend this in that paid $ 60+ for a same thing of another mark.
4 / 5 Rhett
Look, has bought the wrench of economic torsion. Like this already it take the wrench of economic torsion.
Looks to do a work.
This in spite of him isnt súper attentive.
And he doesnt torsion 'click' in both directions. So that he youve has taken the reverse threaded die, taste to him in a clutch basket in mine 1993 FLSTF, then you cant take the reading of torsion in this direction.

Still, looks to do well in a direction soyain'.
5 / 5 Gene
Has followed some instructions have comprised with a wrench, in the first place trying it on the no essential ray. Place in 16 ft./lb., A wrench any click. In spite of that, is come from to use he for a work have purchased he partorisca, presionando some rays for a rocker assembly in the engine of my car. I have presionado a first ray until a wrench clicked. Of a wrench has looked to be operating usually, is come from to a next ray. This in spite of, when I have presionado a second ray, he sheared is gone in a blockade of engine. In hindsight, a wrench clearly overtightened a besides his ray 16 ft./lb. Setting, that causes a ray to shear was. So only they are while a ray will be able to be extracted. If no, my car is has shot.
5 / 5 Matthew
Hey, For a prize is a lot of value he! In pertinent when being the technology of calibration & of inspector of quality, be sure to read all some materials that come with a tool, loves to do this tool last...
I types use seen this torsion English tones and has had to spend them in regularly for his has has verified was and usually is lasted grieves 6 months to the year!!!
Use and toss his backside to a box of tool is without releasing a tension, these cause to break!!!
5 / 5 Neomi
It is main that has thought them. It is heavy and sturdy sure. It resupplies so only a right period partorisca mine 27mm socket partorisca achieve a house of filter of the oil. Partorisca My car, requires 18lb torq partorisca presionar a house of filter of the oil. A manual said partorisca put of low torsion, a click is hard to relieve, as I in fact dipped mine another hand in a boss while presionando and the easily can feel a click is spent.

Does well.
4 / 5 Una
Took it so only today and has a lot of state pleased with his quality. It feels a lot of sturdy, heavy, and unbreakable. Sleeve knurling is has done amiably.
Tried it on a low plus and in a dipping a big plus - works so only well, gives the 'click' a lot of all a time. If I have done all my life on building engines, perhaps would consider to buy that crazy expensive Snaps On tool, but is so only perhaps. I am guessing this his work without any questions for me.
Recommends to any, compraventa with confidence yes need the good torsion English tone.
5 / 5 Matilde
Has has used so only a torsion English tone the little time, but is obvious that it is the a lot of-crafted tool that work properly. The the little of the mine own impromptu tests to verify to see if a torsion in fact rule when a dial is turned, and this in spite of rudimentary, some tests gave me to confidence of knots to use a tool in chance where repeatable the torsion is required. They are quite happy with him, and are pleasantly has surprised that it is also-crafted how is, quotes his prize of @@subject.
5 / 5 Shirlee
Has bought this look it in fact month. I have used he for a first time yesterday. I have followed some instructions and has begun was with the pair of rays very essential in the place of low torsion. Work a lot until I am spent for main 30 lb ft. With which conceal, he a lot of click. I have finalised shearing one of some rays. To the amazon has offered to substitute it so that it is that it has chosen. I am expecting that a substitution is better.
5 / 5 Darwin
Works like suppositions to, but has fill that that bit it to him inaccurate in value of small torsion - has tried roughly 10 lb/ft and has decided any to risk and extracted completed by the hand.
This in spite of the work adds in of the main values.
5 / 5 Gilma
Has bought this torsion the English tone in some descriptions adds? I question these descriptions !!!...????? Any aforado properly ….He overtightened and snapped of the 15mm ray in 80 foot Lbs in that resists hub. I took the averages the day to drill out of a ray. Also the try in the lug the still ray overtightened any click.. Any happy!!! The ELEMENT Is RETURNED
4 / 5 Gaynelle
Today has taken a EPAUTO 1/2 'click to walk wrench of torsion, fast nave, some strong material looks and perfect for my work in my cars. They are not the professional mechanic but I likes him my own reparations in my cars. A Torsion the wrench feels strong and of good quality, did not use it still, but expect that I will not have the question with him. Packaging And excellent tool also for EPAUTO.
4 / 5 Marcela
Finally taken to use it. My old one there is prendido to the law was very old school type. This one looks well. Used the in my upper final bicycle. Going to do casserole afterwards. To Some looks of to accuracy well the taste to them of the that has another for the compare to, am dipping my confidence is one . The prize was right and comes with map of chance and good conversion with extensions. The main thing are has not broken any rays to install.
5 / 5 Karren
Bar of expensive breaker! Read stirs it of these descriptions before I have decided to buy. Some were satisfied and some have taken a product still has done. One this was faulty. Take the casualidad master but has had to send behind and to the amazon is sum in that. The supposition will go to Upload of Port for his torsion English tone.
4 / 5 Eileen
Has bought this torsion English tone to verify my lug given in my truck. Only new wheels apresamientos and has had some questions with some technicians/of installer. Happy I a control. A wrench is more or minus 4 tolerance and I suppose ossia quite near for lug given. A specification in my truck is 98 ft. lbs. One has turned in a wrench is around 10 to 150 ft. lbs. It has dipped a wrench on 98 ft. lbs., torsion My wheel lugs and know is corrected. A wrench could be longer like the wheel was slightly in a way to operate a wrench, but he all has done. It likes- one 1/2 thumb strolls for the beefy dips up.
4 / 5 Ema
I have ordered this partorisca torquing the ray in mine lawnmower crankshaft. I have finalised partorisca dip a ray on and a delivery of this resemblance. Perfecto that time. It is the clicker English tone partorisca write that it is used strongly in automotive. It dips your torsion and then turns dulcemente. When it Takes to a conjoint torsion he clicas and partorisca turn a ray. A lot handy as I do not owe that look in the dial while turning. Love it.
4 / 5 Yanira
Ossia The good torsion English tone, especially partorisca a prize. I bought it partorisca use when presionando a coverage of lock of rear cassette in my bicycle of street. Bicycles of torsion of active main finals place partorisca rays, coverages, etc. Of the moment that presiona on can cause irreversible harm to frames and of the components. It likes that of the gradations of torsion of of the stairs of the adjustment is marked in both metric and english. A good value.
4 / 5 Dylan
Has had to that substitute an old wrench. Invernadero This one and decided for the try. When you Arrive I control is accuracy in my trucks lug dice, of then know a place of torsion on him. A wrench clicked when I created to a torsion in a die. Tried the in the little more with a same result. It has to that say that it is the good wrench in a prize abordable. The only thing is that it is for hand-held edges a lot so only.
4 / 5 Serina
My car there is not coming with the wrench for some wheels has bought like this this to have in a trunk in chance of an emergency but also to be able to add the together of McGard locks.
A tool is a lot sturdier that looks in some images and comes packaged in the chance to spend so it does not destroy everything in your trunk.
Highly recommended.
5 / 5 Erick
Other descriptions were a lot of that this wrench any sure click lbs. For me, he so only clicked in 65lbs. I have tried 20lbs, 40lbs and 75lbs, any clicked. This was a lot of frustrating I like this precise presiona some dice and rays with concrete torsion.
The wrench feels the good quality but is so only not doing like this wrench of torsion.
5 / 5 Bennett
Like this cant speak for use of term with a longitude of him but has required the new torsion English tone and didnt wants to spend $ 150. This a there is had informs utmost and was economic. He doesnt calm stop of in torquing but clica when have paste a limit or dips so only has to that presionar the little slower and stop when he the clicks and you will be well. Hopefully Last the long time but he for now are to add and takes a work done.
5 / 5 Calista
To That it liked him to it: easy to use, has the boss of ratchet.
To That that did not like: it has not done besides down put of torsion, says around 12 ft/lbs or lower. When A torsion specified the setting is achieved, a wrench is supposed to click. It do not have any click in some settings some low plus, and I probably overtorqued some rays. Ossia A defect of obvious product and simply would owe that fix , or not giving an user an option to use more torsion of drop the settings of then no .
4 / 5 Elden
Has bought this the tension the clutch in the SxS. An audible click that said when you have achieved a law of right torsion so only with regular threaded rays (i.et. When Presionando the ray in a clockwise direction). A primary clutch has the reverse edge as we could not say when it have achieved a pertinent tension. My clicks of fellow torsion of wrench so many directions. It looks produced of good quality this in spite of.
4 / 5 Josefine
That is supposition to do . Easy to dip, easy to use. I used it to verify a torsion in mine lugnuts in 100 feet-book and my mower brotas in 40 feet-book and fact a lot well for both applications. So only out of curiosity, has joined the weight of 45 pounds in the distance of 1 feet and has listened a very next click to a 45 ft-lb setting.
4 / 5 Lakia
Has taken one 1 /2' reason there is a low end to included torsion likes 3/8' and the main big end. This in spite of, material for the majority uses one 3/8' could be the best chooses. Now I owe that use an adapter for my smaller sockets I use for my cars. Work well and a chance is well. It is much easier the torsion spent the wrenches have used the dial in properly.

Top Customer Reviews: Duda Energy dwrench ...

Rating: 4 out of 5 with 55 ratings
5 / 5 Jessi
I will be to use this bung English tone exclusively in of the plastic barrels with bungs of nylon like the wear will not be a subject but look only, is adapted of aluminium of low note like the does not expect the to line up has feigned to use them on closely screwed in drums of bungs/of steel.
3 / 5 Eliza
I have required he for 55 Barrel of bung of Chevron. Work but expected some covers return closely in some holes of crosses, instead is to lose it apt cual he easier to slip and break a plastic.
5 / 5 Harmony
Like A technology of the cart of the apprentice takes a work of inaugural some barrels of volume of oils, refrigerant, the clean brake etc. Until I have ordered this tool some technologies before me used and the time battled with locks of canal, screwdrivers and pliers. Sometimes it takes several minutes and the roads adds of the endeavour has opened some of some cover in some barrels. With this tool animates very small and the times are wasted like this mark concealed opens the easy barrels! It can not think any looked for or has bought this before. They had been that the one same road for years!
5 / 5 Margy
Perfecto! Much more robust and longer durable compared in some plastic counterparts. It have bought the plastic version for inaugural some cover in my barrels of storage of the water, and has been chewed up and angled in a first use. A version of aluminium has lined up, opened some barrels with less enough, and is still weight very clear. We maintain ours in the ziplock the stock exchange recorded in a side of some barrels opens for ease in the find.
4 / 5 Beverlee
Some works of big final sake, use he for plastic drums. It IS the loose access but taking very - suppose is loose to return another type of cover.

A small end is nonsensical, any same know which has thinks that he the fact that form - concentrate very big or any enough with a longitude to do anything excepts the games of one covers small.
4 / 5 Bobby
This wrench of economic drum a good work for the just prize. His no the wrench to have to weighed but laws well in our application. We use it to us to open 55gal drums of oil of the engine and he have done well.
3 / 5 Reyes
A bung covers them in mine 55 drum of chevron is also small for a measure of the same wrench. Has thinks that that this was the regular measure but apparently very each bung the holes are equally.
5 / 5 Ranae
To well sure he the one work, but no apt perfectly, as it slips and the piece has entered some plastic of cover. Has had to very very careful to maintain he to slip. This be has said, he a work well, and has known ordered a cheap plus one could find, as I can any one complain me. Only careful be and was a lot.
1 / 5 Milo
Useless Unless you plan on ploughing the barrel already loosened. Orderly 3 and has broken everything in the subject of days.
5 / 5 Roseanna
Work and has to has weighed perfectly. I store some Diesel in 15 Barrels of Chevron so drilled the small hole in easterly and uses any 550 cord to join he in some capes of barrel like us any misplace the. Which are why I has ordered the second a.L
5 / 5 Loris
Fact of feeble metal. Works very well but no partorisca daily use, 5 cause of estimativa to star a lot
4 / 5 Ken
Some works of big final well, uses partorisca plastic drums. It is the free access but grabs a lot of - I assumes are free to return other types of discharge.

A small end is pointless, any same was that it has thought that his he that forms - very too fat or no quite long to do anything but the band out of one covers small.
4 / 5 Grisel
To good sure done a work, but does not return perfectly, as it slips and the chips am gone in some plastic of discharge. I have had to be really really careful to maintain he to slip. This be has said, he a work well, and has known has ordered an economic plus one could find, as I can not complain. So only be careful and was a lot.
4 / 5 Ta
Perfecto! A lot of sturdier and more long that last compared to a plastic counterparts. It have bought the plastic version for inaugural some discharge in my barrels of storage of the water, and was chewed up and bent inside a first use. A version of aluminium has on resisted, has opened some barrels with less by force, and is hanged still very light. We maintain our in the ziplock stock exchange taped to a side of some barrels opens for ease in the find.
4 / 5 Exie
This JUNK !! Pause in a first use. It do not open one 3/4' bung spent. Any sure the one who has drawn this but he are not described like this. Pure Junk. It does not order , it maintains to Look !!
5 / 5 Teresa
Some works of wrench, while hard. An aluminium is quite feeble. Some first time have tried loosen the tight ventilation bung, a leaf of aluminium in a small end of a wrench has broken.

This so only is not until a work.
4 / 5 Leland
This wrench of economic drum a good work for the just prize. His no the wrench to have to that weighed but work well in our application. We use it to us to open 55gal drums of oil of engine and has done well.
4 / 5 Keena
A wrench returns a drum bungs and the a lot of easier fact to open them that using pliers, or something more. A wrench is done of the metal of pot and feels light and brittle. They are not the fallen still, but am concerned that will spend to do .
5 / 5 Solange
A work but the longevity is questionable. It looks metal of economic pot. While his still snap for the half anytime now. A plastic alternative probably would be better.
4 / 5 Margarett
Against a description, this tool no with 3/4 thumb bungs; for like this, the turn has been begun. Partorisca Read some police of turn, this is to be develop:

'Grieve an element(s) is returned ours, will examine partorisca any use, abuse, harms, and/or incomplete quantities(comprises chemicals and his pertinent weight). Once a product spends these inspections, calm repayment partorisca a prize of a product minus load of real nave and 15 restock cost.'

Partorisca Arrive to this point has imagined that, with which some cariche varied and of the costs, in better would have a lot little, if any, repayment.

The lesson has learnt.
5 / 5 Jennie
Will be partorisca use this bung English tone exclusively in of the plastic barrels with nylon bungs so that the wear will not be a @@subject but look so only, is molded of aluminium of low note as not expecting partorisca resist up has feigned uses them on closely screwed in drums of steel/bungs.
4 / 5 Louetta
Worthless Unless it plan on opening the barrel already loosened. Orderly 3 and has broken all inside the subject of days.
5 / 5 Jinny
Like a technology of car of the apprentice takes a work of inaugural a bulk barrels of oils, coolant, the clean brake etc. Until I have ordered this tool some technologies before me used and the time has struggled with locks of canal, screwdrivers and pliers. Sometimes it take several minutes and treat add partorisca try to open some of some discharge in some barrels. With this tool augments very small and the times are squandered like these frames that ploughed the easy barrels! It can not believe the person looked for or has bought this before. It had been that the one same way partorisca years!
4 / 5 Asa
The wrench has broken on very first use with roughly 10 lbs of pressure.
5 / 5 Rolando
Is not returned a bung correctly. It break To a plastic bungs. Corner of the boss has not helped torsion of place to a bung.
Dissatisfied.
4 / 5 Jaimie
Has taken it casualidad in this because of prizes. It snap On first use. I have been he advances and orderly Wesco English tones to bronze that has used it for years. Almost four times cost but volume of supposition that paid for here.
4 / 5 Sabina
Has required he for 55 Barrel of Chevron bung. Work but has expected some closely am returned leaves in some holes of crosses, instead is for the lose record like the easiest fact to slip and break a plastic.
5 / 5 Maxima
A bung covers him in mine 55 drum of chevron is too small for a measure of this wrench. Has thinks that that this was the regular measure but apparently a lot all bung the holes are equally.
5 / 5 Lillia
I do with Chemicals in a oilfield as it means stubborn meeting tote atascamos all a tool saved of a lot of cholera outs. Arrived speedily and undamaged. Heighly Recommends this product.
5 / 5 Rubi
Ploughs the barrel, which more can say? It is shorter that thought it would be and has had to that touch around with him the small of the take the grab a bung but work.
4 / 5 Bonny
This are probably adds for a Drum has feigned that cover of Careers of Fuel. I thought it that it do in the barrel of blue water - the almost done except any one enough.

Has estimated drop that five stars like this yes to the a lot likes me is looking hopefully will see of this description. Otherwise Probably is five stars.
4 / 5 Clark
Has ordered to open barrels of storage of the sap when transferring sap. Construction of metal well that it would have to it last for years and the good value
5 / 5 Jude
This bung the wrench is much better that a plastic some, is no where as hard likes steel or wrenches of solid brass I use in work, but are adds for my project of storage of water of house.
4 / 5 Ricki
This product was cheaply has done. It is not quite strong to open drums of barrel and has broken immediately. And it is not long quite neither. I have asked the repayment and has gone to return the product but they have said so only could maintain an element. It is like this economic to do does not want to has to that paid for my nave to return. Fact in Cina. Junk. No shabby.
4 / 5 Diann
Works and has to that it has weighed perfectly. I store some Diesel in 15 Barrels of Chevron have like this drilled the small hole is and of the uses any one 550 cord to join to a barrel manages like this we no misplace the. Which is reason I has ordered the second a.L
4 / 5 Shandra
has Tried all some 'tricks' has found in youtube to take the bung discharges was, but there has not been sucedido. Bought this thing like the last resource and has done a prime minister tries! Have to that have this to start with! It is worth it, included although I have required so only some uses out of him.
5 / 5 Beatris
This thing returns a lot bad to one covers small in some 15 drums of chevron! So only it break it.
4 / 5 Delta
Ossia One of these tools that you really has to that it has to that do a labour legislation. I have looked for to use lock of canal pluers but there is lined some too plastic of discharge. I have required an air of focus he tight and this tool has done an easy work. 16 bunghole Spent later and any some fractions.
5 / 5 Belle
Has used so only this partorisca open my rusted 55 drum of chevron. It was súper easy. I want to that has everything of some parts to any so only open my drum but my big tank partorisca diesel.
5 / 5 Willena
This thing escome' economic/ thin metal but ive has opened 10+ 55 steel drums and any 1 scratch in a tool. Very impressed.
4 / 5 Simone
Quality very good. Has the subject of oil of the waste and some different measures of discharge of drum this wrench accommodates the fact the addition adds to our service of client. Light weight also. Reasonable prize.
5 / 5 Celinda
So only a tool has required in work! A bit tab in an end of a boss has broken was, but this is not the question at all. A boss is so only a right measure partorisca unscrew one covers a small plus.
5 / 5 Hector
Works to the equal that has expected! Order he again and recommend it to another
5 / 5 Jacquie
know a fusion is not a More adds them & feels light compared to another some Ive has used. I have purchased two & one has broken the week. Spent the more he reads precise partorisca more than the week.
5 / 5 Lorine
This wrench is the bit flimsy. We use plastic drums where I and is a lot of plastic of discharge of the stops. This in spite of, does not think it would be good to take covered of metal. It was fearful that pauses.
5 / 5 Edmund
Work. But be clear this is not the opener of drum of full measure. It is way a shorter
5 / 5 Russ
Easily a better way to take and presionar some discharge/bungs in the barrel. If they are not tight some contents can take moisture and interior of air. This wrench really tightns the ones of way that does not filter ,
4 / 5 Ron
would be necessary has buy long fact. Element of good quality.
5 / 5 Leone
Does not use an end of a boss to loosen 3/4' bung, likes the majority is drawn to. A tip snapped was with small endeavour. Hopefully A big end is more durable.
5 / 5 Georgene
Has not had any one creates this existed until has looked for them other tools.
Has drums of adhesive that use in a warehouse, and we always asked the one who this notch was paralizaciones .
This has done things so easier that access a glue.
Perfecto!
4 / 5 Cristin
Need one of these, the doubt would feel to buy is one. But for a record, am using this with the plastic 55 drum of chevron, and concealed can be a reason there is not broken still (likes another there is complained roughly).
4 / 5 Noma
Use to open an oil once the year. So much, I am not concerned too much in sturdiness. If it plough the drum with him, could think before I gave it the good smack.
4 / 5 Karissa
There is broken a backside of a boss in a very first drum. I have tried it open one 2” and so only break. I will save money to buy the wrench of better quality next time.
4 / 5 Marilou
Does exactly the one who his supposition to. Life of the easiest frames in work!
4 / 5 Broderick
Works as it has expected. A lot of gain to open drums and beats

Top Customer Reviews: Cobra Products ...

Rating: 4 out of 5 with 49 ratings
4 / 5
Highly Recommended.
Like a Tool of essential Urban Survival ossia the MUST HAS in the each box and band!
Possesses 5 of them partorisca do sure is always manually in an emergency.

Chris Thorn
DropForgedSurvival
4 / 5
has fill partorisca write-on here:

[...]

Imagine this phase: partorisca any reason, is bugging was, and has to that I travel by means of an urban zone or suburbial, or still to the long of a interstate street. It is hot. Dang Hot. And precise water. There is not very current or lakes or ponds afterwards. At all it is open, and there is any power to operate the car of soda, although it has had an around. Has the container in yours bug-was stock exchange, but need the source of clean water.

Never seen these special taps without bosses in a side of the tent of consolation or gas canal, or another commercial edifice?

Is known like the keyed sillcock hydrant. They are everywhere in some suburban and urban means. They are used to people of build partorisca interview to connect hoses partorisca water to wash footpaths, etc. Is the good bet that almost all have good water in them 24/7/365, if a subject is open or the same no. with a power down, there there is probably that goes to be some pressure has left, which calm to leave you to take some hydration.

Without the sillcock yours, goes to be hard to take water. It takes one for your bug-was-stock exchange!
4 / 5
My coworkers and has lost a tone of water for our work. We buy this the COAs (ours coverage.....) anyways, He that needs to do and has not dipped in of the questions. Llamas that WINS It.
5 / 5
Purchased these for our stock exchanges of emergency of the vehicle. Good product to have to that the facets of waters of the most external access in an emergency. Well fact and offered in the good prize.
5 / 5
Ossia The tool adds . I have taken he splits-time (work of as) like the custodian. This does well for me, and to read other commentaries these hips looks to be usable for travesía. It have not considered that , but probably extra shopping one on its own name, and Navidad presents like this small.

This tone is built to last.
4 / 5
This work for some the majority of common types of taps of water. Without this tool would have had serious questions. Has has not had never a pause, but has lost the little have them like this had to substitutes. Shopping again.
5 / 5
Law perfectly. As it has expected. Value each penny. Bought he for him SHTF,
(sht swipes a defender) but used it day with which have bought he for work. The water required for the pressure that has washed. Unlock Box with tool, attaches hose, turn in waters with the tool and ossia all there is to this. Totally recommend!
5 / 5
Has taken this the toss in with my box of water. Im Planning on that does recognition of bicycle and has thought this could give me the options have no other options and require the source to water while it goes through half of urban areas. Investigation be built like this sturdy like the Wrench of Socket. I have been with this option in a 8 in 1 any sure I of has had any use for some characteristic additional. It was advantage to believe was for functions/of marine boat. Appearance I of the that live to complain no in that there is . These looks to be the solid option for my planned needs.
5 / 5
Has bought this for my take stock exchange of house. I really like an idea to be prepared in the chance has required to leave my car for some reason. Felizmente, has not had to use this product still, but am sure that do. Some sockets look a right measure and a tone is a lot of sturdy and to seat likes is good quality . To good sure thinks that is to say the necessity in any urban takes stock exchange to house/prepper stock exchange.
5 / 5
Had seen these recommended in of the canals of Youtube different like the 'hack of life', prepper tool of type. I looked him it see it on the east a highly recommended. It was wary but said the one who a heck. A tool has received feels a lot of fact, cut well, has finalised with accuracy and has surprised heft his. I tried it it was and work. It has not marked a surface of a tap or tool. I am impressed, ossia the good value .
5 / 5
Ossia the tool adds . I have taken he splits-time (work of as) like the custodian. This does well partorisca me, and partorisca read other commentaries these hips looks partorisca be usable partorisca travesía. It have not considered that , but probably extra shopping one on its own name, and Navidad presents like this small.

This tone is built partorisca last.
5 / 5
Fill to write-on here:

[...]

Imagine this phase: partorisca any reason, is bugging was, and has to that I travel by means of an urban zone or suburbial, or still to the long of a interstate street. It is hot. Dang Hot. And precise water. There is not very current or lakes or ponds afterwards. At all it is open, and there is any power to operate the car of soda, although it has had an around. Has the container in yours bug-was stock exchange, but need the source of clean water.

Never seen these special taps without bosses in a side of the tent of consolation or gas canal, or another commercial edifice?

Is known like the keyed sillcock hydrant. They are everywhere in some suburban and urban means. They are used to people of build partorisca interview to connect hoses partorisca water to wash footpaths, etc. Is the good bet that almost all have good water in them 24/7/365, if a subject is open or the same no. with a power down, there there is probably that goes to be some pressure has left, which calm to leave you to take some hydration.

Without the sillcock yours, goes to be hard to take water. It takes one for your bug-was-stock exchange!
5 / 5
A must has for any bug of survival-was stock exchange. This handy little gizmo can turn in any square external tone spigot in almost location very fast feed - a lot of that imports yes require to take the transmission while in a movement. A so only downside to this product is a weight of this element. It looks weighed and has not been ideal for the light band. Better for the box of vehicle.
5 / 5
I have bought this partorisca my take stock exchange of house. I really like an idea to be prepared in the chance has required partorisca leave my car partorisca some reason. Felizmente, there is not had to that use this product still, but am sure that do. Some sockets look a right measure and a tone is a lot of sturdy and to seat likes is good quality . To good sure thinks that is to say the necessity in any urban takes stock exchange to house/prepper stock exchange.
5 / 5
Has bought this with some hopes to access a water in a side of our paving. So only it can take the turn of neighbourhood or less when I have looked for to use this tone, as it was useless mine . Now it seats in a drawer like the weight of paper.
4 / 5
Hanged a lot his so much his not going to break yes has to that apply some his pressure when that opens the valve of water has stuck. There is has not had to use it still but maintain he in BOB / EDC box for situations of emergency. Impressed with a quality of a tool.
4 / 5
When Precise use the sillcock yours, does not have any a lot of other tools can improvise with, as I recommend that that has this tool manually. This will leave you to access any source of external water of almost any edifice, in chance of emergency.
4 / 5
The element adds! Well fact and literally returns everything, anywhere. Usually I owe that spend & jugs to change to water to rinse a muck of my dogs (6) first to dip them behind in his car chairs in my Row Rover😳 .. Never again! Really it wishes it has thought them in fact these years. Planning dipped one by all the world is half navideña this year sure!! Highly recommend. A+++++
4 / 5
This has not been done to return your common water spigot. Each one which so returning is stable no grooved. One returning will turn a spigot on and was but finally will undress some grooves.
5 / 5
Has been looking for an of these for the moment. I do not see an immediate need but is good to have on in my box for unanticipated circumstances. A compraventa well in my opinion.
5 / 5
5 stars, roughly like this simple of the tool to the equal that can come up with. It is done properly, durable, and does a work was has announced stops. I have it quell'utilisations so only once like this far, but ossia all precise to revise something this simple.
4 / 5
Ossia The must has for BOB or Go-stock exchange. Construction of metal but economic. As any reason any to have one. If you can not access the bib of the hose and a dog goes thirsty....
Justo sayin...
5 / 5
Good element partorisca maintain in your stock exchange of emergency, or still in a @@@glove compartment. Calm does not know never when you could be require the. I give peace of alcohol. Fact very well, likes like this images the wrench of socket partorisca be.
4 / 5
Has launched this in a stock exchange of emergency. It is exactly as it was announced and was also a lot down side. Ossia Roughly all can say you.
4 / 5
Did not use It still and hopefully will not require to. Bought the in chance that the material goes lateralmente and the volume stuck in a city to somewhere. Calm does not know never.. It produces done well.
4 / 5
Level Sillcock the tone but was the averages a prize of a hardware of tents of venues of big box. Good election, good prize.
4 / 5
This device will go in handy when a SHTF, so only another way to find the water without that has to that trust grocery tents partorisca water
4 / 5
after looking stirs of urvival' youtube has purchased 5 of them partorisca each of cars familiarised, my rucksack. Better prize in Amazon and and-bay and solid included compare of more expensive some.
4 / 5
Are in a paving with the enclosed spigot. I have required this partorisca take water and works perfectly! 4 different measures according to type of spigot.
4 / 5
Ours the new house is now old. Required partorisca close was the water supply and a boss have broken. This left partorisca close water. Good tool partorisca have
5 / 5
has bought this partorisca use while doing GORUCK chance, especially 50 Mike Starcourses. It is exactly that has required partorisca those aprovisiona in a half of nowhere.
4 / 5
Fact very Measured and convenient. The sockets are precise and a chrome plating is of good quality.
4 / 5
It is returned each box of the lock has tried in a zone of New Orleans more orders.
Perfecto partorisca one ' city' the stock exchange gone.
5 / 5
Luz, but sturdy! Load of port, Lowes, & Imposición of House (I alive in the small city) any eve know that asked him paralizaciones! Thank heaven Partorisca Amazon!
5 / 5
Has estimated the 4 how is the good tool but where some two canes fulfil is opened. The mine is the potential fails point if this tool. It can have been welded partorisca the bond the strong plus. Also the place partorisca moisture partorisca go in and rust. He so that he he far his work as it has expected. It spends one in my truck and one in mine GHB.
5 / 5
An only tool partorisca a modern adventurer. Any only partorisca your plumber. A urbanite the tool of the surviving to access to water in those out of a way situates that a boss is not there. The must has partorisca a traveller of street also. Access partorisca water in stops of truck and zones of rest with outsides spigots but any boss.
4 / 5
A must has partorisca all peppers there. With this tool one can obtain water of unusual sources.
4 / 5
Maintenances this sillcock yours in my stock exchange of survival in my car. Calm does not know never when I need some water supply of emergency
5 / 5
has Used several times for week in of the commercial establishments. Well build, just prize.
5 / 5
If you are the EDC, ossia the must !! Especially in an urban area
Mines in mine GHB.
5 / 5
The surface is the little rough and thinks that a prize was the little big, but the works partorisca his purpose have feigned.
4 / 5
If alive in an urban area, and rucksack the plot so only felt.
5 / 5
That is supposition partorisca do ! The value adds solid piece of metal!
4 / 5
This tool will leave waters of volume of all the classes of edifices with outsides spouts,,,,of course with permission,,,,,wink,,,,,
A tool of sum of urban survival.
Also can buy the Lowe$ and H0me dep0t

does not spend this an up... It see it used in New Hampshire in the stop of enclosed rest , was tap lateralmente, partorisca take water partorisca clean on the ailing creature.....

Takes an although has the habit partorisca fill on the car radiator.....

Taking?
4 / 5
When An apocalypse comes and your water partorisca look for, calm will wish you has had this! In a moment, it seats quite tucked was in BOB. 😂
4 / 5
Ossia One of some scarce chances where was although it is economic was extremely sturdy and durable
4 / 5
the Ours the new house has come with an outside spigget concealed has not had the boss. This returns perfectly.
5 / 5
Perfect element for a prepper box of tool. Ossia Roughly that.
4 / 5
Heavy and sturdy. So only it take this, and work perfectly.

Top Customer Reviews: AmazonBasics Hex ...

Rating: 4 out of 5 with 60 ratings
1 / 5 Deeanna
Any COMPRAVENTA THIS!

Some mamma of wrenches, shapeless to use and one of them has broken immediately in my first use (ails any pressure has been applied)
2 / 5 Tamara
It looks for manufacturer to be included like Aukey/Taklife
The difference of Aukey/Taklife these have a measure impresa in a carrier, but is not a domestic printing in better sets.
Chroma The vanadium stamped wrenches in of the terrible carriers.
Fallen of wrenches out of carrier when turns the on.
Purchases the Bondhus or Elkind is more than an user of occasional light.
3 / 5 Joanna
Allen tones, as announced, but is very for some organisers that has ordered this together, and is very convenient.

For some slime to reason the oil gone in of machine. The May HAS SEEN this with any allen the wrenches has purchased in a past, and suspect me that it can be it very oxide -prone. Owe the down repeatedly and my hand still takes the covered every time uses them.
5 / 5 Suzie
I bought it to fix the loose chair. A chair is the $ 50 chair of Walmart concealed bought in 2017. It have substituted a chair but I have remarked had the little of the rays that the together semence and my any screwdriver of access. Could see it it was the 'hex' band but could not measure. For less than $ 12 and the week to order, two very done, very tagged (voice other photos) together of the heavy sake has done the tools are arrived in the amiably cushioned box that it went it to it an access of measure by exact right for some tools. I have guessed in metric and has tried 6 mm then 5 mm, 5 was one by right of exact access. A help of balloon/of tower of upper final a tight ray manually although it is afterwards in a rest of arm. There is a chair re-totalled in the little of the minutes and he are so new, any squeaks and when being more stable. This will be the addition adds in my small drawer of tools for interview of contains and will be sure to tense a lot of rays of loose futures of the big variety of measures is provided. Certainly cheaper that that buys the new chair and having a unuseable old one to recycle!
3 / 5 Tequila
I have been attracted in a prize of these wrenches. Of the this has learnt to use in a tent of machine, is not quite durable for only has to has weighed. Has the tones have begun to the round was or a metal these transfers. That is to say well for uses that does not require heavy quantity of torsion.
1 / 5 Porsche
Purchased this of Amazon.com with same delivery of premier of the day. I add!
Until I have opened a container to be hailed with the horrible greasy smell. I imagined it it was it was to to the fashion likes him left the only in the my garage for weeks. In the drawer. It opens His outside a period of tower and still has the horrible smell. I have tried to use this today and expsito that each which so one is coated in the cloak of big (how WD-40). In fact the mine hangs in the to to still smell likes him afterwards washing he of the small time. The own elements of the amazon are praises for good quality in a prize abordable but I steer out of of the this.
5 / 5 Charlette
These are tones of utmost salvation /allen wrenches. They take a work has done, tent in the compact form, and some titulars do the work adds to maintain them each what together as I do not lose a need of measure. All some measures have required has been comprised in this set. Any active angled or use smashed into, included a small ones. Excellent value.
2 / 5 Sabine
Enough level hex together tone. It has not used The still but can not imagine will have any surprises there. Apresamiento Was 1 star for each of 3 reasons:

1. The packaging has suffered harm and rasgado and some cases of storage are soiled and shabby look.

2. The cases of storage is loose and very firmly controls some wrenches. If totality has lined any one, some wrenches will fall era. This goes to be a subject with them sliding around in the toolbox or in some vain.

3. Some wrenches is coated in this failure that smells the typical sticky preservative of factories of Chinese tool.
1 / 5 Savannah
These wrenches have looked totally slathered in fat industrial. I have tried to wash a fat has been with soap and of the water in any utility. Worse even so immediately begun to rust. To do a worse same experience, any quantity of the wash of delivery has taken a dominant smell or slick listen hands that a big left wing by behind the marks of hours. Purchase of the different mark.
5 / 5 Oda
As all have seen with a name 'AmazonBasics' these is the quality adds and very can take the sake cranking on to tense with out undress was. Use so that it craps allen junk the wrenches and these are quality very better. The only bad thing could say is wow.. An oil has used to to protect them there is a terrible smell. Yup, That is to say an only bad thing ..... :)
4 / 5 Cory
These am very strong. I have been abusing them and does not break or curve.
This in spite of, a boss rounded that leaves partorisca rotation and diagonal entrance, although a awesome characteristic, is inconsistent among batches. I have ordered this dips two interior of time 8 weeks. A prime minister near is perfect. A second set there is improperly has has formed bosses, some the hexagonal bosses little rounded in a fund is not all quite big (does not match some dimensions of a rest of a wrench is the part of) and any quite a form of round has to that be. It looks the defect to manufacture that sometimes a bit there is rounded the bosses do not form properly when they are launched or this in spite of are done .
5 / 5 Doretha
These are utmost hey tones/allen wrenches. They take a work done, tent in the compact form, and some do any the work adds to maintain them all near as I do not lose a measure I need. All some measures have required has been comprised in this together. Any one has bent or broken into use, has included a small some. Excellent value.
4 / 5 Johnsie
Quite regulate hex conjoint tone. Not Using still but can not imagine will have any one surprised there. Taking was 1 star for each of 3 reasons:

1. The packaging has suffered harm and rasgado and some chances of storage are dirty and shabby looking.

2. The chances of storage are loose and no securely control some wrenches. If any whole has resisted, some wrenches will fall era. This goes to be a subject with them sliding around in the toolbox or in some gone.

3. Some wrenches are covered in these foul odorando sticky preservative typical of factories of Chinese tool.
4 / 5 Jenniffer
Has done in the VW spent of valve with on ray of boss of Allan last to achieve place. An end of ball hex the tone has saved a day and he has been rid so only required it at the same time. Thank you Amazon, thank you Prime ministers. Saved weaves it to me of degradation. A torsion in some rays of the coverage of the Valve is minimum to the equal that can very really say like this will resist up under the plot of torsion, but if they any I kings-informs. A look a lot of fact and some chances are the plus . Very easy to maintain organised. You recommend.
4 / 5 Haley
Loves this together of Allen wrench. I bought it initially for presionar some handlebars in my bicycle in university, but do fault very on some years in a lot of projects. The value adds for money. If anything was to spend to my Allen wrenches, would buy this neighbour included again. They are not the professional for any half, mostly one gives support, but think that these would be the addition adds to any one is toolkit. To good sure recommend these.
4 / 5 Bertram
Until now it have it so only misc hex the wrenches that dips around and never looked to have a legislation one has required for something. Decided to so only take the together. Invernadero These for the really economic prize and there is pulled a trigger. I owe that say when it take these was pleasantly has surprised of well look. To good sure have some quality to them. These am returned a bill amiably. It does not have to that concern roughly having a right measure now.
5 / 5 Christopher
A lot a lot can say roughly ossia exactly that has ordered is that it is is in fact perfect does not think will require to buy any wrenches anymore has each level of measure and metric was so many things when being voters is perfect of presionar up like things like scooters and bicycles like this he the aces to elements likes him that of calm to good sure the require the thing is to go the long time without having Titán @ of the things will break and so only presiona my scooter and feels so more sturdy
4 / 5 Ervin
This neighbour is roughly a same cost like Craftsman metric spouse that has purchased recently. A question to frustrate with a Craftsman the neighbour is a difficulty in taking some wrenches, especially some smaller wrenches that requires rotating some main wrenches to take a wrench has wished.
An Amazon Basics the headlines are hinged so that some the smallest wrenches can be rotated was for the easiest accesses.
Some wrenches is good quality .
4 / 5 Agripina
I tones take a work done. This in spite of, economic celery and curve easily. I have not had some for on me still but am not surprised other users have. The worse part roughly is a terrible smell has. Smell of mine like the mildewy rag this is to remain in the tank for days. Still after leaving some wrenches were for several days, his still reek. Worse of everything, anything concealed his key reek. They are not one to be nit picky or too critical but a smell is so only like this a lot penetrating.
5 / 5 Eartha
Like this all have seen with a name 'AmazonBasics' these is the quality adds and really can take the good cranking on for presionar with out undressing was. I have used so that it craps allen junk the wrenches and these are quality very better. The only bad thing could say is wow.. An oil has used to protect them there is a terrible smell. Yup, Ossia an only bad thing ..... :)
4 / 5 Maye
It DOES not BUY THIS!

Some wrenches suck, shapeless to use and one of them snapped immediately in mine first use (grieves any pressure has been applied)
4 / 5 Yen
Look partorisca be costruttore same like Aukey/Taklife
The difference of Aukey/Taklife these have a measure impresa in a carrier, but is not a domestic press in of the insiemi better.
Chrome The vanadium stamped wrenches in of the terrible carriers.
Fallen of wrenches out of carrier when you direct them on.
Buys the Bondhus or Elkind is more than an occasional light user.
5 / 5 Nikki
Tones Allen, as announced, but is really partorisca some organisers that has ordered this together, and is very convenient.

Partorisca Some slime of reason oil gone in of car. I have not seen never this with any allen the English tones have purchased in a past, and suspect me that they can be a lot rust-prone. It has had to that dry them down repeatedly and my hand still takes covered every time use them.
4 / 5 Gerry
Has been attracted to a prize of these wrenches. Of the which have learnt to use in a tent of car, is not quite durable to use to have that has weighed. Has the tones have begun to the round was or a metal that turn. Ossia Well for uses that does not require heavy quantity of torsion.
5 / 5 Rina
Bought it to fix the free chair. A chair is the $ 50 chair of Walmart that has bought in 2017. It have substituted a chair but I am remarked has had the few rays in the resistant together and my no returned screwdriver . Could see it it was the 'hex' ray but could do not measuring. For less than $ 12 and inside the week to order, two a lot of fact, very labelled (sees other photos) conjoint of weighed a lot has done the tools have arrived in the amiably cushioned box that it went it an access of right measure esatta for some tools. I have guessed in metric and has tried 6 mm then 5 mm, 5 was an exact right access. Some help of on duty/wheels upper final a tight ray manually although it is afterwards to a rest of arm. I have had a chair king-gathered in the pocolos small and is like this new, any squeaks and feels more stable. This will be the addition adds my small drawer of tools for interview of house and will be sure for presionar a lot of loose future rays of the big variety of measures are resupplied. Certainly more economic that that buys the new chair and having a unuseable old one to recycle!
4 / 5 Cecille
Has purchased this of with day still first hands. I add!
Until I have opened a container to be hailed with the horrible greasy smell. I imagined it it has been it was to manufacture like this left the only in the my cochera for weeks. In the drawer. Now his outside a period of turn and still has the horrible smell. I have looked for to use this today and expósito that each one which so one is coated in the discharge of fat (like WD-40). In fact the mine hangs to to the still smell likes afterwards washing he of the little time. The own elements of the amazon are known for good quality in a prize abordable but I steer out of the this.
5 / 5 Chery
Can not recommend these. A material is a lot low quality likes these will not resist on low any type to use this requires the modest quantity of torsion. I have asked the repayment and has received that quickly and has purchased the substitution of name of the mark.
4 / 5 Forrest
These wrenches are looked totally slathered in industrial fats. I have tried to wash a fat was with soap and of the water to any avail. Worse this in spite of immediately direct quell'rusts. To do a worse same experience, any quantity of the wash of delivery has take a penetrating smell or slick feeling of my hands that some the fat left behind hours done. Spent of the different mark.
5 / 5 Guillermo
Each thing has has not bought never that has required the hex English tone to gather has come with one, and is probably all tossed in your box of tool. When I Need a ossia so only slightly main or smaller that a a you grabbed was, goes to squander the plot to time to hunt and comparing. I have bought included the together of the tents of hardware so that would have an each one that like this of all the measures, but are not measured like this a lot of like this dipped and has not had the convenient headline to the equal that am come from to free the majority of them there is like this taken mixed up with all a freebies.

This neighbour feels durable, and a chance is quite handy that could not lose any of these. You can grab a together integer out of your toolbox like the alone unit, and then turn each wrench was to try his measure in yours ray before you take one. I think that that it is a key to maintain me to take more than one the time, which would be a way these some would take lost.
4 / 5 Elissa
Ossia An offering of amazing product . It was the little has concerned to go to take something low quality at the beginning, but was pleasantly has surprised that these are like this well has done. I can you do not say how long it has had to that go looking for and looking for some few tools send calm in of the boxes of assembly so only to come up with a wrong measure - of then buying these has used the at least the time of dozen for different elements, in that save me the plot of frustration. Well value a cost. So only know that they come coated in the fat/of oil to the equal that has something ready to dry them down.
4 / 5 Leonardo
A lot, a lot low quality. Also coated in smelly oil to perhaps prevent corrosion that scrollings to your hands every time look for to use them. It can not use. Neither it can store with other tools in stocks transmission because of residue of oil and extreme smell.. Expected for the moment before writing description to see if an oil and the smell would go era. He no. Also the precision is a lot poor especially in some smaller wrenches. It does not return to the ray begins a lot well. Window further of turn of the product now like this I so only tossed his in some rubbishes. My substitution of the mark of Stanley has dipped of the local tent is perfect.
4 / 5 Nicholas
Has bought this together to substitute the place ossia very old. Some flanges rounded and was hard presionando these hex rays that is distributed in the plot of diy elements. This neighbour is easy to resist, presionar a hex ray or ray a lot well. An end that has some works of ball also. Rule and metric is some 2 insiemi take and like me a bit titled. A measure is etched in the each piece also.
4 / 5 Erich
I work like the movement of mobiles and take avert and dip the pieces of furniture joint the little week of time. Really I can you do not say that which has dipped use one the majority of, and has has used perhaps each key at least once. This in spite of, which have used work, feels comfortable, and quite strong on some slightly tight hex / allen rays.
4 / 5 Deann
For a money touches the neighbour adds for works read. Toys Small Appliances etc.

The measures are perfect for tiny rays without buying the together special for that.

Are happy. It can take another to maintain in a truck.

Adds for works of general house and has been that resists on well thus purpose.

These are not for heavy works. But all more are hard to beat.
5 / 5 Ernest
Some wrenches are good quality , big steel with each calm measure never need. A question is that they are has arrived covered in packing fat. It is like this bad that calms will be necessary the clean previously to the use and the heaven help you to you takes fat in your hands or cloths. It does not exit without gojo. Amazon - Please left your costruttore knows that they require to take a fat to pack or lighter gone of WAY on that.
5 / 5 Humberto
Ossia The together enormous of Allen tones. It weaves to have more tones here that has thinks that was to take. I will not be never in the loss for a now. I have had really so only taken this together for roughly 3 of them lol. An only thing I aversion roughly is that an end of king has the ball in an end. Sometimes it likes-me the law with this side. Otherwise Perfecto
4 / 5 Lajuana
has Bought he so that it can have him around my house and for use in mine in current kart some have light transfers in them or is not perfectly 90° but take a work done so that I bought them does not have to that run to do while I require them now Require to take something really tight has taken the together good in acting otherwise these will cure of a @@subject
4 / 5 Suzan
has bought this together like the together of backup, and has begun to use his mainly to try them.
Some 2 smaller measures have broken a lot easily while using them (was tenderly).
Has come for odorare a lot that fat, which kinda suck.

I supposition is a good value for a money, but highly recommends to take the main quality some.

Goes in thumbs as well as millimetri, as takings 2 insiemi for a price which is a lot of (but is still súper odd, in place of just that declares a measure in both mm and thumbs).
5 / 5 Shizuko
In a past has stuck with Craftsman tools for a guarantee. Now one is not even the Sears anywhere approach me to me. These were the really good prize , as it was fearful would spend was quickly. But, no, they are resisting on like this well add a Craftsman has done. It likes-me a plastic headline. It is easier that take some the main wrenches were. Utilisation these daily.
5 / 5 Romelia
Has required the together simple of tools for the work and one the compact plus could be, some better. It take these , added some hot measure has coordinated shrink still to tube to also identify them like this mine (the tools grow legs in a tent) and perfects . Good quality for a prize and a tip rounded is exactly that has required.
5 / 5 Claudie
There is driven throughout to several tents of hardware and could not find small hex tones anywhere.
Has then found these on Amazon, and was in mine doorstep a next day!
Exactly that has required, the quality adds and the selection adds measures.
Thank you Jeff - Or shd been in poster prez
5 / 5 Clemente
Ossia perhaps my description of prime minister of negative amazon. The inaugural a box, immediately gagged of the heavy smell of oil of car. Some wrenches are slimey to a touch because they are lathered in oil. I have it that has not had never Allen tones comes like this and ossia quite gross.
5 / 5 Darrell
These things are of sound. For less than $ 20, it take the quite complete Allen wrench conjoint, both metric and level, this manage all my requirements of house. If they break? As that? It was not expensive in a less.
4 / 5 Rod
These are enough in pair with all another Allen wrench fill conjoint. Rings a together economic to maintain in my truck.
These are less expensive of the majority and coming with the good quantity of oil that maintains them of developing rust while in storage, but can require be dried down first to store in your vehicle.
4 / 5 Laurinda
A lot a lot hex box of wrench. Good access for some bosses of ray in that used that, like this far so only for mine 3D printer. But reason do these things owe that be like this greasy? I have had to clean each one which regarding the take so that it was not drenched in oil.
5 / 5 Hellen
The product adds, the tool adds and abordable. I have added this my stock exchange of tool, but has wrapped he in the towel of an oil this is to require to maintain to maintain these tools to rust.
4 / 5 Vi
These are utmost! I want to that has a wheel on one finalises to return to something tight or imprecise fittings. Totally recommend this require the together of hex tones.
5 / 5 Nelly
Each type would owe that have the together of these! It looks to be fact well and a lot of sturdy. Really it adds that they will remain organised and have an option to use a angled well for the hard-achieve places
4 / 5 Scotty
Exactly like this described and perfect so that I required him paralizaciones. They are stronger that has thought and returns perfectly. The wrenches are especially for a prize. Shipped quickly
4 / 5 Luke
Really like a hex structures of storage of the tones that has resupplied. Has Has time when I have required a particular measure. An end of ball is really useful when it calms can not access directly. Has both thumbs and mm markings. In general the really good hex conjoint key
4 / 5 Will
Of the arrivals of ball how is supposition partorisca resupply 'until 25 terracings partorisca easily achieving around obstructions' is machined very bad. Some of them are well, but another is practically flat and very included resupply the pair of terracings of offset.
4 / 5 Tyisha
These are exactly the one who has required them in the prize adds. The calm often need a allen English key that is not in yours toolbox? Everytime Partorisca me. Fast solution: but 2 insiemi in imperial and metric and forget rifling by means of allen tones never again. They are presented like this.
5 / 5 Alona
Partorisca A prize can has not beaten him. They are less the averages a cost of the Husky or near of Cobalt and like this far with which two moths of daily use the esees has resisted on adds.
5 / 5 Celine
The product looks good but has arrived like this greasy that my hands have been covered in oil with which use. I comprise the fat is involved partorisca manufacture but reason any for the cleaned first to ship to a client? Jesus.
4 / 5 Lashawnda
This work exactly to the equal that has required. Some things of mark of bosses of ball much easier in of the tight spaces. Certainly you recommend these, especially partorisca a prize.
5 / 5 Paul
Good quality partorisca a prize. An used a the the experience has been missing the tone, but, meh. definately A mould of same headline, and probably a costruttore still a lot of another big box the tents spend like his line of economy of final of ball hex wrenches.
4 / 5 Laticia
Good prize in the together decent in both SAE and Metric. The tools have a lot of frames of tool on the ones of machining, the time will say the one who durable is.
4 / 5 Suzi
Together adds to have manually for both metric measures and of the levels that comprises the 7/64' quell'I required for the reparation of tap but my two other insiemi have has not had...

Also, an end 'rounded' was something had not used before but a lot handy and good works.
4 / 5 Cleora
Some finals of these is messed on and out of spec. I have had to take the file to half of a one are has used because of burrs and has broken something.
5 / 5 Clementine
Ossia The add to buy for the good prize. I want like this it opens on him so that it is easy to choose ur tool, perfect for the startup together or to maintain extra around

Top Customer Reviews: Universal ...

Rating: 4 out of 5 with 43 ratings
5 / 5 Brain
I have bought this socket for my dad for the day of the father (seeing a lot of positive critics), and at the beginning look it looked well. But after trying it the time of pair, one of some pins are not returned up. We were able to press he with the small screwdriver by a part, but after pressing a pin in question down again, still does not return up. A cradle or something have to when the be has broken. Of course, there are any police of tower for the this, as I am bonded with the defective socket. If a company can not guarantee good quality in his products, necessity in at least offer some class of police of tower. Any data here!

EDIT: BLENDX has taken note of my description, and since has routed me it socket of substitution, for free. Work well, any one dead pin. Thank you, BLENDX!
5 / 5 Cyndi
It maintains this in our stock exchange of the tool in of the trips of road of the motorcycle. It have to the two times already, works while it has to!
5 / 5 Marilynn
Present perfect for lazy husband! It buys this fresh and present tool in husband likes him toy! It suggests the project around contains to try it was! ( You know a project, a one that goes to do next weekend for a past 3 years.)
Quan New wears of any worry! These products is easy to use for same one the majority of unhandy people. It have to fulfil I am one of them! I screwed twisty things in two pulses and has done the line of clothes with easterly! Alloy in the hammer!
5 / 5 Micki
Good tool to have in your box of tool. It IS very has the bit in easily of use with an engine of electrical ray. I used it the time of pair, but a one am looking the advances is when has the leader that is partially undressed, or has paint in the. As it is no longer an original measure. Sometimes it can use the pair of grips of addiction, but one wins of universal socket he much easier. I require a socket? No, has the full together of Metric sockets and English. That is to say the good back above that saves time. I am out of practice, so no longer can look in the leader of ray and automatically knows that socket of need of measure.
5 / 5 Wallace
Has problem loosening in the ray in the chair. Have take then have this. It poses it my hammer and he have done his magic. I am so happy bought this. He that says.
5 / 5 Dorothy
Present he in the daytime of the father adds for one bursts. Taken up less room in the toolbox that the full together of ratchets, and work also
5 / 5 Lea
This does exactly that it say it will do. Used the to take in 100 small hooks of the wall. It have been almost impossible without him. Well fact and shows any sign of ware after this task has been completed.
5 / 5 Letisha
State doing in my mustang cual I hydro-enclosed, and to the left say, what the relief is to have this thing after in me; and any one 12 different sockets after in me. Perfectly adapt it, and good access and snug, in the each ray. An adapter included is the very well has thought also, especially for unconventional fasteners. Any one much more to say but the purchase adds definite.
5 / 5 Donovan
There it is not using a product has been still bought for project of cradle but like an ascent and advertisings in a product in the facts of television looks that required to do fantastically
5 / 5 Earle
I have installed the porcelain tile in my bath and other rooms are not tool of still.This the very has done well,especially in some describes that is not so cadr.Simple to use and a material is solid.
5 / 5 Truman
I have bought this socket partorisca my dad partorisca the day of the father (seeing a lot of positive critics), and at the beginning look it looked well. But after trying it the time of pair, one of some pins am not on gone back. We were able to press he with the small screwdriver for a part, but after pressing a pin in question down again, still does not go back up. A cradle or something have to that be broken. Of course, there are any police of turn partorisca east, as I am stuck with the defective socket. If a company can not guarantee good quality in his products, requires to at least offer some class of police of turn. Any die here!

MODIFY: BLENDX has taken note of my description, and there is correspondent me of then the socket of substitution, free of load. Work well, any dead pin. Thank you, BLENDX!
4 / 5 Ivy
Absolutely in amazing! I have it that has not had never the tool that has done so much. It operates it in the each measure tried it on. It has not broken still, to sure durable good! It is like this versatile, included to to my woman likes them the use the. It goes in like this handy. It is súper convenient and easy to use. It is small, but manages big works with eases. Taken on hardly any space in my box of tool.
5 / 5 Mardell
Good tool partorisca have in your box of tool. It is very he has the bit to easily of use with an engine of electrical ray. I used it the time of pair, but a an I am looking forward to this when has the boss that is partially undressed, or has produced on that. How it is no longer an original measure. Calm sometimes can use the pair of grips of addiction, but one wins of universal socket he much easier. I require a socket? No, has the together full of Metric sockets and English. Ossia The good back on that saves time. They are out of practice, as I can no longer look in the boss of ray and automatically know the socket of measure I need.
5 / 5 Mammie
This does exactly that it says it will do. Used the to take on 100 small hooks of the wall. It have been almost impossible without him. Well fact and tip any sign of the wear after this task has been completed.
4 / 5 Bryon
Is the very useful addition to your tools. It is fact very good and a prize, unbelievable
4 / 5 Particia
has had this tool for years ,has required another to maintain in my truck ,an if a better artilugio the elements have not used never of dice of the wing the old square dice act on all
5 / 5 Steven
has been doing in mine mustang which I hydro-enclosed, and to the left say, the one who the relief is to have this after what of mine; and any 12 different sockets after mine. Perfectly suitable , and returns good and snug, in the each ray. An adapter has comprised is the very well has thought also, especially for unconventional fasteners. Any much more to say but the definite adds compraventa.
4 / 5 Casie
Life of frames very easy when that tries to find a legislation comes with adapter for my impact! PRIZE!!!
5 / 5 Maryjo
Has taken this for father-in-law of mine the one who has in the each tool there is. I thought it that it was well to have the tool that adapted to a project is doing without that has to that change your tool on and on. You love it! It says that the work adds and the addition adds to that that already has.
5 / 5 Dominic
The present of the day of the father adds for some explosions. Taken on less space in the toolbox that the together full of ratchets, and do like this a lot of
5 / 5 Milan
1. I add little artilugio. So only it has to that be realistic roughly purpose of element. He' any feigned partorisca hardcore commercial application. Enough, it is feigned to be used for homeowners around a house and inside this application is the handy little tool. To good sure recommends having an in a box of tool!
2. The element arrived with an adapter to hammer that loses. The vendor contacted and less than 2 hrs the vendor answered with an email and an annex that objective a bill for the new shipment order. The substitution has arrived so only 2 days later and the vendor no envoy so only an adapter of missing hammer but a together integer. Everything without questions has asked. Now Blendx is taken the client of for life. Nuff' Said.
4 / 5 Tim
Present perfect for lazy husband! Buy this fresh and present tool in husband likes toy! Suggest the project around houses to try it was! ( You know a project, a one that goes to do next weekend for a past 3 years.)
When new Wears of any worry! These produced is easy to use for same one the majority of unhandy people. Have to that know are one of them! The screwed twisty things to two poles and has done the line of clothes with east! League to the hammer!
4 / 5 Jenniffer
This was the offers of Father of Day to substitute some of whole workshop of the tools flown of cocheras. It is very pleased with his action.
4 / 5 Christi
It take it so only! Not to try it still but looks and feels extremely durable. Highly recommend!
5 / 5 Annie
Awesome Partorisca screwing In of the hooks or other uncomfortable bits.
4 / 5 Alejandra
Ossia The really fresh artilugio! Having to that lose sockets and never have one an I need, and now does not have to that . I tried it on several measures and he has done on all like this far!
5 / 5 Sharilyn
Has used so only a socket partorisca substitute the sparking plugs and the transmission of drain has flowed. He that has to that do. Any complains.
4 / 5 Rosendo
Did not use It still but assumes partorisca do a work!
5 / 5 Alphonse
Ossia awesome, like this happy has bought them this. Now my dad wants to one! And wants to take them a main measure also!
5 / 5 Jesica
There is broken in a first use. Tried to take of the ray of the drain and he there is broken. Some pins are stuck in the place decompressed. I have tried to press then behind to plant of an inferior pin and learn the unit has fallen was. To good sure wont be buying these things again.
4 / 5 Soraya
This little tool has looked for to be handy quite the little time now. If has the undressed hex the ray begins this does not have any question that takes the grip. Also I law adds if you are not sure need the metric socket or regulate wrench.
4 / 5 Violeta
Has used this to locate the TV in my wall. Literally first time has taken a ray in a wall, one of some pins is falls was and another is ready to exit. Throughly There is disappointed in this product.
5 / 5 Cyndy
Was skeptical, but he in fact works. I still under the tonne of controls up and is súper easy to do with.
4 / 5 Buffy
The better whole has not bought never fact very very that says that it goes partorisca do
4 / 5 Herta
Ossia the element adds . It was the pocola operates real well. You owe that dip the little pressure in the he so that it maintains the contact with a ray is trying to take. But it is better that that it has to buy the together of whole socket, especially if no utilisations sockets that a lot. Well he also!
4 / 5 Carmela
Maintains this in our stock exchange of tool in travesías of street of the motorcycle. Has has had to that use it two times already, works to the equal that have to that!
4 / 5 Demetra
Has bought stirs it of these partorisca give like this present. All the world has wanted to him. I have used also a pleasure the present of white elephant a lot really struggled writes on that.
5 / 5 Aide
Total rubbishes. There is not coming with any packaging. Some pins do not move freely and take stuck.
4 / 5 Mariela
The concept adds, poor execution. These no very at all. I thought it that it was the tool adds partorisca when it calms can not find or is too lazy to take a right measure. Some jumps behind some pins are too many strong and is difficult to maintain the pertinent access during using reason presses behind against you, ossia particularly the question with rays that has tapered final or short rays. I also found that still when properly situate this does not resist a ray a lot well. I have bought two of these before it has known them and the remorse. An only good thing is that an adapter of hammer will be useful, a socket so only will seat around partorisca when I am exasperated.
4 / 5 Gussie
Was having question loosening on the ray in the chair. I have then agreed have had this. Dipped the in my hammer and he have done his magic. They are like this happy has bought this. He that says.
5 / 5 Maureen
No like this announced, bite very superficial on boss of ray, nails so only go in less then the thumb of neighbourhood. It do not bite the die of wheel of the bicycle with protruding to to the ray likes him to him the frame aims how is reason have wanted to it partorisca maintain in a trailer partorisca some bicycles of girls. The failure that announces. Overpriced No shabby.
4 / 5 Elli
This will not return on more line because a pegs will not go in . When Calm take it on, a cradle-loaded pegs the retreats of push was way too easily. It is the useless piece of junk that can not take the repayment on. It does not squander your money!
Update: a company was utmost and quickly refunded my money, included although an element is not eligible partorisca turn. Terrible product, but service of good client upped an indication to 2 stars.
4 / 5 Gertude
This produced are add partorisca any DIYer is or tool of the masters of box of tent have experienced. Has the bad habit partorisca line rays so that it is partorisca say gain to maintain in my box partorisca that and his to plot easier that use this partorisca dice and rays quite then the wrench so that it is to say my tool of election for that. A reason gives it four star is for two reasons one begins to rust on me but also partially my failure of the leave external but a second main reason for some four stars is a lot always grab to rays that can be frustrate especially when his undressed.

Global I defiantly recommends this product for any box of tool.

Top Customer Reviews: TEKTON 3/8 Inch ...

Rating: 4 out of 5 with 60 ratings
1 / 5 Marcelo
Undressed Two coverage of rays of valve in my BMW which cost me the plot of the money in acting to repair and new rays. He very click in of the parameters of low torsion. Very disappointed when buys there was all the classes of recoveries of precision... It opens it Sees another is unhappy with him mass as it do not blame me anymore! UPDATE
after writing this description has tried to return a unit after a period of the turn has expired. Desprs Contacting a company has counted that you HAVE TO store a torsion the wrench is by train to pose him lower, any low which are possible this has done. I thought it always it have to the be posed under any parameters for the maintain loose but has said any torsion the low tomb the parameter or he can lose is calibration . I issue me the new one which only took. It does not use the newspaper but will update on does in the low torsion that poses later.
3 / 5 Bethel
Experience a 3/8.n Strolls Tekton wrench of torsion. Well out of a box has tried to adjust a torsion in 20lb/ft. Of 0. A wrench has listened to like it has had something internal that impeded he to turn, as it closed up in around one 10 parameter. Sounded likes him the fragments of metal leave interiors of machining, or possibly only a cradle that mark a sound. Turned behind in 0 and adjusted it again and begin to close up with a same metallic sound, but the marks spends one 20 parameter, maintained to tense and loosing an adjustment and attached some spray lube. A wrench has begun to do well and adjusts of 0 in a maximum 80lb/ft. The easiest plot now. A second thing concealed and has remarked was that a parameter of stairs of the centre has not matched up with a cape of adjustment in a zero. Quan Has posed a torsion in the parameter of 20, 30 40 or 50 etc. A centre will not vary in zero in a cape. A zero this 2 marks was. It likes 52 equals 50? If that is to say for aforar then 50 would have to row with zero in a mango.Tried a parameter in 20lb/ft and a wrench has the strong click in the to the east likes me. In a future probably will spend an extra money and purchase the tool of plus of recognizable mark by name.
1 / 5 Nigel
1/1/18 - No impressed. A 0 mark in a cape does not vary with some indicators of book in some stairs localised in an axis of a tool. So you are trying in dial in in one 50lbs the marks in fact have to turns in 52lbs in order for an indicator to be diverse. Like The result, try vary a zero with some stairs is unsure if yours in 50lbs or the indication of torsion smaller. Any one exactly the ideal date an use/of purpose of a tool.

A tool was like this out of one that box finds ironic given an adhesive in a tool that reads 'Tekton Aforado and has Tried.' Really? Any one very tries this tool before the routing was? This is not that expected of Tekton, especially for this type of instrument of precision.
1 / 5 Rossie
I have bought this to do some cover in my truck. Side of the law am guessing in a value of low torsion which think was around 15 ft- lbs. Fastforward, is substituting the perch in a suspension and he have asked something around one 40 ft-lbs and a wrench never clicked signifying has achieved a value of torsion. The decrease of long history, has twisted dulcemente a cape immediately a ray and I are doing the trip in a tent buys the torsion English tone that law and the new ray. Any compraventa this cheap craps, has learnt my lesson.
4 / 5 Marquita
I have required the torsion English tone to do work in our carts. Well, for earnest be, required to do work in our carts, and has decided that soyquired' the torsion English tone. Apologies to buy the tools are always the good thing.

Was in the only principle goes in nip on in Sears and buy the Artfice. Even so, I have been horrified to discover faith that small has in some of his products these days; the artfice usual lifetime guaranteeed of tool of the hand does not apply in sound in wrenches of torsion, and is substituted instead for the guarantee of 90 days. Three months? That on coast?? I guess that it is what apresamiento when you outsource in China.

(Source that of May 2014: [...] )

Horrified, Turned in Amazon instead. It breaks - on it is too rich for my now same blood, but considered to choose in the CDI wrench (and in a long career, beat still). Mor That often is likely to use it, imagined would begin in a low end of some stairs to price only to see that it was available. I have found this wrench, and although it is not done in some the EUA (fashioned in Taiwan) Tekton is the company of EUA that research to be easily traceable in case that any one questions/preoccupy to burst up. An included tin very when be pas said of the plot of a fact-in-material of China. Also they look to maintain an eye was in Amazon for those with problem, which are often the good signal.

Out of a box, a wrench enters the reasonable case plastic quite red. It is not a plastic a heavy plus known in humanity, but is not a flimisest or. It looks quite adapted for a purpose, which are very enough. A wrench has the decent heft in him, and does not give an impression to be cheaply has done. A ratcheting the mechanism in some looks of boss quite smooth.

A thing that has taken my eye in this Tekton the wrench is that they have filled some stairs in an axis in black. These sounds like the trivial thing, but that or little mark to change to read and that poses a wrench infinitely more mere that in other tools. I am the enormous adherent of laser-etched sockets with big figures , clear in place of marks to focus vain (has Stanley has posed that it take prende cheap that is to say etched); they are that much easier to read.

In all the case, has tried the pair of mere works with an informative wrench, comparing it against the CDI wrench apresamiento loaned of work. I the change of cover and a change of oil, trying tones so English in some same works. In general, a Tekton is the tool that listens solid. A mechanism of torsion of the adjustment any one when being very almost so smooth and CDI, but in the neighbourhood of a cost, is more concealed had to go through big concealed. A parameter that afterwards the mechanism is also far more mere that a a Artfice has law ( has some class of eighth-gone back to close ray that does not remain never place)

A Tekton does not give the audible massive click when a torsion of together is achieved, but found a motion in a point of together was quite obvious when the paste he.

Could not listen any discernible the difference compared in a CDI English tone in of the terms of precision. I have tried to tense in some two frame required for a work (13 and 28 ft-lb) initially with a wrench and then verifying it against another (and addiction-treat), and expsito that neither aimed a lot the difference. Still in a defiant plus 13 ft-lb parameter (torsion of click he wrenches that is notoriously less accurate in an end subordinated of his stairs) has found any real difference in the behaviour of any wrench.

Donat A period of a cape, paste 80 lb-ft could be the optimist bit. This has said, can not think of any work is likely to do in the near future that would require that a lot of oomph.

In general, is very happy. This investigation is the better tool that had expected in this prize, and data a cost is probably the better tool that some merits of prizes. It researches to be quite accurate (with an usual caveats this applies in all any-torsion of wrenches of the beam in some subordinated finals of his field) when compared with the much more expensive wrench, and although I have not required he for a pair of works has so done far, an ease to change among level and left-handed tense looks to the premium compared with some wrenches in this field to price that the only can any one concealed.

My only niggle is with a sweetness of a cape when turned to pose a torsion has wished. To want to of the better term, is the little in a graunchy side. But for that, this easily would be the product of 5 stars. Included then, date what economic this tool is, is not never so afterwards to take full marks, but I like my tools to have the be of tactile sake in them, and these some ways of appearance can very enough gives it the upper bookmark. Work very enough, but only when being the small was.

Called the 4.5 to amazon would leave me...
5 / 5 Zelda
Decided to try this Tekton torsion of wrench to mark so that they look to have support of stellar client on all his products.

This wrench enters the red of case of plastic takes, together with the manual that would OWE read you . I think that that that is to say something the plot of the people that gives negative critiques probably skip.

Once comprises one issues these works, and marks sure to maintain he in a minimum indication when stored or doing other things with a wrench, would have to when being well to go.

Looks very very built and has the good weight. I used it to change impacts and cradles and has had to several fields of torsion. A click was easy to comprise.

Will be to do more work any coming weeks, as I will update if anything changes.

In general, looks the tool adds, would recommend 5 out of 5!
5 / 5 Chastity
For a prize, does not take any better for marks he new tool. It IS easy to read/adjust etc, which more could amours in the torsion English tones? For all some write concealed says that they have broken a leader out of the ray, or that is not cracking, is sure is only so that it has not used never the torsion English tone before. It IS easy, but there are the right and wrong subjects to use these things: first; I tense your ray under the tight toe or until a cape is flush with his surface to joint. Segundo; attraction very dulcemente in the direction to tense with your hand in a zone of grip of the hand only. Third; any ratchet behind for subsequent turns, attraction a foot/of ravens of the socket etc out of a ray and then re chair. This drastically will prolong a life of these things, and maintain accurate calibration for much more of periods of time. Cambra; Be for a pause. While it is by train to turn you he lentil and company, will not lose it .
Orders well.
1 / 5 Gita
A intermittently the click did. It have used he without subject for a lot of nuts/of rays. Pause to do in 35ft-lbs but would do well in 33. Desprs resetting The in 35 would begin to do again. I can not trust this tool.
5 / 5 Jackeline
It IS initial description in arrival. It comes with the decent packaging and a case are quite robust for a tool is prize . Has multiple Tekton the tools and does not fail me never and create this torsion any one or.
A wrench looks very impressive and some marks are easy to read. Has roughly adhesives so to store and concealed to use for some any familiar person with tools.
Has tried in some rays of cape of the engine to try a torsion to see if some the bad descriptions are real and has not had a subject of a click at all. I have tried 20ftlb first and clicked immediately then juice dup 25 very still and when domestic in 30, he very click easily. I am happy with to a test likes him clicked quite strong and a torsion is precise. A work of entity will continue the Monday in some Favours while it is reliable and any subject for me to do a work. Some tools do well while a person knows that it is doing and use his brain to think and represent was. Otherwise, will have swim well while the spoon powered all a time.
Would not pay ridiculous quantity for a tool that mark a work included at all.
1 / 5 Macy
Experience this November of wrench 2014 has done until today it Can 2016.
First time has tried to use some parameters some low plus (12 pounds) he very click. Also, it opens he no down 20 pounds. In the parameters the more under a cape is loose and some looks of the loose cradle when posed in some parameters some low plus.

Opens can not trust.
5 / 5 Nga
Undressed Two coverage of rays of valve in mine BMW which cost the plot of money in doing to repair and new rays. He a lot of down put click of torsion. A lot disappointed when I purchase have all the classes of the accuracy sees another is unhappy with him too so that not to blame me anymore! UPDATE
after writing this description has tried to return a unit after a period of turn there is expired. After contacting a company has explained that you HAVE TO THAT store a torsion the wrench in him is dipping lower, any down which is possible that has done. I thought it always it have to that be place under any settings for the maintain free but has said any lower torsion drop the setting or he can lose is calibration . We send me to us the new one which have received so only. I do not use him daily but you update on he down the torsion that dips later.
5 / 5 Teresia
Has purchased one 3/8.ºn Strolls Tekton wrench of torsion. Right out of a box has tried to regulate a torsion to 20lb/ft. Of 0. A wrench felt partorisca like it has had something entrance this has prevented partorisca turn, as it closes up in around one 10 setting. Touched likes the fragments of metal have left inner of machining, or possibly so only a cradle that does a sound. Turned behind to 0 and regulated it again and begin to close up with a same metallic sound, but steps a 20 setting, has maintained partorisca presionar and loosing an adjustment and added some spray lube. A wrench has begun partorisca do well and rule of 0 to a maximum 80lb/ft. To the easiest plot now. A second thing that there are them remarked was that a setting of stairs of the centre there is not matched up with a boss of adjustment in a zero. When I have dipped a torsion to the setting of 20, 30 40 or 50 etc. A centre will not vary to a zero in a boss. A zero this 2 mark was. It likes 52 equals 50? If ossia aforado then 50 would owe that line up with zero in a a setting in 20lb/ft and a wrench has the strong click to that likes me. In a future probably will spend of the extra money and buy the most recognizable mark tool of name.
5 / 5 Cathi
Has bought this partorisca do some sparking plugs in my truck. The law a lot am guessing in a torsion of low plus estimate which think was around 15 ft- lbs. Fastforward, am substituting to hanger in a suspension and he have asked something around one 40 ft-lbs and a wrench never clicked indicating has achieved a value of torsion. The short long history, has twisted dulcemente a boss immediately a ray and am doing the travesía to a tent buys the torsion English tone that reads and the new ray. It does not buy this economic craps, has learnt my lesson.
4 / 5 Venice
1/1/18 - No impressed. A 0 mark in a no diverse boss with some indicators of the book in some stairs has located in an iron of a tool. So you are trying dial in the 50lbs the calm mark in fact has to that the twist to 52lbs in order partorisca an indicator partorisca be varied. Like the result, try vary a zero with some stairs is unsure if yours in 50lbs or the indication of torsion smaller. Any exactly ideal data an use/of purpose of a tool.

A tool was like this out of the boxes that the ironic meeting date a sticker in a tool that reads 'Tekton Aforado and has Tried.' Really? Any really tries this first tool of the send was? This is not that I have expected of Tekton, especially partorisca this type of instrument of precision.
5 / 5 Elvera
Has decided to try this Tekton wrench of torsion of the frames because they look partorisca have support of stellar client on all his products.

This wrench among the red of hard plastic chance, together with the manual that would HAVE TO read you. I think that that ossia something to plot of the people that gives critical negations probably skip.

Once comprise a way these works, and do sure to maintain he in a minimum indication when stored or doing other things with a wrench, would have to be well to go.

Looks very very built and has the good weight. I used it to change shock and cradles and has had to use several rows of torsion. A click was easy to comprise.

Will be to do more work some coming weeks, as I will update if anything changes.

In general, looks the tool adds, would recommend 5 out of 5!
4 / 5 Annalee
For a prize, does not take any better for frames he new tool. It is easy to read/regulate etc, which more could loves in the torsion English tone? For all some writes that says that they have broken a boss out of the ray, or that is not breaking, am sure is so only reason has has not used never the torsion English tone before. It is easy, but there is the right and wrong way to use these things: first; presionar your ray down the tight toe or until a boss is flush with his surface to joint. Segundo; appeal a lot dulcemente in the direction for presionar with your hand in a zone of grip of the hand so only. Tercero; any ratchet behind for subsequent turns, appeal a foot/of ravens of the socket etc out of a ray and then king chair. This drastically will prolong a life of these things, and maintain attentive calibration for much more of periods of time. Chamber; it feels for a pause. While you are by train of the slow turn and in firm, calm will not lose it .
Good regime.
5 / 5 Leda
Has required the torsion English tone to do work in our cars. Well, to be sincere, has required to do work in our cars, and has decided that soyquired' the torsion English tone. Excuses to buy the tools are always the good thing.

Was originally so only that goes to nip on to Sears and buy the Craftsman. This in spite of, have been horrified to discover the faith like small has in some of his products these days; Craftsman usual lifetime has guaranteeed of tool of the hand does not apply his to wrenches of torsion, and is substituted instead for the guarantee of 90 days. Three months? That on earth?? I guess it conceal it is that takings when you outsource the Chinese.

(Source as of May 2014: [...] )

Horrified, has turned to Amazon instead. It snaps-on it is too rich for my now same blood, but has considered choosing on the CDI wrench (and in a long career, has beaten still). Of then often it is likely to use it, it has imagined it it would begin in a low end of some stairs of prize so only to see that it was available. I have found this wrench, and although it is not done in some the EUA (manufactured in Taiwan) Tekton is the company of EUA that looks to be easily traceable in chance any questions/concerns pop up. One same can not be said of the plot of a fact-in-material of Cina. Also they look to maintain an eye was on Amazon for those with question, which is often the good signal.

Out of a box, a wrench among the reasonable quite red plastic case. It is not a plastic a heavy plus known the humanity, but is not a flimisest neither. It looks quite appropriate for a purpose, which is a lot enough. A wrench has the decent heft his, and does not give an impression to be cheaply has done. A ratcheting the mechanism in a boss looks quite smooth.

A thing that has taken my eye in this Tekton the wrench is that they have fill in some stairs in an iron in black. These sounds like the trivial thing, but that a bit changes does to read and that dips a wrench infinitely simpler that in other tools. They are the enormous defender of laser-etched sockets with big figures , clear in place of stamped markings (I has Stanley has dipped that has taken the paralizaciones economic ossia etched); they are that much easier to read.

In all the chance, has tried the pair of simple works with an informative wrench, comparing it against to CDI wrench apresamiento loaned of work. The the transmission of sparking plug and a transmission of oil, that comes from both wrenches in some same works. In general, a Tekton is the tool that feels solid. A mechanism of torsion of the adjustment does not feel almost like this smooth likes CDI, but in the neighbourhood of a cost, are more than ready to spend for big concealed. One dipping that after the mechanism is also far simpler that a a Craftsman has law ( has some class of eighth-turns to close with which does not remain never place)

A Tekton does not give the massively audible click when a conjoint torsion is achieved, but has found a motion in a point closely was quite obvious when has paste he.

Could not feel any discernible the difference has compared to a CDI wrench in of the terms of accuracy. I have tried presionar to some two limits have required for a work (13 and 28 ft-lb) initially with a wrench and then verifying it against another (and addiction-treat), and expósito that neither aimed a lot the difference. Still in a defiant plus 13 ft-lb setting (torsion of click the wrenches that is notoriously less attentive in an inferior end of his stairs) has found any real difference in the behaviour of any wrench.

Given a period of a boss, paste 80 lb-ft could be bit it optimistic. This has said, can not think of any work am likely to do in the near future that would require that a lot of oomph.

In general, am very happy. These looks to be the better tool that had expected in this prize, and given a cost is probably the better tool that a merit of prize. It looks to be quite attentive (with an usual caveats this applies to all any-wrenches of torsion of the beam in an inferior end of his row) when compared with the wrench much more type, and although I have not required he for a pair of works has like this remote fact, an ease to change among regulating and left-handed presionando resembles prime compared with some wrenches in this row of prize that only tin a lot that.

My only niggle is with a smoothness of a boss when turned to dip a torsion wished. To want to of the better term, is the little in a graunchy side. But for that, this easily would be the product of 5 stars. Included then, given the one who economic this tool is, never is like this afterwards to take mark full, but I like my tools to have the abonos tactile feels to them, and this an appearance means can very quite the give the upper bookmark. Work a lot enough, but so only feels the pocola was.

Called the 4.5 to amazon would leave me...
5 / 5 Calandra
Has ordered this torsion English tone to maintain motorcycles of mine and vehicles. I have used mine Craftsman Digi-Click 3/8.ºn Strolls torsion English tone to compare. Both appearance to be exactly one same to the each one like this another. I have clashed a Tekton on 1/2lb and presiona a lug given never like this slightly. I have used a Craftsman likes base of my measures, varying of 15ftlbs; 30ftlbs; 40ftlbs; 50ftlbs; 60ftlbs; and 75ftlbs. A Tekton mirrored a Craftsman digital torsion English tone during a row of test.

A build of a Tekton looks to be solid; I have not had any subject with some rays of boss that comes free, although I blue loctite his to be in a sure side. I do not have any complaint!
4 / 5 Maggie
A quality for some looks of prize to be fact very good. Clicks very positive, stays of sleeve in situating when concluded in. Without having crew of elegant expensive calibration his hard that says that attentive ossia but have the stickers that says it has been aforado etc. A down to to side did not like was of a quantity to launch among a gearing/click. It has been it bit it a lot you are doing in tight has limited describes to take it to 'grab' a train of next ratchet, looked to go down wrenches of finals. If it conceal it is not the subject big thinks that that this wrench will be adds for the majority of applications of use, but for has limited the zones say to do in the cars etc. can not be like this add he precise that little has bitten to travel for the take to click to a revolution while presionando.
4 / 5 Berniece
Tekton 3/8 t-the wrench is the good tool and a would not have to it expect phenomenally the tool finalised in this point of prize. It is the arrival of decent brushed type , a ratchet smoothly and is not feeling too free and is the type of low teeth so it does not expect the ratchet of 72 teeth. I have tried a first calibration to use he to measure distance of socket to the midpoint in a boss and it dipping the dipping the low plus and then try to the mid-vary on-line for procedure. Used tip he in sacrificial socket and semi-detached t-English tone his and there is pulled a boss in a marked location with the weight of luggage any joke. A t-nail English click on the dot of the pause and the stairs has the bookmark to limit to aim what hanged has had the habit of appeals he. There is the on-line formula to convert a distance in bosses to use this number with a weight has used partorisca pull the crowbar and calm coming up with ft-lbs that it was inside a tolerance declared for Tekton in both a 20 ft-lb and 50 ft-lb. You would owe that do this first test of the use to torsion anything. As another there is remarked to dip a wrench takes hanged in a lock and calm requires to maintain loosening a @@@knob to leave the movement has continued on some stairs. A t-the wrench has taken stuck in the setting with which torquing the ray and loosening a lock has had to go main or lower before free and go smoothly again on/down some stairs. Otherwise His decent tool but I do not experience this sticky lock quirk in mine 1/'2' 'old' craftsman or Icon T-English tone. This in spite of closings/of the click was once a setting is achieved and the one who his supposition to do. Has has had no other subjects but wishes it has had more teeth in a cause of ratchet sometimes the corner of transmission is limited in of the tightest situations. For these signals of prize touch the decent tool and can not complain roughly value and his quality.
5 / 5 Micki
When being able to apply a torsion corrected when doing in the car is critical. I have used partorisca have the Craftsman wrench of torsion that was some absolute rubbishes. Pause after a second use. I have bought this a pleasure the substitution and was the bit iffy roughly that buys the mark that has not been familiarised with, and without trying an out in a tent (b/c buying he of Amazon).

A torsion the wrench comes with the sturdy hard plastic case, which is a lot of (and protects a tool). Dipping a torsion is simple, and easy to read in a tool. I have been using he partorisca enough the while now and am very happy with him. It agrees to store a tool 'a-torqued' in a hard chance. Hopefully Last the long time.
5 / 5 Wallace
Is initial description in arrival. It comes with the decent packaging and a chance is quite sturdy for a tool in him is prize. Has multiple Tekton the tools and his do not fail me never and create this torsion a lot neither.
A wrench looks very impressive and a markings is easy to read. Has some stickers as to store and as to use for some any person familiarised with tools.
Has tried in some rays of boss of the engine to try a torsion to see if some the bad descriptions are real and has not had a subject of a click at all. I have tried 20ftlb first and he clicked immediately then juice dup 25 good closing and when shouted to 30, he a lot of click easily. They are happy with a test has done likes clicked enough of strong and a torsion is precise. A work of entity will continue the Monday in any Thank you how is of confidence and any subject for me to do a work. Some do any well while a person knows that it is doing and use his brain to think and the figure was. Otherwise, have at all well while the spoon has fed all a time.
Would not pay ridiculous quantity for a tool that does a same work at all.
5 / 5 Dorothy
Has purchased this unit after the good experience with his 1/2” model. Used the to torsion the fashionable oil of filter of cartridge newer. He never clicked, in torqued, and has finalised to break a house of cartridge ($ 900 in of the parts to repair).

Torsion The wrench was to store always like this required and never misused.

Has achieved was the Tekton () to ask the repayment and has not answered. The Any guarantee likes them announces.

More probably buy the unit of Load of the Port for 1/4 of a prize with a real lifetime guarantee and stay out of Tekton produced for first to move well.
5 / 5 Lea
Remarks an empty in a picture. It is 10ft. Lbs Or 15ft. Lbs? The one who knows...

Difficult to regulate and some lines do not line on well. When Regulating a torsion has to turn it I quite hard not softening at all, ossia with a lock all a way loosened will add. Then when lining on one 0 there is the empty that the hard fact to say that it is dipped in fact to.

Also would like me add that I love the majority of tektons tools. For a prize and quality easily the beaten was cariche of port. Mina another tekton torsion the wrenches do well, a so only another tool has had concerns of quality with this tektons impact torx bit, snaps really easily.

Touches to lose to a fact that can not trust this torsion English tone on anything critical, always has to that I control double he with my snap-on, in that if pode also just use that torsion English tone instead.
5 / 5 Letisha
Has taken this to substitute an old craftsman digitork this has failed. In general I am very happy with him, and has grown quickly to in fact prefer this fashion in a digitork. My only flu is that this action to dip could be the little smoother. Not To Take me bad, does not take the gorilla for the turn, is so only feels the little crusty in of the places. The arrival and the external accesses am very good. They are sure over time it seats more compatible likes wear of threaded surfaces in has bitten it.
5 / 5 Donovan
A click intermittently has done. It have used he without @@subject for a lot of dice/of rays. It takes To do in 35ft-lbs but would do well in 33. With which resetting the to 35 would begin to do again. I can not trust this tool.
4 / 5 Donn
Has required to install the brake caliper with 40 feet/lb by force. This never resupplied torsion an audible click, in that cause me to on-presionar a ray and undress some edges in a caliper. Like this now they are out of $ 200 of then I owe that substitute a caliper. It gives the graces for at all, Tekton.
5 / 5 Wiley
Has purchased this November of wrench 2014 has done until today May 2016.
First time have looked for to use some settings some low plus (12 pounds) he a lot of click. Also, Now he no down 20 pounds. In of the lowest settings a boss is free and a look of the free cradle when dipped in some settings some low plus.

Now can do not trusting.
4 / 5 Israel
This will be my second Tekton Torsion the wrench has purchased. A prime minister one was for the main settings. I have required the second a with lower ft-lb of torsion. I chose it reason, a prime minister a workes adds, better that one uploads of port one the experience.
A clicking feels strong, like six able to say is there. It declares that it comes pre torqued of a factory, this a , but my in the first place a no. The accuracy was so only has gone by . Which is not that bad knows roughly that. Highly it recommends to pre-aforar yours torsion English tone before it uses and the tent down is dipping lower , for long life. It is easy to read, use and maintain.
5 / 5 Sue
Has has had so only this torsion English tone for 3 month. I do in the small tent and give this almost daily use. Not to use it never for presionar more than 70 Nm. Any have to Him legustado a fact that could you a lot precisely know a mark of torsion reason a dial was so only very attentive. But he a work never undressed anything. But then the few days , has presionado the ray to only 55 Nm and my torsion the wrench has blocked internally. Of then there is not any guarantee on is forced so only to buy another. I think it that it was well to say that I have followed the instructions of a costruttore for storage and maintained it also cleaned. As I do not am missing because of abusing
4 / 5 Jong
I have bought this torsion English tone specifically to correctly torsion a two casserole of propiciado by oil of drain in mine 2014 Corvette. One that exists torsion the wrenches has has had neither the main row or was a cradle partorisca write torsion older readout. Has thinks that that this would do a trick partorisca my application. Unfortunately, after dipping a wrench partorisca 18 ft-lbs, a wrench has failed to 'click' in 18 ft-lbs and thinks that there is ruined one of some two discharges of edges of drain. It can any never take a new torsion English tone to 'click' in anything approaches a value closely. Worthless Piece of crew.
4 / 5 Vernia
A lot wary of a wrench of economic torsion. But there is remarked to the plot of descriptions adds partorisca this mark. Before I used it on my truck has tried his accuracy and he was of only for books of feet. They are very happy with my election. More calms any Youtube the calm investigation will find that this mark of torsion the wrench is adjustable, meaning, can the to you aforar with knowledge very small.
4 / 5 Danica
Has purchased one of these in September of 2018. The year later, has begun partorisca have some smaller questions with a wrench. I achieved it it was to Tekton Cured of Client and interior 2 days the substitution seated in mine doorstep. Calm can not ask better support that concealed. Already I have the little Tekton the tools and I to good sure will be partorisca buy more. Thank you, Tekton!
5 / 5 Colton
Ossia A second Tekton torsion the wrench has possessed, and continue be satisfied with a mark. A tool is quite he directly-advances to use, likes virtually all torsion-wrenches, and a markings is easy to read even when smudged with fat or other car fluids.
A tool is sturdy and among the plastic chance very built. I have not had any one @subjects to apply some quite good force to this tool without concerning roughly break to a tool (a banjo the ray has not been like this lucky last time).

Liked me this tool has bought enough a next measure of him also.
4 / 5 Dominique
Has done like the charm! I have bought it is a reason have required the dependable but abordable wrench of torsion for work in motorcycle of mine. He Excelled in his work! A click was a lot of audible and easy to feel.

A wrench is done out of sturdy metal and is easy to operate.

Has READ The INSTRUCTIONS And VERIFY UNITS! Some instructions resupply guidance roughly using metres of newton as well as it gives the directions add on use and as to dial in a setting corrected.

To maintain accuracy a wrench has to that be business IN 10 FT-LB.
4 / 5 Nina
After reading stirs it of different descriptions, so here amazon and other places, has decided to entirely renew my torsion English tone lineup with new 1/4', 3/8', 1/2' and 3/4' wrenches. Everything of them Tekton. Everything of them the work adds.. It excepts one 3/8'.
Out of a box a ratcheting the mechanism has not done properly. With which resetting the backside and the advance could take it to ratchet some but then he swivel 45-90 first terracings to take. Now he no at all. (FYI Has the habit of torsion something a time 32lbs.) Unfortunately I have not opened or use this element until it was after my period of Amazon there is expired.
4 / 5 Harriet
Has has used elements of better quality in a past, but for a prize this are adds. Although it can any one any class of tests of calibration, seats solid and when I used it, a weight applied when torquing was expected like this that.

Goes to add that with recent contact for a costruttore, am given the sense of tranquility and confidence more orders in a wrench. They are very pleased that a costruttore has achieved was and he known is available if any questions were to tug up. This tip the positive, proactive approximation of service of the client and I really can appreciate concealed.
5 / 5 Tory
HAS the quality of build adds so only like a big plus 1/2' wrench of torsion. But I have found that when I have been to use he for a first time, an action in a boss has not been almost like this smooth as in mine big plus one of TEKTON. Almost it feels like this it have any assembly lube used is. This was the prime minister for me because all have bought of TEKTON has been the upper notch without @@subject. This was a first time has not been very happy.
Averts of a rigid adjustment... It is to have to that like this weighed likes the main version and the law adds (calm once the the put). They are still happy with a compraventa reason is the tool adds ... So only it wishes an action was perfect out of a box. Probably I will require to add my own fat/lube his.
5 / 5 Jacquelin
Ossia The tool adds , compared to the a lot of expensive Snap-on or Husky, some calibrations resist some less than 2 accuracy. It seats solid and very built in my hands. The ones of way that the utilisations far on quite all have done on Marin Outboard engines, the suspension and work of engine, interview, lug dice, ect. Still it comes with the hard plastic spending the chance where can add you adapters.

Two things could improve on: it wishes an interior to coach has had more teeth he so that it can be better in something tight where calm no active a lot of clearance to do, and an etching of laser of a torsion thats the be has applied, has not been times it those would last.

Also would recommend to open a tool and adding fat to an interior so only for durability added.
4 / 5 Maxine
Experience this to finalise to install the trailer hitch. I have had previously one has purchased of Load & of Port, but has had questions roughly is quality . If you are looking six probably know a an I am speaking roughly.

This engine is in fact surprisingly very built for a prize and treaty a lot well. I have used this and another side of engine for side and while a H&F the engine has done, a click was insignificant to a point of any when being any noticeable for any sound or feel.

This engine a click was quite strong to be easily listened and felt it immediately. Solid product that I am happy has purchased, and the desire has purchased first.

I probably will not use it again for the moment, but wont thinks two times roughly the when I do.
4 / 5 Ezra
Ossia A second TEKTON torsion the wrench has purchased a past year, and both of them looked partorisca be English tones of good quality at the beginning impression, but both have failed on me, not indicating a 'the torsion achieved' with the click when presionando vital components in automotive applications (p. p.ej., sparking plug, Spent of drain of the oil), those results in undressed edges further of a chance, forcing me partorisca spend time and money partorisca repair harm on two separate occasions (p. p.ej. helicoils). Some torsions be it has used was well inside a capacity specified of some wrenches. Two strikes and I am was.
5 / 5 Yuk
Has used this partorisca install sparking plugs and running neighbouring. To good sure has question with a consistency of the torsion applied in This in spite of, is really +/- and so that a lot of purpose there will be use he partorisca that does not import any a lot of.

Has compared torsion using two separate torsion wrenches, one of MAC and another of SK. I have taken loaned these of Uncles partorisca give you an on variance in torsion partorisca a Tekton.

Is the fantastic torsion the wrench and I highly would recommend it to any the one who his own car interview or plans to. Partorisca maquinales, the chair would cost of the extra cash and so only buying the best MAC or SK wrench.
5 / 5 Aileen
So only received today, verified it on the pocolos fulminas and that specifications of torsion of the need.

Loosened Rays in several elements around cocheras and king-torqued his with a torsion English tone.
Looks quite attentive.

Gram mower leaves, torqued like me required and not launching out of a leaf. This past before LoL. In a summer has substituted a leaf but he am fallen off. It has not had the torsion English tone so that dipped in old leaf and any question. Brota Of the substitution was OEM run this in spite of with the micrometer was roughly three millimetri fat like this probably a subject. It has dipped a leaf of substitution on and torqued to spec like this declared with this wrench. A die for a leaf a lot of loosen and fall off. The question has solved, this in spite of maintain an ear is gone in the chance begins to loosen.
4 / 5 Brigid
This torsion the wrench arrived with his boss, which selects a place of torsion of a wrench, stains up with a markings that does a wrench unusable. I have tried ours he anyways but undress a die has tried torsion. I have called a number in a law of paper concealed is coming with a wrench that says DOES not RETURN the PRODUCT there is A QUESTION PLEASES EUA of CALL! Well I have called a number and the person have not answered never. I have left two messages without calling behind. As I guess I am stuck with the tool that at all now.
4 / 5 Tobi
These works for one the majority of part BUT constantly he A lot of CLICK. Face in the suzuki engine of motorcycle and felizmente was so only a bomb of external water and a lot something intern more serious and a wrench any one the click and I have maintained to turn a wrench. A ray snapped and has scared some edges there is ruined but a ray has broken and was felizmente able to take it. You think occasional projects ossia WELL, but beware of him a lot of clicking perfect and taking stuck and not communicating a tension is achieved. Also, the maintain properly for loosening a dial of adjustment and take a tension of an inner cradle when any into use. Ossia Well for hobbyists for the low prize but no for more serious has has imported people/of projects.
4 / 5 Britteny
A clicking the sound done an a lot of easier wrench to use that a Craftsman wrench of torsion with the floating needle (to the equal that owes look in this part to know when a right torsion has been achieved) that has bought and has not used never. Perhaps my hands are not quite strong, but a lot really see that presiona a wrench all a way until one 80 ft-lb capacity, which theoretically would be useful on turns lug dice (factory spec is 76 ft-lb). I think that that I am so only able of presionar a wrench to roughly 50 ft-lb, which is still sufficient for vast majority of potential applications for me.
5 / 5 Tesha
Looks well. The better way that a one with shabby black product, the white numbers have spent, scuffed auricular of socket, the streaky boss has received in mine first order. In fact I have any way to know the one who attentive ossia ( could compare among an used and new an in fact), the desire was the pause -was but those were too many expensive. I have received at least an interior of substitution 24 hours so that good I supposition. Hope My dad any the import has left this description in his account.
5 / 5 Carmelita
Ossia A torsion of prime minister-the wrench has possessed & used, likes to please take my commentaries with the little inexperienced leeway.
Like me one feels and solidness. Immediately it feels he likes quality, without being so only the heavy weight.
Are not an expert, as I trust that it is attentive. He , repeatable measures.
One dipping knurled lock of die in a base of a boss among a way when calm physically is using, and neither is compatible when quell'using to close/unlock an adjustment. It can sometimes unlock when yours palmera is gripping a boss. Perhaps it have to that presione more, but enough was sweet with this precision . A die feels coarse is operation , would have thought it would owe that be smoother and more fluent.
5 / 5 Rolanda
Some first time have broken the ray, thought it can finalises to be the feeble ray. But some second time have broken one in a mountain of engine, I new a wrench was faulty. I took hours of additional work to drill out of a ray broken reason this wrench would not register a torsion at all.
4 / 5 Enoch
Has taken it casualidad in a 3/8' Tekton Torsion the wrench has based in descriptions of client and like this far seats does to plot to estimate here for a money. I gave it 5 stars in all the categories although they are not still able state to have the control of the calibration done to try an accuracy. I have verified several rays that has had previously torqued with the aforado wrench of torsion and a breakover the looks to signal to be reasonably near. An arrival is a lot well, in fact better that had expected in this point of prize, very easy to dip value of torsion and a markings is readable. Some clicks are also very solid and easy to feel when a preset torsion the value is achieved. There is no plastic parts in this torsion English tones and for this thinks that that it goes to try to be very durable in a longitude haul. My only complaint and is the subject smaller, is that to achieve an upper torsion the values requires to plot to twist endeavour in a boss. Of only I am planning to use this wrench in a row of 10ft-lb to roughly 40 ft-lb is so only the smallest degradation. In general, like this far I am very pleased with cost of mine and plan to stick another description afterwards has an accuracy has tried.
5 / 5 Karleen
AMENDED: I have had to that amend my original description of 1 stars. This torsion the wrench has not done in the pair of the installed rays in some bladders of Impulse of the Air for my truck. For some reason a 'click' never spent in these rays and I think it could be due to some rays that is threaded to the brass inserts/inserts in some airbags (can not say sure). This has said, all other connections in this product, a wrench looked to do according to some instructions. I gave it so only 4 stars been due to a subject with some rays of stock exchange of the air. Those have been suppositions to be installed to 20 pounds of the feet and I could not verify that it conceal spent with this wrench.
5 / 5 Sterling
Paralizaciones To do after the few months of use.

A torsion the wrench is resulted entirely unusable - fell it practically averts halfway by means of the work and I has had to that exit and purchase the new one of the tent of local hardware.

Has bought the fashion of wrench of torsion of the click because ossia that it was more comfortable with and was value a lot well for a prize but I would not recommend this wrench for anything but light work in your cochera or changing wheels.
5 / 5 Bernie
Has purchased this torsion English tone for automotive use. First what there is remarked was that it was the bit is gone in a 10lbs. Setting. Rings to add 10lbs. To some thermostat housing the rays and he have begun to feel too close up to break them first to listen a click, as has short prisoner. It add in 13mm rays for 40lbs. As you shout he of 10lbs to 40lbs. In 5lbs. increments The lube he partorisca first use of time.

For a prize is not bad, but still would have verified he for calibration and does not use for 10lbs (any included require for 10lbs, so only presionar the bit with common sense).
5 / 5 Syreeta
Was quite happy with this compraventa. You look in the few wrenches of torsion and decided is one. They are not the professional mechanic for any half, but do more all my own work in mine out of motorcycles of street. I have completed recently an engine reconstructs and has required an easy to use torsion English tone. My old craftsman equivalent torsion the wrench has not had some low measures have required. Some wrenches of type of the click in some venues Sears was $ . This Tekton for low $ 40 was the shot and has done so only well. It likes to buy of the American has done the tools have Michigan like this contacted Industrial Tools to ask where has been done. Unfortunately, a torsion the wrench is done in Taiwan. There is another concealed looks a Tekton, has called Sunex. A type of support I emailed has declared that a Sunex can look alike, but Tekton torsion the wrench is manufactured exclusively for a Tekton frames. Any sure if really I think that, but a wrench extracted well. I suppose to be it pro maquinal, would do the different a Snap-on, but for a quantity of work I , these looks to do well.
4 / 5 Frederica
I amour tekton produced. Has tonnes of his sockets, wrenches, ratcheting wrenches, etc. But this torsion the wrench is for the fail. He a lot the click until the way is spent a concrete setting. I undressed I pocolos fulminas first there is @@give. If there is a tool to do QA on - is the torsion English tone.
5 / 5 Soon
Used it tonight to torsion some 4 rays for side for one rear bearings in my mothers FWD minivan, utmost facts for that. Matched up with my expensive 1/2' unit. Both read 41ft-lbs to the equal that has expected.

Has purchased this with an only purpose to redo a @@@lash of valve in mine 5.9 cummins (has to that torsion some dice to close to 18ft-lbs that mine 1/2' tin a lot remotely ), feels quite comfortable now using he for that.
4 / 5 Sharice
I torsion of use wrenches daily. The question is that with which 1 month of use, a wrench has fallen averts and left it lateralmente. It is not guaranteeed roughly, his roughly time. If they are in a half of the work does not have time for calls and while to the new wrench. A fund unscrews and the falls was. Some starts of wrench of calibration. You are better has taken he Husky English tone of Imposición of House. A quality is very better. More than likely is near you and easier that contact and treat. The sad thing is that these frames of the tool does not consider is that you do tools of the calm good quality so only could maintain buy of this mark. The poor quality tends to do the consumer averts that it marks. I never for the Tekton has produced again.
4 / 5 Kayleen
This has done adds Initially and has believed to be the good value . I use he mainly for vehicle lug dice in 75 . After the year occasionally slips when presionando. This has worsened progressively. I took it finally it averts and found some teeth were sheared was one for one. This wrench is probably well for the applications by force smaller. It does not count in the to do near of the upper limits this in spite of. Also, has tent always he in a minimum setting like recommended.
5 / 5 Nadene
Has used so only this partorisca to dip ready up in motorcycle of mine. Of 11.5 to 29 ft/lb of torsion, a tool was easy to use with an affirmative click when you achieve your tension has designated. Sparking plugs, Ray of drain of casserole of oil, and callipers to brake all tight celery and ensure with which to 40 pause of one thousand-in walk. To good sure better that those flies for a chair of your trousers. I actuate absolutely overtorqued my filter of oil and discharges of drain without him.
5 / 5 Ricardo
I torsion of use wrenches, now that has bought the little, regularly. It resupplies peace of imports to know that a fasteners is to spec. They are to good sure satisfied with a quality of this wrench. Utilisation for a mid-sized fasteners in my vehicles. My only flu would be like a torsion the setting is closed down in an end of a wrench. A knurled to the lock does not remain tight 100 of a time and sometimes finds my torsion the value has changed of the book or two. No the value that takes the star of an indication in that. So only I the the point to something the controls from time to time.

Top Customer Reviews: EPAuto 3/8-Inch ...

Rating: 4 out of 5 with 60 ratings
1 / 5 Donita
Well it trust it on this for the BMW motorcycle... They require concrete torsions for the best all some rays. Also it has ' run over washers' done of of metal that has only run over enough.... As it buy it this... It poses it ... Changed an oil... clicked ... Val... Well. Reset He, has changed a tranny fluent... May clicked. Instead nude out of some nuts of aluminium. You are thinking 'it does not know that 22 nanometers or anything listens likes him... He a bit another work and now nervous quite reliability. Some clicks to time the another No. to time The longest history down is the desire had not followed BMW the instructions and I desire had not bought this. The cause now has to imagine was so permanently fix the hole in a side of my type of motorcycle. It do not trust it .
1 / 5 Beatriz
Bought this to apply pertinent torsion when those substitutes some cover in my Cadet of Cub mower. They pose in 28 ft. lbs. And you go to tense some cover. Any click. I have to prender has to it way that be subjects too tight. It IS to Deposit of House and more past, but law properly. I have compared included a two in the lug nuts and this cheap torsion the wrench has taken much more try take a click in a same parameter like Husky wrench.

While it costs on two times as much as this piece of junk, a Husky Torsion the wrench is come with the lifetime (any one receipt) guaranteeed of substitution. I guess it it was to spend this tool in my threads some day.
4 / 5 Pandora
Quan Ordering this torsion of wrench of particular model, has not been sure was the good idea that considers a lot of descriptions have said that it was difficult to adjust a dial of numbers of the rotation, but has not been that bad, a force to adjust a dial was in a same as on 'Pittsburgh Pro' wrench of torsion that has been purchased earlier, 'Pittsburgh Pro' the wrench has to be substituted so that tomb of the 5ft be and prendido to do, this torsion the wrenches is very delicate, necessity of careful when being very to fall them. A precision in a EPauto 3/8 wrench is quite well, a click is well and strong, a voice of only subject with this torsion the wrench is that some numbers in a cape (10 in 80 mark of pounds of feet) is the small bit (much smaller then an ones on 'Load of Port/Pittsburgh Pro' English tone) as they can be hard to read.
3 / 5 Lakeisha
He only torsions very rid fasteners. If you have to torgue the left wing has rid threaded fasteners, this an is not an election. (Any one in the date of mine of advertising has purchased, 'right hand only or amounting') Segundo, has tried several times to take the certificate of calibration of EPAuto. A statement is, +/- 4% precision or anything his recovery is. 4% compared in concealed it ? A nationally known level, or (Joe is) 'listen likes him 26 ft lb of torsion in me'. For torquing each fasteners in proximity of the each another, is probably COSTS. To be the quality accurate tool, look further. Certificate of calibration those declares a accreditor of the precision is that very want to and needs. In in to to Something likes him to him his ISO 17025 or of equivalent. This any tool come with the certificate of any class, or has been able to take one of them. Precision of 4% can mean a lot of things. It depends on you are torquing critic fasteners or no.
1 / 5 Ladonna
This is not an accurate tool. Calm very think that that you go to take a wrench of accurate torsion for $ 24? I have taken it casualidad because of some good descriptions and a low prize. But this thing seriously in torsions. The majority of a time he very click at all, any one those that forces of subject posed in the. An example that took has not been the tool of quality. Highly it recommends that this purchases an expensive, done in tool of EUA with the certificate of calibration. If your application is quite that imports that necessity the torsion English tone to take an exact value, then is enough of entity to buy the tool of quality.
5 / 5 Miranda
Impressed so far. You are one of some less expensive options and do so announced so far. When being solid and well has built. Read some instructions, has 2 notes of entity. 1 Loosen Inferior nuts to adjust torsion. 2 it Poses to pose lower before tent to maintain calibration.

Enough buys well.
4 / 5 Terrence
Fact well. A bit in a low end but for a prize the roads adds. Precise practice on some uncritical rays to take used to to listen a 'click' or use the parameter of low torsion that dial up. No for ratcheting after it achieve a torsion. Do until I can justify the fact in Japan, EUA or torsion of wrench of Germany. Sure when being to store to pose lower. Be sure in parameter of next torsion in. It requires some taking used to. Probably I will buy a 1/4 inch version. The quality could be bit it better, jimo. Well to tense cover, ray of casserole of the oil etc.
5 / 5 Saran
Utmost wrench. Used the while it substitutes my tampons of brake. Easy to use, only read some instructions before use, and mark sure to decompress a tension in a wrench in 0 when is by train of the tent / any one in the use. Fact also, has bought one 1/2' walk also
3 / 5 Jennifer
Adjuster IS very rough, included although a locknut is loosened all a road. Apresamiento Very hard to adjust it especially in a field of upper adjustment, has to pose the deep very socket in just to create quite leverase to twist a adjuster. Has a 1/4 version of the same exact wrench and is very smooth likes him is supposed to be. I am not sure only it take the lemon, but a calibration is accurate.
5 / 5 Nannette
Has the small subject, and need the torsion English tone for some concrete applications. Look in the number of wrenches of torsion and has compared prizes. A quality and estgirado an application of work' together with a better prize was perfect for my necessities. I used it the long took it since and has done like the field.
4 / 5 Carri
I am writing this description because I have read some of some other descriptions and dictate to the equal that has has twisted rays because a torsion the wrench has not been aforado well. First of all it does not use the torsion English tone unless I know that it is aforado especially I of uses he on aerial, motorcycles and engines. I have been the authorised A&P (maquinal of aerial) partorisca on 20 years so that it is like this partorisca use the torsion English tone properly. To all the cost, these looks partorisca be the a lot of-does torsion the wrench and are by train of the look forward to that hard a lot of years partorisca come.

Like some pictures that there is rid are that that come from a calibration in a torsion English tone. If you do not comprise some pictures can Youtube, 'calibration partorisca try in the torsion English tone'. You can see that some weights that has dipped on is 30.4 lb and has regulated a torsion English tone to 30.5 lb. Some weights have done grieves clicks in the half that is aforado perfectly. I do not have any question that uses it. He ratchets well, feels good and is aforado like this unless I am doing something wrong while using it, will not have any subjects that fulmine of twist. An only one with that it could find is when you is by train of the place to the torsion of big plus has to that maintain loosening a lock and is class of rigid twisting a boss partorisca take to a torsion of big plus. Another that that, to good sure suggests partorisca buy one of these of then is economic and there is aforado...
5 / 5 Leisa
Has has used so only this product two times. One 1st time snapped of some rays in my coverage of the valve and all the world said me would have to that have is gone down to books of thumb because it was the pound of the low foot that the estimates is like this displaced was as it conceal. 2nd time was king torquing my rays of Casserole of the oil to 18' books And snapped the ray is gone in my blockade. Turned the down to 15 pounds and he looked to do until I have burst another ray. Stored a way is supposition to be business and read all the instructions. This goes to be a insanely expensive fijamente.
4 / 5 Mechelle
Utmost wrench. Used the while it substitutes my tampons of brake. Easy to use, so only read some instructions before use, and sure mark to decompress a tension in a wrench to 0 when you are by train of the tent / any when using . Fact like this well, has bought one 1/2' walk also
5 / 5 Candi
Junk. Worse that he 10 port of dollars uploads. Torqued 28 ft lbs, Any click. I have had to that go down a torsion. He clicas. It has then augmented a torsion has retreated to 28 ft lbs, without turning much more there, he clique. Torsion like this real in a ray could be much bigger, the one who knows? I have used this to torsion an injector with running over it washer. I can not take and torsion again without the new runs over washer.
One uploads of port one had developed same question after the few years of use.
This tip a new question. Like this disappointed in this product. Load of port there is lifetime has guaranteeed. I have behind taken for the new a, but has not trusted that one. Now, I have paid thus piece of junk. Material Im the way is past period is returned.
4 / 5 Adrianna
He a work, but, the difference of another torsion of big plus the English tones have purchased, has been disappointed that this one there is not coming with the certificate of calibration. I have purchased this for one the concrete task that uses a value of concrete torsion, as I have verified is accuracy in mine torsion required against the wrench of torsion taken loaned that is to be know to be attentive, and the looks have left up. That time remains attentive in this setting and the one who attentive is in other settings is any one is supposition.
5 / 5 Gearldine
After reading some a lot of descriptions, has bought this wrench to sparking plugs of torsion in the Toyota. With which arrives have read that torsion the wrenches are typically inaccurate in the lowest readings and I have required the torsion of 15 ft lbs for some sparking plugs. It was understandably sceptical that could achieve it 15 ft lbs with accuracy of one dipping a low plus in a wrench is 10 ft lbs and of then ossia an economic wrench . As I have researched as to verify is accuracy to look several video on Youtube. It is not that difficult with the bit of the mathematicians and the simple tools as they aim it, the cube to water some wise light, and some attentive stairs. My surprised, test in only the pound or like this down. Ossia Quite near but is also easy to regulate a wrench that instructions of uses on Youtube.
4 / 5 Raelene
Has Had the 16 ft/lb exhausts ray of motorcycle.'torqued To 10 ft/lb and snap was. It has taken a torsion English tone to Snap-On and has said that some the inner settings were has gone by 12 ft/lbs.
4 / 5 Christena
Am puzzled for a big indication. Any one a vendor has the tonne of descriptions of the fake or the people are ratting this product has based on is qualified for presionar stop them light rays. I used it to substitute all four rotors and tampons of brake in the 2003 Deep Odyssey. Law long quite and with accuracy enough for presionar all a caliper highland rays and caliper bosses of ray of the pin. Pause while dipping some wheels behind on. Some dice of wheel require 80 pounds of feet, which is in a big row thus produced. A ratchet of the walk of the tool has broken entirely averts to several pieces in a second goes. If it plan to use this for anything more than pocolos fulmine light, then take something more. Clicking Torsion English Tones, included expensive some, pause easily and require routine calibration. It goes with the wrench of torsion of the beam is doing anything serious.
4 / 5 Laree
Did not use It still but has done sure easily could regulate he until 80 ft lbs and easily regulate. I have required this torsion the earliest wrench and there did not go it I so that it has bought he for a next project. Has the 1/2' stroll torsion the wrench but was to bulky to go in a zone has required. An impression of feet of this 3/8' the walk is much smaller and would be returned my needs perfectly. I any precise the 3/8' wrench of torsion a lot often but if I require it and does not have it , is the evening. I have not been conscious that more torsion the wrenches so only could be used for hand-held edge very that prizes so that it is good information for a future. I have used wrenches of torsion of the click for more than 40 years so that it is an importance of the a lot of torsion English tone and like the properly use the torsion English tone.
4 / 5 Stefania
Has bought this for installation of sparking plug. A torsion the pointed wrench is slightly different that other wrenches that has seen on-line. My question with east is that some empty among some weights are very small and is hard to take an attentive lb setting. Also, have @@give that although you have done sure to close an inferior ray, can burst was and release a place of torsion. I have found this to be annoying of then has had 2 times where has lost a setting while dipping force in a wrench.
5 / 5 Onita
Not doing after so only the little month. I used it the little time when I bought it in the first place the few months. We were in vacacional partorisca the month and is returned so only. It has been partorisca regulate some and torsion some rays in mine dirtbike and he no longer works. Any NM of feet lbs dipped it his clicks immediately so many is clearly not doing . A lot of disapointing after so only using it 2x and my esventana of tower' has closed.
4 / 5 Margret
Likes to give this torsion English tone 4 or 5 stars of looks partorisca be a lot of-drawn and feels very solid. This in spite of, at least in a one has taken, a setting is a lot far is gone in a low end. Dipping he for 10 foot-calm the books have given in fact 18 foot-calm the books have based in my calibration. This was still after breaking he in them so that it suggests. Felizmente Looks that can dip you a value of torsion under a minimum in a dial yes in fact precise applies to the to something likes 11 of feet-pounds.
4 / 5 Velvet
Has the subject small, and has required the torsion English tone for some concrete applications. You look in the number of wrenches of torsion and has has compared prizes. A quality and estágirado a labour application' together with a better prize was perfect for my needs. I used it long I took it of then and it has treated like the field.
5 / 5 Laurie
Has bought this to change sparking plugs for my car. Hand of shows of the boxes of sparking plug presiona in the first place then English tones of use and turn roughly three neighbourhoods. Like this when I use this torsion English tone, has expected his of click when I have turned three neighbourhoods. But no clicking sound. I have prendido in moment and has thought that if this product is deserted? This can break blockade of engine... The readjusted To low torsion and choose one of some rays in a car organism that dips two together metals. I have begun for presionar he with this torsion English tone with the adjustment of low torsion, and does not have any click!!!! And it break ray. They are like this happy that there is prendido to use this wrench for sparking plug of mine. I have seen now the people have had same questions of a description. Never buy this product.
5 / 5 Katie
Has begun so only using a product like this like this with all the time of tools will say, but my first impressions are far better that has thought. All feels tight, remarking rattles or shook unnecessarily. It is easy to regulate and a mechanism to close good works. A fact that there is Nm are adds for bicycles especially. That has appreciated really was a quality of a chance. Some accesses of wrench amiably in a chance and a chance is of the heavy plastic. It can break in the really hard drop but he will save a tool. Has the map of conversion in some instructions that have left in a chance for this reason, but there is also the estimativas of the conversion concealed is molded to an interior of a chance like this he has the calculator, ready telephone, or the pencil and the calm paper still could convert units. So that it is me cost can not be happier.
5 / 5 Lavette
The one who the torsion English tone that so only goes to . I have bought this reason was 3/8.. There is not it remarked was such the low row , supposes them ossia well for the people that aerial of build of small model.. But seriously, this is not for automotive work.

TAKES is a word.. It maintains a wrench, was quite economic - am them sure the'll uses it finally, but his not going to do for some applications had purchased them partorisca. GG, has squandered My time.

Torsion To the looks of wrench likes them the work, and looks of good construction - albeit having such the pathetic row
4 / 5 Meghan
thinks that can have taken the lemon. I know in that 25-30 ft lbs is to feel but has bought this one to be sure, , invernadero, presiona, on click!! Unfortunately it has it have to that the turn, the little bummed has gone by east. I have bought the 1/2 strolls the torsion concealed does not go like this down like this in another mark but they look very alike. Anyways That a work...
4 / 5 Bradly
Has based in other descriptions, this has looked is the quite good value for a wrench of Torsion of the money. I have required the plus along 3/8 Torsion wrench. I give this 4 stars for 2 reasons, 1 is not like this easy to read like the pictures was to be, some products of the etching does not underline against a resplandor of a boss well, and 2, a 'click' is not very pronounced in of the low settings, down 30flb or like this has to that really be prendiendo the attention to one feels when he bursts' in a place of torsion. Mina small plus 3/8' is very better in these settings this low plus. In general it is the good wrench for a prize.
5 / 5 Luz
Has possessed this for almost the year and launched it so only go. He month, fails to “the torsion ” broke it lug die. I gave it a profit of a doubt like an anomaly. It fail again breaking it stud that resists the pulley to a blockade of engine. That would have been to 2 work of the hour is now to 3 work of day to the equal that has to that be drilled was with which partially pulled an engine to take the hammer in there. Has a vehicle like the hire has to that be ., Etc., Etc.,.
4 / 5 Ivette
Has produced of fantastic quality for a money!!! Has 3? Time for year the find me in needs of the torsion English tone. For this reason that spends $ 130-$ 150 looked excessive. I have required the 3/8” walk, like this has verified them my tent of local labourer for has used. A clisest the thing has had was $ 89 and the light has been he was Amazon of control. This product has on burst and has ordered! It is coming 2 days later the Sunday directly during my project has required partorisca. Honradamente I 1/2 expected to use it and pause he for one $ .... No a chance. Quality A lot WELL in pair with $ 130 elements Ive visas
4 / 5 Roland
The construction adds, Weighed and has done well. A question is that a torsion is not attentive. Snapped The ray because I on torqued the. Tried the and is entirely was. I knew it it was too well partorisca price
4 / 5 Ingrid
has required the low cost but tool of confidence for torquing. This tool a good work. A torsion was compatible as compared to mine 3/4' wrench of torsion in some same rays. This wrench was something has required to be able to manage rays of torsion lower. Compatible torquing of ray to a prójimo is that I have looked for and this wrench there is rid. You recommend to any for general needs. I can not comment in a precision and accuracy, so only that compares well to another torsion the wrench has had and that it was compatible. A quality of build was solid and a chance among good era to have for storage.
4 / 5 Bernarda
For his purpose has feigned that read in my motorcycles, the law adds and at all there is backed was or fallen off. Always it uses the dab of big temp silicone in dice of torsion to use for visual inspections and any sign of backside was.

Feels solid, any @@subject or has surprised. It uses this in the middle of manufacture... Prob No, has the the feeling s the good house has to that go down wrench of torsion that is that the majority goes to use stops.

The product comes with the plastic of hard chance to store a wrench in, and is well has packed.
4 / 5 Janee
Was something in attentive when compared to another torsion of big dollar English tone that quell'was has aforado so only. It looks durable and I like a darkness etched estimates of torsion like him the easiest fact to see for these 56yr old eyes. Another some have used before it is chrome plated throughout and the numbers reflect and is not seen easily. A course of the ratchet of this wrench is account of low tooth and is not my favourite reason the account of big tooth will spoil you. Shopping again.
4 / 5 Delia
Can use mine 1/2 thumb wrench of torsion for just roughly anything of then has the together full of adapters, this in spite of the a lot of easier meeting to use this 3/8 thumb wrench of torsion when doing in of the smallest rays. It is easier that manage, and no among a way. It researches to be aforado one same like mine 1/2 thumb (different mark), as his accuracy is probably close enough for a do one. A good addition to a toolbox!
5 / 5 Wenona
Has been doing for my account the cars that do basic reparations, the little engine and tranny the transmissions etc. There Is undressed the few edges of aluminium and broken some rays on some years that cause annoying time-squandering questions. I have purchased one 3/8 & a 1/4 thumb torq the wrenches and am surprised so only in that is it far state overtightening rays. Some times and the resources have saved to break a less ray or not undressing was an edge of aluminium is a lot of value a modest prize for these wrenches.
5 / 5 Joaquin
Has learnt in this product of the neighbour. With which dress the one who easy this tool is to the use has decided to purchase my wrench of own torsion. Once a wrench has been received has comprised reason my neighbour he his favourite wrench: well fact, easily adjustable in order of pertinent torsion, and can be boss for any - I has assisted his woman also that uses this wrench. Now that has my own torsion the wrench will be occupied all the year around. Thank you Amazon and Vendor.
5 / 5 Arnetta
A true winner EPAuto 3/walk of 8 click of Wrench of Torsion of the thumbs, looks and feels likes that has written on him. Hope to take a lot of years of service of precision of him and a EPAuto 1/walk of 2 thumbs T W, I also bought of them. These are tools for all the professionals and DIY is also. When Doing the work for calm or the client, he well. Calm once is finalised doing an extracted manually, embezzle the sure that will last he for while some separates to do. Torsion All to the his specs, with these wrenches!
4 / 5 Kyung
Has bought this to do work in my tractor of gram and he awesome. Like this good to have precise torqued rays and. Any worry of undressed or has broken rays or threaded holes. A lot well the tool does well. It was not that hard in the every day use but for a homeowner the one who needs to torsion something occasionally this are adds. It feels like good quality. Heavy fact and chrome has covered takes partorisca rust control. If of good storage also. I defiantly buy this again.
5 / 5 Carolee
There is OCD when it comes to cure of mine car and these so only help me have piece to import when I my own work! This torsion the wrenches have been by means of the plot with me and the perfect still work! Calm so only am due to to keep well his and his reset to the his dipping his low plus when any into use, and tent in a half pertinent!
Can not beat a quality and prize of these!
4 / 5 Tricia
With which so only the dozen or like this uses, a ratcheting the mechanism undressed was and is now useless. I did not use it never on 40-lb-ft of torsion, as it was not never highly stressed. It is not partorisca value a hassle or side partorisca try for the ship behind on guaranteeed of then he so only cost -$ 40.

Has trusted some available positive critiques other buyers before I bought it. Too bad no alive until my expectations have based in these evaluations.

After this description has looked, EPAuto has left the commentary that would be necessary contacts him. After the brief conversation, send me to us the substitution, which has arrived in 2 days. I king-modify this description with which have used a substitution for the moment to see yes is more durable that an initial a.
5 / 5 Debra
To the time likes but in to time the tin very really listen a click, changing my caliper the has not listened a click that well like this the finishing torquing more than has to them that like this the retreat and king-torsion and look that a click is not like this strong but in timing when the uses by other rays that is main that a caliper rays, a click goes back the normal loudness. Dunno Reason he that in of the smallest rays.
4 / 5 Latoya
Horrible product, means it! It has used so only he for five minutes, am kidding, literally 5 minutes, is no longer to do! A train has maintained to slip, has not involved never. Ossia A worse tool I never bought, so only useful for 5 minutes. Bought the roughly done 3 month and when used the today to change oil of engine, is broken. It deserves 0 star, but some stars is a low plus can estimate this tool. It does not buy this junk otherwise will finalise to like me, waste $ 30 and your time in this piece of junk.
4 / 5 Maryetta
Unfortunately, was defective of a start. A selector/Sinister Legislation has not been connected to an iron like calm could not change a direction. Itd Cost more to drive my truck to topmast this behind like the little glue of steel has cured of him. Global works like this has to that and easy to use. I joint the fault of quality, good compraventa for prize.
4 / 5 Shari
Easy to read settings and I especially like a lock\unlock characteristic in a boss, remains opened until calm moves it to a place of lock. The accuracy is really well for wrench of torsion in this point of prize. It was the little concerned on some numbers in a be of the sleeve has painted on, but in fact is etched to a metal and underlined in aim.
4 / 5 Illa
Absolute junk. It does not squander your money in this worry you on that is doing on. It dip it to 15 pounds that is lower that a factory spec is for the Yamaha 701 chance of crank scrapes and the snapped immediately. Now I am stuck treating the question the big plus thanks to this wrench of rubbish.
4 / 5 Tonette
Has bought EPAuto 3/8.ºn Wrench of torsion to torsion down some rays of the boss in an Integrate, law perfectly, some numbers are easy to read and a wrench is easy to use. A wrench clicked every time to indicate has achieved my torsion wished spec, against some other experiences of users. Calm can not beat a quality of this wrench for a money. An only downside is when I have cleaned a tool takes some numbers of the adjustment painted in a black boss. Which has not gone too big of a @subject so it has had quite a lot of numbers has left for me to redraft some numbers with the a lot of-signal Sharpie pen to paint. Has-liked me a product so that has has bought already one 1/2 model.
4 / 5 Felix
This description is stops : EPAuto 3/Walk of 8 Click of Wrench of Torsion of the Thumbs
among the sturdy black of looks and plastic case to be a lot has built.
Has tried he partorisca hang the pocolos hanged of a boss and second that it can say is quite attentive for my purposes.
Some specifications for my car lug the dice are in the upper row of a tool (75 to 80 ft-lbs) and a wrench clicked reliably and clearly on all 20 lug given.
This was the shot adds down $ 20.
4 / 5 Camila
Has read a description attentively! This torsion of only measures in a clockwise direction doing it quite useless for bicycle inferior group the one who remain the threaded hand in a side. Calm felizmente tin a lot really overtightened he BB like this all is well, but could be bad is trusting on this to measure counter of torsion-in a clockwise direction.
4 / 5 Cortney
Used it when you arrive and do like this declared, used it the month later and does not do and was to store in zero. Ossia So only according to the time has used the device neither does the tactical or audible indication to dip.
4 / 5 Kiesha
Well you trust on this partorisca the BMW motorcycle... They require concrete torsions partorisca very all some rays. Also they have 'run over washers' done of of metal that has to that you so only run over enough.... As it has bought this... Dipped that ... Changed an oil... clicked ... Well... Well. Reset He, has changed a tranny fluent... He never clicked. Instead it undress out of some edges of aluminium. You are thinking 'I do not know that 22 nanometers or anything feels likes... It has done a bit another work and now nervous roughly reliability. Some the clicks to time another No. to time The long history shorter is I desire had not followed BMW the instructions and I desire had not bought this. The cause now has to that imagine was like the permanently fix the hole in a side of my type of motorcycle. Not to trust it .
5 / 5 Audrey
Has bought this to apply pertinent torsion when those substitutes some sparking plugs in mine Cub Fall mower. Dip it to 28 ft. lbs. And come from for presionar some discharge. Any click. Have has had to that take he so that it has been way too tight. I have been the Imposición of House and past more, but law properly. I have compared included a two in the lug die and this economic torsion the wrench has taken much more try take a click in a same setting like Husky wrench.

While it costs on two times as much as this piece of junk, a Husky Torsion the wrench has come with the lifetime (any one receipt) has guaranteeed of substitution. I guess I will be to spend this tool to my edges some day.
4 / 5 Faustina
When Ordering this torsion of particular model English tone, is not sure state was the good idea that considers a lot of descriptions have said to be difficult to regulate a dial of numbers of the rotation, but is not that bad, a force to regulate a dial was in a same as on 'Pittsburgh Pro' wrench of torsion that is to be purchase sooner, 'Pittsburgh Pro' the wrench has had to be substituted because tomb of the 5ft shelf and there is prendido to do, this torsion the wrenches am a lot delicate, needs to be careful any to fall them. An accuracy in a EPauto 3/8 wrench is quite well, a click is good and strong, a subject only sees with this torsion the wrench is that some numbers in a boss (10 to 80 pounds of feet markings) is quell'has bitten small (much smaller then a some on 'Load of Port/Pittsburgh Pro' English tone) to the equal that can be hard to read.
4 / 5 Josephine
This is not an attentive tool. Calm really think go to take a wrench of attentive torsion for $ 24? I have taken it casualidad been due to some good descriptions and a low prize. But this thing seriously in torsions. The majority of a time he a lot of click at all, any one @subjects the one who the forces have dipped on that. An example that has received has not been the tool of quality. Highly it recommends that it buy an expensive, done in tool of EUA with the certificate of calibration. If your application is enough of entity that requires the torsion English tone to take an exact value, then is enough of entity to buy the tool of quality.
4 / 5 Marvella
He so only torsions a lot rid fasteners. If you owe that torgue to the left there is rid threaded fasteners, this an is not an election. (Any in the date of ad has purchased mine, 'right hand so only or equivalent') Secondly, has tried several times to take the certificate of calibration of EPAuto. A statement is, +/- 4 accuracy or anything his claim is. 4 compared to that ? A nationally known level, or (Joe is) escome likes 26 ft lb of mine of torsion'. For torquing all fasteners to closeness of the each one another, is probably WELL. To be the quality attentive tool, look further. Certificate of calibration that been a accreditor of the accuracy is the one who calm really love & need. To the to Something likes him ISO 17025 or equivalent. This tool does not come with the certificate of any class, neither have I able summer to take one of them. Accuracy of 4 can mean a lot of things. It depends on you are torquing critic fasteners or no.
5 / 5 Myrtie
With on 600 descriptions and the big half indication have think that this would be the good compraventa . Unfortunately I owe that it has taken it the defective unit to the equal that am experiencing to to results looked like him some of other negative reviewers has taken. It was impressed initially to the equal that seats quite solid and a mechanism of adjustment has done well. But taking the account some negative critiques have decided to try the first. As I have dipped it hex ray of boss to my aim and dip a wench to 10 ft-lp and tried for presionar a tip the ray has resisted. Initially a still turned ray in an aim so it presionó on any plus and finally has taken a click. Then I reset a wrench to 15 ft-lp and has tried again but any click. It has gone back to 10 and it has taken a click and then behind to 15 this in spite of any click. As I have applied more pressure and a boss of ray sheared was!! In 15 ft-lp ossia ridiculous! I have then taken the piece 2x4 and there is drilled the hole in him and screwed he lag his ray. Again with a wrench dipped in 10 I has taken the click. Place in 15 any click and when I have augmented a pressure a boss of a lag ray sheared was!

Ossia Resulted resembled some the negative critiques have seen. A type sheared of rays in an engine and he am cost to plot for takes it has repaired. An only reason I need the torsion wench is my new gram mower warns against on or down that presiona a leaf that fulmine of trace and specifics the place of torsion. Like this the wrench is returned and probably will finalise with one of this torsion English tones with an indicator in the stairs. His no like this elegant like this class of the wrench but I think less prone to be defective.

UPDATE: I have finalised to take a Craftsman 9-32999 beam deflection wrench of torsion (available in the amazon but I took it directly of Sears and the little more economic). Used a same type of ray and is easily be to 15 ft-lp without hurting to a ray. It is trace to 30 ft-lb and a ray shear but again with an original wrench and in that has dipped that to him to 15 has not taken never the click and a ray so only sheared. Like this while a lot of people have had the good success with a mine of the wrench of the click has to that it has been defective. Again so only I require it for presionar leaves my new gram mower like this this new wench a lot when being any that the ratchet am extracted no big .
5 / 5 Kenna
Impressed like this far. It was one of some less expensive options and do like this announced like this far. It feels solid and well has built. Read some instructions, has 2 notes of entities. 1 Loosen given Inferior to regulate torsion. 2 beside dipping lower first to store to maintain calibration.

Shabby quite good.
5 / 5 Chang
Done well. A bit in a low end but for a prize the shot adds. Precise practice on some uncritical rays to take used to listen a 'click' or use the torsion of low plus that dips that dial up. No for ratcheting with which achieve a torsion. Cara until I can justify the fact in Giappone, EUA or wrench of torsion of the Germania. Be sure to store in dipping lower. Be sure to close place of torsion in. It requires some taking used to. Probably I will buy a 1/4 thumb version. The quality could be bit it better, jimo. Well for presionar sparking plugs, ray of casserole of the oil etc.
5 / 5 Chu
Adjuster Is really rough, included although a locknut is loosened all a way. Taking really hard to regulate it especially in a row of upper adjustment, has to dip the deep a lot of socket in just to create quite leverase to twist a adjuster. Has a 1/4 version of this wrench esatta and is really smooth likes is supposition to be. I am not sure I have received so only the lemon, but a calibration is attentive.
5 / 5 Cari
Used it to do the substitution of rotor of the brake in the scooter. Each ray in a picture was torqued to spec with this wrench although it was to grieve enough for a die of axial. They are quite happy with him, but think that some frames of notch he hard to be inner precise more than 5 N-m, and is hard to read in bad lighting or when it is greasy. Otherwise, A torsion the click of tope is noticeable and a boss is the good period for this law of torsion of big plus. It likes-me a chance among, but the cup taken on of the plot of spatial in mine @@@cofre of tool to the equal that can so only toss the.


Related YouTube Video: